On Wed, Mar 13, 2024 at 08:55:30PM +, david farrell wrote:
> Hi I am having some problems with gphoto2 auto detect errors, hope someone can
> help.
>
> 1. gphoto auto detect error :[ 'Model Port ' , ' _ _ _ _ _ _ _' ]
> 2. gphoto - - auto detect error : Command ' gphoto - - auto detect ' retur
Hi I am having some problems with gphoto2 auto detect errors, hope someone can
help.
1. gphoto auto detect error :[ 'Model Port ' , ' _ _ _ _ _ _ _' ]
2. gphoto - - auto detect error : Command ' gphoto - - auto detect ' returned
non- zero exit status 139.
I keep getting these errors in my Web U
Hi,
First, try to switch the A6400 to PC Control mode in its USB menu
and see if that already helps.
In that cases it should be shown by commands like
lsusb
gphoto2 --auto-detect
If not, check "dmesg" output if there are USB troubles when the camera
tries to connect to the Pi.
Hi,
On Fri, Sep 22, 2023 at 10:13:45PM +0200, r.hoffmann--- via Gphoto-devel wrote:
> Good evening,
>
> i am struggling to connect the E-M10 via gphoto2.
>
> This cam isn't in the list of supported cams.
>
> Autodetect tells me it is a E-M5.
>
> Maybe it is possible to get support for this cam?
>
Good evening,
i am struggling to connect the E-M10 via gphoto2.
This cam isn't in the list of supported cams.
Autodetect tells me it is a E-M5.
Maybe it is possible to get support for this cam?
Thank you very much
Robert
___
Gphoto-d
rch 2023 09:55
> To: Kindschi Valentin
> Cc: gphoto-devel@lists.sourceforge.net
> Subject: Re: [gphoto-devel] gphoto2 Unspecified error: Liveview cannot start:
> Sequence error
>
> Hi,
>
> "sequence error" is reported by the camera as "liveview blocker".
Hi,
"sequence error" is reported by the camera as "liveview blocker".
Given the long usage time, it might be hardware related.
Does liveview work on the camera itself still?
Ciao, Marcus
On Wed, Mar 01, 2023 at 08:37:18AM +, Kindschi Valentin via Gphoto-devel
wrote:
> Hello,
>
> I have a
ssage-
From: Marcus Meissner
Sent: Wednesday, 1 March 2023 09:55
To: Kindschi Valentin
Cc: gphoto-devel@lists.sourceforge.net
Subject: Re: [gphoto-devel] gphoto2 Unspecified error: Liveview cannot start:
Sequence error
Hi,
"sequence error" is reported by the camera as "liveview
Hello,
I have a Nikon DSC D5600 wired to a Raspberry Pi taking a picture every minute.
This setup worked for months and suddenly stopped working yesterday. The error
message is:
*** Error ***
Liveview cannot start: Sequence error
*** Error (-1: 'Unspecified error') ***
I restarted the camera,
Liebes gphoto2-Team,
ich habe eine alte Olympus-E-5 ausgegraben und wollte die jetzt versuchen in eine Fotobox zu stecken und dafür würde ich gerne Bilder über gphoto2 aufnehmen.
Wenn ich richtig recherchiert habe, müsste das möglich sein, da
Hi,
This Panasonic (and I think all others of the DMC series)
does not support remote capture to our knowledge and according
to your debug logs.
This is a camera side limitation, it is not offering it.
libgphoto2 can only download pictures from it.
Ciao, Marcus
On Wed, Aug 31, 2022 at 06:11:2
Hello I am writing to you because i need to get my DMC-G70 to work with GPhoto2.
jfk@fotobooth:~ $ lsusb
Bus 002 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s
bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA
6Gb/s bridge
Bus 002 Device 001: ID 1
Hi,
To our knowledge remote control over USB is not possible
for the Lumix series.
I implemented remote control over WIFI for lumix, but this is of course
a quite different access method.
Ciao, Marcus
On Tue, Apr 26, 2022 at 06:23:56PM +0200, Christoph Harth wrote:
> Hello,
>
> i want use my P
dloisphotography
> #jerryandloisphotography
>
> Honoring Lois, My Darling Forever:
> https://www.facebook.com/groups/LoisMyAngelForever
>
> -Original Message-
> From: Marcus Meissner
> Sent: Thursday, April 7, 2022 1:19 AM
> To: Jerry and Lois Photography
&g
al Message-
From: Marcus Meissner
Sent: Thursday, April 7, 2022 1:19 AM
To: Jerry and Lois Photography
Cc: gphoto-devel@lists.sourceforge.net
Subject: Re: [gphoto-devel] gPhoto2 | Camera support | hoping I have the
correct contact
Hi,
I had the first report of Z9 2 days ago for libgphoto
ois, My Darling Forever:
> https://www.facebook.com/groups/LoisMyAngelForever
>
> -Original Message-
> From: Marcus Meissner
> Sent: Thursday, April 7, 2022 1:19 AM
> To: Jerry and Lois Photography
> Cc: gphoto-devel@lists.sourceforge.net
> Subject: Re: [gphoto-devel] gPho
Hi,
I had the first report of Z9 2 days ago for libgphoto2.
Even with 2.5.29 it will:
- capture images
- capture preview / liveview
- some limited basic configuration for remote control
This camera agains "hide" the config options from me, have not yet time
to find how to get them.
Ciao, Marcu
Hello,
This is kind of a "grabbing at straws" question.
I am a backer of a photography kickstarter project called "Benro-Polaris" (aka
"Polaris), a tripod head with some significant automation/smarts. I'm also a
member of a FB group involved with the same, and one of the admins there
suggeste
mich wieder. Bis dahin eine schöne Zeit und einen guten Start in die
neue Woche.
Danke
Thomas
-Ursprüngliche Nachricht-
Von: Marcus Meissner
Gesendet: Sonntag, 6. Februar 2022 15:37
An: tspan...@gmx.de
Cc: gphoto-devel@lists.sourceforge.net
Betreff: Re: [gphoto-devel] gphoto2
Halli Hallo,
On Sat, Feb 05, 2022 at 07:51:31PM +0100, tspan...@gmx.de wrote:
> Hallo zusammen,
>
> zunächst ein großes Dankeschön für das überaus gelungene Programm.
>
>
>
> Ich habe ein kleines Programm geschrieben, in dem alle 10 Sekunden ein Bild
> gemacht werden soll.
>
> Das funktionie
Hallo zusammen,
zunächst ein großes Dankeschön für das überaus gelungene Programm.
Ich habe ein kleines Programm geschrieben, in dem alle 10 Sekunden ein Bild
gemacht werden soll.
Das funktioniert auch so weit gut.
Unwillkürlich, nach 2 Bildern oder nach 20 Bildern, kommt es vor, dass die
Ka
Hi,
Currently GoPro cameras are not controllable over USB via libgphoto2,
we can only download the images from them.
If the GoPro has a WIFI module, there is seperate software that could
control it over wifi.
At least the GoPro Hero class we know about, but I guess the GoPro Max
is similar restr
Dear Sir/Madam,
Does gphoto2 support the GoPro Max, or will this be a feature in the near
future?
I am working on a project on a construction site, where we will need 360
degree time lapse or live feed that will need to be controlled remotely.
The only way in which we have figured we can do this
Hi,
I am afraid this series of cameras does not support remote capture.
The Sony Alphas do (both the smaller form factor and the larger), but not
the SONY Cybershot.
You could check if there is a "PC Remote" option in its USB Menu on camera,
but I fear there is none.
Ciao, Marcus
On Sat, Jan 2
Hello dear gPhoto-Team,
I am trying to add a Sony DSC-W830 camera, to take pictures with a Raspberry Pi.
Unfortunately, this camera is not working with gPhoto and is not listed in
supported camera list.
I enabled the PTP/MTP Mode in the camera settings. As requested, I attached you
the summary
Hi,
I am trying to establish connection between gphoto2 and panasonic g80/85
but it seems I can only come up to auto detect, where camera is detected
but cant pass the capture image and therefore I believe it will not work
with octolapse. I am attaching 3 log files:
config.txt
my-logfile.txt
summa
On Fri, Apr 02, 2021 at 10:14:34PM +0800, - wrote:
> For Sony ilce 7m3 error, try to call gPhoto2, often no response, but
> occasionally can connect. Is it an operation error or gPhoto2 is not
> supported at present
?
Is the camera in PC Control mode?
It usually should work without issues, we
For Sony ilce 7m3 error, try to call gPhoto2, often no response, but
occasionally can connect. Is it an operation error or gPhoto2 is not supported
at present___
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/
MTP mode allows me to import photos, but I am not able to do this in PC
Control mode. I also do not seem to have LiveView working either for
either setting.
MTP MODE
jamespet@Apollyon:~$ gphoto2 --port usb: --abilities
Abilities for camera : USB PTP Class Camera
Serial port support
Hi,
(reply in german, but basically Minolta DiMAGE Z6 is not supporting capture).
Die Minolta DIMAGE Z6 kann leider firmware seitig kein remote control.
Da koennen wir auf libgphoto2 Seite nichts machen.
Ciao, Marcus
On Thu, Feb 25, 2021 at 05:19:09PM +0100, Michael Sölch-Köhnke wrote:
> Hallo,
Hallo,
bin jetzt seit 3 Tagen dabei es hinzubekommen
.es läuft leider nicht.
PictBridge läuft auf der Kamera und auf dem Display steht USB-Verbindung
herstellen
Ich hoffe Ihr könnt mir einen Tipp oder Lösung geben
.Danke
Gruß
Michael
pi@raspberrypi:~ $ lsusb
Bus 002 Device 001
Thanks
From: Marcus Meissner
Sent: Tuesday, December 1, 2020 2:44 PM
To: susana saldaña
Cc: gphoto-devel@lists.sourceforge.net
Subject: Re: [gphoto-devel] gphoto2 output results for Fujifilm Finepix S1
On Tue, Dec 01, 2020 at 12:31:18PM +, susana saldaña
On Tue, Dec 01, 2020 at 12:31:18PM +, susana saldaña wrote:
> Dear Sirs,
>
> Just to send you feedback (report file enclosed) regarding the running of
> gphoto2 on linux with a Fujifilm Finepix S1 camera :
> https://www.fujifilm.ca/products/digital_cameras/s/finepix_s1/specifications/
>
>
Hi.
I'm using an Olympus XZ-1 camera.
I want to use this camera by connecting it to the Raspberry Pi. (Octoprint
Octolapse)
I am requesting support because gphoto2 is not available.
This camera has the following USB connection modes.
Storage, MTP, Easy Print, Custom Print, Charge.
Recognized only i
Ok, thanks for the reply.
ср, 2 сент. 2020 г. в 10:56, Marcus Meissner :
> On Tue, Sep 01, 2020 at 09:24:07PM +0300, Andrey Kozlov wrote:
> > Hello Gphoto2 team!
> >
> > I'm trying to make shots on my Olympus pen E-pm1 camera using Raspberry
> pi,
> > USB cable and gphoto2 software.
> >
> > someh
On Tue, Sep 01, 2020 at 09:24:07PM +0300, Andrey Kozlov wrote:
> Hello Gphoto2 team!
>
> I'm trying to make shots on my Olympus pen E-pm1 camera using Raspberry pi,
> USB cable and gphoto2 software.
>
> somehow "gphoto2 --auto-detect" detected my camera as Olympus mju 500 and
> it is not allowing
Hello Gphoto2 team!
I'm trying to make shots on my Olympus pen E-pm1 camera using Raspberry pi,
USB cable and gphoto2 software.
somehow "gphoto2 --auto-detect" detected my camera as Olympus mju 500 and
it is not allowing me to sent "gphoto2 --capture-image" command.
I tried to use other Olympus
Hi,
The NEX sadly does not support remote controlled capture :(
The summary shows only support for downloading images,
not even allowing deletion.
Ciao, Marcus
On Sun, May 17, 2020 at 04:39:45AM +1000, m kk wrote:
> Hi wonderful people of Gphoto2
>
> It would be my honour if you would help supp
Hi wonderful people of Gphoto2
It would be my honour if you would help support my piece of shit sony alpha
NEX5,
If not That is OK
I have included the data requested- and I am at your disposal
xoxo
Bus 001 Device 014: ID 054c:04a5 Sony Corp.
Bus 001 Device 004: ID 1d50:6029 OpenMoko, Inc.
Bus 0
Hi,
The --upload-meta-data is currently only used for MTP devices that support that,
e.g. MTP music players and Android phones.
gphoto2 --storage-info
will show for the Nikon things like:
[Storage 0]
label= [Slot 1]
basedir=/s
On Fri, May 15, 2020 at 11:40:48PM +0600, Nazmus Sakib wrote:
> Hello.
>
> I am quite new in gPhoto2 application. I am trying to upload an XMP file to
> the Camera by using below command:
>
> *gphoto2 --upload-file DSC_0001.xmp --folder /store_00010001/DCIM/100D5100*
>
> But I am getting error "
Hi Marcus. Well noted.
One more problem I am facing related with Live Streaming and I'll be glad
to have your advise.
I am using Live Streaming using below commands and view the stream on VLC
Player (Network Stream).
gphoto2 --set-config viewfinder=1
gphoto2 --capture-movie --stdout | ffmpeg -re
Thanks Marcus for reply. Understand it.
However, I actually wanted to log some Text/Tag information for a picture
taken by gPhoto. What is this "--upload-meta-data" option? Does it anyhow
helps my need? Also is it possible to write EXIF Tags in Camera Images
using gPhoto2 CLI?
Thanks again.
Rega
Hello.
I am quite new in gPhoto2 application. I am trying to upload an XMP file to
the Camera by using below command:
*gphoto2 --upload-file DSC_0001.xmp --folder /store_00010001/DCIM/100D5100*
But I am getting error "*PTP Access Denied*".
Can you please advise how to upload files to Camera Mem
Hi, I am using octoprint and have installed gphoto2 in order to use my Canon SX620 HS as my camera for octoprint, but when I connected it to my raspberry pi then enter the auto detect command this came up:Model Port--
Good morning, as prescribed I subscribed to GPhoto list, and am renewing my
help request.
I bought a Sony Alpha 5100 to use it as a webcam for streaming through a
LinuxMint pc.
After having installed all the recommended software, although Gphoto sees
the camera and correctly shows its abilities, st
Hi,
On Sun, Apr 19, 2020 at 08:31:50PM +0200, Nicolas Decan wrote:
> Hello
> I am sending you this message because I would like to use the gopro hero 3+
> for octolapse.
> I currently used a DSLR that works well.
> Gopro is recognized with "gphoto2 --auto-detect"
> But when I want to capture, the
HelloI am sending you this message because I would like to use the gopro hero 3+ for octolapse.I currently used a DSLR that works well.Gopro is recognized with "gphoto2 --auto-detect"But when I want to capture, there is an error: *** Error ***Sorry, your camera does not support generic captureERROR
Hi,
Is it possible to tell me if using trigger and download pictures from a fuji
X-T20 with a Raspberry with gPhoto2 is possible?
Caracteristics are here and in attachment:
Thanks
--LSUSB-
pi@raspberrypi:~ $ lsusb
Bus 001 Device 00
On Mon, Feb 17, 2020 at 10:02:27AM +, Nuno Pereira wrote:
> Hello,
>
> I am trying to control a Canon g9 X Mark II with gphoto2 but I have no
> success either from the terminal or using C++. I have updated gphoto2 to
> it's most recent version and I still can't use it with this camera. I am
>
Hello,
I am trying to control a Canon g9 X Mark II with gphoto2 but I have no
success either from the terminal or using C++. I have updated gphoto2 to
it's most recent version and I still can't use it with this camera. I am
able to detect the camera using --auto-detect and to get the summary of th
Hi,
Can you check if there are entries in /dev/bus/usb ?
Is the camera shown when you run "lsusb" ?
If not, its a system level issue, not a gphoto2 issue.
Your logfile so far indicated no issues on gphoto2 side.
Ciao, Marcus
___
Gphoto-devel mai
Support,
I installed Photo2 on Raspberry pi 4B running Buster.
lib and app compiled without errors after adding libcurl4-openssl-dev.
plugged usb into Canon T3i power on
ran gphoto2 --auto-detect no camera detected (attached to windows 10 pc
camera detected as storage device cable good)
attached pl
Hi,
Sadly the Panasonic DMC-TZ series does not allow remote control over USB,
this is a camera limitation :/
Ciao, Marcus
On Tue, Dec 17, 2019 at 04:34:27PM +0100, Julian wrote:
> Hi there,
>
> I found this great project in the internet. Unfortunately my camera
> (Panasonic DMC-TZ71) is not supp
Hi there,
I found this great project in the internet. Unfortunately my camera
(Panasonic DMC-TZ71) is not supported. I followed the instructions to
generate more informations (see attachment).
This camera uses PictBridge, but the summary-document says "No Image
Capture".
I hope you can add supp
Hi,
Can there camera set to other USB modes on camera?
Can you run a
gphoto2 --summary --debug --debug-logfile=summary.log
and mail summary.log?
Ciao, Marcus
On Fri, Oct 04, 2019 at 09:41:22PM -0400, Daniel Queen wrote:
> lsusb output:
> ID 04cb:02d6 Fuji Photo Film Co., Ltd
>
> The summary
lsusb output:
ID 04cb:02d6 Fuji Photo Film Co., Ltd
The summary and config files are attached. Unfortunately, gphoto was
unable to capture an image.
** Error ***
Sorry, your camera does not support generic capture
ERROR: Could not capture image.
ERROR: Could not capture.
*** Error (-6: 'Unsuppor
Hello gphoto Team !
First of all thank you for the dev and support for gphoto2 :)
I wanted to report the Olympus E-M10II not yet supported camera.
The camera offers 3 usb mode : Storage; MTP; Print.
You will find enclosed the recorded outputs as requested in the
documentation for MTP and Print m
Hi,
The camera USB device is not even seen in "lsusb", so something else is missing
in a lower level, like hardware or kernel.
Is the cable OK? Any errors in "dmesg"?
Ciao, Marcus
On Tue, Aug 13, 2019 at 12:47:36PM +0200, Roland Förg wrote:
> Hello,
>
> I want to report a not yet supported ca
Hello,
I want to report a not yet supported camera --> CANON EOS 250D
See the output after running the commands below.
Thanks for doing such great code!
Roland
*pi@octopi:~ $ lsusb*
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
*pi@octopi:~ $ gphoto2 --auto-detect*
Model
ut this kind of Windows stuff :/
Perhaps someone else can help?
Ciao, Marcus
> -Original Message-
> From: Marcus Meissner
> Sent: April 27, 2019 6:34 AM
> To: Marek Sliwa
> Cc: gphoto-devel@lists.sourceforge.net
> Subject: Re: [gphoto-devel] gphoto2/libgphoto2 on Windo
devel@lists.sourceforge.net
Subject: Re: [gphoto-devel] gphoto2/libgphoto2 on Windows IoT Core (or Desktop
UWP app) Error : 'Out of memory' (-3)
On Sat, Apr 27, 2019 at 03:43:36AM +, Marek Sliwa wrote:
> Running gphoto2 mingw 64 bit binaries on Windows IoT Core and it is unable to
> detect or
On Sat, Apr 27, 2019 at 03:43:36AM +, Marek Sliwa wrote:
> Running gphoto2 mingw 64 bit binaries on Windows IoT Core and it is unable to
> detect or load the usb library. Reproduce using : gphoto2.exe --debug
> --debug-logfile=my-logfile.txt --auto-detect --summary
>
> The same binaries on d
Running gphoto2 mingw 64 bit binaries on Windows IoT Core and it is unable to
detect or load the usb library. Reproduce using : gphoto2.exe --debug
--debug-logfile=my-logfile.txt --auto-detect --summary
The same binaries on desktop Windows 10 work just fine. However on Windows 10
desktop this e
On Thu, Oct 25, 2018 at 03:40:49PM +0800, Tiffany K. wrote:
> Good day,
>
> I bought a camera - Canon Powershot G3 X recently to build a project using
> gphoto2. However, I have realised that it is not supported even though it was
> included in your gphoto2 list of supported camera
> (http://gp
Good day,I bought a camera - Canon Powershot G3 X recently to build a project using gphoto2. However, I have realised that it is not supported even though it was included in your gphoto2 list of supported camera (http://gphoto.org/proj/libgphoto2/support.php). I have attached the output of some gph
Hello developer of gphoto2
I am using the gphoto2 on the raspberry pi3 b+ to control my camera the
Canon EOS M5 which is on of the support camera in the list I had tried
every solution for example, update the gphoto2,libgphoto2
but the error cannot be solve
--
Hi,
i'm finding a camera that can be connect to pc linux for start/stop video
recorder, shot photo, set major parameters and download files
Can show me the best cameras from this list?
http://www.gphoto.org/doc/remote/
Thanks
-
Hi, I'm using the software, but I'm having problems running, I attach a copy of
what happens to me, do you have any solution?
Debian linux operating system on Raspberry latest release.
Hello.
Giorgio
--
Check out the vib
Hi,
Die EOS 100D wird unterstuetzt, ich hab auch persoenlich eine getestet.
Die remote Liste ist nicht voll up to date.
Ciao, Marcus
On Tue, Jan 23, 2018 at 08:42:08AM +, Yildirim, Taner wrote:
> Sehr geehrter Herr Meissner,
>
> vorerst will ich mich für Ihre ganze Mühe recht herzlich bedan
Sehr geehrter Herr Meissner,
vorerst will ich mich für Ihre ganze Mühe recht herzlich bedanken. Dieses
Projekt klingt sehr vielversprechend. Ich versuche mein Timelapse System von PC
auf Raspberry umzustellen, dies ist nur möglich anhand Ihrer zur Verfügung
gestellten Software. Die ersten Tests
On gphoto2-2.5.15 version of Canon 5DS and 5DS R using gphoto2 --get-files =
filename get camera photos, the camera screen will flash--
Check out the vibrant tech community on one of the world's most
engaging tech sites,
On gphoto2-2.5.15 version of Canon 5DS and 5DS R using gphoto2 --get-files =
filename get camera photos, the camera screen will flash--
Check out the vibrant tech community on one of the world's most
engaging tech sites,
On Fri, Nov 03, 2017 at 11:25:14AM -0700, mechrekt wrote:
> Hi, did the camera worked with gphoto2 ?
In generally the Powershots are able to download images.
Remote capture is only in old Powershots, and Canon EOS.
So this SX will not be able to do remote capture.
(There is the CHDK 3rd party a
Hi, did the camera worked with gphoto2 ?
thank you
--
Sent from: http://gphoto-software.10949.n7.nabble.com/gphoto-devel-f4316.html
--
Check out the vibrant tech community on one of the world's most
engaging tech sites
Hello,
I am working with Canon EOS SL2 cameras and I want to capture full HD video
to the sdcard. Canon EOS utility supports it but libgphoto2 doesn't.
libgphoto2 doesn't put the camera in video mode too. Can you tell on where
to look for changing camera mode to video mode? I tried looking into ca
Bob,
This behaviour is normal for a Nikon.
I use a D800E, also reported as a "USB PTP Class Camera”, and everything seems
to work.
You can change the storage location with this command:
$ gphoto2 --set-config capturetarget=1
Rod
--
> On Jun12, 2017, at 18:39, b...@360degreeviews.com wrot
Hi,
Can you also report the USB id? Run "lsusb"
The camera functionality should already just work, as we support the Nikon as a
class of cameras.
The captured images is by default transfered via SDRAM directly to the
computer, adjust the
"capturetarget" configuration to switch to a SD Card sto
Hello,
I recently purchased a Nikon D500 and was surprised to see a lack of support
with gphoto2. If no one has requested support, I would like to do so and have
attached the following files:
detect.txt: results from running gphoto2 --auto-detect
summary.txt: results from running gphoto2 --
On Wed, Jun 07, 2017 at 11:25:45AM +0200, Orange Pi Web wrote:
> Hi. I am facing a problem with gphoto2 and a Nikon D70s (and a Nikon D700
> too). My problem is that i only can take pictures at 160x120. I am using
> this command line:
>
> /*gphoto2 --capture-image-and-download --filename "%Y%m%d%
Hi. I am facing a problem with gphoto2 and a Nikon D70s (and a Nikon
D700 too). My problem is that i only can take pictures at 160x120. I am
using this command line:
/*gphoto2 --capture-image-and-download --filename "%Y%m%d%H%M%S.nef"*/
And some variations like "*/--get-config imagesize/*", "
Maria,
On 31/03/17 10:20 AM, Maria João Sousa wrote:
> I have a FLIR Vue Pro 336 and I am working on developing a real-time
> application that uses thermal images. However, the camera does can
> not transmit files in real-time, since it stops being recognized by
> the PC as a Mass Storage as soon
Hi,
Is there software that remote controls the device on Windows?
Can you post "lsusb" output in the capture mode (when it switches out of USB
Mass Storage mode)?
Basically the protocol would need to be implemented if the device supports it.
Ciao, Marcus
On Fri, Mar 31, 2017 at 03:20:30PM +010
Hi,
I have a FLIR Vue Pro 336 and I am working on developing a real-time
application that uses thermal images. However, the camera does can not transmit
files in real-time, since it stops being recognized by the PC as a Mass Storage
as soon as I put it in capture mode.
After reading the gPhot
Hi,
It is weird, the other commands do not seem to see the camera. Is it switched
on at that time?
Note that remote capture over USB is not supported in the current Powershot
firmware.
Ciao, Marcus
On Tue, Feb 07, 2017 at 10:43:46PM +0100, Hans Lugmeier wrote:
> Dear Ladies and Gentleman from G
Dear Ladies and Gentleman from GPHOTO2,
In your list of supported cameras I found "Canon PowerShot SX150 IS".
Auto-Detect works, all other commands not. Attached you find the records.
At file "linux.txt" you find some info about used system.
Muchas Gracias,
Hans Lugmeier
For debugging messages,
Hi Marcus,
I am currently working on a project where I need to utilize continuous
capture from our camera, which is a Powershot G10. We have confirmed that
gphoto2 is working with it, but we are having difficulty utilizing the
camera's continuous shooting feature. Specifically, the camera supports
87 matches
Mail list logo
