Dánielisz László escribió:
Anyone know of a good flowchart drawing tool for BSD?
Something like Visio?
Hello, you can try de following:
kivio (I think it's under koffice)
bouml
umbrello
dia
xfig
Laci
[SNIP]
Regards,
DMW
___
/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
Regards,
--
.O. | Daniel Molina Wegener | C/C++ Developer
..O | dmw [at] unete [dot] cl | FOSS Coding Adict
OOO | FreeBSD Linux User| Standards Rocks!
___
freebsd
systems, there are a number of approaches. Search
Google for things like minibsd, picobsd, nanobsd. There are plenty of
pages out there.
Good luck!
Dan
--
Daniel Bye
_
ASCII ribbon
to ensure nothing else is running while you run the build. In my
experience, this has not been necessary. Even still, after the installkernel
you MUST reboot the newly installed kernel before you continue.
HTH
Dan
--
Daniel Bye
this step necessary, but
there is certainly no harm in it, and it may be the sensible thing to
do if your system has a lot of users logged in during normal operations.
Note that you must still reboot after installing the new kernel, and
before continuing to installworld.)
Dan
--
Daniel Bye
@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
--
Daniel de Oliveira
Network and System Analyst
Security Specialist
IBM RISC Specialist
IBM Storage Specialist
Linux/Unix Specialist
Linux User #: 405334
Joey Mingrone escribió:
Hello,
I've been told that LaTeX is probably the best solution for creating
scientific papers with math fonts, so I'm trying to get a working
installation.
My first attempt was to install the latex2e-2003.12_1 port, which
installed the tex-3.14159_3 port as a
Polytropon escribió:
On Wed, 30 Jul 2008 18:05:59 +0100, Glyn Millington [EMAIL PROTECTED] wrote:
Joey Mingrone [EMAIL PROTECTED] writes:
fonts, but it seems they are in the teTex port, but that port
conflicts with the tex port and it seems teTex is no longer being
updated.
DSA - JCR escribió:
Hi all
Hi
FreeBSD 6.2
I have used in the past year an utility for terminal that permit me to
split the terminal in several sesions vertically/horizontally and also
save and restore the sesion, letting it doing some commands.
I installed from ports, but I dont remember
the upgrade? Because he wants to run 7?
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
relies on it. I am kind of stuck here. Does samba 3.0.30 not
work with openldap 2.4? Do I have to have openldap 2.3?
Put this in /etc/make.conf
WANT_OPENLDAP_VER=24
It tells the ports tree that you want OpenLDAP 2.4 if a port doesn't
specify a particular version.
--
Daniel O'Connor software
locate database.
--
Best regards,
Daniel Gerzo
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
), crontab(1,5), periodic(8) and periodic.conf(5))
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
firewall rules
* The ability to have a jail with /no/ external IP for when the
paranoia becomes unbearable[*].
Most of this is actually implemented by [EMAIL PROTECTED] You can find some
patches
at http://sources.zabbadoz.net/freebsd/jail.html
--
Best regards,
Daniel Gerzo
Xorg)
then
echo X is up.
exit 0
else
echo No X yet...
exit 1
fi
... should do the trick.
And bear in mind that ~/.zlogin is run *after* ~/.zshrc, whereas ~/.zprofile
is run *before* it. It might matter, depending on what you are trying to do.
Dan
--
Daniel Bye
would think by now that most ports
will work on it, particularly the type of things you mention above.
Dan
--
Daniel Bye
_
ASCII ribbon campaign
to be compiled against the source for the running
kernel. Not recompiling it in the event you carry out a buildworld/
buildkernel cycle, etc, will likely lead to strange failures of the
driver.
Dan
--
Daniel Bye
these are just clues and not real answers.
--
Sten Daniel Soersdal
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
yet.
/Daniel Eriksson
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello Stanislav,
Sunday, June 15, 2008, 12:40:57 PM, you wrote:
Dear Daniel,
Please tell me you had this storms only with 3ware 8006-2LP?
Actually, I do have them on the boxes which do not have the raid
controller. I have several boxes in hetzner. The ones that does not
have any additional
Information
Manufacturer: MICRO-STAR INTERANTIONAL CO.,LTD
Product Name: MS-7368
Version: 1.0
I was unable so far to fix this problem...seems like some hardware
issue
--
Best regards,
Danielmailto:[EMAIL PROTECTED
they do not officialy support FreeBSD, unluckily :-(
These interrupt storms are the only problem I have with hetzner.de...
--
Best regards,
Danielmailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http
affect a typical web
server. It does not seem to affect any of my fileservers (exporting NFS).
/Daniel Eriksson
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hello Wojciech,
Tuesday, June 3, 2008, 8:27:56 PM, you wrote:
does patch exist for it?
http://sources.zabbadoz.net/freebsd/jail.html
--
Best regards,
Danielmailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org
://www.freebsd.org/doc/en_US.ISO8859-1/articles/remote-install/
--
Best regards,
Danielmailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
you something to think about.
Regards,
--
Frank
Contact info: http://www.shute.org.uk/misc/contact.html
--
Sten Daniel Soersdal
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On Wed, May 21, 2008 at 6:11 PM, Wojciech Puchar
[EMAIL PROTECTED] wrote:
I guess it can, but in the past when hardware has failed for me, I
generally got some indicative errors in the logs.
hardware failures are different. rarely causes reboot, or reboots ramdomly
independent of what you
using wchar types and functions, also iconv can be
usefull.
Thanks,
Robert Huff
[SNIP]
Regards,
--
.O. | Daniel Molina Wegener | C/C++ Developer
..O | dmw [at] unete [dot] cl | FOSS Coding Adict
OOO | FreeBSD Linux User| Standards Rocks
vfs.zfs.prefetch_disable=1
5. edit /etc/rc.conf and add zfs_enable=YES
6. reboot
7. be happy!
(With 16 GB memory you can probably use larger values for slightly
better performance in step #4 above.)
/Daniel Eriksson
___
freebsd-questions@freebsd.org
with things like
this - run portsclean -CDD every so often to keep your workdirs clean,
and to remove distfiles for ports that aren't installed.
Dan
--
Daniel Bye
_
ASCII ribbon campaign
to get it to
work... gnome-terminal works fine though.
Cheers,
Daniel
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
, and by the likes of portinstall,
portmaster etc.
Dan
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
like this:
rc_flags=-c /path/in/ntpd_config -c /etc/ntp.conf
So, remove it from your ntpd_flags definition and all should be well!
Dan
--
Daniel Bye
_
ASCII ribbon campaign
Project's IPSEC to FAST_IPSEC.
Dan
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
Hi!
Thank you for your answer. So, I need to recompile the kernel. Fine!
At first I thought there might be a switch somewhere, to do the
conversion The soft way, but OK, I'll rebuild the kernel.
Daniel
I would like to switch scheduler on my FreeBSD 7.0 box but I
what I am experiencing now:
- Bad responsiveness of the desktop
- Temporary freeze (10 to 30s)
- Slow mouse (and not a very smooth movement, a kind of 'step by step')
etc.
Daniel
I would like to switch scheduler on my FreeBSD 7.0 box but I don't
know how todo
the same kind of issues than the
ones I have. Their conclusion: The scheduler.
I wanted to switch scheduler to see if they were right or wrong... ;)
Daniel
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Hi!
I would like to switch scheduler on my FreeBSD 7.0 box but I don't know how to
do that. The scheduler by default has terrible performances under KDE/Gnome
and I would like to test the new one.
Daniel
___
freebsd-questions@freebsd.org mailing list
sector and the results are the same).
In FreeBSD 7.0-RELEASE, is there any way to find out a absolute
read/write sector location for the beginning of filesystem within a
disklabel partition?
--
Sten Daniel Soersdal
___
freebsd-questions@freebsd.org
On Tue, Apr 01, 2008 at 08:38:47PM -0400, Eduardo Cerejo wrote:
While trying to fix cyclic dependencies with pkgdb I deleted the INDEX
files out of my /usr/ports directory. How can I fix it now? cvsuping
won't do it.
cd /usr/ports make fetchindex
--
Daniel Bye
kernel and stuff? I thought about getting a new drive too
to do a fresh install, but my bay is full and kinda on a budget, thank
you!!
It should work fine.
--
Best regards,
Danielmailto:[EMAIL PROTECTED]
___
freebsd-questions
I would like an explanation on each field it command netstat - rn,
example:
Flags,Refs,Use,Expire
In Flags: UGS, UC, UHLW, UH
Somebody can explain me ?
Thanks,
Daniel
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
to SCHED_ULE resulted
in a marked improvement.
Dan
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
libs from somewhere other than the driver port.
Try uninstalling and reinstalling it.
Dan
--
Daniel Bye
_
ASCII ribbon campaign
of
disks after a system crash or power failure. Like journalling, they
don't guarantee data won't be lost, but instead that the disks will be
in a consistent state at recovery.
There are many many papers on the subject on the web, if you're
interested.
Dan
--
Daniel Bye
this around?
Thanks.
--
Best regards,
Daniel mailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
in my testing environemnt I've tryied binary upgrade from 6.3-RELEASE -
7-RELEASE by following Colin Percival's article at
http://www.daemonology.net/blog/2007-11-11-freebsd-major-version-upgrade.html
I am stuck at the step portupgrade -f ruby:
--- Reinstalling 'ruby-1.8.6.111_1,1'
yourself using it in
preference to precompiled packages. The handbook is the best place
to start, as ever.
Dan
--
Daniel Bye
_
ASCII ribbon campaign
On Wed, Mar 12, 2008 at 10:09:12AM +, Mike Clarke wrote:
On Wednesday 12 March 2008, Daniel Bye wrote:
I think it fair to say that most people will use ports to compile and
install software, rather than relying on the packages on the release
ISOs, for the simple reason that the ports
Hello Philip,
Monday, March 10, 2008, 8:46:46 AM, you wrote:
$ atacontrol mode ad2 PIO4
current mode = PIO4
My problem is how do I get this to persist across reboot ?
putting it into /etc/rc.conf.local should work...
--
Best regards,
Danielmailto:[EMAIL
pxeboot as
it has greatly simplified maintainance.
Any suggestions, pointers much appreciated.
Daniel Feenberg
NBER
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
On Wed, 5 Mar 2008, Bill Moran wrote:
In response to Daniel Feenberg [EMAIL PROTECTED]:
We have several network services hosted on a FreeBSD system, and want it
to come up quickly, so that these services (dhcp, nameservice, nis, tftp
etc) are available when systems are restarting after
On Wed, 5 Mar 2008, Kevin Kinsey wrote:
Bill Moran wrote:
So, is there advice anywhere about speeding up the boot process? It
appears that most of the 1 minute 45 seconds to boot our system is wait
time for checking the existence of non-existant hardware and would not
be
appreciable
Any ideas on how to get it to boot properly?
Thanks,
Daniel
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
to
work some cable magic to connect it.
Daniel
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello B.,
Thursday, February 28, 2008, 9:27:03 PM, you wrote:
Hello all,
make delete-old (took a long time to do by hand)
and make delete-old-libs (went rather quickly)
if you really want to delete all things:
# yes | make delete-old
--
Best regards,
Daniel
On Sat, 1 Mar 2008 06:31:39 +0530
Girish Venkatachalam [EMAIL PROTECTED] wrote:
On 01:10:06 Mar 01, Daniel Iliev wrote:
Hi, people
I installed FreeBSD using the 7.0-RELEASE-i386-bootonly.iso CD
image. After I installed Gnome (pkg_add -r gnome2), I was able to
start
on the list when it
comes to correct e-mail formatting?
*/
--
Best regards,
Daniel
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Sat, 1 Mar 2008 06:31:39 +0530
Girish Venkatachalam [EMAIL PROTECTED] wrote:
On 01:10:06 Mar 01, Daniel Iliev wrote:
== snip ==
I started gdmsetup on the FreeBSD system and enabled Remote
Login (XDMCP). It was followed by a gdm-restart. No error
messages, everything seems fine, but I
/ipfw rcvar
# ipfw
firewall_enable=NO
[EMAIL PROTECTED] ~]# /etc/rc.d/ipfilter rcvar
# ipfilter
ipfilter_enable=NO
[EMAIL PROTECTED] ~]# /etc/rc.d/pf rcvar
# pf
pf_enable=NO
[EMAIL PROTECTED] ~]#
--
Best regards,
Daniel
___
freebsd-questions@freebsd.org
Hello,
Recently I was told that 2wire dsl gateways http://www.2wire.com use a
variant of rt FreeBSD.
If this is true are they required to make the source code available to the
public? And if so how does one go about getting the GPL source
Thankfully
Daniel
=portupgrade UPGRADE_PORT=libgnome-2.18.0_2
UPGRADE_PORT_VER=2.18.0_2 make FETCH_BEFORE_ARGS=-q
-8--8--8--8--8-
Best regards,
--
.O. | Daniel Molina Wegener | C/C++ Developer
..O | dmw [at] unete [dot] cl | FOSS Coding Adict
OOO | FreeBSD Linux User
, don't edit
d: 25165824 262144004.2BSD 2048 16384 28528
e: 20960408 513802244.2BSD 2048 16384 28528
Any ideas will be much appreciated.
--
Best regards,
Daniel mailto:[EMAIL PROTECTED]
___
freebsd-questions
to make a mirror on used slice or some partition of that
and what's wrong with that, actually?
how do I create gmirror-ed slice then?
I have also tried the above commands on system that has ad4s1 and its
partitions unmounted, still getting the same error.
--
Best regards,
Daniel
create gmirror-ed slice then?
I have also tried the above commands on system that has ad4s1 and its
partitions unmounted, still getting the same error.
swap off?
no swap being used.
--
Best regards,
Danielmailto:[EMAIL PROTECTED
running on the tty, and kill it.
Dan
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
the only way. Any new shells they start up after
your changes should pick up the new values, but I don't think it's possible
to force changes out to existing sessions.
Dan
--
Daniel Bye
fsck of large filesystems.
Personally I'm going with ZFS for my next large array (8x750GB).
/Daniel Eriksson
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Detected: 2 CPUs
SMP: AP CPU #1 Launched!
Interfaces if_em:
vendor = 'Intel Corporation'
device = '82546EB Dual Port Gigabit Ethernet Controller'
Thanks.
Daniel
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
-byte strings PHP extensions (mbstring)
are needed by application.
How do I add that ? Any help greatly appreciated.
# cd /usr/ports/lang/php4-extensions
# make install
Add mutlibyte (MBSTRING) support in the config dialog, and let the
install continue.
Dan
--
Daniel Bye
PROTECTED]:2:0: class=0x028000 card=0x00551737 chip=0x03011814 rev= 0x00
hdr=0x00
vendor = 'Ralink Technology, Corp'
class= network
I have searched through various forums and even other mail threads but I
have found nothing of value.
If more information is needed let me know.
Daniel
, which follows the
Open Desktop standards - so should work just fine with KDE/Gnome/XFCE
etc. I'm using it to check my IMAP mailboxes. It supports SSL/TLS, and
several different mailbox formats.
Dan
--
Daniel Bye
You need these lines in /boot/loader.conf:
nvidia_load=YES
linux_load=YES
(The Linux mod is if you built the driver with support for Linux
DRI)
Dan
--
Daniel Bye
_
ASCII ribbon
the following:
# cd /usr/ports/x11-drivers/xorg-drivers
# make config
Are the relevant items for mouse, keyboard and the nv driver checked?
If not, check them and try reinstalling the drivers package.
HTH
Dan
--
Daniel Bye
- pkg_info(1)'s -r and -R
options will help you to build up an overview of what you need to
remove/update, if mergebase doesn't work. It's a good idea to save a list
of currently-installed ports to refer to in the event this all goes *pop*.
Good luck!
Dan
--
Daniel Bye
should probably update your ports tree. Firefox is now
at 2.0.0.11,1, and xorg-libraries is at 7.3_1.
Then try the upgrade again. If it still fails, show us the errors from
the xorg-libraries build.
Dan
--
Daniel Bye
, but it will get the job done.
I hope it works out!
Dan
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
Jason C. Wells wrote:
Sten Daniel Soersdal wrote:
I'm having troubles updating my buildworld and i've had troubles
narrowing it down on google.
My question is:
Is there any way i could update the system in the state it is now?
(Preferably without reinstalling the entire system from scratch
in /usr/src.
--
Sten Daniel Soersdal
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
of the man page is the
same as you will find in the 6.3-RELEASE.
--
Best regards,
Danielmailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
Hello Colin,
Saturday, January 19, 2008, 3:13:31 PM, you wrote:
Unfortunately, I got another error. Any ideas what is going wrong here?
I would guess a missing device scbus and/or da in your kernel
configuration file.
--
Best regards,
Danielmailto:[EMAIL
(Author)
The questions go where they are appropriate (scsi driver? perhaps
freebsd-scsi@ or freebsd-hackers@ ?).
--
Sten Daniel Soersdal
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
most often - mirror important data but store
unimportant data without it.
... But with a raid controller mirror you do not have to send the data
twice over the host bus.
gmirror is awesome
--
Sten Daniel Soersdal
___
freebsd-questions@freebsd.org
snapshot version as well.
It works fine on 6.2-RELEASE/I386 and 7.0-RC1/I386.
Before going any deeper, has anyone else noticed this?
Thanks for your time,
Dan
--
Daniel Bye
_
ASCII
Hello ??,
Sunday, January 13, 2008, 11:17:13 AM, you wrote:
Hello all,
is there any way to securely follow the STABLE branch of FreeBSD, e.g.
I am afraid that this isn't currently possible with -STABLE branches.
--
Best regards,
Danielmailto:[EMAIL PROTECTED
Volodymyr Kostyrko wrote:
Tankko пишет:
Does anyone know the answer to this? I am stuck as to how to proceed?
Rebuild subversion with apache support. That way you would not need
separate apr package.
Volodymyr Kostyrko wrote:
Tankko пишет:
Does anyone know the answer to this? I am
Ghirai wrote:
Hello list,
I had gnumeric installed, and wanted to upgrade.
portupgrade gnumeric failed because it wanted a newer version of
goffice.
I deinstalled the old goffice and did make install.
It fails here:
I'd remove devel/goffice/work and try make; make install again .
Dan
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Chris Maness wrote:
| I have two web servers -- one old, and another I have just set up. I
have tried to set up the new http.conf the same for php files, but the
new one does not automatically parse index.php like index.html. This
works on the
Kris Kennaway wrote:
No, it's not convenient. There is a large maintenance cost for
keeping the fortran compiler in the base system for little gain
(nothing in FreeBSD uses it), and it is also only of use to a small
subset of FreeBSD users, so this is a perfect situation where moving
it to
://www.postgresql.org/docs/manuals/)
Dan
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against HTML, vCards and X
-drivers
# make config
Uncheck all the ones you don't want, then
# make deinstall reinstall
to unregister the drivers you just removed, and finally uninstall all
the unwanted ones from the system.
Dan
--
Daniel Bye
Hello Andrew,
i know PCI Express Moxa cards are supported on freebsd (they provide
proprietary drivers): http://www.moxa.com/product/CP-104EL.htm
Anyway, i'm only using the ethernet to RS232 devices from Moxa, and they
work pretty well.
Cheers,
Daniel
Andrew Pantyukhin ha scritto:
What
without logging off.
HTH
Dan
[1] http://gentoo-wiki.com/HOWTO_Use_Multimedia_Keys gives details
for various window managers.
--
Daniel Bye
_
ASCII ribbon campaign
On Thu, Dec 27, 2007 at 02:30:32PM -0500, Robert Huff wrote:
Daniel Bye writes:
I have a Logitech i-Touch keyboard; standard 104 (or whatever
it is these days) setup plus a dozen extra buttons and two dials.
Great product.
It would be even greater if
a) I could get X
would like to ask, what are these PV entries, in order to be able
to tweak these numbers accordingly.
Just for the record, following numbers are set (should be defaults):
vm.pmap.shpgperproc: 200
vm.pmap.pv_entry_max: 3254323
Thanks.
--
Best regards,
Daniel
Hi,
I'm trying to mount an ntfs-3g partition but get an error when using
mount.
mount -t ntfs-3g /dev/ad6s1 /win
mount: /dev/ad6s1 : Operation not supported by device
if i use mount_ntfs-3g ... it works fine but that won't help me with
respect to mounting during boot.
Is there anything
/handbook/cvsup.html
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
Dan
--
Daniel Bye
_
ASCII ribbon campaign ( )
- against
Why are you not using the supplied scripts and configuration knobs to
start Sendmail? It works just fine for 99% of FreeBSD users (my guess),
so what makes your environment so special that your needs cannot be met
without custom scripts?
/Daniel Eriksson
can use passwd-file as well. There's some good documentation on the
web site, particularly http://wiki.dovecot.org/Authentication.
Dan
--
Daniel Bye
_
ASCII ribbon campaign
is used as a line continuation character, and is not necessary on the last
line. In fact, it must not be included, else it will cause the system to
interpret the next line as part of the same class definition, rather than
the start of the next.
Dan
--
Daniel Bye
601 - 700 of 1782 matches
Mail list logo
