applications.
snip
- Support is provided to allow jobs for which journaling is used to be
stopped after a currently running step has finished and held for restart
in the following step. This is intended to allow less-disruptive system
shutdowns.
--
John Eells
z/OS Technical Marketing
IBM
for restart
in the following step. This is intended to allow less-disruptive system
shutdowns.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
thought it may be a problem unique to SORT
(SyncSort) but even the Control-R step (as well as non-sort steps in other jobs) is 30x
higher.
snip
A shot in the dark: Do you have the same data sets in the parmlib
concatenation for both R11 and R13?
--
John Eells
z/OS Technical Marketing
IBM
?
snip
I believe the current recommendations are here:
http://www-03.ibm.com/systems/z/os/zos/support/servicetest/
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff
are intended to help you decide how
long to wait before installing them. (As usual, no detail about the
exposures themselves is provided.)
z/OS customers can get more details, and register, here:
http://www.vm.ibm.com/security/aparinfo.html
--
John Eells
z/OS Technical Marketing
IBM
or lower,
you'll have to keep new jobs from starting while you delete and add the
exit if you can't have them start without an active IEFUSI.
See topic 4.46.3, Updating Dynamic Exits, in z/OS R12 or R13 MVS System
Commands.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee
, and SCEERUN2, and then set a *bunch* of _C89_* variables
(if you are using the c89 command), or _CXX* variables (if you are running
the cxx command), etc.
snip
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
to the June, 2013 release date?
snip
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
recall correctly, TSO and later TSO/E have been either:
a) Different products with separate product (order) numbers
b) For TSO/E, an element of OS/390 or z/OS.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
the third reason will be overcome
by the simplification aspects of managing a small number of large
volumes rather than the other way 'round, but time will tell.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
Roberts, John J wrote:
John Eells wrote:
Actually, z/OS has supported 1TB drives (EAVs) on DS8Ks since z/OS R10, which went out of
service last year. In R10 we supported VSAM, in R11 we added Extended Format sequential,
and in R12 (the oldest release now in service) we added support
/BOOKS/GIMMCD42/CCONTENTS?SHELF=ez2zo111DN=GA22-7770-15DT=20100603122849
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
are the
pessimists, for they have made backups.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
some of the work will be zIIP or zAAP
eligible. I haven't got that information handy at the moment.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive
dial-up time service (CTD).
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
in part on what
CF response times you find acceptable. The inherent propagation delays
of ~1ns/foot have to be considered when you are looking at this.
GDPS plays in this space as well but I don't have the details handy.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
not be
redefined when the catalog is reallocated, and prevent new catalog
entries using those aliases from being defined until the new catalog is
available. This is intended to simplify the reallocation of user catalogs.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
://www.ibm.com/systems/z/os/zos/bkserv/v2r1pdf/
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
more pronounced than the one above, and it's the
one I had always heard people talk about (up until today, that is).
You learn something new every day...
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
John Eells wrote:
There is indeed a machine-level curve that reduces the capacity of the
overall machine when an engine is added (or activated) to a CEC.
Oops; I should have written:
There is indeed a machine-level curve that reduces the capacity of
*other processors within* the overall
do that,
it seems quite possible you will never have to run a reorg again...and
should run out of space less often, I'd think.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe
John Norgauer wrote:
After a long weekend with NO system changes(that I know of) when I issue
D T, nothing else appears on the console.
Any thoughts please.
snip
Does it show up in SYSLOG/OPERLOG?
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
with the message: INFO IBM-MAIN
...which is different.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
actually use CCWs...
--
John Eells
IBM Poughkeepsie
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
are *especially* interested in
people who would answer yes to #2.
(If people are interested in the answers I'll roll them up and post them
mid-week next week.)
Thanks!
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
DASDBILL2 wrote:
Is this real or is it a Friday post a day early? Someone whose surname is Fatzinger
posting on the topic of a Fat finger?
I can assure you that it's really Peter's last name.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
) of the parts of another product during installation.
Deleting such a product will remove those parts, and can leave stuff
behind that no longer works.
(Sorry, I have no idea whether BDT has any VERSION statements.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
)
VERSION(*) RELEASE(*) MOD(*)
STATE(DISABLED) == TO THIS!!
Good catch, Ed. I'd forgotten BDT was part of z/OS (blush).
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
DFSMRCL0 in RESLIB.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM
all of the old things disregarded, LCDS is a very nice language.
This all depends on how the data is blocked coming down the wire.
XEROX Manual can be viewed here.
http://download.support.xerox.com/pub/docs/DocuPrint_100_100MX/userdocs/any-os/en/00PDLGd_701P47156.pdf
--
John Eells
z/OS
view, but choosing not to change the format of catalog
entries to expand the volume serial field to 8 characters and allow it
to exceed 6 only when the characters matched the syntax of a system symbol.
But, right or wrong, that's how it happened...
--
John Eells
z/OS Technical Marketing
IBM
memory latency is more like 950
cycles on current processors.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
. (Both have been around a Long
Time.) There's a not-so-new health check for AIM stage 3, that was
added for z/OS R12 with UA64936 and for z/OS R13 with UA64937 in April
2012, and a related check to see whether UIDs will be automatically
assigned.
--
John Eells
z/OS Technical Marketing
IBM
a lot of CPU
Both these stc's have a higher priority than our CICS.
Has anyone else experienced this problem?
we use Z/OS version 1.13
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN
to any of
them. So IBM's commitment is the same in Canada as it is in the USA or
elsewhere.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
.
Jeff Magdall
z/OS Product Manager PDT Lead
magd...@us.ibm.com
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
eServer(TM) zSeries 990 (z990)
IBM eServer zSeries 890 (z890)
IBM eServer zSeries 900 (z900)
IBM eServer zSeries 800 (z800)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN
and conversions that are delivered solely through a
modification to the LIC will be withdrawn.
Hint for searching announcement letters: Use the product number rather
than the product name. (The product number for z10BC is 2098.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee
written in short blocks.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
, usually, most products say they run on a minimum level of z/OS
or higher. I'd expect things like VS COBOL to run on z/OS V2.1 if they
ran on z/OS V1.13, but like anyone else I can't prove that without
looking them all up.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
Also, you might find this list helpful (we will fix the typo for the
release number, never fear):
http://www-03.ibm.com/systems/z/os/zos/software/isv210.html
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
with SYS1 and some information about them. For just the list,
omit ALL.
Victor Hugo Ochoa Avila wrote:
Hello Group.
I want to know if it is possible to list all datasets on the system but I'm
just interested to obtain the list by the HLQ.
snip
--
John Eells
z/OS Technical Marketing
IBM
Demystified, Session 8759.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
channel
commands. ECKD identifies extensions only to the CKD command set; the
CKD track format itself is the same.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff
as valid, and
a quick test on a 2.1 system shows that it's still accepted.
So...what led your users think this is a new restriction? (It seems as
though we might have to fix something, somewhere, but what?)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
before and can give me some indication of where to look?
Did you use CLPA for the IPL?
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
that way.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
the necessary levels of
utilities (such as SMP/E, IEBCOPY, and the Binder) needed to install
COBOL 5.1. It's not terribly unusual for the driving system, or
installation product level, requirements to be lower than the levels
required to actually *run* a product.
--
John Eells
z/OS Technical
Paul Gilmartin wrote:
On Mon, 24 Mar 2014 10:58:28 -0400, John Eells wrote:
All this means is that z/OS V1.12 includes the necessary levels of
utilities (such as SMP/E, IEBCOPY, and the Binder) needed to install
COBOL 5.1. It's not terribly unusual for the driving system, or
installation
drives?
In fact, more customers are now ordering the COD on DVD than on tape,
which I found a bit surprising when I heard that earlier this month.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM
and existing restrictions here and there might
well preclude actually doing so.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
was made concurrently with making the COD available on DVD.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Timothy Sipples wrote:
Yes, installation services are available from IBM and service partners.
As John Eells points out, if you prefer to install z/OS from scratch in
house then you'd use the z/OS Customized Offerings Driver, available at no
additional charge with your z/OS license (assuming
-managed PS basic and large
format, PDS and PDSE, and GDG data sets
- PL/I Support with the PTF for APAR PM43745 (available on z/OS R11
and up)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM
?Open
Please let us know if it's still not helpful.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
://publibz.boulder.ibm.com/epubs/pdf/e0z2k100.pdf).
Miklos Szigetvari wrote:
Maybe the PFA can help us, but I don't know how :
We have a long running USS process, so called stress test.After some
hours, stops to use CPU or any resource,how we can detect this ?
snip
--
John Eells
z/OS Technical Marketing
IBM
area.
Vote early and often...as usual, no promises, except that I'll at least
listen.
R.S. wrote:
W dniu 2014-04-28 20:47, Mark Pace pisze:
I don't understand why library sizes on a fresh install of z/OS never
seem
to account for doing maintenance. snip
100% agreed.
snip
--
John Eells
z/OS
, right now.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
) fails because it still has the steps to
copy, update and replace this check :(
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
question 10 years from now would the answer change? What function would
you have given up in return?
Just some food for thought.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN
the point, like many of
those above, it's not a new one.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
that
the mainframe platform (we're on a z/10) can actually run at 100% and not die
as opposed to other platforms.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff
.
Can I find out what the query was?
We are using z/OS 1.13
snip
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
the DFSMSdss program to restore COD tape
contents. Please let me know if you need any other details.
I'm using HMC, Operating system messages panel to perform these steps.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsieb
ee...@us.ibm.com
housekeeping. (How much of it is
productive? It depends on your workloads.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
in the highlighted manner. But they
didnt specify the link between the Version and IPL process particularly. I mean
whether its related to count(no of ipl) or something else(thru some command etc)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
.
Precisely; in fact, we just implemented the use of Product Registration
Services in PSF V4.5, its new release.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
improved markedly.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Charles Mills wrote:
Pardon my ignorance: what exactly is a cache line?
The caches are divided into 256-byte increments called cache lines in
current processors.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
to have neglected to get this into the announcement. My
apologies to everyone, including the DFSMSdss team (who actually
implemented that function at my request, making this omission
particularly embarassing).
John Eells wrote:
Please open a PMR.
(Repost to list server...sorry for the double post
.
--
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
and not accepted. You probably want to
use a copy for this if you are concerned about missing fixes or
accepting PEs. Also, you should take off the usermods and re-apply them
in the new zones.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
in the
first place are essential. What scared *me* the most was not having
those at hand, as they were supposed to be. This was probably why I
kept a list and a set of labeled dump tapes in my desk...just in case.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
+++ RC(8) +++
snip
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM
simplifies management and usability with new
superior performance
QA afterward.
To listen in or participate, go here (registration is required):
https://engage.vevent.com/rt/ibm~thinkzos
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
HOLDDATA was
introduced, the ~2250K size of the Full file was a lot of data to
download. Today it's peanuts. Just get the Full file. We should
probably think about taking down the Month/Quarter/Year options at some
point. (Yell if you think you need them! But tell us why.)
--
John Eells
z
This should, of course, say: I'm afraid it is not the case *that* no
ill effect can arise from processing older HOLDDATA than you have
already processed.
John Eells wrote:
I'm afraid it is not the case there no ill effect can arise from
processing older HOLDDATA than you have already
)
starting in z/OS V1.12, and access usercats and volcats in RLS mode
starting in z/OS V2.1.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions
with an updated copy.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
a deeper understanding of how TSO works.
Additional Q: Does anyone know where the default attributes mentioned in
msgIKJ56644I are documented?
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN
the
design's age is probably at least a year or two older than that. I
suspect those designers have long retired, and doubt that anyone still
at IBM recalls why they chose the design they did choose.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
be flagged to note the actual mapping.
There are now a number of these instructions and they should be identified.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive
.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
follow this list.
snip
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
Lizette Koehler wrote:
Or you could write or call Share directly for friendly answers
snip
There you go, Lizette, making sense again. Probably the best answer of all!
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
Charles Mills wrote:
Is zAware free? That was not my impression but I could easily be wrong.
zAware is a priced feature of zEC12 and zBC12 servers.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
/
integrity APAR and just apply the PTF?
snip
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
scorings and APAR/PTF information in the portal, not
direct information about the vulnerabilities themselves or ETR text.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe
they think it's an important one.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message
to a relative file. But that's sophistry
even
more extreme than my pedantry.)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
and collecting
diagnostic data. And so on...
(Hey! How'd that soapbox get down there, anyway?)
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
command. For
example, you can now remove all members of a PDS or PDSE data set in a
single command.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access
anything, but it seems an effective coping
strategy that is reasonably independent of how we might choose to
organize the information. YMMV, of course.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
, which should vastly reduce the probability of that sort of
problem occurring for temporary data sets.
The keyword is SYSTEM TEMPDSFORMAT(UNIQUE|INCLUDELABEL), and
INCLUDELABEL (the way the system used to act) is the default.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee
on all supported
servers.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
(or should) we let people know?
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM
Edward Jaffe wrote:
On 2/8/2013 7:41 AM, John Eells wrote:
Edward Jaffe wrote:
On 2/6/2013 6:16 AM, Paul Gilmartin wrote:
FTPS, but not SFTP?
Is this retroactive to products older than 2.1?
As I understand things, this really has nothing to do with z/OS V2R1.
Not sure why it's
would wish is far
safer.
--
John Eells
z/OS Technical Marketing
IBM Poughkeepsie
ee...@us.ibm.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
1 - 100 of 564 matches
Mail list logo