/ on the gmirror? Is
there anything else specific I should think about?
--
Kjell
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr
On my old R4.6 server I get a “The connection has timed out” error when I
enter http://192.168.1.1/test while http://192.168.1.1/test/ serves the
expected page.
On my new R6.2 server http://192.168.1.1/test works as expected.
Regards from Kjell
-
Regards from Kjell
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
install the FreeBSD Boot Manager to both ad4
and ad6? Or should I first do 'fdisk -B -b /boot/boot0 ad4' from within
4.10 (as per the handbook)? Or is 'boot0cfg -B ad4' the proper way of
doing it?
My concern is of course to not mess up my current 4.10 installation.
--
Kjell
] ~ uname -a
FreeBSD homebell.dyndns.org 4.10-RELEASE-p2 FreeBSD 4.10-RELEASE-p2 #0:
Mon Oct 18 21:48:34 CEST 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/HOMEBELLapmipfw i386
--
Kjell
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
/ad4s1b Yes Yes
Virtual Memory Virtual Memory (swap) /dev/ad5s1b No Yes
Virtual Memory Virtual Memory (swap) /dev/rad5s1bYes No
Any explanation? What is rad? Is more info needed and if so: what?
--
Kjell
___
freebsd-questions
]:/usr/obj/usr/src/sys/HOMEBELLapmipfw i386
--
Kjell
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Sunday, 5 December 2004 at 11:33:23 -0500, Lowell Gilbert wrote:
Kjell Midtseter [EMAIL PROTECTED] writes:
List members!
My daily security run output contains lots of kernel log messages like the
following:
Connection attempt to UDP 10.0.0.10:1099 from 217.13.4.21:53
, Kjell
Cheers,
Rem
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
contains:
# domain name servers (dns)
pass in quick on rl0 proto udp from 217.13.4.21/32 to any port = 53 keep state
--
Should I make any changes to my firewall settings?
Regards from Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org
Avail Capacity Mounted on
/dev/ad0s1a124M 34M 79M30%/
/dev/ad0s1f 13G 40K 12G 0%/home
/dev/ad0s1e3.8G823M2.7G23%/usr
/dev/ad0s1d965M2.6M885M 0%/var
The ports and Linux comp are included, but no ports installed.
Kjell
On Thursday, 18 November 2004 at 8:36:00 -0500, Louis LeBlanc wrote:
On 11/17/04 09:47 PM, Andrew L. Gould sat at the `puter and typed:
On Wednesday 17 November 2004 08:36 pm, Louis LeBlanc wrote:
Hey all. I'm having a little trouble with postfix launch at startup
in 5.3.
At
, and compiling apm into my GENERIC
kernel.
Thoughts appreciated
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Thursday, 18 November 2004 at 10:08:51 -0600, Andrew L. Gould wrote:
On Thursday 18 November 2004 09:46 am, Louis LeBlanc wrote:
On 11/18/04 03:31 PM, Kjell Midtseter sat at the `puter and typed:
When I later went through a cvsup/portupgrade sequence, I had to
answer YES
?
Kjell
but they didn't show up.
(I did a deinstall / clean but still no help)
/usr/X11R6/share/gimp/help is never created.
What am I missing?
Thanks for any hints,
Gary
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
On Saturday, 13 November 2004 at 14:23:40 +0100, Kjell Midtseter wrote:
List members!
I started out with a clean install from a 5.3R CD. Then I cvsup'ed and built
a new
GENERIC kernel and new ports followed by installing PHP5/Apache13
After fetching the latest linux glib2.1 server/client
to be in place in httpd.conf
I get the same results when I make a new clean and cvsup'ed install from the
5.3R CD
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
On Monday, 15 November 2004 at 10:20:32 -0600, Kevin D. Kinsey, DaleCo, S.P.
wrote:
Kjell Midtseter wrote:
After installing lang/php4-extensions with apache13,
I can start using embedded php in my web pages right away.
When installing lang/php5-extensions, the embedded php
is passed
On Monday, 15 November 2004 at 14:33:02 -0600, Kevin D. Kinsey, DaleCo, S.P.
wrote:
Kjell Midtseter wrote:
On Monday, 15 November 2004 at 10:20:32 -0600, Kevin D. Kinsey, DaleCo,
S.P. wrote:
Kjell Midtseter wrote:
After installing lang/php4-extensions with apache13,
I can
On Monday, 15 November 2004 at 14:33:02 -0600, Kevin D. Kinsey, DaleCo, S.P.
wrote:
Kjell Midtseter wrote:
On Monday, 15 November 2004 at 10:20:32 -0600, Kevin D. Kinsey, DaleCo,
S.P. wrote:
Kjell Midtseter wrote:
After installing lang/php4-extensions with apache13,
I can
On Sunday, 14 November 2004 at 2:46:17 +0100, Gert Cuykens wrote:
7rxI# kldload snd_driver.ko
Did you try kldload snd_driver
(without the .so extension?)
Kjell
kldload: can't load snd_driver.ko: Exec format error
7rxI#
___
[EMAIL PROTECTED] mailing
are much appreciated!
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Thursday, 28 October 2004 at 14:21:32 +0200, Walter C. Pelissero wrote:
Kjell Midtseter writes:
On Thursday, 28 October 2004 at 3:21:26 +0200, Walter C. Pelissero wrote:
I'm trying to run FreeBSD 5.3 on a Via EPIA ME-6000, but there are
still a couple of things that don't work
is produced.
Is there anyone who has succeeded to run FreeBSD on one of these cute
Mini-ITX?
I am running 6.3 on a M-1 without any problems except that there
are no X-11 support for the 'vga' chip so I can not run a windows manager
Kjell
--
walter pelissero
http://www.pelissero.de
not change them.
GL and keep at it...
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
. Save exit.
---
GL from kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
to make changes if you do not
like
what you find.
I'm linux user, so am familiar to *nix systems, but don't know how to
configure the network specifically on freebsd...
Thanks for any comment,
Mike
kjell
___
[EMAIL PROTECTED] mailing list
http
NIC chipsets:
VIA 6103
VIA 6303
VIA 6306
Realtek 8201
I am using a VIA M-1 card where my dmsg.boot shows:
fwohci0: VIA VT6306
vr0: VIA VT6102 Rhine II 10/100BaseTX
No support for the graphics chip to run an X server though.
Kjell
___
[EMAIL
.
But there are no support for the graphics chipset, so you can not run an X server
(yet)
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
'normal operation' and 'read only'
Could be the hard way to do it. Literally.
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 19 Jun 2004 at 0:26, LW Ellis wrote:
OK force didn't work, but I renamed hostname to localhost,
until the install was done.
When I rebooted it showed mysql started.
First you have to let the SQL server know what databases and users you want to use:
1) Set password for root user after
) of the manual)
Seems like some fine tuning you can safely save for a later time.
-Kjell
Later,
Leon
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 18 Jun 2004 at 10:42, Michael W. Oliver wrote:
On 2004-06-18T16:37:47+0200, Gareth Bailey wrote:
Hi all,
I moved our work server over from 5.2 release to 4.10
stable. All seems fine except for some reason apache
(apache-1.3.31_2) doesn't sart automatically at boot time.
Does
On 18 Jun 2004 at 22:08, LW Ellis wrote:
I get the following error when I try to install mysql40-server from the
ports.
Neither host '192' or 'localhost' could be resolved with
usr/local/bin/resolveip
I went thru something similar when I was configuring apache.
I had to resolve it by
for you.
The next time you reboot you will see a startup message saying that is has been
started.
- Original Message -
From: Kjell Midtseter [EMAIL PROTECTED]
To: LW Ellis [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Friday, June 18, 2004 11:15 PM
Subject: Re: mysql install problem
your invented host name, you may try to set up a
local
DNS server that will resolve it for you.
- Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
) and have a netgear router, which functions as
a DHCP server. Do I have my network card configured wrong or is it
something else.
Try editing /usr/local/etc/apache/httpd.conf
What is your ServerName?
Kjell
___
[EMAIL PROTECTED] mailing list
http
and
/usr/local/sbin/sysinstall whereas in 4.8 I only find /stand/sysinstall.
Which one should I use with 5.2 and what's the difference between them?
--
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
Kjell B. wrote:
I just installed FreeBSD 5.2-RELEASE (using the mini-install CD) on my
laptop which already had Win XP Home + Win XP Pro on it. During
partition definition I chose not to touch the MBR. (I wanted to make
use of Windows boot.ini for booting into FreeBSD.) Nevertheless,
whenever
sites in order to find any hints on
naming conventions, but failed...
Any help would be much appreciated. I'd rather not upgrade from source.
Thanks,
Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
with this
postfix/local[617]: warning: database /etc/mail/aliases.db is older than
source file /etc/mail/aliases
You need to update the /etc/mail/aliases.db file, run portmap /etc/mail/aliases
--
Kjell Rune Glærum
AV/IT-seksjonen, Det medisinske fakultet, NTNU
Telefon: (735) 98772
the sources for the kernel and the applications using CVSUP. Then
recompile the kernel and those applications that you have installed.
You will probably find that by doing your initial install from the CD
is faster than doing the full install over the internet.
Kjell
definition.
If you want ls output to be colored, just read
the manual for ls(1).
You can look at my notes on the subject at http://freebsd.la3sg.net/
Select Instalation-Post install-bash from the menu.
Kjell
___
[EMAIL PROTECTED] mailing list
from Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Wednesday, 18 June 2003 at 0:29:52 -0400, Dragoncrest wrote:
You will have to forgive me for this. I had a fetchmail tutorial at
one point in time that someone had posted for me but I have somehow since
then lost the silly thing. What I'm doing now is running fetchmail on
not start, and that the correct keymap isn't
loaded. Is this handled differently in 5.1 than in 5.0, or have I just
missed something very basic?
My rc.conf is being read as expected on both 5.0 and 5.1 here...
Hei fra Kjell
Best Regards,
Markus Svensson
[EMAIL PROTECTED
On 4.8 I recompiled the kernel with appropriate options and I could
unplug and reconnect the keyboard at will and it worked. Not so on 5.0
What is the apropriate kernel options for this to work on 5.x?
Help appreciated, Kjell
___
[EMAIL PROTECTED
openoffice-1.1Beta.tbz I get an error.
If I try tar on openoffice-1.1Beta.tbz I also get an error.
What did you do?
Tnx from Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
updating my ports.
Regards from Kjell
Thanks for your time.
Tom
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
?
Regards from Kjell
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
From: [EMAIL PROTECTED]
Subject:disabling sendmail and using postfix
To: [EMAIL PROTECTED]
Date sent: Tue, 11 Mar 2003 17:34:20 +0100
Hi,
(freebsd newbie)
I've installed postfix from ports. At the end of the
installion script
I just rebuilt my kernel - see below. I get the following error message:
Fatal trap 12: page fault while in kernel mode.
fault virtual address= 0x0
fault code= supervisor read, page not present
instruction pointer = 0x8:0xc016851c
stack pointer
I've installed FreeBSD 4.7 and I'd like to get enabled
the APM support. I know that I can enable it by
compile it in the kernel, but I've read about another
system that consist in the writing of a line in the
/boot/loader.conf (enable apm0) but at start the
loader says that there is a
I have /usr/ports/databases/mysql323-server installed, and it is up and
running. If I do:
mysql -h localhost
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 1 to server version: 3.23.55
Type 'help;' or '\h' for help. Type '\c' to clear the
will find a nice Smart Card interface as well as info
on different smart cards.
Kjell/LA3SG
Regards,
Thib.
PS:
CC me for I'm not subscriped to -questions
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
To Unsubscribe
questions?
regards from Kjell / LA3SG
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Where can I find the .mc file that is used to make the standard
sendmail.cf file that comes with FreeBSD ?
They should all be in /etc/mail
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
the server at
ftp.dk.freebsd.org normally gives me good service..
Kjell
So am I doing something wrong?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On Monday, 3 March 2003 at 9:23:54 +0100, Roger 'Rocky' Vetterberg wrote:
Kjell wrote:
I have a gateway (sexy.la3sg.net) connected to my
ISP through a ADSL line. On my LAN I have a
workstation (tina.la3sg.net) I would like to set up
sendmail so that external mail to [EMAIL PROTECTED
On Monday, 3 March 2003 at 9:59:06 +0200, Konrad Neitzel wrote:
Roger 'Rocky' Vetterberg [EMAIL PROTECTED] wrote:
Kjell wrote:
/etc/mail/local-host.names
tina.la3sg.net
/etc/mail/virtusertable
[EMAIL PROTECTED] [EMAIL PROTECTED]
@la3sg.net
On Monday, 3 March 2003 at 13:06:05 +0200, Giorgos Keramidas wrote:
On 2003-03-03 09:51, Kjell Midtseter [EMAIL PROTECTED] wrote:
/etc/mail/local-host.names
la3sg.net
sexy.la3sg.net
tina.la3sg.net
/etc/mail/virtusertable
[EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL
://www.schlacter.net useful
Cheers from Kjell
Cheers
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
sexy.la3sg.net
tina.la3sg.net
/etc/mail/virtusertable
[EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED]
@la3sg.net [EMAIL PROTECTED]
What am I missing?
Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED
On Thursday, 27 February 2003 at 8:56:04 -, Abdul Hakeem wrote:
Hello,
Can anyone direct me to the source of commands and documentations for
setting up Vlan, Switching, Policy based routing commands and
documentations ?
For ipfilter look at http://www.pir.net/pir/ipf/ipf-howto.html
Kjell
I am trying to set up my mail system.
I am running a network with a R4.6-RELEASE gateway
(sexy.la3sg.net) with Sendmail and ipf, and a R4.7-
RELEASE workstation (syvert.la3sg.net) with
postfix, fetchmail and mutt.
I can exchange mail between the boxes on my LAN,
send mail to the outside world
On Thursday, 27 February 2003 at 9:03:52 -0600, Kevin Kinsey, DaleCo, S.P. wrote:
From: Kjell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 2:20 AM
Subject: Sendmail refuses incoming mail
I am trying to set up my mail system.
I am running a network
On Wednesday, 26 February 2003 at 12:42:30 -0500, Michael Sharp wrote:
I understand ALL IDE CD-RWs are supported under FreeBSD, but has anyone
actually used a CD-RW by LiteON ( http://liteonit.com ) and had sucess
with it under burncd?
Yes, I am using one, 48x12x48x. Works fine.
Kjell
.
Seems like you have gotten mixed up on some basics.
Suggest you google around to find out more about
ISA and PCI, then return with a restated question.
Cheers from Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
127.0.0.1:512 from
127.0.0.1:1054
each time a mail is arrives.
A second or three after the above message is shown, the mail pops up in mutt.
What causes the message, and how do I eliminate it?
Regards from Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
be you would find
http://people.freebsd.org/~picobsd interesting reading?
There was a thread about someone compiling it using R4.7
Kjell
Thanks for the help!
Terry
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
To Unsubscribe
On Friday, 21 February 2003 at 20:08:17 +0200, Jim Xochellis wrote:
Hi List,
I have a FreeBSD 4.7(i386) Release router I am trying to make it run
with the ipf firewall on.
I have compiled and installed a new kernel with ipf support and then I
put the following lines inside my rc.conf
into the drawer the computer
will turn itself on at 06:00 the next morning.
If I put the FreeBSD disk into the disk drawer and issue a
shutdown -p command the computer will turn itself off OK.
But the next morning it does not turn itself back on at 06:00!!!
Regards from Kjell
Regards,
Shantanu
On Wednesday, 19 February 2003 at 16:24:45 -0600, kitsune wrote:
How do I update /usr/ports?
You will find step by step instructions of you look at
freebsd.la3sg.net
Cheers from Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
is to have the box turn on, do its
thing and turn itself off until the next morning.
Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
in sometimes but have su
authority. The problem is that my prompt doesn't change, so I forget
that I am su.
When you do a su the contents of your ~/.bash_profile should be read.
While the contents of ~/.bashrc is ignored. Do you have a ~/.bash_profile ?
Kjell
To Unsubscribe: send mail to [EMAIL
should have any references that I should consult, I would appreciate any
pointer!
Thank you from Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
[syvert]
comment = Syvert's folder
path = /home/syvert/samba
writeable = Yes
# valid users = syvert
guest ok = Yes
Regards from Kjell
# Samba config file
# Whenever you modify this file you should run the command testparm
# to check that you have not made
I am trying to install PHP4 as a CGI module.
When doing the install from ports, it seems like
make -D STANDALONE
is ignored during the install, as the Apache API module gets installed instead.
What would be the proper procedure?
Kjell
(using R4.7p4)
To Unsubscribe: send mail to [EMAIL
my dmesg:
-
CPU: VIA C3 Samuel 2 (799.73-MHz 686-class CPU)
Origin = CentaurHauls Id = 0x678 Stepping = 8
Features=0x803035FPU,DE,TSC,MSR,MTRR,PGE,MMX
---
You need 686 class cpu
Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
fails.
Has the procedure for installing the CGI version
changed lately?
Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
have ATX
You need the kernel code for apm(4).
To enable shutdown -p to function, build the kernel
with apm enabled:
Comment out line with device apm0 and insert new
line containing just device apm0
device apm0
Then insert into rc.conf
apm_enable=YES
Kjell
To Unsubscribe
?
thanks,
# ls -la .bashrc
Check the permissions. Hope this helps.
Try cp .bashrc .bash_profile
kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
: Cron operator@tina /usr/libexec/save-entropy
Message:vidcontrol: not found
How can I stop it? Running R5
Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
of the PC
power using the recompiled kernel.
I am using the same PC in both cases. I did a r5.0 install on a virgin HD.
Any hints on what is different in R5.0 is appreciated.
regards from Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
when using rc.firewall
firewall_script="/etc/rc.firewall" #original and unmodified
firewall_enable="NO" #leave firewall with 'pass/block all' line only
Also running ipfilter with a ruleset that leaves the firewall wide open.
regards from Kjell / LA3SG
To Unsubscribe:
way to solve my problem than to change the email
addresses on each of the PCs?
regards from Kjell / LA3SG
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hi!
I have followed the instructions on the mysql.com site to set up mysql
to log all changes to my data base. This works fine. But when I reboot
the PC I have to manually restart the logging. How can I automate this?
regards from Kjell/LA3SG
To Unsubscribe: send mail to [EMAIL PROTECTED
backup?
For location of old kernel, see http://www.schlacter.net (towards the end)
gl from Kjell
Also, if anyone has a link on the rollback procedure on a FreeBSD kernel
(4.6) that would be greatly appreciated also. My searches on FreeBSD.org and
google haven't turned up much. Mostly mysql
variables you have to use to get your
internal/local and external IP addresses
gl de Kjell
NAT, when configured in the usual way, shouldn't affect the source
address of an incoming packet -- just the destination. Similarly it
should rewrite just the source (internal) address on outgoing
comes up as expected
I really don't know what else to do. I recently had
RedHat on it and it worked fine...and X works fine
except for the resolution.
All help is appreciated.
Kevin
gl from Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
wish. I also have a nice
systematic upset for adding webalizer and mrtg statistics.
Good luck from Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
disk drive with a frog?
Probably won't help.
In my case I suspect that my CD burner or the media I am using must
be the culprits. I have downloaded the 4.7 ISOs from three different
mirrors, burned 4 CDs using two different burning programs. No luck.
Regards from Kjell/LA3SG
To Unsubscribe
> >> (11.04.2002 @ 0058 PST): Kjell said, in 0.4K:
> > List members!
>
> Ahoy!
>
> > Is it possible to use cvsup on selected ports to go from 4.7 STABLE to
> > 4.6.2 RELEASE?
> >
> > The reason I want to do this is that graphics/GD2 does not bu
-
STABLE_and_IPFILTER.html
Kjell
James
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
copy of 4.6.2,
and the resulting CD was perfect.
Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
that my TV card is a NTSC
card?
Tnx from Kjell
==dmesg for Abit (working)
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988,
1989, 1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved
at
www.zoneedit.com you will find that it will interogate your ADSL
modem, save the current IP nr. in a file, update their DNS server
and email you when the IP nr. changes.
Hope this can be of help?
Kjell
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
97 matches
Mail list logo
