on mt CVSUPPED to 4.8 (was 4.7) FBSD
Thanks
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
fell of the wagon!
I tried fsck / but NO WRITE still
I tried mount -a /
then fsck /
But no dice...
If only I knew what the... I was doing.
Help required and gratefully acknowledged
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org
Hi all
In su mode, I do fsck -p and it tells me the system is NO WRITE.
Is this correct?
If I read the docs rightly...it is?
Signed dazed and confused
Thanks
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
HI Dan and thanks,
So do I read you correct that the NO WRITE is what I should see?
Keith
In the last episode (Jul 16), [EMAIL PROTECTED] said:
Hi all
In su mode, I do fsck -p and it tells me the system is NO WRITE. Is
this correct?
If I read the docs rightly...it is?
Signed dazed
to /usr/local/etc/webmin/module.infos.cache : No such file
or directory.
Is there conf info stored in places I know not. How can I clean it up?
I need sort of concise help if it exists cause I wouldn't call myself the
cluiest user.
Thanks
Keith
___
[EMAIL
.
Thanks if you can help
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
.
Help please needed badly...typical..its mission critical in our school
Thanks Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi Victor thanks,
I had deleted that one persons account but it staill happens!
What is the qmail-remote thing??
Any ideas?
Keith
On Thu, 17 Jul 2003 [EMAIL PROTECTED] wrote:
Hi good people.
I am not the cluiest here.
Suddenly my fbsd 4.7. qmail router/gateway is dead slow and
ps -ax
clients...(using their
address book)
What say you?
Keith
Hi, dear All!
qmail-remote sends mail to remote hosts as long as qmail-local sends
local mail (inside the box). how many qmail-remote processes do you have
(ps ax|grep qmail-remote|wc -l)? did you try to delete the messages from
the queue
/lib etc.
What to do?
Do I get the tar ball and make install clean? Or what.
Sorry to be a pest but Webmin is crucial for me.
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
while I can't send mail to
any email account on it? Is this an exchange hassle? Is port 25 to be only
tcp or udp as well.
Thanks
keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
delivered to mailboxes
there so what the???
Any ideas?
Thanks Keith
[EMAIL PROTECTED] wrote to Free bsd :
Hi all,
I am trying to connect to an exchange server via my new gateway
ipfilter fbsd 4.7 ipnat firewall.
Telnetting to the server inside to port 25 reveals...
Connected to 203.44.yyy.xx
occasions
for help here but with no great success. Very unusual for the good people
on this list. Maybe we ask too much?
Keith
This involves a lot of info so perhaps some pithy writing will help.
The related hardware:
-FreeBSD 4.8-stable computer with a 56K Best Data external modem and a
NIC to my
a dummy here but an not a FBSD guru
Keith
Thanks in adv
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
the slices or
something???
Whoa any cluey ideas?
Thanks - Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
in please?
Thanks
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
slice/partitions?
In a bind(4) here! anyone clue me in please?
Thanks
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED
) and swap reports getswapspacefailed a lot under load.
Hrrummph!
I figure a dump, rebuild (with vinum mirror bootstapped) and restore might
help but the mote I think hte more I think ???
Thanks Keith
On Saturday, 31 May 2003 at 13:39:49 +1000, [EMAIL PROTECTED] wrote:
I have a one and only drive
??
Appreciate help
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi..what legends are FBSD people!
Keith
[EMAIL PROTECTED] wrote:
[ ... ]
1049884671.477240 10.0.1.121 TCP_HIT/200 744 GET
ftp://ftpav.ca.com/pub/inoculan/scaneng/Siglist.txt - NONE/-
text/plain ... Whoa!
Anyone know of a port to analyse this stuff and change what MIGHT be a
timestamp
Hi all...
I found this ()
I have FBSD 4.7 system...is this article still ok or even the best way to go?
Any ideas welcome
Keith
==8 snip snip
Adding more SWAP space
I recently mined this info from the STABLE mailing list and thought it
would make a great mini-tutorial
#---No worky!
==8 snip=
I can figure there is a problem with this but dont have a clue how to fix it
I want to use fqdns inside not local ip addrs. It is more convenient for
users. BTW the ip address works fine...just the rdr or lookup stuff is
faulty
Help???
Thanks
Keith
questions people rock)
Keith
On Wednesday 09 July 2003 01:23 pm, [EMAIL PROTECTED] wrote:
Hi all.
On my 4.7 system, I have ipfilter and ipnat.
I have several live ips aliased to my external ADSL interface. Some
of these are mapped into private internal ips. So far so good. All
works fine from outside
Hi all,
I have a friend with a cisco 827 adsl router. It has config hassles but
when that is sorted, we need to setup a freebsd box inside the cisco
router to handle a /29 block of ips. 3 questions...
a) Should I assume the cisco is not the worlds greatest firewall and setup
the freebsd machine as
is the scheme...Will this work is it best? Thanks heaps
Keith
ISP
(165.228.233.1)
|
[ADSL Internet]
|
(165.228.233.190
language to me.
I would greatly appreciate it. My balls are now on the line here. I should
never volunteer to help!?
Am i close?
Keith
[EMAIL PROTECTED] wrote:
I have a friend with a cisco 827 adsl router. It has config hassles but
when that is sorted, we need to setup a freebsd box inside
Hi all,
I have Found a rule in my ipf firewall rules file.
it allows in my agetway machine running webmin etc etc. to port 3306 from
any.
Now I may well have added this rule but I didn't comment it (Not like me!)
Any clues as to what that port is for? Services file has no listing.
Thanks
Keith
Yeah fair comment Ricardo
Thanks
Hi Keith,
Since you are on the matter, I would also recommend using your firewall
to stop unwanted requests to that port. For example, try instead of
any, allowing your webserver (in case of webdriven websites) and only
servers that need to have access
this rule but I didn't
comment it (Not like me!) Any clues as to what
that port is for? Services file has no listing.
Thanks
Keith Spencer
IIRC, that's MySQL.
Kevin Kinsey
DaleCo, S.P.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hi,
Could you please tell me a way to remove freebsd from my computer.
Thanks for your time.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
__asm __volatile(movl %%fs:0,%0 : =r (td));
What might be the cause for this? It is the in the same place every time.
Once the machine hung and had to be powercycled. But on the screen was the
same page fault error on the same process.
Is this flaky hardware?
Thanks,
Keith
On Mon, 1 Dec 2008, Mel wrote:
|-On Monday 01 December 2008 19:32:59 Keith wrote:
|-
|- ==
|- kernel trap 12 with interrupts disabled
|-
|- Fatal trap 12: page fault while in kernel mode
|- cpuid = 2; apic id = 02
|- fault virtual address = 0x104
|- fault code = supervisor read
Have the above server, drive 0 failed. No onsite spares left. Ordered
replacement drives a week ago but they are still on route and wont be here
till Jan 5 or 6.
All I have is a test server of the same make/model in my test rack
configured and running a slightly different version of FBSD.
If I
Have an ancient 4.1R mail server to replace.
It has about 3000 accounts. Usual /var/mail to store mail.
/var/mail is RAID5 on an old Dell PERC3 card. Its worked
pretty well and have lived through 3 drive failures over
the years.
New Dell box with a PERC5/i. Same drive setup, a 500GB
RAID5 for
Good Morning,
I have been running freebsd for 2 ½ years now and currently run
23 freebsd 4.9 servers
I actively encourage everyone to switch to freebsd and have helped many
switch.
What does it take or what are the requirements to get a freebsd.org email
address ex: [EMAIL
Ok, I'm not totally a newbie but, I'm definitely no expert in FBSD. When I
was doing my original install, it was on a p100 w/ 32 megs of ram, so I gave
myself a 1 gig swap partition to help alleviate some of the server load.
Now, I have moved this install to a AMD K6/2 500MHz with 512 megs of
I just purchased FreeBSD 5.1 and got it installed sucessfully-YEAH!-yesterday. I am a
new newbie with no previous experience with UNIX, so I feel this is a wonderful
accomplishment. I ran accross one problem, though. Every time I installed ALL, the
installation froze after about 30 minutes.
. But I can't
even get into the installation process because of this issue.
Can anyone help? I've searched newsgroup and e-mail list archives and have found
nothing relevant.
- Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman
to mount any CDs. I do notice that when the
kernal load while booting from the CD, it detects all 5 of my disk devices.
Anyone else want to take a stab at this? One user's choice of whether to
love or hate FreeBSD hangs in the balance...
- Keith
- Original Message -
From: fbsd_user
Good
of software to expect it to
work right. I'm not a developer, and shouldn't have to be. That's why
*other* people are developers, so that I don't have to be.
- Keith F. Kelly
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
. And of course many users are running
into this issue where the drive geometries reported and used by their BIOS
are simply rejected by fdisk as invalid whenever they try to enter them
into fdisk, which makes no sense to me.
- Original Message -
From: Jerry McAllister [EMAIL PROTECTED]
To: Keith
Yes, I tried it both ways (installing BootMgr, and installing a standard
MBR).
- Original Message -
From: Chris Pressey [EMAIL PROTECTED]
To: Keith Kelly [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Thursday, January 22, 2004 2:38 PM
Subject: Re: FDisk won't detect
See comments in-line.
- Original Message -
From: Charles Swiger [EMAIL PROTECTED]
To: Keith Kelly [EMAIL PROTECTED]
Cc: freebsd-questions [EMAIL PROTECTED]
Sent: Thursday, January 22, 2004 2:56 PM
Subject: Re: FDisk won't detect or accept correct disk geometry from BIOS
On Jan 22
was
still able to boot off a DOS floppy, format the hard drive as a system
device and put a minimal DOS install on it, and boot fine off the hard drive
into DOS.
- Original Message -
From: Jerry McAllister [EMAIL PROTECTED]
To: Keith Kelly [EMAIL PROTECTED]
Cc: Chris Pressey [EMAIL
Inline.
- Original Message -
From: Charles Swiger [EMAIL PROTECTED]
To: Keith Kelly [EMAIL PROTECTED]
Cc: freebsd-questions ORG [EMAIL PROTECTED]
Sent: Thursday, January 22, 2004 3:27 PM
Subject: Re: FDisk won't detect or accept correct disk geometry from BIOS
On Jan 22, 2004, at 6
My thought here is to double check that the drive is in the master
position on the ribbon.
Yeah, you would _think_ that would be the way to configure things. But when
I configure the two devices that way (CD-ROM as slave, hard drive as
master), sysinstall refuses to mount the CD, giving me
different C/H/S
settings and will be unable to read any partitions that were formatting
using different C/H/S addressing. So while there is a workaround, it is far
from an ideal user experience.
- Keith F. Kelly
_
Check out
I wrote the message to which you replied, not Michael Clark.
See my comments in-line.
From: Hendrik Hasenbein [EMAIL PROTECTED]
To: Michael Clark [EMAIL PROTECTED]
CC: 'Keith Kelly' [EMAIL PROTECTED], Derrick Ryalls
[EMAIL PROTECTED], freebsd-bugs [EMAIL PROTECTED],
'freebsd-questions ORG
See my comments in-line.
From: Hendrik Hasenbein [EMAIL PROTECTED]
To: Keith Kelly [EMAIL PROTECTED]
CC: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: FreeBSD/FDisk geometry problems - SOLVED!
Date: Sat, 24 Jan 2004 10:43:17 +0100
Keith Kelly wrote:
I've found a bug in FDisk which
Hi all,
I recently installed the perl-5.8.2_5 port and ran 'use.perl port' to make
that new perl the default system perl. I did several other upgrades at about
the same time and since then: kernel cvsup and rebuild to 4.9-RELEASE-p4, and
weekly cvsup to update my installed ports.
It seemed
On 3/23/2004 8:37 AM, Joshua Lokken wrote:
So, does it seem reasonable that switching perl could have caused/solved
this problem? How 'bleeding edge' is doing a 'use.perl port'? Is it
something that indeed requires a large rebuild of one's system? If so, how
does one go about finding the
part of the install select A
I didn't like the setup so I deleted all and recreated my scheme.
Quit disklabel with Q
When prompted for the boot manager I chose Standard (no boot manager)
The install continued and viola, the box booted normally.
Hopes this helps.
Regards,
Keith
.
What is going on here or has Marty got it all wrong?
Thanks Keith
http://greetings.yahoo.com.au - Yahoo! Greetings
- Send your seasons greetings online this year!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Gleiser [EMAIL PROTECTED]
wrote: On Tue, 17 Dec 2002, Keith Spencer wrote:
Hi all,
Marty Schlacter is obviously the man. I am
following
his firewall tute religiously but I am doing
something
wrong!
I have an ipf.rules EXACTLY like his. Works a
treat...but only if I remove the kernel
sorry guys the copy paste mucked up on me...
Here is the full rule set I am using...
#
# Outside Interface
#
does and no one else reports
hassles with it? Any clues Fer et al?
Keith
What's your internal interface? what's your external
one? Is this box
acting as a router? are you using user ppp or mpd?
How many NICs does
this box have?
It seems to me that your ruleset is incomplete. Send
--- Fernando Gleiser [EMAIL PROTECTED]
wrote: On Wed, 18 Dec 2002, Keith Spencer wrote:
sorry guys the copy paste mucked up on me...
Here is the full rule set I am using...
But the questions I sent in my previous mail remain
unanswered.
post the answers and maybe I can tell what's
mail fro
the postmaster account but no others!
I have no idea where to look to config it. Any clues
guys?
Keith Spencer
http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
Hi Brian
--- Brian Jackson [EMAIL PROTECTED] wrote:
Keith Spencer wrote:
But qmail bounces incoming mail claiming the
account
does not exist on the server. It will deliver mail
fro
the postmaster account but no others!
I have no idea where to look to config it. Any
clues
guys
.
For the few shell accounts e.g. my shell account
(Keith) as you can see from the logs it believes the
accnt exists but can deliver.
For a virtaul user accounts it doesn't even recognise
the account exists at all!
I would really appreciate help as I am a little
clueless. I have tried to hack but am
]
etc etc.
I use courier imap qmail and squirrelmail.
What is this? Where else should I look?
I have no experience with security hassles on fbsd (if
that is what this is)
Please help
Many Thanks
Keith
http://mobile.yahoo.com.au - Yahoo! Mobile
- Check compose your email via SMS on your Telstra
.
Btw, on a previous posting I saw instructions to ls -l /dev/acd* and then
to cd /dev rm /dev/acd* ./MAKEDEV acd0. Would this have any
bearing on this situation?
Thanks,
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
and restarted, see if it would
speed up. But this new install is slowing down at the same spot.
This is a new personal record for taking the longest to install.
Thanks,
Keith
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman
!
Thanks
Keith
http://mobile.yahoo.com.au - Yahoo! Mobile
- Check compose your email via SMS on your Telstra or Vodafone mobile.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
interupt the boot and do something?
This is a mission critical machine darn it...Oh dear!
Keith
--- Adam [EMAIL PROTECTED] wrote: On Fri,
2003-06-27 at 23:57, Keith Spencer wrote:
Want to hear a tale of stupidity and woe.
I screwed up fbsd 4.7 system rc.conf and can only
seem
to boot
Yet again the FBSD community kick goals!
Thanks heaps
Keith
--- Roland Wells [EMAIL PROTECTED] wrote:
adam,
try:
fsck -y (check the filesystem)
mount -uw / (mount root filesystem read/write)
if you saved a backup of the rc.conf, all you have
to do is:
mv /etc/rc.conf_backup_file /etc
think I do! Am I right or am I right?
I have ipfilter on this machine with ipnat setup tonat
the 10.0.0.0 addresses.
Also, I suppose I could setup ipnat to do mapping of
xxx.xxx.xxx.xxn addresses into 10.0.0.n private
address.
what say you?
Thanks
Keith
http://mobile.yahoo.com.au
in the firewall.
Hmmm How am I doing now?
PS Do I benefit from bridge mode on the modem?
Keith
--- Micheal Patterson [EMAIL PROTECTED] wrote:
- Original Message -
From: Keith Spencer [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, June 28, 2003 5:25 PM
Subject: A routing/IP/NIC
Hi all,
I seek to add 30 or so aliases to an extrenal NIC
But a ping and and ifconfig -a
only shows the first 2 IPs bound to the NIC the rest
of the 210.15.203.xxx ips are ignored...
I am sure it is something obvious but what?
Thanks
Keith
+
ifconfig_interfaces=fxp0
Someone said I only look stupid...but hey maybe that's
why I am stupid! OOPS! I goofed again. Thanks and
sorry
Keith
--- Kevin Stevens [EMAIL PROTECTED]
wrote:
On Saturday, Jun 28, 2003, at 21:00 US/Pacific,
Keith Spencer wrote:
Hi all,
I seek to add 30 or so aliases to an extrenal
Thanks
--- Roman Neuhauser [EMAIL PROTECTED] wrote:
# [EMAIL PROTECTED] / 2003-06-28 16:04:58
+1000:
--- Adam [EMAIL PROTECTED] wrote: On Fri,
2003-06-27 at 23:57, Keith Spencer wrote:
Want to hear a tale of stupidity and woe. I
screwed up fbsd 4.7
system rc.conf and can only
?
Thanks Keith
http://greetings.yahoo.com.au - Yahoo! Greetings
- Send your seasons greetings online this year!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
webmin to add the new users... I have 600 users to
add.
Whoa...thats a lot of work..HELP???!!
Thanks so much in adavnce
Keith
http://greetings.yahoo.com.au - Yahoo! Greetings
- Send your seasons greetings online this year!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd
...
# tai64nlocal logfile qmaillog.tmp ...Do I sub
in something for the logfile thing?
I know I seem a bit dopey... but it would really help
so I dont screw up my machine.
Thanks in adavnce if you can help
Keith
Keith Spencer wrote:
Hi all,
I am wondering how I can add mail acocunts
without
also alleviate these problems or if this is just par for the course
when using projects that people have not moved into the ports collection?
Keith
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Giorgos Keramidas
Sent: Thursday, January 13, 2005 3:48 PM
to set the labels and mount the errant drive.
Keith
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I was wanting to know when Vmware 5.0 workstation will be in the ports tree, or
if there is a way to install the boxed version.
Thanks,
Keith Owen
Is there any kind of a utility that I can run to detect a new network card
that I just installed into an existing FreeBSD 5.4 box?
Thanks,
Keith
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
of the new NIC?
Thanks in advance,
Keith
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
and rebooted the system hoping that
would cause something to update properly but there was no change.
Are there additional steps that have to be taken?
Thanks for your help so far,
Keith
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Svein
Halvor Halvorsen
I believe so but for some reason it is still not showing up in ifconfig or
as a dev node. Do I need to do something special for FreeBSD to start
recognizing it at boot?
-Original Message-
From: Peter Giessel [mailto:[EMAIL PROTECTED]
Sent: Thursday, December 08, 2005 3:02 PM
To: Keith
I have not compiled a kernel. This is a standard FreeBSD 5.4-Release
installation. How can I check to see if the loadable module is installed?
Keith
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Odhiambo
Washington
Sent: Friday, December 09, 2005 12
ipconfig -a doesn't show the skc0 device which I believe is my ultimate
problem. Can I infer from your earlier message that this means the sk module
is not being loaded or is not available? How can I check to see if the
loadable module is installed?
Thanks,
Keith
-Original Message-
From
-Original Message-
From: Loren M. Lang [mailto:[EMAIL PROTECTED]
Sent: Friday, December 09, 2005 9:06 AM
To: Peter Giessel
Cc: Keith Bottner; 'FreeBSD Questions'
Subject: Re: Detect hardware changes
On Thu, Dec 08, 2005 at 12:02:25PM -0900, Peter Giessel wrote:
On 12/8/2005 11
-Original Message-
From: Alex Zbyslaw [mailto:[EMAIL PROTECTED]
Sent: Monday, December 12, 2005 4:55 AM
To: Keith Bottner
Cc: freebsd-questions@freebsd.org
Subject: Re: Detect hardware changes
Keith Bottner wrote:
I have not compiled a kernel. This is a standard FreeBSD 5.4-Release
. If SCTP could be used instead
then that would definately be the better solution. Any ideas?
Thanks in advance,
Keith
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
time, it is quite an interesting problem so I am
hoping to get some insightful answers.
Keith
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
time, it is quite an interesting problem so I am
hoping to get some insightful answers.
Keith
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
on the wireless
card in the router log. If I run dhclient ral0 and it trys to find the
server without success.
I have all the settings on the wireless card entered, wepkey, station,
channel etc.
Any suggestions as to what I am doing wrong?
Thanks
Keith
--
No virus found in this outgoing message.
Checked
Hello,
I'd like to try recording through the microphone both for skype and for
general audio recording but can't figure out how to get sound out of the
microphone.
The Handbook's 7.2.2 Testing the Sound Card section is a great set of
simple instructions for testing of playback (cat
On 01/24/06 07:11, uidzero wrote:
It's worked flawlessly for me after I add recompiled the kernel with
sound support. (I use Skype as well.)
Thanks and glad to hear that Skype is working. Listening to music, etc.
works just fine for me too, it's how to get input from the mic which I'm
On 01/24/06 15:40, Danny Pansters wrote:
mixer recsrc must be mic, do you have that?
yup. Both mixer and aumix tell me so.
ugh.
ksb
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
update inconsistency
etc etcetc...
HELP!
Is this fatal (please say no) How do I continue best?
Regards
Keith
http://personals.yahoo.com.au - Yahoo! Personals
New people, new possibilities. FREE for a limited time.
___
[EMAIL PROTECTED] mailing list
if
necessary)
Thanks
Keith
http://personals.yahoo.com.au - Yahoo! Personals
New people, new possibilities. FREE for a limited time.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Thanks all
Keith
--- Daniela [EMAIL PROTECTED] wrote: On Wednesday 19
November 2003 04:34, Keith Spencer
wrote:
Hi all,
System = 4.7
all Intel
I have a filesystem mount error
/dev/ad0s1e i.e. /var
is dirty.
1)the first I noticed trouble was a system freeze.
Untold screen logged
off site
So comments?
Is dump easier (for a dill like me) to use or
whatever?
What say you
Thanks
Keith
--- Ruben de Groot [EMAIL PROTECTED] wrote: On Wed,
Nov 19, 2003 at 09:43:30AM -0500, Lowell
Gilbert typed:
Keith Spencer [EMAIL PROTECTED] writes:
[...]
a) Throw another drive
Keith McKay
Hamilton, Scotland
e-mail keith attt clanmckay.co.uk
.. in cyberspace no one can see your beard..
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Yes. I was going to use it just for data. I'll try adding it to
/etc/fstab.
Thanks for the tip
Keith
- Original Message -
From: Francisco Reyes [EMAIL PROTECTED]
To: Keith McKay [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Friday, January 09, 2004 2:01 PM
Subject: Re: Problems adding
input,
Keith
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
What do I need to install to make printing a pdf from the print
command in an appliction as an option.
It looks like panda may do this, but I'm unsure.
My immediate goal is to be able to print invoices to .pdf from
gnucash.
___
1 - 100 of 192 matches
Mail list logo