300
len.sa...@gdit.com
URL: www.gdit.com
Customer Focused, Value Driven, Delivery Obsessed
From: IBM Mainframe Discussion List on behalf of
Cieri, Anthony <02d7f4ec1fff-dmarc-requ...@listserv.ua.edu>
Sent: Thursday, May 23, 2024 12:45
Len,
Check out the following manual; IBM Connect:Direct for z/OSVersion
6.1.
On page 653 is an example of the Batch Compression utility (DGASACMP).
You can run this and then transfer the file
Good Luck
Tony
-Original
This might get you started
This is the PROCESS
This PROCESS takes a catalogued dataset from the Sending node and
transmits it to a new dataset on the receiving nodes. It also uses extended
compression!!!
COPYDSN PROCESS SNODE=
Did you check the value of REXXSTRF in the netview defaults???
Try a LIST DEFAULTS command in Netview and be sure that the values for
REXXSTRF is ENABLE
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Jack Zukt
Sent: Monday, December 19, 2022
eplacement.
(*) it is not honest/dishonest, it is about trust. I trust NO ONE, when
analysing IT problems. No one, including me. Nobody's perfect, it is possible
to miss some detail. :-)
--
Radoslaw Skorupka
Lodz, Poland
W dniu 13.08.2022 o 03:50, Cieri, Anthony pisze:
> Thanks for your reply.
t with remote access* to the local HMC is
rather rare. In other words: vast majority of features is available though
remote access.
Last, but not least: remote access to local HMC is much easier to set up.
HTH
--
Radoslaw Skorupka
Lodz, Poland
W dniu 11.08.2022 o 17:57, Cieri, Anthony pisze:
>
Hi List,
I have a new DR machine (BC15) that we have installed in Austin. The
machine is running and we tested out a DR scenario when we were there. At that
time , we did NOT have our remote HMC installed. A few week later we are now
installing our remote HMC and we are
Hi,
I think there is a job that is provided in SYS1.SAMPLIB as member
ATBTPVSM
Tony
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
(K.K.Paradox)T.Kobayashi
Sent: Wednesday, September 15, 2021 5:11 AM
To: IBM-MAIN@LISTSERV.UA.EDU
TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
On 5/5/2021 12:58 PM, Cieri, Anthony wrote:
> Dave,
> Here you go:
>
> ##
> # #
> # Secu
Dave,
Here you go:
##
# #
# Secure FTP Application #
#
Well, for what it's worth, I just tried it and my job was successful,
however, I also received the SSLv23/TLSv1 messages. So I used the standard job
that IBM provided (RFNJOBS) and I turned on Debug SEC. Here is what I got:
220 dhebpcb01 secure FTP server ready.
You could try something like this:
IF (LABEL:IEF455D) MSGID = 'IEF455D' & TEXT(1) = REPLYID .
& (TEXT = .'SP5145'. | TEXT = .'SP5146'. | TEXT = .'SP5147'. | TEXT =
.'SP5149'.)
THEN EXEC(CMD('MVS REPLY ' REPLYID ',NO')
Try it without the '-'. I.E. //FTPS PROC MODULE='FTPD',PARMS='Port
9921'
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Roberto Halais
Sent: Tuesday, September 08, 2020 10:48 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: New listening port for ftp
[[
is Ave, SE | MD RSCB2H | Grand Rapids, MI
49546
616.653.8429 | fax: 616.653.2717
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Cieri, Anthony
Sent: Wednesday, May 20, 2020 1:02 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: REXX assistance
**CAUTION EXTERNAL EMA
In this instance the IDCAMS command represents a NETVIEW command:
CMDDEF.IDCAMS.MOD=DSIDCAMS
CMDDEF.IDCAMS.FOLDUP=Y
DISPMOD DSIDCAMS
CNM263I MODULE LENGTH CSECTDATE PTF EPA AM ATTR
CNM263I DSIDCAMS 000570 DSIDCAMS
I believe that zOS V2R2 is the last OS that will support SMTP. Starting
with zOS V2R3, CSSMTP is required.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Charles Mills
Sent: Sunday, May 17, 2020 11:19 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re:
I should have specified that you need to be at zOS V2.3 or
above.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Cieri, Anthony
Sent: Friday, April 17, 2020 2:01 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2 parm change - how make sure it's
(1) Is this what you are looking for..(JES2 Initialization
Dataset Checker)
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.hasa300/dscheck.htm
(2) It does depend on the error. In my experience with changing
JES2 init
senders. *** ]]
Hey Tony,
What signal interference ? Does the AC1750 filter signal interference ?
Scott
On Fri, Apr 3, 2020 at 12:32 PM Cieri, Anthony <
02d7f4ec1fff-dmarc-requ...@listserv.ua.edu> wrote:
>
> There are lots of potential solutions.
> If yo
There are lots of potential solutions.
If your smart TV has an Ethernet port and you have an easy way to run
some Ethernet cables, that would provide a better (and probably cheaper)
solution.
If not, there are Wifi signal boosters that can be purchased at more
modest
Correction:
The main Netview "parm" member is CNMSTYLE (Netview Style sheet) and it
is located in a dataset in the DSIPARM concatenation.
Sorry about the "fat fingers"!
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
The main Netview "parm" member is CNMSTYLE (Netview Style sheet) and it
is located in a dataset in the DSIARPM concatenation. The standard user
configurable member is CNMSTUSR. In this member you could code AuxInitCmd
commands that Netview will execute at initialization time:
Comments
There are also a few MPF exits on the CBT site that may be worth a
look; MPFEXITS, MPF$NTFY, MPFXTALL etc...
These can certainly be used to replicate some of the OPS functions!!
Hth
Tony
-Original Message-
From: IBM Mainframe Discussion List On Behalf
There is a member in SYS1.SAMPLIB named GIMSAMPU, that provides JCL to
allocate a new CSI.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Jousma, David
Sent: Tuesday, January 28, 2020 11:39 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Connect upgrade
Weather this is possible may depend upon the level of Java that you are
using.
I use FireFox to connect to the HMC for an older z10 machine. I also
keep a Java Version 7 installed specifically for the Integrated 3270 Console
function. I have colleagues here with similar PC
I think there is a REALNAME program on the CBT site (file 929). I have
not used it , but it might be f some help...
Hth
Tony
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of John McKown
Sent: Thursday,
Dave,
This does not answer your question, but it appears from the error
messages that you are still running the older zOS SMTP task. ZOS Communication
Server now provides a new CSSMTP task, which no longer copies the spool files
to sequential dataset and plays the dataset
AST > TCASUMAX using Rexx storage calls
(via NetView) yields a null value.
The old doc mentioned TCAST was located in "System common area", but
perhaps it moved to private?
Anyway, I appreciate the help!
On Mon, Jul 8, 2019 at 3:56 PM Cieri, Anthony wrote:
>
> Are you look
Are you looking to set the usermax to an appropriate value via
automation, or simply trying to determine the current value??
In the CVT there is a pointer to the TCAST, CVTTCASP is at offset 1012
(x'3F4') in the CVT.
I believe that TCASUMAX is a 2 byte field at offset
How about the GIMXSID utility???
I believe that SMP/E provides sample JCL to execute GIMXSID to produce
a consolidated inventory report to be used with ShopZ ordering. This is
basically a list of FMIDs and features.
-Original Message-
From: IBM
This won't help unless you are running IBM System Automation (SA). I
believe that IBM SA can be configured to "trap" messages written to JESSYSMSG.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of John McKown
Sent: Tuesday,
If "in the DMZ" means behind a firewall, then it is possible that the
firewall has an "inactivity" time out values of its own!!
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Roland Kinsman
Sent: Thursday, May 16, 2019
Tony Thigpen
Cieri, Anthony wrote on 5/14/19 5:50 PM:
> Under the OAS column of your D A,L display there is still one task.
>
> Was a $P JES2 command ever issued. Usually, when we are at this point
> in a DR environment and the $P JES2 command is issued, JES2 may t
Under the OAS column of your D A,L display there is still one task.
Was a $P JES2 command ever issued. Usually, when we are at this point
in a DR environment and the $P JES2 command is issued, JES2 may tell you what
is still active if the stop command fails.
Here are
I have some sample JCL in the TPX install library:
Highlvl.qual.CB0VSRC(ASMUXIT)
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Peter
Sent: Thursday, May 02, 2019 2:27 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject:
If the user is NOT defined in UADS then don't you need to define a TSO
segment in TSS???
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of ITschak Mugzach
Sent: Wednesday, April 17, 2019 1:51 PM
To: IBM-MAIN@LISTSERV.UA.EDU
I certainly agree with the move to User logs.
However, in the interim, there is a Broadcast Manager "package" on the
CBT site (File 247) that may be of some help. If nothing else, there is a
process documented for "expanding" the broadcast dataset.
Hth
Tony
Peter,
Is this something you would consider sharing with a larger audience???
I know that we routinely change LPAR weighs at our shop, but we use a
manual process.
Thanks
Tony
-Original Message-
From: IBM Mainframe Discussion List
I assume that you are doing some type of certificate exchange to
support FTPS. If so, where are the certificates stored? In a SAF product in
ICSF? Crypto hardware could have changed!!
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
IPLINFO ??
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Carmen Vitullo
Sent: Tuesday, March 05, 2019 3:59 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMF/RMF records for 4hr rolling average MSU?
[[ SEI WARNING *** This
IAZ0545I NETSRV1 Error encountered in function connect() - EDC8128I
Connection refused.
IAZ0543I NETSRV1 TCP/IP connection with IP Addr: 10.100.5.73 Port: 175
ended due to TCP/IP error, rc: 1128
The "connection refused" error can indicate a lack of resources on the
SETOMVS MAXUIDS=2000
No comma after SETOMVS!!!
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of McCabe, Ron
Sent: Thursday, January 31, 2019 5:03 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: BPXPRM00 parmlib
[[ SEI
I believe that it is the Secure+ feature for Connect:Direct that
exploits the Crypto hardware. If you are NOT using seure+, then I believe that
there is no "requirement" for ICSF.
However, I also believed that even if secure+ WERE enabled and you
attempted a process to a
The last time I applied maintenance to a CA product, I believe that there was a
way to order all of the fixes that you wanted and get them in a .zip files. The
filename was something like scart0.zip. I was able to download this file from
the CA site and then upload it to z/OS in a USS file.
Is Rexx suitable. Perhaps LISTDSI can help
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Kirk Wolf
Sent: Tuesday, December 04, 2018 2:36 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Examples of roll your own "LIKE()"
U] On Behalf
Of Cieri, Anthony
Sent: Friday, November 30, 2018 2:07 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IRXANCHR REXX environment value recommendation
Since I did not notice any responses, I thought I would offer my 2
cents.
We are NOT running z/OS 2.3 yet, but I did h
Since I did not notice any responses, I thought I would offer my 2
cents.
We are NOT running z/OS 2.3 yet, but I did have the need to increase
this value a few years ago. The need was predicated on the installation of
Tivoli System Automation (TSA). TSA is based upon
There is a sample z/OS FTP client user exit in TCPIP.SEZAINST(EZAFCEXT).
In this sample exit, there are two "in-stream" macros called ABCINIT
and ABCTERM. The ABCINIT macro supports setting multiple base registers.
Hth
Tony
-Original Message-
From: IBM
There was also an email from Ed Jaffe on 08/23/2018 to this list that
contained links to several St. Louis SHARE presentations that he was a part of.
The Bit Bucket x'38' presentation discusses this subject and provides several
alternatives!!
-Original Message-
From: IBM
Do you receive the same error messages if you start the connection
manually??
$S N,A=APPL01
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Gilson Cesar de Oliveira
Sent: Tuesday, August 28, 2018 9:15 AM
To:
if
you frequently see IEF093I messages.
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of
> Cieri, Anthony
> Sent: Tuesday, August 07, 2018 12:59 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Jes2 Initiator number
>
>
> For this
Many thanks for this suggestion.
I have found a copy of IEFU84/MXGU84 in our MXG.SOURCLIB. This should
solve the audit trail issue.
Thanks again.
Tony
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
For this particular exercise/issue I do not need to consider WLM Inits.
Initially, I would like to be able to produce a list of jobs that ran
in a particular JES2 initiator.
We occasionally have an issue with S822 abends. They don't occur very
often, but when they do,
Very true. Although I do have it running under zOS V2.2 at our site.
The only TASID issue for our 2.2 upgrade was Option #4 (Initiator
Status List). The error messages were "Unsupported Level" and after pressing
PF1, 'TASID could not find the PIT control block'.
A
INQUIRE maybe??
https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm.zos.v2r1.istprg0/inqlu.htm
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Charles Mills
Sent: Monday, July 16, 2018 6:20
wrong.
On Tue, Jun 12, 2018 at 7:54 PM, Cieri, Anthony wrote:
>
> Hello Saurabh,
>
> I can hopefully offer a few points of clarification. I think
> that the IGD104I messages are generally only written to the joblog.
> Connect:Direct uses dynamic allo
Hello Saurabh,
I can hopefully offer a few points of clarification. I think that the
IGD104I messages are generally only written to the joblog. Connect:Direct uses
dynamic allocation for all processes.
The SVTM052I message IS written to syslog and can be automated if
There is a SMPE program, GIMXSID that can be used to provide a CSI
report. I found the JCL on one of the Shop/z help screens, it is something
similar to the following:
//STEP1EXEC PGM=GIMXSID,PARM='WAIT=10MIN,L=ENU'
//SYSPRINT DD SYSOUT=*
Please pardon me for jumping in, but FWIW:
In our environment (zOS V2.2) we start HWIBCPII before JES2 after an
IPL. One of the first messages that BCPII issued is:
HWI015I BCPII IS WAITING FOR THE PRIMARY SUBSYSTEM TO BECOME
ACTIVE TO ALLOW THE BCPII
We don't use RACF here, so my knowledge there is very limited, but I
have a few suggestions!!
First, the is a Netview group under Yahoo Groups, you may find more
Netview types there.
There are several errors below. The DSI148I and DSI417I errors lead me
to
Connect:Direct also has the ability to submit jobs via the RUNJOB verb.
Since the files appear to be received by Connect:Direct, wouldn't it be
possible to change the receiving process to submit the job too.
-Original Message-
From: IBM Mainframe Discussion List
It is not an API, but this is something that was discussed here
previously..
/* Rexx */
CVT = C2d(Storage(10,4))
CVTDFA = C2d(Storage(D2x(CVT +
Hi Lou,
I am assuming that you mean the full screen TSO panel that prompts you
for your credentials, accounting information and other logon options. If that
IS the case, that is the default TSO logon environment unless you have an exit
(IKJEFLD1) or other modification to
There is also a lpinfo.txt file on http://www.mzelden.com/mvsutil.html
This rexx specifically deals with APF, LPA and Linklist datasets.
Additionally, there are some rexx exec in file 221 of the CBT tape that
might be of interest!!!
-Original Message-
From:
While I do not know of a specific batch job that can produce this list,
there is a "compromise" method as opposed to "ENTERing" each node for the
specific details. In the Secure+ ADMIN tool, there is an option to produce a
report. This report can be saved (cut/pasted) into a separate
I think that the entry in the default IBM logmode table (ISTINCLM) is
D4B32XX3
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Edward Finnell
Sent: Tuesday, March 13, 2018 10:26 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re:
You stated that: We are not sure when this stopped working but we did
upgrade from R15 to R16 of TSS several weeks ago.
Are you sure that the "indirect" path DID work at one time???
If so, this most likely does NOT apply.
If the "indirect" path has never
communication z/OS 2.2 and z/OS 1.4
Tony,
Based upon the note in the 1.10 migration, it would seem to indicate that using
z/OS 2.2 EE to communicate with a z/OS 1.4 system would be inadvisable? Or
just inadvisable without the ATCSTRxx HPRSESLM=DISABLED?
Rob Schramm
On Thu, Mar 8, 2018 at 3:16 PM Cieri
I did some more digging and it appears that the HPRSESLM VTAM start
option that I referred to earlier was introduced in z/OS V1.10. We are a
service Bureau shop and I recall having some issues when we upgraded from z/OS
V1.9 to V1.11. Those scars are what lead to my first reply!!! I
You might get more feedback using the listserver ibmtc...@vm.marist.edu
More Communication Server folks hang out there
For my 2 cent...I am going strictly by memory here...
I believe that more of the changes in Comm. Server (VTAM) between
There are some configuration mis-matches that could cause the Autologon
to fail. As already mentioned, an incorrect LUNAME could cause this, also an
incorrect password (if you are using them). I recall some vendor type RJE
device that never successfully signed on with the JES2
Please pardon the interruption for a brief comment.
In case it is not completely obvious, the Digicert acquisition of the
Geotrust CA also affects Verisign certificates. We have already encountered
this issue (last week) with another business partner that used a certificate
LRS also provides several PCMD keywords that can reduce the need
for multiple definitions for the "same" printer. These keywords provide various
methods of "injecting" printer commands to control pagination, duplex, fonts
etc. For example:
PCMDSTRT=(FPS13266,FPS13266,),
On Behalf Of Cieri, Anthony
> Sent: Wednesday, November 01, 2017 1:44 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Moving from NJE over ESCON CTC to IP
>
> Is the new IP path traversing any Firewalls???
>
> If so, Port 175 will need to be opened between the end po
TCP
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> On Behalf Of Cieri, Anthony
> Sent: Wednesday, November 01, 2017 1:15 PM
&g
Dave,
My first thought would be to check for some "available" UNIT=TCP Jes2
lines.
Hth
Tony
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Gibney, Dave
Sent: Wednesday, November 01, 2017 3:51 PM
Hi Lizette,
I don't have a rexx handy, but you can simple use the ls and grep
commands that you mentioned. For example:
ls -R | grep '.*.tar'
this would list all file from the current directory (and
subdirectories) that contain the characters 'tar' . The
Are you accommodating for the different SYSNAMEs that you are
processing (LPARs) :
QUEUE " SYSNAME ESA1"
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Barkow, Eileen
Sent: Monday, September 18, 2017 2:30 PM
To:
I believe that this is possible by associating the "modified" line with
the particular NJE node.
We do something like the following:
Code the desired LINE parameters in the JES2 Initialization Parameters:
LINE(xx)JRNUM=1,JTNUM=1,SRNUM=1,STNUM=1,UNIT=SNA
If you are transferring a PDS from one MVS LPAR to another and creating
the target PDS, couldn't you use:
mvsput 'FTP.V8050.MVS.BUILDJCL' 'DRP.V8050.MVS.BUILDJCL.NEW'
(REAllocate
-Original Message-
From: IBM Mainframe Discussion List
The extended status (the D in the tenth position) means that this
resource was added or moved using Dynamic Reconfiguration.
If the VTAM resource was built dynamically, it is possible that the
analogous resource on the as/400 was NOT started.
One other thought is that
It is certainly possible with one TCP/IP stack.We do it!!!
However, we do use two separate FTP tasks, one is secure (FTPS) and one
is NOT (FTPD). You could then code a FTCHKIP exit for the non-secure FTP task
to only allow login from the hipersocket address range.
Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Cieri, Anthony
Sent: 22 August 2017 20:47
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SPF Panels for TCP/IP (was HSM Query command)
This mail originated from outside our organisation - aci...@seic.com
Sorry for the segue
Sorry for the segue into a new thread, but.
There is a SPF Utility that basically provides a full screen ISPF
interface to the NETSTAT command. It can be found at the following url:
http://www-01.ibm.com/support/docview.wss?uid=swg24029203
It is called the
We do not use RACF as our ESM, but year ago, I recall having to give
OPER authority under the TSO ACCOUNT command in order for users to issue the
TSO CONSOLE command.
Perhaps one of your users has this and one does NOT.
-Original Message-
From: IBM Mainframe
In a previous life, we used a vendor product called FTPALERT. It was
marketed by William Data Systems. They are now Syncsort and the product is Zen
FTP Monitor. This product operates by providing (or replacing) the standard FTP
exits; including FTPOSTPR. The product provided a GUI
Great minds must think alike
After seeing this recently in a thread here, I decided to download B2H
and try it.
I initially received the exact same error you have listed below. To get
past this issue, I changed the default MVS Dataset Allocations (search on
z/OS FTP client and Server support a parameter called CONDDISP. Perhaps
this might help.
If CONDDISP were coded as DELETE, then a partial file transfer should
not be saved!!
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
There was a similar discussion on the List back in January of this
year, where someone provided a nice Rexx exec that issued operator commands via
the SDSF Rexx API. The Rexx was called OPERCMDB and was executed via JCL. This
would allow you to "authorize" only those who need it,
If you just want to remove the messages from the console, then I think
MPF would work!!
An entry like:
CKDCISLC,SUP(YES) /* Suppress message from console */
The '+' sign should not be necessary! This won't remove the messages
from the job
In member IKJTSOxx
Under the SEND Parnlib parameter
Check for either:
LOGNAME(SYS1.BRODCAST)
- or-
LOGNAME(user log data set name)
-Original Message-
From: IBM Mainframe Discussion List
We use CA-TPX in conjunction with the IEFUTL exit to address this
issue. CA-TPX provide the "screen lock" requiring the user to re-authenticate
and the IEFUTL exit cancels the user after approximately twice the "screen
lock" time interval.
Also, we use CA-TSS (Top Secret) as
t; To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: NJE between two different NETIDs
>
> Which manual has the instructions for setting up NJE in JES2? Looks
> like I will be going through a similar exercise at some point in the near
> future?
> Bill J.
>
>
>
>
> On
It is possible to add all three definitions (APPL, DESTID and CONNECT)
dynamically via the $ADD JES2 command.
You will also need to define the remote site as a NODE to JES2. If you have a
node definition available, you can use the $T command to change the NODE
parameters to your desired
Product: Attachmate Extra X-treme 9.3
- Can select screen text and copy to clipboard: yes ( /
)
- Has function to save screen as a text file:yes (File / Print
Screen, then select file radio button under Destination)
-Original Message-
It has been awhile since I tried this, but as I recall, there are a
couple of task that needed to be done in the gskkyman utility
1) Set your self signed certificate to TRUST status
2) Make your self signed certificate the Default cert for the key
database
You could try DFDSS Dump and restore. In two separate jobs, you can
increase the file allocation on the DFDSS dump and them rename the files on the
DFDSS restore!!
Hth
Tony
-Original Message-
From: IBM Mainframe Discussion List
I have used TPX for years, since it was first marketed by Duquesne!! (It
has since been acquired by Legent and then by CA.)
I believe that MacKinney still markets a product called VTAM/Switch.
From: IBM Mainframe Discussion List
It may not be your ACS routines.
I can reproduce this behavior on a "test" LPAR when allocating a PDSE
in ISPF 3.2 with RECFM=U. I get the warning message to either DELETE or KEEP
the dataset. If I keep it, I can't copy Load modules or program objects into
then newly created
There are (2) Rexx execs located on file 220 of the CBTtape.org web
site (V492) (http://www.cbttape.org/
They are LISTSVCJ and LISTSVCT. These execs will list the SVC Update
Journal table and the all of the active SVCs respectively.
HTH
Tony
-Original
1 - 100 of 112 matches
Mail list logo