Re: Sendmail for Large Sites
On Fri, Jun 18, 2004 at 01:06:34PM -0400, Jason Stewart wrote: > On 18/06/04 06:13 -0500, Martin McCormick wrote: > > > > There are other considerations such as the facts that all > > incoming and outgoing messages are checked for malicious attachments. > > ldap is used to drive the setting of customer mail delivery > > preferences and even their user ID choice. > > > > Hi Martin, > > Sendmail and Postfix can do the virus scanning. You're going to need > some serious firepower to scan all attachments for 25000 users. It depends on how much email these users are generating. I'm an admin for a small CS department at a liberal arts college. We support around 250 users (math, physics, CS, alums, and professors). On a normal day, we process between 1000 and 3000 messages. Our email server is a Dell Poweredge 2650 with dual 2.8GHz processors and 1GB of RAM. We run Sendmail with MailScanner, which in turn invokes its own testing rubrics and disarming routines along with SpamAssassin and ClamAV. Benchmarking this system indicated that we could process over 1,000,000 messages a day. And with MailScanner, incoming mail will queue up if MailScanner can't keep up for a while, so you never actually send back the temporary failure codes you have to use with milters. This system is hardly "big iron" (or any kind of iron, for that matter), and cost less than $5000. If he supports 25,000 users, he should be able to scare up at least that much money. -- -- Skylar Thompson ([EMAIL PROTECTED]) -- http://www.cs.earlham.edu/~skylar/ pgpK92bjvrM5N.pgp Description: PGP signature
Re: Migrating my mailhub from 4.9 to 5.x
On Wed, Jun 16, 2004 at 01:43:43PM +0200, Frank BONNET wrote: > Hello > > I am in the process to migrate my mailhub ( ~3000 mailboxes ) from 4.9 > to the next 5.x release to be able to use native nss_ldap and pam_ldap. > > I have tested the 5.2.1 version on another smallest machine and most > of my needings are working. > > BUT > > I need also to change the webmail I use actually as it seems to be not > supported anymore , this is IMHO working on the Roxen http server. > > I need a webmail that works with uw-imap ( mandatory ) and the maildox > format as I have to keep a large amount of mailboxes and don't want > want to use the maildir format for now. > > Any recommendations on the webmail I should use ? > I have tested some on my spare machine but really don't know how they > will work under a "production load" > > The machine is a HP/Compaq Proliant GL380 with 2 Gb RAM > and a lot of disk space. I'd highly recommend Squirrelmail (http://www.squirrelmail.org). I use it on a couple servers at work (a campus-wide server, and a server specific to the CS department), and it works great. It's got a good plugin system, and is reasonably fast (and with options to make it very fast). Another one to look at is OpenWebmail (http://openwebmail.org). I haven't used this in a production environment, so I don't have much practical knowledge of it. -- -- Skylar Thompson ([EMAIL PROTECTED]) -- http://www.cs.earlham.edu/~skylar/ pgpub1JvftV7J.pgp Description: PGP signature
Re: new server hardware recommendations ?
On Wed, Jun 16, 2004 at 01:28:56AM +0200, Stephan van Beerschoten wrote: > Hi Folks, > > I'm will be retiring my old and trusty rackmount machine soon and will > be purchasing a new one to replace it. The old one was a home-grown > combination of hardware, fitting into a 2U chassis. > > For its replacement however, I am looking for a more professional > system, including professional (hardware) support if needed, because I > will be trying to run some paid services of it. > Something from a vendor like Dell, IBM or HP/Compaq. > Something that preferably fits into 1U and can give me some degree of > hardware fault tolerance like a raid5 built-in on 3 disks. > I have seen something like this coming from Dell for example (allthough > I'd really rather use 2x AMD64, which Dell doesn't do ..) > > Anyway, who is using FreeBSD in a professional world on hardware like > this ? Anyone with a recommendation? > This 'swap' won't happen untill Q4 this year, so it will be running > 5-STABLE then. Please take this new platform into consideration for when > recommending new hardware. Although I can highly recommend Dell systems, FreeBSD has an annoying bug wrt to their 1U system (the Poweredge 1750) where the SCSI bus will hang if you have more than one device installed at boot time. This apparently doesn't happen if you have the $400 RAID option card installed; it only happens when the SCSI bus is a plain SCSI bus. Other than that, I've been very happy with Poweredges. We also have 2650 running FreeBSD 4.10, and it's been a pleasure to work with. It's blazingly fast (especially compared to our old dual P-III setup), reliable, and has FreeBSD support for *everything*. There's a software utility for the PERC RAID card (aaccli), a kernel support for the remote-access controller, etc. I'd highly recommend it. -- -- Skylar Thompson ([EMAIL PROTECTED]) -- http://www.cs.earlham.edu/~skylar/ pgp3IUGX3xVRI.pgp Description: PGP signature
Re: Cd burning and what app to use
On Sat, Jun 19, 2004 at 11:26:13PM -0400, Bruce wrote: > Hello all, > > Currently, I am running Gnome 2.6 and I am just wondering what cd > burning software is really good from the ports collection? > > I want to burn cd's from iso files or copy music cd's to cd's. > > Or make data cd's. burncd in the base system will do. -- Zeng Nan Simple is Beautiful. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: missing libintl.so.5 ??
I did a portupgrade -ruf gettext, and that fixed it. Thanks Luke, thanks List. -Original Message- From: Luke Kearney [mailto:[EMAIL PROTECTED] Sent: Saturday, June 19, 2004 10:05 PM To: Edward Carmody Cc: [EMAIL PROTECTED] Subject: Re: missing libintl.so.5 ?? On Sat, 19 Jun 2004 22:01:55 -0400 Edward Carmody <[EMAIL PROTECTED]> spake thus: > Hi, > > I've apparently botched a portupgrade (I think?)...when installing Apache2, > I get the following: > > = > [EMAIL PROTECTED] /usr/ports/www/apache2] # make install > ===> apache-2.0.49_1 depends on file: /usr/local/bin/perl5.6.1 - found > ===> apache-2.0.49_1 depends on file: /usr/local/bin/autoconf257 - not > found > ===>Verifying install for /usr/local/bin/autoconf257 in > /usr/ports/devel/autoconf257 > ===> Building for autoconf-2.57_1 > /libexec/ld-elf.so.1: Shared object "libintl.so.5" not found > *** Error code 1 > > Stop in /usr/ports/devel/autoconf257. > *** Error code 1 > > Stop in /usr/ports/www/apache2. > = > > I've googled, and tried upgrading gettext, I still don't have libintl.so.5 > on my system: > = > [EMAIL PROTECTED] /usr/ports/www/apache2] # find / -name libintl* > /usr/local/lib/libintl.so.6 > /usr/local/lib/libintl.so > /usr/local/lib/libintl.a > /usr/local/include/libintl.h > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.gl > ibc > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.so.6 > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.so > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.a > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.lai > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.h > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.so.6 > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.so > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.a > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.lai > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/libintl.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/libintl.h > [EMAIL PROTECTED] /usr/ports/www/apache2] # > = > > I've seen the same complaint about libintl.so.5 while trying to install > other ports; I don't know where to go from here. Any help is greatly > appreciated. you'll need to upgrade gettext and recursively at that too. umm portupgrade -uR gettext will probably fix your ails. HTH LukeK -- Luke Kearney <[EMAIL PROTECTED]> ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness(It's not. hear my story)
- Original Message - From: "Mark Jayson Alvarez" <[EMAIL PROTECTED]> To: "Lloyd Hayes" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, June 19, 2004 9:59 PM Subject: Re: FreeBSD weakness(It's not. hear my story) > Hi Lloyd, > >Let me share you my experience with learning > freebsd. I promise you... you'll throw away those > expensive books that you have bought after reading my > story.. > > A few months ago, I was totally a Windows user. > I've already heard about Linux from a friend but not > exactly Unix.. That friend of mine was convincing me > to use the same OS he's using but I refused to cause > I've seen nothing graphical with he's OS(running the > whole thing in Terminal without using any Desktop > environment). But then something bright have sparked > in my mind and decided to search Google for "best > Operating System". And so I've landed on Windows, > Freebsd, MacOS and, Linux comparison.. Of the four > OS's featured, I've never heard anything about FreeBSD > and so I went to their site to find out more... And my > journey began there... >After finishing the installation of Freebsd(using > only the handbook and nothing else) I've landed on > this so called terminal.. Mind you, I'm completely new > to Unix and I know not a thing, not even the "ls" > command.. Learning that FreeBSD is a Unix like > operating system, I began searching google for "Unix > commands" and I've downloaded something in PDF format > comparing the commands in MSDOS(which I'm used with) > and those that are used in Unix.. >And that's it!!! With a few resources at hand I was > able to do all of the things I used to do in Windows > without having too much trouble in FreeBSD.. > Now, I'm still reading FreeBSD's Handbook and I'm > already on the Chapter 19-Advance Networking.. > preparing my self for a career in Networking being > just a fresh graduate.. > I tell you... learning one thing is not about the > those fancy Documents and instructions that would help > you out along the way... It's about having that > willingness and passion to learn that thing.. It's > about having the confidence that, "hey, if they've > learned this, why can't I?!" Knowledge is a long race, > and don't you worry my friend.. you're not the last in > this race... 'cause no one has ever gone too far.. > >Hope this thought would help you out and all of > those beginners like "us" whom would want to dwell > into the simple but complicated world of Unix > computing... > > Regards to all Mailers > -jay:-) > > > Jay, You got the spirit. >From what you've said here, you went at it exactly like I did. Denny ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Cd burning and what app to use
Hello all, Currently, I am running Gnome 2.6 and I am just wondering what cd burning software is really good from the ports collection? I want to burn cd's from iso files or copy music cd's to cd's. Or make data cd's. Thanks, Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: cvsup coredump
There were some security problems with cvs awhile ago. I think it is unlikely that cvsup3.jpg.FreeBSD.org though would be suffering. Have you tried another cvsup server? Are you running the latest updates of FreeBSD? On Sun, 20 Jun 2004, John Lee wrote: > Why does it always coredump? > > Connecting to cvsup3.jp.FreeBSD.org > Connected to cvsup3.jp.FreeBSD.org > Server software version: SNAP_16_1h > Negotiating file attribute support > Exchanging collection information > Establishing multiplexed-mode data connection > Running > Updating collection src-all/cvs > make buildworld && make installworld Checkout > src/contrib/binutils/gas/config/obj-coff.c > *** > *** runtime error: > ***Segmentation violation - possible attempt to dereference NIL > ***pc = 0x9e634d9e > *** > use option @M3stackdump to get a stack trace > Abort trap (core dumped) > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
cvsup coredump
Why does it always coredump? Connecting to cvsup3.jp.FreeBSD.org Connected to cvsup3.jp.FreeBSD.org Server software version: SNAP_16_1h Negotiating file attribute support Exchanging collection information Establishing multiplexed-mode data connection Running Updating collection src-all/cvs make buildworld && make installworld Checkout src/contrib/binutils/gas/config/obj-coff.c *** *** runtime error: ***Segmentation violation - possible attempt to dereference NIL ***pc = 0x9e634d9e *** use option @M3stackdump to get a stack trace Abort trap (core dumped) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD 5.2.1 & OpenLDAP21-server won't start
I installed a minimal FreeBSD 5.2.1 Then installed Openldap21-server from ports with # make install clean Then installed a script cp /usr/ports/net/openldap21-server /usr/local/etc/rc.d/slapd.sh configured slapd.conf & ldap.conf manually started ldap with /usr/local/libexec/slapd start and everything worked but the script won't work. So then i viewed teh script and added the three lines to /etc/rc.d that was stated in the script. I rebooted and still ldap didn't start on boot but i can do it manually with /usr/local/libexec/slapd start Whats the deal? WHat am I doing wrong? -Dave ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mounting a multicard reader (FBSD)
I set up automount, but that's not working. usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered I also get this after a reboot now: umass0: vendor 0x55aa 8-in-2, rev 1.10/1.01, addr 3 umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED (da0:umass-sim0:0:0:0): got CAM status 0x4 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry I can't mount by hand now. I don't know if that has to do with the automounter: $ sudo mount -t msdos /dev/da0s1 /mnt/CF Just sits there doing nothing. $ sudo truss mount -t msdos /dev/da0s1 /mnt/CF readlink("/etc/malloc.conf",0xbfbff960,63) ERR#2 'No such file or directory' mmap(0x0,4096,0x3,0x1002,-1,0x0) = 67184 (0x28072000) break(0x807b000) = 0 (0x0) break(0x807c000) = 0 (0x0) lstat("/mnt",0xbfbfee30) = 0 (0x0) lstat("/mnt/CF",0xbfbfee30) = 0 (0x0) readlink("/mnt/CF","/host/localhost/CF",1023)= 18 (0x12) lstat("/host",0xbfbfee30)= 0 (0x0) lstat("/host/localhost",0xbfbfee30) = 0 (0x0) stalls there More of the same: umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED nfs server [EMAIL PROTECTED]:/host: not responding umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED At 01:31 AM 20/06/2004, Scott Mitchell wrote: What does 'camcontrol devlist' say? Probably it will just list one device (da0) that - as you've found - corresponds with the CF slot on your card reader. The other slots are probably mapped to other LUNs (Logical Unit Numbers) on the same SCSI device number. The CAM framework only probes LUN 0 by default, so you only see the first slot. For example, when my machine boots, I have: - http://www.bangrocks.com/ - http://www.auspug.org/ http://www.ZigZagSoft.com/ - PalmOS Software and "Palm Games Programming" forum ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Keyboard shortcuts for x windows system
On 2004-06-19 21:08, Douglas Korinke <[EMAIL PROTECTED]> wrote: > Running FreeBSD 4.9 and am trying to find a list of keyboard shortcuts > to help me exit the x windows system without the help of the mouse. CTRL+ALT+Backspace should bring down the entire X server. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: missing libintl.so.5 ??
On Sat, 19 Jun 2004 22:01:55 -0400 Edward Carmody <[EMAIL PROTECTED]> spake thus: > Hi, > > I've apparently botched a portupgrade (I think?)...when installing Apache2, > I get the following: > > = > [EMAIL PROTECTED] /usr/ports/www/apache2] # make install > ===> apache-2.0.49_1 depends on file: /usr/local/bin/perl5.6.1 - found > ===> apache-2.0.49_1 depends on file: /usr/local/bin/autoconf257 - not > found > ===>Verifying install for /usr/local/bin/autoconf257 in > /usr/ports/devel/autoconf257 > ===> Building for autoconf-2.57_1 > /libexec/ld-elf.so.1: Shared object "libintl.so.5" not found > *** Error code 1 > > Stop in /usr/ports/devel/autoconf257. > *** Error code 1 > > Stop in /usr/ports/www/apache2. > = > > I've googled, and tried upgrading gettext, I still don't have libintl.so.5 > on my system: > = > [EMAIL PROTECTED] /usr/ports/www/apache2] # find / -name libintl* > /usr/local/lib/libintl.so.6 > /usr/local/lib/libintl.so > /usr/local/lib/libintl.a > /usr/local/include/libintl.h > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.gl > ibc > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.so.6 > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.so > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.a > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.lai > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi > ntl.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.h > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.so.6 > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.so > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.a > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.lai > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint > l.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/libintl.la > /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/libintl.h > [EMAIL PROTECTED] /usr/ports/www/apache2] # > = > > I've seen the same complaint about libintl.so.5 while trying to install > other ports; I don't know where to go from here. Any help is greatly > appreciated. you'll need to upgrade gettext and recursively at that too. umm portupgrade -uR gettext will probably fix your ails. HTH LukeK -- Luke Kearney <[EMAIL PROTECTED]> ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Keyboard shortcuts for x windows system
Running FreeBSD 4.9 and am trying to find a list of keyboard shortcuts to help me exit the x windows system without the help of the mouse. Thanks again, Doug ICQ : 26096369 AIM : itss0lidstate ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
missing libintl.so.5 ??
Hi, I've apparently botched a portupgrade (I think?)...when installing Apache2, I get the following: = [EMAIL PROTECTED] /usr/ports/www/apache2] # make install ===> apache-2.0.49_1 depends on file: /usr/local/bin/perl5.6.1 - found ===> apache-2.0.49_1 depends on file: /usr/local/bin/autoconf257 - not found ===>Verifying install for /usr/local/bin/autoconf257 in /usr/ports/devel/autoconf257 ===> Building for autoconf-2.57_1 /libexec/ld-elf.so.1: Shared object "libintl.so.5" not found *** Error code 1 Stop in /usr/ports/devel/autoconf257. *** Error code 1 Stop in /usr/ports/www/apache2. = I've googled, and tried upgrading gettext, I still don't have libintl.so.5 on my system: = [EMAIL PROTECTED] /usr/ports/www/apache2] # find / -name libintl* /usr/local/lib/libintl.so.6 /usr/local/lib/libintl.so /usr/local/lib/libintl.a /usr/local/include/libintl.h /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.gl ibc /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi ntl.so.6 /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi ntl.so /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi ntl.a /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi ntl.lai /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/.libs/libi ntl.la /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.la /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-runtime/intl/libintl.h /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint l.so.6 /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint l.so /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint l.a /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint l.lai /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/.libs/libint l.la /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/libintl.la /usr/ports/devel/gettext/work/gettext-0.13.1/gettext-tools/intl/libintl.h [EMAIL PROTECTED] /usr/ports/www/apache2] # = I've seen the same complaint about libintl.so.5 while trying to install other ports; I don't know where to go from here. Any help is greatly appreciated. Ed Carmody ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness(It's not. hear my story)
Hi Lloyd, Let me share you my experience with learning freebsd. I promise you... you'll throw away those expensive books that you have bought after reading my story.. A few months ago, I was totally a Windows user. I've already heard about Linux from a friend but not exactly Unix.. That friend of mine was convincing me to use the same OS he's using but I refused to cause I've seen nothing graphical with he's OS(running the whole thing in Terminal without using any Desktop environment). But then something bright have sparked in my mind and decided to search Google for "best Operating System". And so I've landed on Windows, Freebsd, MacOS and, Linux comparison.. Of the four OS's featured, I've never heard anything about FreeBSD and so I went to their site to find out more... And my journey began there... After finishing the installation of Freebsd(using only the handbook and nothing else) I've landed on this so called terminal.. Mind you, I'm completely new to Unix and I know not a thing, not even the "ls" command.. Learning that FreeBSD is a Unix like operating system, I began searching google for "Unix commands" and I've downloaded something in PDF format comparing the commands in MSDOS(which I'm used with) and those that are used in Unix.. And that's it!!! With a few resources at hand I was able to do all of the things I used to do in Windows without having too much trouble in FreeBSD.. Now, I'm still reading FreeBSD's Handbook and I'm already on the Chapter 19-Advance Networking.. preparing my self for a career in Networking being just a fresh graduate.. I tell you... learning one thing is not about the those fancy Documents and instructions that would help you out along the way... It's about having that willingness and passion to learn that thing.. It's about having the confidence that, "hey, if they've learned this, why can't I?!" Knowledge is a long race, and don't you worry my friend.. you're not the last in this race... 'cause no one has ever gone too far.. Hope this thought would help you out and all of those beginners like "us" whom would want to dwell into the simple but complicated world of Unix computing... Regards to all Mailers -jay:-) --- Lloyd Hayes <[EMAIL PROTECTED]> wrote: > I finally decided that I needed to get more > information on FreeBSD. I > got it up and running, then I did something else and > I start getting > errors again > > So I just ordered 3 books on FreeBSD from Amazon. In > most of the reviews > posted there about the books, people were > complaining about weak > documentation, too much information about things > that they were not > interested in, and errors in the in the books which > seems to be the most > common complaint. In my very short recent history > with FreeBSD, I've > formed the opinion that documenting FreeBSD is it's > greatest weakness. > FreeBSD needs someone who can actually type to write > a good book for > beginners who have never seen UNIX code. A book is > needed with examples > that actually WORK! Examples that are explained in > plain English. There > seems to be very few books on FreeBSD around. > > I have decided that it is a very good operating > system which I need to > learn more about. And yes, I have all of the links > that everyone sent > me. Thanks for all of the info. > > -- > > Lloyd Hayes > > Email: [EMAIL PROTECTED] > URL: http://TalkingStaff.bravehost.com > E-FAX Number: (208) 248-6590 > Web Journal: http://lloyd_hayes.bravejournal.com/ > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 4.10 stable: xfree86 driver for ati rage xl chipset?
On Fri, Jun 18, 2004 at 04:36:26PM -0400, andrew kagan wrote: > Hi All: > > I've been trying to install xfree86 at the same time I'm installing 4.10 > stable. > > The graphical configuration tool comes up fine, but when I try to specify > the adapter, there's nothing in the list that refers to "ATI" at all. > > If I try to select the default vga adapter, after the config is written and > xfree86 attempts to load, my video doesn't work at all. > > Is there a way to drop out of xfree86 at this point, even before install has > completed? I can't proceed to complete the install at this point. > > Or should I be skipping configuration of xfree86 at this point and do it > after FreeBSD is installed? You might want to try installing FreeBSD stable without X, and then once installed go to: /usr/ports/x11/xorg And install this meta port of the X.Org X11R6.7.0 release. Once installed, follow the instructions at: http://freedesktop.org/XOrg/ConfigurationHelp I found that the best way to configure X11R6.7.0 is to first run (as root) X -configure, which does an excellent job of detecting my hardware. I next copy the resultant configuration file to the correct location as decribed, then carry out final tweaking using both manual editing of the config file and xorgcfg -textmode. X11R6.7.0 performs much more satisfactorily with my ATI Radeon 9200 graphics card and Iiyaya Vision Master 1451 monitor than I have been able to persuade XFree86 4.3.0 to do, and what helps greatly is that post installation configuration is simplicity itself. -- Anthony Edwards [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Miscellaneous Problems
Hi, I'm a 2 week old FreeBSD 4.9 user who has never used UN*X in my entire life and I was running into a few problems that I haven't been able to find help with. I have been attempting to get my pcmcia wireless card running on my laptop, I have identified the driver to install (wi), but am quite clueless on how to do so. Any help would be appreciated. Thanks a lot, Doug ICQ : 26096369 AIM : itss0lidstate ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness.
Hi Lloyd: I heartily recommend "FreeBSD: An Open-Source OS for your PC". by Annelise Anderson http://www.bsdmall.com/freebosforyo.html This is the book for absolute beginners. If you think a port is a place where ships dock and bash is a goth discoteque dance, then this is the book you should be reading. The next great resource are the tutorials by Dru Lavigne: FreeBSD Basics http://www.onlamp.com/pub/ct/15 Whether judged by pedagogic, technical or literary standards, Dru's articles are works of high perfection. Finally, I recommend getting Greg Lehey's "The Complete FreeBSD". The book is a great resource for technical details about FreeBSD 5.X. I found the sections on TCP/IP and the etc file system to be very helpfully. HTH Jonathan > I finally decided that I needed to get more information on FreeBSD. I > got it up and running, then I did something else and I start getting > errors again > > So I just ordered 3 books on FreeBSD from Amazon. In most of the reviews > posted there about the books, people were complaining about weak > documentation, too much information about things that they were not > interested in, and errors in the in the books which seems to be the most > common complaint. In my very short recent history with FreeBSD, I've > formed the opinion that documenting FreeBSD is it's greatest weakness. > FreeBSD needs someone who can actually type to write a good book for > beginners who have never seen UNIX code. A book is needed with examples > that actually WORK! Examples that are explained in plain English. There > seems to be very few books on FreeBSD around. > > I have decided that it is a very good operating system which I need to > learn more about. And yes, I have all of the links that everyone sent > me. Thanks for all of the info. > > -- > > Lloyd Hayes > > Email: [EMAIL PROTECTED] > URL: http://TalkingStaff.bravehost.com > E-FAX Number: (208) 248-6590 > Web Journal: http://lloyd_hayes.bravejournal.com/ > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: LED proggy question
Hey Hugo, Thanks for the info! I don't think that the rest of the list got the reply because "[EMAIL PROTECTED]" wasn't in one of the recipient fields. I don't know why the list doesn't include it. Regards, W. D. At 05:40 6/19/2004, [EMAIL PROTECTED], wrote: >Hey, > >I got this working, but only with a x-based program. I pkg_add'ed X and >started a small session with a xterm to be able to run this program (name >is xleds). For the interested guys, here is the script: > >ipfw-visual.sh: > >#!/bin/sh >tail -f /var/log/ipfw.log | \ > awk ' >$0 ~ /ICMP/ { >system("sh /scripts/scrlock"); >} >$0 ~ /TCP/ { >system("sh /scripts/numlock"); >} >$0 ~ /UDP/ { >system("sh /scripts/capslock"); >} >' > >all the /scripts/*lock consist of the following: > >#/bin/sh >xleds num >#sleep 0.05 >xleds num > >Change num for caps or scrl. I moved xleds to /usr/local/bin so don't need >a path. You can find this xleds thing easily on google :-) > >Initially I added a sleep delay, but when much traffic was being blocked >continuously it would keep on blinking the light a lot of time after >(because of the sleep delay), so later I removed this. > > > >Regards, > >Hugo >> At 14:08 6/18/2004, [EMAIL PROTECTED], wrote: >>>hey, >>> >>>I've been trying to find a program on the ports that allows me to change >>>the state of the keyboard LEDs. I want to put the keyboard on the room >>>wall and make a script to call a program which makes leds blink according >>>to the kind of traffic being blocked on the firewall. I want a program >>>like: >>> >>>blink 1 - blinks num lock >>>blink 2 - blinks caps lock >>>blink 3 - blinks scroll lock >>> >>>If there isn't such a program on the ports, perhaps someone with the >>>knowledge to write this program could do it ? I don't touch C for many >>>many years and couldn't find any function to do this. >>> >>>Any help appreciated! :-) >>> >>>Regards, >>> >>>Hugo >> >> Hugo, >> >> This sound insane, but very cool. Please let us know if you >> can get it to work. If FreeBSD has Linux emulation: >> http://www.Google.com/search?q=keyboard+kylix+%22num+lock%22+%22caps+lock%22 >> >> Start Here to Find It Fast!™ -> >> http://www.US-Webmasters.com/best-start-page/ >> $8.77 Domain Names -> http://domains.us-webmasters.com/ >> >> ___ >> [EMAIL PROTECTED] mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> "[EMAIL PROTECTED]" >> > > >-- >www.6s-gaming.com Start Here to Find It Fast! -> http://www.US-Webmasters.com/best-start-page/ $8.77 Domain Names -> http://domains.us-webmasters.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: OpenOffice and Java downloads are such a pain!
On Saturday 19 June 2004 07:32 pm, Bruce wrote: > I can't believe how much of a pain installing Open-Office 2.0 from the > ports collection is. The port fails and tells me I need to download a > file from Sun because of licensing restrictions... Be sure you're distinguishing between OOo and Java. The former isn't the cause. > so I download the file it tells me too. Then start the compiling over > again. Once again, I need a different file. This is driving me crazy. Now you know why noone regards Java as free software. -- Kirk Strauser pgp39qjWHBFH1.pgp Description: signature
Cannot compile jdk14 for Freebsd 5.2.1 - weired problem occures
make install ===> Installing for jdk-1.4.2p6_4 ===> jdk-1.4.2p6_4 depends on executable: javavm - found ===> jdk-1.4.2p6_4 depends on file: /usr/X11R6/lib/X11/fonts/URW/fonts.dir - found This is basically what happens: Please use `make -DWITH_DEBUG' if you want to install libraries and binaries with debugging support. ===> Generating temporary packing list ===> Checking if java/jdk14 already installed /bin/mkdir -p /usr/local/jdk1.4.2 cd /usr/ports/java/jdk14/work/control/make/../build/bsd-i586/j2sdk-image && /usr/bin/find . | -pdmu -R root:wheel /usr/local/jdk1.4.2 -pdmu: not found *** Error code 127 Stop in /usr/ports/java/jdk14 Thank you for your time and effort, Luke. __ Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. http://promotions.yahoo.com/new_mail ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
OpenOffice and Java downloads are such a pain!
I can't believe how much of a pain installing Open-Office 2.0 from the ports collection is. The port fails and tells me I need to download a file from Sun because of licensing restrictions, so I download the file it tells me too. Then start the compiling over again. Once again, I need a different file. This is driving me crazy. Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mounting a multicard reader (FBSD)
Fantastic! Thanks, Scott! That did the trick! At 01:31 AM 20/06/2004, you wrote: What does 'camcontrol devlist' say? Probably it will just list one device (da0) that - as you've found - corresponds with the CF slot on your card reader. The other slots are probably mapped to other LUNs (Logical Unit Numbers) on the same SCSI device number. The CAM framework only probes LUN 0 by default, so you only see the first slot. For example, when my machine boots, I have: # camcontrol devlist at scbus2 target 0 lun 0 (pass0,da4) which happens to by the SD/MMC slot on my four-slot reader. To make the other slots visible I do: # camcontrol rescan 2:0:1 # camcontrol rescan 2:0:2 # camcontrol rescan 2:0:3 # camcontrol devlist at scbus2 target 0 lun 0 (pass0,da4) at scbus2 target 0 lun 1 (da5,pass1) at scbus2 target 0 lun 2 (da6,pass2) at scbus2 target 0 lun 3 (da7,pass3) where the '2' and '0' come from the 'scbus' and 'target' parts of the devlist output - these will probably be different for your system. So now I have da{5,6,7} corresponding to the SmartMedia, CF and Memory Stick slots on my reader. I actually have all those 'camcontrol rescan' commands in my /etc/usbd.conf file, so everything is set up automatically when the reader is detected. You might also want to look into using the automounter to avoid having to mount things manually - it's pretty convenient to be able to plug in a card then just 'cd /flash/cf' (or whatever) to access it. Dan Pelleg wrote a pretty good article about this on DaemonNews last year: http://ezine.daemonnews.org/200305/cfmount.html Hope that's some help to you, Scott - http://www.bangrocks.com/ - http://www.auspug.org/ http://www.ZigZagSoft.com/ - PalmOS Software and "Palm Games Programming" forum ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: problems installing applications that need GTK
On stardate Sat, 19 Jun 2004, the wise Andy Harrison entered: On Sat, 19 Jun 2004 18:56:57 +0200 (CEST), Marco Beishuizen <[EMAIL PROTECTED]> wrote: It looks like a lot of programs need gtk20, which doesn't install correctly. When I try gtk20 the error is: Please clarify "doesn't install correctly." I always get the error: couldn't recognize the image file format for file './stock_add_16.png'. Marco -- If preceded by a '-' , the timezone shall be east of the Prime Meridian; otherwise, it shall be west (which may be indicated by an optional preceding '+' ). -- POSIX 2001 The "+" or "-" indicates whether the time-of-day is ahead of (i.e., east of) or behind (i.e., west of) Universal Time. -- RFC 2822 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: An easy virtual pop solution not involving qmail?
On Sun, Jun 20, 2004 at 12:15:30AM +0100, Chris Smith wrote: > Hi, > > I'm currently writing a proposal to replace our crapped out Redhat 9 web > server with FreeBSD 5-STABLE when it appears. In the process, I need to do > something with the mail server running on it. It's currently sendmail with > virtual domains and one user account per mailbox etc. Its performance is > piss poor and the users are complaining (there are 500 of the buggers and > they poll it all day and night). > > Is there an easier to manage solution that DOESN'T involve qmail where I > don't need to give users REAL accounts? I've seen several qmail-centric > documents floating around on the web but nothing concise and > straightforward. > > BTW - I'm not getting into a mail server religious war so don't even go > there ;-) > > Many Thanks, > > - Chris. Dovecot is an excellent and MTA-independant POP/IMAP-server, supporting virtual domains, virtual users, and various authentication mechanisms. Checkout ports/mail/dovecot or http://dovecot.procontrol.fi/ GH ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: An easy virtual pop solution not involving qmail?
"Chris Smith" <[EMAIL PROTECTED]> wrote: > Hi, > > I'm currently writing a proposal to replace our crapped out Redhat 9 web > server with FreeBSD 5-STABLE when it appears. In the process, I need to do > something with the mail server running on it. It's currently sendmail with > virtual domains and one user account per mailbox etc. Its performance is > piss poor and the users are complaining (there are 500 of the buggers and > they poll it all day and night). > > Is there an easier to manage solution that DOESN'T involve qmail where I > don't need to give users REAL accounts? I've seen several qmail-centric > documents floating around on the web but nothing concise and > straightforward. Postfix + Cyrus + LDAP. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
UFS2 and ufs2 documentation ?
Quick question - when I run `mount` or view /etc/fstab in fbsd 5.x, I just see "ufs" as the filesystem type. How can I get some kind of output that assures me that those volumes are indeed UFS2 volumes ? How do I verify that ? Second, where can I find documentation on ufs2 and snapshotting, etc. ? There is no 'ufs2' manpage, and the mksnap_ffs man page is about 20 lines long ... where can I find more documentation ? thanks. - Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: An easy virtual pop solution not involving qmail?
On Saturday 19 June 2004 06:15 pm, Chris Smith wrote: > Is there an easier to manage solution that DOESN'T involve qmail where I > don't need to give users REAL accounts? I'm using Cyrus IMAP (and POP) on my FreeBSD server. There is no direct correlation between Cyrus accounts and system accounts, unless you go out of your way to make it so. Authentication can be against a private database, Kerberos, an LDAP server, or anything else you can bind Cyrus SASL to. Also, while I'd previously used Sendmail as the MTA, I recently switched to Postfix without changing a single bit of the backend configuration. I mention this because it was important to me that I not be tied to a particular MTA. Hope this helps! -- Kirk Strauser pgpewqMx2Licy.pgp Description: signature
An easy virtual pop solution not involving qmail?
Hi, I'm currently writing a proposal to replace our crapped out Redhat 9 web server with FreeBSD 5-STABLE when it appears. In the process, I need to do something with the mail server running on it. It's currently sendmail with virtual domains and one user account per mailbox etc. Its performance is piss poor and the users are complaining (there are 500 of the buggers and they poll it all day and night). Is there an easier to manage solution that DOESN'T involve qmail where I don't need to give users REAL accounts? I've seen several qmail-centric documents floating around on the web but nothing concise and straightforward. BTW - I'm not getting into a mail server religious war so don't even go there ;-) Many Thanks, - Chris. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: problems installing applications that need GTK
On Sat, 19 Jun 2004 18:56:57 +0200 (CEST), Marco Beishuizen <[EMAIL PROTECTED]> wrote: > > It looks like a lot of programs need gtk20, which doesn't install > correctly. When I try gtk20 the error is: Please clarify "doesn't install correctly." -- Andy Harrison ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Disabling DHCP
On Saturday 19 June 2004 05:11 pm, Geert Hendrickx wrote: > > I want to turn DHCP on my router off. > > How can I use FreeBSD to get an IP addresss from it? When the system > > boots, it runs dhclient, which hangs for awhile before getting anything. > > > > What is the better way? > > Using a fixed IP, by adding > > defaultrouter="192.168.1.2" > ifconfig_ed1="inet 192.168.1.210 netmask 255.255.255.0" > > to your /etc/rc.conf (be sure to substitute your device and the correct > ip's), and listing the nameserver(s) in /etc/resolv.conf > > That way you won't need your DHCP-server anymore. I think this advice is correct if the router is set up just so. It could break your network connection if not. What sort of service do you have? e.g. DSL, cable modem, T1, ...? Did your ISP assign you a fixed IP address (or block of addresses)? More information might help you get a better quality answer. If nothing else, type 'ifconfig -a' & post that result here. hth, Jay ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Sendmail for Large Sites
On Friday 18 June 2004, Martin McCormick wrote: >How well does the administration of Sendmail scale up to sites > serving as many as 25,000 users? << ... >> > My thanks to everybody who answered my questions. If we end > up doing major revisions to our present mail system, I will have this > information to contribute to the discussion. My experience with > sendmail is very positive, but very limited. I am well aware that one > person receiving a couple of hundred messages a day on one work > station is no indicator of how the same MTA might work when hundreds of > thousands of messages and bounces are roaring around the mail server > every day. Again, thank you all. Don't forget that the sendmail.org folks also offer a "commercial version" of sendmail that includes (iirc) some "enhanced" administration tools, and technical support. hth, Jay ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Disabling DHCP
On Sat, Jun 19, 2004 at 02:40:41PM -0700, Dave wrote: > > I want to turn DHCP on my router off. > How can I use FreeBSD to get an IP addresss from it? When the system > boots, it runs dhclient, which hangs for awhile before getting anything. > > What is the better way? Using a fixed IP, by adding defaultrouter="192.168.1.2" ifconfig_ed1="inet 192.168.1.210 netmask 255.255.255.0" to your /etc/rc.conf (be sure to substitute your device and the correct ip's), and listing the nameserver(s) in /etc/resolv.conf That way you won't need your DHCP-server anymore. GH ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD Wiki
On Saturday 19 June 2004 02:54 pm, Andy Smith wrote: > Not wishing to step on Kirk's toes but there is another one at the > URL in my signature [...] No toe-stepping was inferred. :) As you said, making it available is the important part. -- Kirk Strauser pgpij0IgDYlsD.pgp Description: signature
Disabling DHCP
I want to turn DHCP on my router off. How can I use FreeBSD to get an IP addresss from it? When the system boots, it runs dhclient, which hangs for awhile before getting anything. What is the better way? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness.
--- Lloyd Hayes <[EMAIL PROTECTED]> wrote: > I finally decided that I needed to get more > information on FreeBSD. I > got it up and running, then I did something else and > I start getting > errors again > > So I just ordered 3 books on FreeBSD from Amazon. In > most of the reviews > posted there about the books, people were > complaining about weak > documentation, too much information about things > that they were not > interested in, and errors in the in the books which > seems to be the most > common complaint. In my very short recent history > with FreeBSD, I've > formed the opinion that documenting FreeBSD is it's > greatest weakness. > FreeBSD needs someone who can actually type to write > a good book for > beginners who have never seen UNIX code. A book is > needed with examples > that actually WORK! Examples that are explained in > plain English. There > seems to be very few books on FreeBSD around. > > I have decided that it is a very good operating > system which I need to > learn more about. And yes, I have all of the links > that everyone sent > me. Thanks for all of the info. > > -- > > Lloyd Hayes > > Email: [EMAIL PROTECTED] > URL: http://TalkingStaff.bravehost.com > E-FAX Number: (208) 248-6590 > Web Journal: http://lloyd_hayes.bravejournal.com/ > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > Hello Lloyd, I must say that there may not be as much documentation about FreeBSD as there is to other operating systems. However the documentation that does exist is of high quality. If your looking for an intorductory book: FreeBSD: An Open-Source Operating System for Your Personal Computer, Second Edition (with CD-ROM) by Annelise Anderson ISBN: 0971204519 Also the FreeBSD handbook is an excellent reference: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ Additional articles published by O'Reilly / Onlamp have a great beginners section (FreeBSD basics and Big Scary Daemons): www.onlamp.com/bsd Another set of good articles: http://www.daemonnews.org/new2bsd/ http://www.freebsd.org/projects/newbies.html Hope this helps, Pete __ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness.
On Sat, 2004-06-19 at 15:40, Jorn Argelo wrote: > Lloyd Hayes wrote: > > > I finally decided that I needed to get more information on FreeBSD. I > > got it up and running, then I did something else and I start getting > > errors again > > > > So I just ordered 3 books on FreeBSD from Amazon. In most of the > > reviews posted there about the books, people were complaining about > > weak documentation, too much information about things that they were > > not interested in, and errors in the in the books which seems to be > > the most common complaint. In my very short recent history with > > FreeBSD, I've formed the opinion that documenting FreeBSD is it's > > greatest weakness. FreeBSD needs someone who can actually type to > > write a good book for beginners who have never seen UNIX code. A book > > is needed with examples that actually WORK! Examples that are > > explained in plain English. There seems to be very few books on > > FreeBSD around. > > Beginners who never seen UNIX coude shouldn't start with FreeBSD in the > first place, if you ask me. They should start Mandrake Linux or SuSe or > something of the sorts. FreeBSD isn't made to make an "user friendly" > operating system, as Mandrake Linux is aiming at. You just have to know > some Unix stuff before you even start with FreeBSD. I would have to disgree having my first *nix experience five years ago with Mandrake and switching to FreeBSD a number of months ago. I switched to FreeBSD because I felt my unix skills were getting rusty. When I started with Mandrake I did most of my system configuration and administration from the command line and I learned a lot of unix in those first few years. Over time with the inclusion of more GUI based tools that became harder. Files seemed to keep moving or configuration was spread across too many files. I believe you end up becomming too dependant on the distribution specific configuration tools with Linux and you don't truely learn the system. For anyone who really wants to learn unix the BSDs are the place to start. Linux is for people who hate Micro$oft. BSD is for people who love Unix. Tom > I have the book on the below link, and I must say it is very very good. > Good examples and clearly elaborated, though it lacks in-depth > information, which might be handy for more advanced users. It's good for > beginners who are comfortable in a Unix or Linux enviroment. Why don't > you give that one a shot? > > http://www.amazon.com/exec/obidos/tg/detail/-/0072224096/104-0798845-8369533?v=glance > > And what about our own FreeBSD Handbook? Don't tell me that that is bad, > because there is book that can beat it if you ask me. > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ > > Cheers, > > Jorn > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD Wiki
On Sat, Jun 19, 2004 at 01:46:45PM +0100, Graham Bentley wrote: > I have used in the past Trustix Linux which has a nice Wiki > page http://doc.trustix.org/cgi-bin/trustixdoc.cgi?TrustixWiki [...] > Is there any such resource for FreeBSD ? Not wishing to step on Kirk's toes but there is another one at the URL in my signature - also not official of course. If you have time to write documentation that doesn't already exist, please do put it *somewhere* no matter where that is (as long as google can find it). :) -- http://freebsdwiki.org/ - Encrypted mail welcome - keyid 0xBF15490B "[Open Source is] like trying to sell human rights to China because it might lead to more effective business models." -- David Kastrup, news:gnu.misc.discuss pgp0B2P0BJkA1.pgp Description: PGP signature
Re: This is a test
On Sat, Jun 19, 2004 at 09:59:49AM -0400, Bruce wrote: > This is a test! > > Bruce It worked ;-) but please use freebsd-test@ for this. GH ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
flayra@overmind.org no longer valid
Hello there, Due to getting thousands of messages of spam every day, I had to shut off this account. Please head on over to http://www.unknownworlds.com to get my new contact info if needed. Sorry for the inconvenience. -Charlie ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: any use to build from source?
On the other hand, the OpenBSD-people advise using packages instead of ports. See http://www.openbsd.org/faq/faq8.html#PortsvsPkgs I guess it's just a matter of personal taste and needs. GH On Sat, Jun 19, 2004 at 05:11:22PM +0300, Giorgos Keramidas wrote: > On 2004-06-19 10:58, Patrick Useldinger <[EMAIL PROTECTED]> wrote: > > Giorgos Keramidas wrote: > > > > > Before I answer to this question, I cannot help noting that you don't > > > *HAVE* to compile everything from source. In fact, if you install a > > > RELEASE version of FreeBSD and use pkg_add to install the binary, > > > precompiled packages of just the applications you are going to > > > use... there is absolutely no need to rebuild anything from source. > > > > True for the CDs. But once you want to upgrade, things get more > > complicated. For example, I did not find a package for OpenOffice 1.1.1 > > in the "offical" places, although OO is certainly an excellent candidate > > for a package. > > Indeed, packages-4-stable, packages-4.10-release on ftp.freebsd.org > don't include openoffice. A search at google though yields: > > http://projects.imp.ch/openoffice/ > > which does list FreeBSD packages of OO-1.0.3 and OO-1.1.0 :-) > > > This led me to the conclusion that packages, in the FBSD world, are > > considered less important than the very well maintained ports. > > The ports people are going through a lot of effort to build, test and > package the maximum possible number of ports before each release. > > > I would prefer it to be the other way round: go for packages, unless you > > want to tweak anything. > > This is preferable from the end-user's perspective, but I think it would > exponentially increase the number of precompiled binaries the mirrors > would have to keep available. If a port has 3 options and depends on > another with 4 options, to host every possible combination that one > might want on the FTP site 12 different combinations would have to be > built and packaged! With thousands of ports in the tree this means a > mind-boggingly huge number of different builds and packages can be built. > > Is it possible to satisfy all the users with precompiled packages? No. > > So, going for ports and using packages only is a bit difficult :-/ > > > I do not agree with an earlier argument, which was that you could change > > the source. I have been programming for 25 years now, I am certain that > > you don't change code, not even in a reasonably sized project, without > > spending a large amount of time. > > I have a local patch to fetchmail in my local /usr/ports tree that fixes > a bug recent versions have with APOP: > > : [EMAIL PROTECTED]:05]/usr/ports/mail/fetchmail# cvs -q up -APd > : ? files/patch-zz::apop_bug > : [EMAIL PROTECTED]:05]/usr/ports/mail/fetchmail# > : > : [EMAIL PROTECTED]:06]/usr/ports/mail/fetchmail# cat files/patch-zz\:\:apop_bug > : --- driver.c.orig Sun Mar 28 13:29:15 2004 > : +++ driver.cSun Mar 28 13:49:42 2004 > : @@ -429,7 +429,7 @@ > : /* for POP3, we can get the size of one mail only! Unfortunately, this > : * protocol specific test cannot be done elsewhere as the protocol > : * could be "auto". */ > : - if (ctl->server.protocol == P_POP3) > : + if (ctl->server.protocol == P_POP3 || ctl->server.protocol == P_APOP || > ctl->server.protocol == P_RPOP) > : fetchsizelimit = 1; > : > : /* Time to allocate memory to store the sizes */ > > This is a serious showstopper for anyone who uses fetchmail and doesn't > want to fetch all the messages in one connection (for whatever reasons). > > It didn't take me more than 15 minutes to write, but then I'm working as > a programmer so that's "normal". Fetchmail is, IMHO, a reasonably sized > project. I'm not saying this to sound insulting to you in any way, or > to boast about my ''l33t h4x0r skillz'' -- that's nonsense. I am only > bringing it up as a good example where building the port *does* have > obvious advantages. > > - Giorgos > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness.
Lloyd Hayes wrote: I finally decided that I needed to get more information on FreeBSD. I got it up and running, then I did something else and I start getting errors again So I just ordered 3 books on FreeBSD from Amazon. In most of the reviews posted there about the books, people were complaining about weak documentation, too much information about things that they were not interested in, and errors in the in the books which seems to be the most common complaint. In my very short recent history with FreeBSD, I've formed the opinion that documenting FreeBSD is it's greatest weakness. FreeBSD needs someone who can actually type to write a good book for beginners who have never seen UNIX code. A book is needed with examples that actually WORK! Examples that are explained in plain English. There seems to be very few books on FreeBSD around. Beginners who never seen UNIX coude shouldn't start with FreeBSD in the first place, if you ask me. They should start Mandrake Linux or SuSe or something of the sorts. FreeBSD isn't made to make an "user friendly" operating system, as Mandrake Linux is aiming at. You just have to know some Unix stuff before you even start with FreeBSD. I have the book on the below link, and I must say it is very very good. Good examples and clearly elaborated, though it lacks in-depth information, which might be handy for more advanced users. It's good for beginners who are comfortable in a Unix or Linux enviroment. Why don't you give that one a shot? http://www.amazon.com/exec/obidos/tg/detail/-/0072224096/104-0798845-8369533?v=glance And what about our own FreeBSD Handbook? Don't tell me that that is bad, because there is book that can beat it if you ask me. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ Cheers, Jorn ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness.
On Sat, 2004-06-19 at 14:23, Lloyd Hayes wrote: > I finally decided that I needed to get more information on FreeBSD. I > got it up and running, then I did something else and I start getting > errors again > > So I just ordered 3 books on FreeBSD from Amazon. In most of the reviews > posted there about the books, people were complaining about weak > documentation, too much information about things that they were not > interested in, and errors in the in the books which seems to be the most > common complaint. In my very short recent history with FreeBSD, I've > formed the opinion that documenting FreeBSD is it's greatest weakness. > FreeBSD needs someone who can actually type to write a good book for > beginners who have never seen UNIX code. A book is needed with examples > that actually WORK! Examples that are explained in plain English. There > seems to be very few books on FreeBSD around. Of the free OSs I think the different BSDs tend to be the better documented. Along with the man pages (don't short them, some can be obtuse at times but overall they give me what I need most of the time), this has served as my primary source of documentation for FreeBSD: http://www.freebsd.org/docs.html Book wise, there are more on Linux. This is starting to change though which is great. I think what you are looking for isn't necessarilly a FreeBSD specific book, though having at least one is great, but a general unix primer to help you get more familiar with unix concepts. I remember when I started toying around with linux and stared at the command line not knowing what to do. I had "Running Linux" back then which had a great intro to such things like file permissions, users/groups, and navigating around the system. Since I really can't from looking at my bookshelf, can anyone recommend a book with a few good chapters on general unix concepts to get a completely green user familiar and comfortable with "the way things are done"? Comming from $OTHER_OS to unix can be daunting but once you get the basics down, you start to complain that $OTHER_OS is too hard to do what you want. :) Tom > I have decided that it is a very good operating system which I need to > learn more about. And yes, I have all of the links that everyone sent > me. Thanks for all of the info. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Application commands without having to restart
On Sat, Jun 19, 2004 at 05:27:02PM +0300, Giorgos Keramidas wrote: > I don't remember about zsh, but I think it has a 'rehash' command too. > > GNU bash should take care of this automagically. zsh needs the 'rehash' command; bash does not. --Mac -- Julian "Mac" Mason [EMAIL PROTECTED] Computer Science '06 (909)-607-3129 Harvey Mudd College ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD weakness.
Lloyd Hayes wrote: I finally decided that I needed to get more information on FreeBSD. I got it up and running, then I did something else and I start getting errors again So I just ordered 3 books on FreeBSD from Amazon. In most of the reviews posted there about the books, people were complaining about weak documentation, too much information about things that they were not interested in, and errors in the in the books which seems to be the most common complaint. In my very short recent history with FreeBSD, I've formed the opinion that documenting FreeBSD is it's greatest weakness. FreeBSD needs someone who can actually type to write a good book for beginners who have never seen UNIX code. A book is needed with examples that actually WORK! Examples that are explained in plain English. There seems to be very few books on FreeBSD around. I have decided that it is a very good operating system which I need to learn more about. And yes, I have all of the links that everyone sent me. Thanks for all of the info. Hi Lloyd, Welcome to the FreeBSD Questions Mailinglist! We try to help persons who have issues with their installations, etc. And you are one of those persons we want to try and help. However, we can help you if you give more information, what errors do you get? Do you perhaps know what you did which caused those errors? From what moment did those errors arise? What links did you get? Did people refer to the handbook? http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html or the faq? http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/index.html or where? And what books did you order? Perhaps they are outdated, or not very up to date anymore. What version are you running? Oh, and you can contribute, read the handbook and faq, and create some articles, which you think need to be linked with freebsd so that anyone can use them. You can find more information for that here: http://www.freebsd.org/docproj/index.html I hope this helped a little, Cheers -- Kind regards, Remko Lodder |[EMAIL PROTECTED] Reporter DSINet|[EMAIL PROTECTED] Projectleader Mostly-Harmless |[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD weakness.
I finally decided that I needed to get more information on FreeBSD. I got it up and running, then I did something else and I start getting errors again So I just ordered 3 books on FreeBSD from Amazon. In most of the reviews posted there about the books, people were complaining about weak documentation, too much information about things that they were not interested in, and errors in the in the books which seems to be the most common complaint. In my very short recent history with FreeBSD, I've formed the opinion that documenting FreeBSD is it's greatest weakness. FreeBSD needs someone who can actually type to write a good book for beginners who have never seen UNIX code. A book is needed with examples that actually WORK! Examples that are explained in plain English. There seems to be very few books on FreeBSD around. I have decided that it is a very good operating system which I need to learn more about. And yes, I have all of the links that everyone sent me. Thanks for all of the info. -- Lloyd Hayes Email: [EMAIL PROTECTED] URL: http://TalkingStaff.bravehost.com E-FAX Number: (208) 248-6590 Web Journal: http://lloyd_hayes.bravejournal.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD Wiki
On Saturday 19 June 2004 07:46 am, Graham Bentley wrote: > Is there any such resource for FreeBSD ? It's not official, but I host exactly such a thing at: http://subwiki.honeypot.net/cgi-bin/view/Freebsd/WebHome -- Kirk Strauser pgpOGhUD3RzKM.pgp Description: signature
Re: any use to build from source?
On 2004-06-19 17:59, Patrick Useldinger <[EMAIL PROTECTED]> wrote: > Giorgos Keramidas wrote: > > > >Is it possible to satisfy all the users with precompiled packages? > >No. > > My argument is the other way round: build a package will *all* available > options. It will be bloated, but still smaller (in download size) and > faster to install. If you like it, keep it, and want to tweak it > afterwards, OK, go for it, the investment is worthwile > > That makes one single package that should suit everybody (unless options > are mutually exclusive, of course, but that's not often the case AFAIK). Heh. Not really. For instance, it wouldn't suit me. I know it sounds a bit selfish, but I mean that someone, somewhere will want their ports trimmed in size and features to suit exactly what they need and only that. Building all the features and all the possible modules of all the packages and installing all of them, at the same time, is the "Redhat, Mandrake and Fedora philosophy" that I specifically wanted to avoid when I first came to BSD. I sure hope size-bloat and feature-bloat in packages does not become the BSD standard any time soon now :( > That is indeed a reasonable example, but I am not sure there are many > of them. Maybe. I'm not the one to judge; that's for sure. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
recording from a dlink dsb-r100 usb radio.
I'm trying to become sound savy. I have a D-Link DSB-R100 usb radio, and Sony Vaio PCG-Z505-JE laptop running: FreeBSD rosebud.alerce.com 4.9-RELEASE-p5 FreeBSD 4.9-RELEASE-p5 #20: Tue Apr 20 10:02:23 PDT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ROSEBUD i386 I kldload the ufm.ko module, plug it in, and I can control it with Warner's (I think) little ufmctl program. It tunes, mutes, etc... just fine. In particular, it sounds perfectly reasonable for an fm radio. I'm trying to record stuff, and the results that I'm getting sound like crap. I've been using sox, in two configurations I cribbed from the web: sox -v 1.0 -t ossdsp /dev/dsp -w -r 44100 -t cdr - sox -t ossdsp /dev/audio -t .wav -r 44100 -c 2 - Both of them end up sounds lousy when I play them back in xmms, much worse than listening to it directly. Can anyone comment on how I might get better recordings? I'll happily supply more information on request (I'm not sure what else to supply though...). g. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: blocking internally
On Jun 19, 2004, at 06:11, John Lee wrote: hi, i have 7 ips on one box, however they can't connect internally to each other IP ports. please advise. Counting below, you only reference 6 IP addresses on the box: 63.223.65.192, 63.223.65.193, 63.223.71.2, 63.223.71.3, 63.223.71.4, and 63.223.71.5. What's the seventh one? here's my setup: rc.conf: defaultrouter="63.223.65.1" ifconfig_sis0="inet 63.223.65.192 netmask 255.255.255.0" /etc/ips.added: ifconfig sis0 inet 63.223.65.193/32 alias Ok. BTW, these statements indicate that you own an entire class C of public address space. That seems unlikely, and if it's not the case, you shouldn't be using the addresses. ifconfig sis0 inet 63.223.71.2/32 alias ifconfig sis0 inet 63.223.71.3/32 alias ifconfig sis0 inet 63.223.71.4/32 alias ifconfig sis0 inet 63.223.71.5/32 alias Problem here. These addresses are not in the same subnet as the primary address (63.223.65.0/24). Therefore you shouldn't use a /32 for them, you should use the actual netmask. This is definitely true for the FIRST 63.223.71.x address, and I *think* it's true for the others as well. I've never actually seen an example of assigning multiple IPs for a second subnet under FreeBSD. route add 63.223.65.193 63.223.65.1 This is broken. You're saying "route any traffic this host is sending, destined for itself, to an external gateway". I really doubt you want to do that. route add 63.223.71.2 63.223.71.1 route add 63.223.71.3 63.223.71.1 route add 63.223.71.4 63.223.71.1 route add 63.223.71.5 63.223.71.1 Again broken, for the same reasons. You don't normally enter routing statements for your OWN IP addresses, you enter routing statements that describe how to reach OTHER addresses/networks. KeS ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
problems installing applications that need GTK
Hi, Since I upgraded to 4.10-STABLE I have a lot of problems installing programs. Trying to install by FTP with sysinstall always results in errors and sysinstall core dumps when it's accessing the cdrom. Also installing from the ports results in a lot of errors. It looks like a lot of programs need gtk20, which doesn't install correctly. When I try gtk20 the error is: ... failed to load "./stock_add_16.png": Couldn't recognize the image file format for file './stock_add_16.png' *** Error code 1 ... What can I do to install gtk20? Thanks, Marco -- Just because everything is different doesn't mean anything has changed. -- Irene Peter ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CMS Software
Graham Bentley wrote: Hi, I was wondering if anyone can comment on the following :- I am looking to install some CMS software and to run my web site long term on FreeBSD. I am thinking something on the lines of phpWebsite, PostNuke/PhpNuke or similar (ie easy for me to install and maintain / update - don't need buckets of features just basic simple / effective / reliable) I'll need Apache, MySQL, PHP Graham, Give mambo a try (www.mamboserver.com). I've tried PostNuke/PhpNuke and Mambo and I have found a little easier to set-up for a basic CMS. Mike I read somewhere once that after the initial install and update of FreeBSD all that was required was a simple make in the postnuke ports directory and this action woudl go away and fetch everything that was required, install it and write out basic / sensible conf files then run the appropriate services. If this is true, and it works then I am even more impressed with FreeBSd than I first thought. So, if you are using any kind of CMS for your website and have done the above can you make recommendations ? Thanks 3BSDee'ers ! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 5.2.1 - Joke-only release ? April Fools ??
So the question is, has any person, anywhere, at any time, successfully installed 5.2.1-RELEASE on any hardware whatsoever ? Or is it just a practical joke release ? I'm not going to tell you again that the installation media is bad, because everybody else said that already. But something that I do wish to say is that I am wondering why it is always the fault of the software, and not the person itself. I mean, think about it, do you truely think a project like FreeBSD would release software that is _that_ unstable? Thousands, ten thousands of people are using it daily for their server or workstation needs. Aren't you going to think then that it might be a problem which lies with you and not the software? Why don't we take our friend Bill's software for example? Starting from Windows NT4, it has been a good operating system for both servers and workstations. You can't say it's bad, because it's probably being maintained by a bad system adminstrator then. It's the programs running on Windows that can make it run bad (spyware, malware, viruses, bad drivers, name it up). People always bash Microsoft for security exploits, but FreeBSD and Linux people have to patch their machines as well because of security exploits. Why don't they ever give a kick when they have to patch their *nix machine, and they all blame, curse, troll and flame on Microsoft and Windows, but we forget that Windows developers are humans as well. Anyway, this is going too much offtopic. Pardon my obvious frustration, but I am quite tired of people bashing and trolling on software like this before they even think about their problem. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Turning off sshd version display when someone telnets to port.
Emperor of Florida wrote: [ ...concealing the purpose of a port... ] Currently when you telnet to it you will see: Escape character is '^]'. SSH-1.99-OpenSSH_3.6.1p1 YbrickRd As Jeremy said, SSH depends on exchanging the version of the procotols it is using in order for both sides to figure out what types of cryptography they can use. You have already improved the security of your installation significantly, and to the point where any gains beyond this are going to require heroic measures. You might consider setting up IPsec, or blocking inbound SSH connections from all but a few IP addresses, or changing SSH to use OPIE rather than reusable passwords. -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Redirection with a bridge ?
Matt Juszczak wrote: Is there a way to do IP redirection without using layer 3? (IPNAT or routing)? I have a bridge setup and want to redirect any port 80 traffic outgoing through the bridge to a specific server but it seems I can only do this with ipfw's forward/fwd or ipnat's rdr commands ... which are all layer 3 oriented and dont work with just a bridge... Well, you can use layer-2 bridging to forward network traffic to any directly connected physical subnet you want to, and you can use "ifconfig alias" to give machines on that subnet multiple IPs. If a machine sees traffic to its MAC address and/or is in promiscuous mode (which is what a FreeBSD bridge sets the interfaces it uses to), the machine will pay attention to those packets. If the packets contain IP addresses which the machine believes belong to it, then it will respond appropriately. Frankly, however, I suspect that you are confusing yourself more than you are solving the problem you actually want to solve. :-) Given a sufficiently complex set of firewall rules, packet forwarding, NAT re-writing, and whatever else, you can mangle packets in pretty much any way one can think of. Do this only when you need to, to the extent that is useful. If setting up a "normal" network and letting the default TCP/IP local-subnet and routing behaviors do the right thing is at all possible, let the default behavior work for you. -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: any use to build from source?
Giorgos Keramidas wrote: Indeed, packages-4-stable, packages-4.10-release on ftp.freebsd.org don't include openoffice. A search at google though yields: http://projects.imp.ch/openoffice/ which does list FreeBSD packages of OO-1.0.3 and OO-1.1.0 :-) Which is not 1.1.1 or the latest 1.1.2. This is preferable from the end-user's perspective, but I think it would exponentially increase the number of precompiled binaries the mirrors would have to keep available. If a port has 3 options and depends on another with 4 options, to host every possible combination that one might want on the FTP site 12 different combinations would have to be built and packaged! With thousands of ports in the tree this means a mind-boggingly huge number of different builds and packages can be built. Is it possible to satisfy all the users with precompiled packages? No. My argument is the other way round: build a package will *all* available options. It will be bloated, but still smaller (in download size) and faster to install. If you like it, keep it, and want to tweak it afterwards, OK, go for it, the investment is worthwile That makes one single package that should suit everybody (unless options are mutually exclusive, of course, but that's not often the case AFAIK). I believe that, for most software, we are just end-users. I have a local patch to fetchmail in my local /usr/ports tree that fixes a bug recent versions have with APOP: It didn't take me more than 15 minutes to write, but then I'm working as a programmer so that's "normal". Fetchmail is, IMHO, a reasonably sized project. I'm not saying this to sound insulting to you in any way, or to boast about my ''l33t h4x0r skillz'' -- that's nonsense. I am only bringing it up as a good example where building the port *does* have obvious advantages. That is indeed a reasonable example, but I am not sure there are many of them. I also believe that the original author should, if at all possible, do this correction, because it is useful to many people. -pu ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mounting a multicard reader (FBSD)
On Sat, Jun 19, 2004 at 07:45:28AM -0500, Andrew L. Gould wrote: > On Saturday 19 June 2004 04:18 am, Jason Oakley wrote: > > Ive managed to mount the CF card in my multicard reader: > > > > /dev/da0s1 129254313349792024%/mnt/CF > > > > But not the SD card port on the same reader. > > I'm guessing it's /dev/da1s1 but I used MAKEDEV on it and I still > > can't mount it. What does 'camcontrol devlist' say? Probably it will just list one device (da0) that - as you've found - corresponds with the CF slot on your card reader. The other slots are probably mapped to other LUNs (Logical Unit Numbers) on the same SCSI device number. The CAM framework only probes LUN 0 by default, so you only see the first slot. For example, when my machine boots, I have: # camcontrol devlist at scbus2 target 0 lun 0 (pass0,da4) which happens to by the SD/MMC slot on my four-slot reader. To make the other slots visible I do: # camcontrol rescan 2:0:1 # camcontrol rescan 2:0:2 # camcontrol rescan 2:0:3 # camcontrol devlist at scbus2 target 0 lun 0 (pass0,da4) at scbus2 target 0 lun 1 (da5,pass1) at scbus2 target 0 lun 2 (da6,pass2) at scbus2 target 0 lun 3 (da7,pass3) where the '2' and '0' come from the 'scbus' and 'target' parts of the devlist output - these will probably be different for your system. So now I have da{5,6,7} corresponding to the SmartMedia, CF and Memory Stick slots on my reader. I actually have all those 'camcontrol rescan' commands in my /etc/usbd.conf file, so everything is set up automatically when the reader is detected. You might also want to look into using the automounter to avoid having to mount things manually - it's pretty convenient to be able to plug in a card then just 'cd /flash/cf' (or whatever) to access it. Dan Pelleg wrote a pretty good article about this on DaemonNews last year: http://ezine.daemonnews.org/200305/cfmount.html Hope that's some help to you, Scott -- === Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott at fishballoon.org | 0xAA775B8B | -- Anon ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Memory / Swap Space Problem
Bruce <[EMAIL PROTECTED]> writes: > I am having problems with my swap space. Maybe. I'm not sure what's > going on, to be honest. If my memory is at 100% load and I just keep > opening apps, shouldn't at some point my swap space be used? Not necessarily. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/misc.html#MORE-SWAP http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/misc.html#TOP-FREEMEM and if you want more information, any introductory operating systems textbook will spend dozens of pages explaining paging techniques. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
interrupt storm on irq 7
Hi, I keep receiving messages about interrupt storm on irq 7 and my device being throttled down on my -CURRENT machine. The result is very slow printout. Does anybody else see this, or is there a workaround for it? Regards, Uli. P.S.I am using cups - perhaps this causes the problem? +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: blocking internally
John Lee wrote: hi, i have 7 ips on one box, however they can't connect internally to each other IP ports. please advise. here's my setup: rc.conf: defaultrouter="63.223.65.1" ifconfig_sis0="inet 63.223.65.192 netmask 255.255.255.0" /etc/ips.added: ifconfig sis0 inet 63.223.65.193/32 alias ifconfig sis0 inet 63.223.71.2/32 alias ifconfig sis0 inet 63.223.71.3/32 alias ifconfig sis0 inet 63.223.71.4/32 alias ifconfig sis0 inet 63.223.71.5/32 alias route add 63.223.65.193 63.223.65.1 route add 63.223.71.2 63.223.71.1 route add 63.223.71.3 63.223.71.1 route add 63.223.71.4 63.223.71.1 route add 63.223.71.5 63.223.71.1 Why are you using this routes ? Is .71.1 some other gateway ? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: login troubles (password prompt is slow to appear)
RF <[EMAIL PROTECTED]> writes: > installed... and the password prompt still takes forever to appear. > Anyone know what's going on? I heard something about FreeBSD doing a > DNS on every connecting IP and that adding my IP (which is > unfortunately not static) to etc/hosts would bypass the lookup... but > it still takes a long time. I think you probably still aren't getting the name resolution on the connecting machines (yes, sshd does do a reverse name lookup). Try adding debug flags to the sshd and see what it thinks the problems are. There is an "sshd_flags" variable in rc.conf that you can set to do this automatically at boot time. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: blocking internally
John Lee wrote: hi, i have 7 ips on one box, however they can't connect internally to each other IP ports. please advise. here's my setup: rc.conf: defaultrouter="63.223.65.1" ifconfig_sis0="inet 63.223.65.192 netmask 255.255.255.0" /etc/ips.added: ifconfig sis0 inet 63.223.65.193/32 alias ifconfig sis0 inet 63.223.71.2/32 alias ifconfig sis0 inet 63.223.71.3/32 alias ifconfig sis0 inet 63.223.71.4/32 alias ifconfig sis0 inet 63.223.71.5/32 alias route add 63.223.65.193 63.223.65.1 route add 63.223.71.2 63.223.71.1 route add 63.223.71.3 63.223.71.1 route add 63.223.71.4 63.223.71.1 route add 63.223.71.5 63.223.71.1 You have some reason to route ifaces through 63.223.71.1 ? And where is this "gateway" ? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Memory / Swap Space Problem
Hi all, I am having problems with my swap space. Maybe. I'm not sure what's going on, to be honest. If my memory is at 100% load and I just keep opening apps, shouldn't at some point my swap space be used? Its always 0% [EMAIL PROTECTED] swapinfo Device 1K-blocks UsedAvail Capacity /dev/ad0s2b 10485760 1048576 0% Not sure.. Any help would be great. Thanks again, Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 5.2.1 - Joke-only release ? April Fools ??
Hello Joe: You may want to look here for advice on installing also. The FreeBSD Laptop Compatibility List http://gerda.univie.ac.at/freebsd-laptops/ Maybe you should just get CD 1 of FreeBSD 5.2.1 and try installing from that? Kind regards, Jonathan > So the question is, has any person, anywhere, at any > time, successfully installed 5.2.1-RELEASE on any > hardware whatsoever ? Or is it just a practical joke > release ? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NFS Port
On Mon, Jun 14, 2004 at 01:20:57PM -0400, Bruce Hunter wrote: > I am able to connect to my NFS system like so > mount 192.168.1.14:/home/NFSave /mnt/coreserver > > I want to connect from outside my network, like when I'm at school. What > port(s) does NFS run off. I have to do port forwarding on my > Router/Firewall. Look at mountd(8) for the server side of managing NFS -- use the '-p' options to specify a port to listen on for NFS mount requests. Port 2049 is the traditional port number for NFS, but portmap(8) generally only treats that as a guideline, so unless you force it, NFS can use just about any high numbered port. Make sure you firewall off port 111 very carefully on any system running portmap(8) [4.x] or rpcbind(8) [5.x] -- (same program, just renamed between system versions) exposed to the Internet. RPC is a favourite and generally very fruitful attack vector. On the client, you will need to use tcp as the transport -- not all clients will support that -- and you can specify what port to contact the server on in /etc/fstab, thus bypassing the usual portmapper procedure. See the descriptions of the '-T' and '-o port' options in mount_nfs(8). As others have mentioned, this would be a good situation in which to use an IPSEC tunnel or similar between server and client -- NFS traffic is vulnerable to snooping and exposes the contents of your harddrive. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgpBI0H4PBmPt.pgp Description: PGP signature
Re: Redirection with a bridge ?
You can do it with a cisco like this. You can pickup a used 250x series cheap. Just make sure you are using IOS 12 > ip nat pool trans 10.10.10.0 10.10.10.254 netmask 255.255.255.0 ip nat inside source list 1 interface Ethernet0 overload ip nat inside source static tcp 10.10.10.13 110 interface Ethernet0 110 ip nat inside source static tcp 10.10.10.13 80 interface Ethernet0 80 ip nat inside source static tcp 10.10.10.13 25 interface Ethernet0 25 ip classless ip route 0.0.0.0 0.0.0.0 Ethernet0 - Original Message - From: "Matt Juszczak" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 18, 2004 7:05 PM Subject: Redirection with a bridge ? > Hello all, > > Is there a way to do IP redirection without using layer 3? (IPNAT or > routing)? I have a bridge setup and want to redirect any port 80 > traffic outgoing through the bridge to a specific server but it > seems I can only do this with ipfw's forward/fwd or ipnat's rdr commands > ... which are all layer 3 oriented and dont work with just a bridge... > > Any ideas? > > Thank you in advance for anyone's help, > > Matt > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: FreeBSD Wiki
What you are talking about is commonly refereed to as "how-to" Do an google search on FreeBSD + how-to for list of sites which accept your type of how-to write ups. You can post your how-to to all the sites that will accept them. There is noting like that in the official FreeBSD.org environment. All FreeBSD has is the official handbook and if you feel your write out is better than what is in the handbook, or if handbook does not cover your how-to, then tar your how-to and submit it to the FreeBSD doc group using the pr-send command. There are instruction to follow on Freebsd.org site under doc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Graham Bentley Sent: Saturday, June 19, 2004 8:47 AM To: [EMAIL PROTECTED] Subject: FreeBSD Wiki Hi All, I was just wondering something :- I have used in the past Trustix Linux which has a nice Wiki page http://doc.trustix.org/cgi-bin/trustixdoc.cgi?TrustixWiki It includes some nice step by step configs for that distro and I think its great that peeps can add there own info and collaborate in this way. I wrote the small part on Samba. (Ok its basic stuff but usefull if you are starting out) Whilst the mailing lists are great, searchable etc things do get lost in time. Wouldnt it be great if there was a user cookbook for commonly required tasks (how many times has this list had the same questions asked :) Examples:- 1) Installing PostNuke on 5.2.1 2) Serving anonymous FTP 3) Creating a LAN Mail Hub Is there any such resource for FreeBSD ? (I am guessing that there is more official documentation but that this is less task / step orientated ?) If not - fancy starting one ?? :)) I have only got ADSL and an old box but would be willing to host it. All you have to do is help me get the software up and running :)) g:o) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: any use to build from source?
Patrick Useldinger writes: > True for the CDs. But once you want to upgrade, things get more > complicated. For example, I did not find a package for OpenOffice > 1.1.1 in the "offical" places, although OO is certainly an > excellent candidate for a package. If you have not found in unofficial places, try here: http://projects.imp.ch/openoffice/ > This led me to the conclusion that packages, in the FBSD world, > are considered less important than the very well maintained > ports. I do not know if it is official policy, but it is de facto true for one reason. It is much easier to go from the port to the package than vice versa. > I agree with that argument, you can tailor the compilation. But > it's probably not systematical, but rather the exception. You might be surprised. With the ability to tailor things by variables fed to make (which can be made the default by inclusion in pkg_tools.conf), quite a few people (raises hand) are doing at least some of this. > I do not agree with an earlier argument, which was that you could > change the source. I have been programming for 25 years now, I am > certain that you don't change code, not even in a reasonably > sized project, without spending a large amount of time. But if the programmer and/or port maintainer do all the work for you? Robert Huff ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Application commands without having to restart
Enter rehash command -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bruce Hunter Sent: Sunday, June 13, 2004 1:42 AM To: [EMAIL PROTECTED] Subject: Application commands without having to restart Hello everyone, I just installed a port. Usually, a application has a define command to start it and can be run from anywhere on the command line. When you first install an application. The command isn't available to the system until after a reboot. How do I make the system aware? Refresh the commands list? Any reading material on this? Thanks for your help Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Application commands without having to restart
On 2004-06-13 01:41, Bruce Hunter <[EMAIL PROTECTED]> wrote: > Hello everyone, > > I just installed a port. Usually, a application has a define command to > start it and can be run from anywhere on the command line. When you > first install an application. The command isn't available to the system > until after a reboot. Nah, not really. You can always run it with its full pathname: tcsh> sh /usr/local/etc/rc.d/foo.sh start > How do I make the system aware? Refresh the commands list? > Any reading material on this? Are you using tcsh as your login shell? If yes, just run: tcsh> rehash This should 'refresh' tcsh's idea of what commands are available. I don't remember about zsh, but I think it has a 'rehash' command too. GNU bash should take care of this automagically. - Giorgos ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Redirection with a bridge ?
Renato Marques wrote: Hmmm.. I really can't think about some solution... All of them involve a router before, in or after the bridge. How about proxying before the bridge? I think that my be an option. I'll have to think on it, I appreciate your help though. Thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Application commands without having to restart
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Bruce Hunter wrote: | Hello everyone, | | I just installed a port. Usually, a application has a define command to | start it and can be run from anywhere on the command line. When you | first install an application. The command isn't available to the system | until after a reboot. | | How do I make the system aware? Refresh the commands list? | Any reading material on this? | | Thanks for your help | Bruce The only time you need to reboot an *nix machine is to modify the hardware or to change the currently running kernel. In csh, type rehash to refresh the list of applications found in your PATH. - -- Jeremy Faulkner http://www.gldis.ca -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFA1EzKfb0Lle2MIEIRAoOEAJ9WQl8854zEQyd9fcBfsHaeQQmHQwCeMy6C C9AV5BLb/fGlaziujuy7sv8= =Ot1z -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Application commands without having to restart
Bruce Hunter wrote: Hello everyone, I just installed a port. Usually, a application has a define command to start it and can be run from anywhere on the command line. When you first install an application. The command isn't available to the system until after a reboot. How do I make the system aware? Refresh the commands list? Any reading material on this? If you have the standard shell (csh) then a simple % rehash would do. Thanks for your help Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: memory
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Paul Diaguila wrote: | Greetings | | I've added a gig of memory to a 5.1 system. When booting, it shows 1024 | meg. Looking in the dmesg log, it says: | real memory = 268414976 (255 MB) | avail memory = 251363328 (239 MB) | | I would expect to see real memeory at 1024 also What don't I | understand | | thanks... | | Paul If you are reading the dmesg via dmesg|more, page down. A lot. It is not uncommon to have multiple boot records in dmesg's output. What does sysctl hw.physmem return? - -- Jeremy Faulkner http://www.gldis.ca -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFA1Euefb0Lle2MIEIRAljJAKC9OKgROJPtlnYw21ymFtwZv58TygCfZtVR KLNwXaSHMFAFNm6hEtUP93k= =ijjA -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NFS Port
NFS will not work travessing a firewall doing NAT or RDR. NFS uses the RPC protocol that controls what ports NFS are going to use, so the Fiewall know nothing about this and block the traffic. You could be setting a VPN... > Hi all, > > I am able to connect to my NFS system like so > mount 192.168.1.14:/home/NFSave /mnt/coreserver > > I want to connect from outside my network, like when I'm at school. What > port(s) does NFS run off. I have to do port forwarding on my > Router/Firewall. > > Thanks so much > Bruce > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Application commands without having to restart
> How do I make the system aware? Refresh the commands list? > Any reading material on this? # rehash Cheers, sb > > Thanks for your help > Bruce > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: any use to build from source?
On 2004-06-19 10:58, Patrick Useldinger <[EMAIL PROTECTED]> wrote: > Giorgos Keramidas wrote: > > > Before I answer to this question, I cannot help noting that you don't > > *HAVE* to compile everything from source. In fact, if you install a > > RELEASE version of FreeBSD and use pkg_add to install the binary, > > precompiled packages of just the applications you are going to > > use... there is absolutely no need to rebuild anything from source. > > True for the CDs. But once you want to upgrade, things get more > complicated. For example, I did not find a package for OpenOffice 1.1.1 > in the "offical" places, although OO is certainly an excellent candidate > for a package. Indeed, packages-4-stable, packages-4.10-release on ftp.freebsd.org don't include openoffice. A search at google though yields: http://projects.imp.ch/openoffice/ which does list FreeBSD packages of OO-1.0.3 and OO-1.1.0 :-) > This led me to the conclusion that packages, in the FBSD world, are > considered less important than the very well maintained ports. The ports people are going through a lot of effort to build, test and package the maximum possible number of ports before each release. > I would prefer it to be the other way round: go for packages, unless you > want to tweak anything. This is preferable from the end-user's perspective, but I think it would exponentially increase the number of precompiled binaries the mirrors would have to keep available. If a port has 3 options and depends on another with 4 options, to host every possible combination that one might want on the FTP site 12 different combinations would have to be built and packaged! With thousands of ports in the tree this means a mind-boggingly huge number of different builds and packages can be built. Is it possible to satisfy all the users with precompiled packages? No. So, going for ports and using packages only is a bit difficult :-/ > I do not agree with an earlier argument, which was that you could change > the source. I have been programming for 25 years now, I am certain that > you don't change code, not even in a reasonably sized project, without > spending a large amount of time. I have a local patch to fetchmail in my local /usr/ports tree that fixes a bug recent versions have with APOP: : [EMAIL PROTECTED]:05]/usr/ports/mail/fetchmail# cvs -q up -APd : ? files/patch-zz::apop_bug : [EMAIL PROTECTED]:05]/usr/ports/mail/fetchmail# : : [EMAIL PROTECTED]:06]/usr/ports/mail/fetchmail# cat files/patch-zz\:\:apop_bug : --- driver.c.orig Sun Mar 28 13:29:15 2004 : +++ driver.c Sun Mar 28 13:49:42 2004 : @@ -429,7 +429,7 @@ : /* for POP3, we can get the size of one mail only! Unfortunately, this :* protocol specific test cannot be done elsewhere as the protocol :* could be "auto". */ : - if (ctl->server.protocol == P_POP3) : + if (ctl->server.protocol == P_POP3 || ctl->server.protocol == P_APOP || ctl->server.protocol == P_RPOP) : fetchsizelimit = 1; : : /* Time to allocate memory to store the sizes */ This is a serious showstopper for anyone who uses fetchmail and doesn't want to fetch all the messages in one connection (for whatever reasons). It didn't take me more than 15 minutes to write, but then I'm working as a programmer so that's "normal". Fetchmail is, IMHO, a reasonably sized project. I'm not saying this to sound insulting to you in any way, or to boast about my ''l33t h4x0r skillz'' -- that's nonsense. I am only bringing it up as a good example where building the port *does* have obvious advantages. - Giorgos ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: removal of question
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Rammal - wrote: | Hello! | Please remove my this question from FreeBSD mailing list http://lists.freebsd.org/pipermail/freebsd-questions/2004-February/034758.html | Thanks. | -Rammal That is not possible. - -- Jeremy Faulkner http://www.gldis.ca -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFA1EpHfb0Lle2MIEIRAi7JAJ9zGv/Hhde4o97HEQRH8R3SLKzQNACfUdDf U6quSU37TLCp2gq6zdLrlws= =UfW8 -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Application commands without having to restart
Hello everyone, I just installed a port. Usually, a application has a define command to start it and can be run from anywhere on the command line. When you first install an application. The command isn't available to the system until after a reboot. How do I make the system aware? Refresh the commands list? Any reading material on this? Thanks for your help Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
NFS Port
Hi all, I am able to connect to my NFS system like so mount 192.168.1.14:/home/NFSave /mnt/coreserver I want to connect from outside my network, like when I'm at school. What port(s) does NFS run off. I have to do port forwarding on my Router/Firewall. Thanks so much Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
This is a test
This is a test! Bruce ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Bittorrent not in ports?
On Fri, Jun 18, 2004 at 06:38:23PM -0700, Julian M. Mason wrote: > ...is bittorrent really not in ports? > > my usual > # cd /usr/ports ; make search name="bittorrent" > and > # whereis bittorrent > > turned up nothing; nor did a wandering around /usr/ports/net. > > Do I have to actually go and get something myself? As others have mentioned the location of the bittorrent port I'll skip that bit - just a note though to say check out the portsearch perl script which is useful for finding ports: /usr/ports/Tools/scripts/portsearch -i bittorrent turns up plenty to go on. -- Jez Hancock - System Administrator / PHP Developer http://munk.nu/ http://jez.hancock-family.com/ - Another FreeBSD Diary http://ipfwstats.sf.net/- ipfw peruser traffic logging ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: USB drive questions
On Sat, Jun 19, 2004 at 09:13:22AM -0400, stan wrote: > I had a vendor give me a USB memory stick as a promotional giveaway > yesterday. Kind of amazing theat they have gotten cheap enough for this. > > In any case, I pluged it into my laptop with STABLE on it (cvsuped last > weekend). It recognized the device, and told me it was a generic USB > storage deviec. > > How can I mount this device? > You should read the beginning of this article: http://bsdnews.org/03/cryptusb.php > Also, when I unplug it I get a panic. I do have, what I think are, the > correct defines in my kernel config. > [...] Well the "panic" is not normal, maybe you could give us more details. Marc ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Any 4.10 installation on asus pundit ?
Bernard Dugas wrote: Thanks very much, Robert, it was the udma option : but this is quite inefficient if I can't use UDMA with FreeBSD ? FreeBSD will drop down to PIO mode, probably mode 4. According to Scott Mueller's book, PIO mode 4 offers up to 16.67 MB/sec, whereas UDMA can offer up to 100 or 133 MB/sec. So, yes, less efficient (but also a bit quieter in my experience). Have you been able to switch the data cable for a know good cable? That solved the problem for me. -- Bob ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
memory
Greetings I've added a gig of memory to a 5.1 system. When booting, it shows 1024 meg. Looking in the dmesg log, it says: real memory = 268414976 (255 MB) avail memory = 251363328 (239 MB) I would expect to see real memeory at 1024 also What don't I understand thanks... Paul ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
USB drive questions
I had a vendor give me a USB memory stick as a promotional giveaway yesterday. Kind of amazing theat they have gotten cheap enough for this. In any case, I pluged it into my laptop with STABLE on it (cvsuped last weekend). It recognized the device, and told me it was a generic USB storage deviec. How can I mount this device? Also, when I unplug it I get a panic. I do have, what I think are, the correct defines in my kernel config. What might I be doing wrong? -- "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." -- Benjamin Franklin ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
blocking internally
hi, i have 7 ips on one box, however they can't connect internally to each other IP ports. please advise. here's my setup: rc.conf: defaultrouter="63.223.65.1" ifconfig_sis0="inet 63.223.65.192 netmask 255.255.255.0" /etc/ips.added: ifconfig sis0 inet 63.223.65.193/32 alias ifconfig sis0 inet 63.223.71.2/32 alias ifconfig sis0 inet 63.223.71.3/32 alias ifconfig sis0 inet 63.223.71.4/32 alias ifconfig sis0 inet 63.223.71.5/32 alias route add 63.223.65.193 63.223.65.1 route add 63.223.71.2 63.223.71.1 route add 63.223.71.3 63.223.71.1 route add 63.223.71.4 63.223.71.1 route add 63.223.71.5 63.223.71.1 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ram disk
On Sat, 19 Jun 2004 07:56:04 -0400, Paul Diaguila <[EMAIL PROTECTED]> wrote: > #mount -t -o -s1048576,noasync /dev/sd0s1b /var/spool/file > mount: exec mount_mfs not found in /sbin, /usr/sbin: No such file or > directory Instead of mount, you ought to use the mount_mfs command. It should also be located in /sbin/ along with mount. -- Andy Harrison ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD Wiki
Hi All, I was just wondering something :- I have used in the past Trustix Linux which has a nice Wiki page http://doc.trustix.org/cgi-bin/trustixdoc.cgi?TrustixWiki It includes some nice step by step configs for that distro and I think its great that peeps can add there own info and collaborate in this way. I wrote the small part on Samba. (Ok its basic stuff but usefull if you are starting out) Whilst the mailing lists are great, searchable etc things do get lost in time. Wouldnt it be great if there was a user cookbook for commonly required tasks (how many times has this list had the same questions asked :) Examples:- 1) Installing PostNuke on 5.2.1 2) Serving anonymous FTP 3) Creating a LAN Mail Hub Is there any such resource for FreeBSD ? (I am guessing that there is more official documentation but that this is less task / step orientated ?) If not - fancy starting one ?? :)) I have only got ADSL and an old box but would be willing to host it. All you have to do is help me get the software up and running :)) g:o) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mounting a multicard reader (FBSD)
On Saturday 19 June 2004 04:18 am, Jason Oakley wrote: > Ive managed to mount the CF card in my multicard reader: > > /dev/da0s1 129254313349792024%/mnt/CF > > But not the SD card port on the same reader. > I'm guessing it's /dev/da1s1 but I used MAKEDEV on it and I still > can't mount it. > > $ sudo mount -t msdos /dev/da1s1 /mnt/SD > msdos: /dev/da1s1: Device not configured > > $ ls -d /dev/da1* > /dev/da1/dev/da1e /dev/da1s1a /dev/da1s1f > /dev/da1s4 /dev/da1a /dev/da1f /dev/da1s1b > /dev/da1s1g > /dev/da1b /dev/da1g /dev/da1s1c /dev/da1s1h > /dev/da1c /dev/da1h /dev/da1s1d /dev/da1s2 > /dev/da1d /dev/da1s1 /dev/da1s1e /dev/da1s3 > Does your multicard reader accept more than one card at a time? If not, have you tried mounting the SD card using the same device as the CF card? When the SD is inserted, what device message do you see? What appears at the end of dmesg? Best of luck, Andrew Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
CMS Software
Hi, I was wondering if anyone can comment on the following :- I am looking to install some CMS software and to run my web site long term on FreeBSD. I am thinking something on the lines of phpWebsite, PostNuke/PhpNuke or similar (ie easy for me to install and maintain / update - don't need buckets of features just basic simple / effective / reliable) I'll need Apache, MySQL, PHP I read somewhere once that after the initial install and update of FreeBSD all that was required was a simple make in the postnuke ports directory and this action woudl go away and fetch everything that was required, install it and write out basic / sensible conf files then run the appropriate services. If this is true, and it works then I am even more impressed with FreeBSd than I first thought. So, if you are using any kind of CMS for your website and have done the above can you make recommendations ? Thanks 3BSDee'ers ! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 5.2.1 - Joke-only release ? April Fools ??
On Jun 19, 2004, at 3:26 AM, Michael W. Oliver wrote: On 2004-06-18T23:17:14-0700, Joe Schmoe wrote: So the question is, has any person, anywhere, at any time, successfully installed 5.2.1-RELEASE on any hardware whatsoever ? Or is it just a practical joke release ? That's a tad caustic, don't you think? I bet it's the devil logo that's screwing him up. We should change it. :-) FWIW, I have managed to get 5.2.1 to install on a LAM test system (ironic?) at work, once I set the CDROM to master on it's own channel (I had to remove the jumpter to install 4.9 because it crashed at boot until I did; 5.2.1 crashed at boot until I set it to the opposite way). I had burned the 2 meg install floppy to a small CD to install it after checking the MD5 sums. It sounds like your install images or floppies were bad. I'd doublecheck the MD5's and if they check out, re-image some floppies (or try putting it on a CD...they tend to be more resilient). -Bart ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: help!
ORACLE . wrote: > when i start the gnome i get this error > > Could not look up internet address > This will prevent Gnome from operating correctly. It > may be possible to correct the problem by adding > the file /etc/host. > Log on anyway? Cancell? > > i am getting this error when i start the gnome please > tell me what to do i am new to freebsd.. Here is a detailed solution to your problem: http://www.freebsd.org/gnome/docs/faq2.html#q20 Simon signature.asc Description: Digital signature
Re: Any 4.10 installation on asus pundit ?
Bernard Dugas wrote: Hi, Robert Downes a écrit : [EMAIL PROTECTED] wrote: I've tried to install the last freebds4.10 on an ASUS PUNDIT, from the iso images downloaded from the freeBSD website. But it can't install. It stops on a : "ata0 : resetting devices" I had that problem. I disabled UDMA (Ultra DMA) in the BIOS, and the problem was overcome. However, it ultimately turned out to be a bad data cable to the hard drive, so see if you've got a good spare lying around to give that a try. (I got some serious errors in 5.2.1 trying to use the bad cable). Thanks very much, Robert, it was the udma option : but this is quite inefficient if I can't use UDMA with FreeBSD ? Best regards, I didn't see the beginning of the thread. But I had a similar problem on my desktop machine using (I think) 4.9-Release. It started when I had to change the motherboard. The new one came w/ an SiS chipset that wasn't supported by FreeBSD. I solved the problem by adding a line to /sys/dev/ata/ata-dma.c. It worked for a few weeks w/o any problems until I switched to RELENG_5_2 for various other reasons. You might want to post what chipset your mainboard uses. Phil. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ram disk
Greetings Trying to create a ram disk with this command and seeing the error below. #mount -t -o -s1048576,noasync /dev/sd0s1b /var/spool/file mount: exec mount_mfs not found in /sbin, /usr/sbin: No such file or directory I'm googling and looking through archives, but nothing so far. Any help would be greatly appreciated. Paul ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
removal of question
Hello! Please remove my this question from FreeBSD mailing list http://lists.freebsd.org/pipermail/freebsd-questions/2004-February/034758.html Thanks. -Rammal - Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: help!
hey, had the same problem, add the following line to /etc/rc.conf; hostname="localhost" hope this helps. Brett ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Mounting a multicard reader (FBSD)
Ive managed to mount the CF card in my multicard reader: /dev/da0s1 129254313349792024%/mnt/CF But not the SD card port on the same reader. I'm guessing it's /dev/da1s1 but I used MAKEDEV on it and I still can't mount it. $ sudo mount -t msdos /dev/da1s1 /mnt/SD msdos: /dev/da1s1: Device not configured $ ls -d /dev/da1* /dev/da1/dev/da1e /dev/da1s1a /dev/da1s1f /dev/da1s4 /dev/da1a /dev/da1f /dev/da1s1b /dev/da1s1g /dev/da1b /dev/da1g /dev/da1s1c /dev/da1s1h /dev/da1c /dev/da1h /dev/da1s1d /dev/da1s2 /dev/da1d /dev/da1s1 /dev/da1s1e /dev/da1s3 - http://www.bangrocks.com/ - http://www.auspug.org/ http://www.ZigZagSoft.com/ - PalmOS Software and "Palm Games Programming" forum ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: how to extract 512 bytes from a file
On Fri, Jun 18, 2004 at 11:36:04PM -0400, Thomas Farrell probably wrote: > I was thinking I could take a working avi and extract the first 512 > bytes and insert it into the beginning of a bogus file. Does anyone > think this may work? Given the number of compression formats actually hiding under the '.avi' extension, and that the most sensitive information is usually in the header, I doubt that. Unless you know for sure what should be there, this won't work. > Any idea how I can accomplish this? dd(1). Especially `seek=...', `skip=...' and `conv=notrunc'. > Do I smoke too much weed? Only if you think you're going to guess 512 bytes of the header from scratch:) -- DoubleF Any excuse will serve a tyrant. -- Aesop pgpMP2l3ha3uy.pgp Description: PGP signature