this argument with Mike
Wood. Apparently no one ever had to verify the label on a scratch tape...
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu wit
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
The D PPT command tells all.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message
the fields are.)
Hey Dave,
ISP.SISPMACS(ISPDSTAT)
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
nswer turned out to be a simple one. The macro never existed before
2006.
$01=ZOS19 2006/05/27 HO: Created
Dinosaur.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
uot;Zowie!", followed by "Biff!", and then "Pow!"
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ow folks out there aren't
exploiting extended GDG's.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
There is no WHY. There is onlyPOR.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
RACE ON;TRACE 80 command, then your failing APF command, then TRACE
OFF. Do a DA OJOB, and a ? in front of the user's TSO session, and look
at the ISFTRACE DD. The RACF profiles are listed in there and you
should see the profile you're fail
ing with a
clean profile. Some settings can be forced or reset, but most defaults
only appear with a clean profile. Google my Configuring ISPF for Fun
and Profit session, I have a step-by-step for updating ISPCFIGU.
Regards,
(Lib 33) |
| BLAH.BLAH.LINKLIB |
| Module address:1F82F048 |
| Module size: 0F98 |
| Reentrant |
| Serially reusable |
| Not loadable only |
| AMODE 31|
| Authorized library |
| Not Authorized program |
+-+
Regards,
Tom Conle
eally wide-spread
distrust of an "unavoidable 'push'"?
.
.
A wise man once said, "If it ain't broke, don't fix it, but with z/OS,
it's ALWAYS broke!" Older guy, beard, wore a denim newsie
Regards,
Tom Conley
-
etting of some kind? If it is VTAM, where is it specified?
Just curious here, no actual problem to be solved ("Doctor! Doctor! It hurts when I do
that!"; "Well, don't do that!").
Peter
--
Peter,
o via
panels, execs, etc., without subverting ISPF itself. Unfotunately,
we'll probably be waiting a long time (and probably forever) for IBM to
enhance ISPF itself. That's why I'm trying to deliver as much
functionality as possible wi
On 2/28/2019 2:56 PM, Lizette Koehler wrote:
I know, it seems several people I know are struggling with the new enhanced IBM
search functions
So how do they find the following in the IBM website?
SIS
APARS
Lizette,
The hostage crisis is over, www.ibmlink.ibm.com works again.
Regards,
Tom
, SMP/E will automatically remember where it left
off and continue. You should only use REDO at the direction of IBM or
OEM vendor support.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions
SHELL because it's an ISPF table display and not a dynamic
area. If you need the performance, you still have to use ISHELL.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send emai
On 3/19/2019 6:23 PM, Gibney, Dave wrote:
http://www-01.ibm.com/support/docview.wss?uid=ibm1MIGR-5081748
Dave Gibney
Information Technology Services
Washington State University
Yes, and Yes.
Regards,
Tom Conley
--
For
r help,
mario
Mario Bezzi
Watson and Walker
watsonwalker.com
Mario,
Linky no worky again. Shocking. You know the only thing more surprising
to me was if they actually worked. IBM, committed to 24/7 downtime.
Regards,
Tom Conley
---
32XX3? It's a dynamic logmode
that will query the terminal for the size. Be sure you have this line
in your TN3270 PROFILE:
TELNETDEVICE DYNAMIC D4C32XX3 ; User defined screensize
Regards,
Tom Conley
--
For IBM-MAIN
On 5/2/2019 1:10 PM, Bill Johnson wrote:
Not at all.
Anyone know how this would affect the Mainframe?
Thanks
Keep an eye on OpenJDK https://openjdk.java.net/. I expect this will
make its way on to the mainframe in the not-too-distant future.
Regards,
Tom Conley
re at the moment.
Thanks for that pointer Alan. Found this link in that presentation (WTW):
https://developer.ibm.com/blogs/java-licensing-is-changing-and-you-could-be-affected/
Regards,
Tom Conley
--
For IBM-MAIN subscribe / si
"for sure" ?
.. Or maybe not ? ;)
Mike
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
D M=CPU on my ZD&T show
LE, since the report itself could be invaluable in debugging
a storage problem. The title of the RFE was hacked and shortened,
making it unintelligible, so no votes have accumulated for it. Please
look it up and vote for RFE 48916 if you're so inclined.
Regards,
Tom Conley
Bob,
WTW!
up sudo to do the command all at once. "sudo unmount.".
Using su requires a password that you would not want in the clear.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
s either. Keep us posted.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
On 6/8/2020 12:56 PM, Frank Myers wrote:
Can ISPF services, such as panel display, be called from Python? I know they can be
called from rexx & TSO clists.
Frank
Frank,
Try using Python's equivalent of CALL ISPLINK (use the COBOL and PL/I
examples in the ISPF doc).
Regards,
T
...@listserv.ua.edu with the message: INFO IBM-MAIN
Wow, an article about legacy code from someone who actually knows what
the hell they're talking about.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive a
Gadi
Still only one last time I checked.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
On 6/29/2020 2:47 PM, Norman Hollander wrote:
Perfect! Thanks... Don't have ACF2, but I can figure out the RACF ones.
Norman,
Don't put RACF in your exclusion list, it isn't necessary.
Regards,
Tom Conley
---
sed it in all
my GRS sites.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
e.org). It has member grouping capability, and supports the XMIT
command to create an XMIT OUTDATASET that you can transfer and RECEIVE
INDATASET on the system. Contact me offline if you want to pursue this
further.
Regards,
Tom Conley
---
right, left to see your whole layout. A huge screen would help.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
that a tape is being entered. Are you using EXPORT or EJECT? If
using EXPORT, make sure you IMPORT the tape, not just ENTER it.
Good Luck,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
Messages and Panels in VLF? There's no class for ISPF
to read them.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
add a 'V' in
front of the volser name - VDS0001
Steve
Steve is correct. You need to do a LISTCAT VOLENT(VVDS001) ALL to get
the result.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access in
n the EDGUTIL job.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
end
applying a small PTF that you can easily verify. If it works, you can
proceed with some confidence that you got the right targets.
Good luck,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instruct
On 8/19/2020 3:00 PM, Lizette Koehler wrote:
List -
I have been researching whether we need to review all of our SCHEDxx for PPT
and remove anything that is currently shipped by IBM in Linklib for IEFSDPPT
Does anyone have any observations on this?
I am currently working on some DB
all the notes and JCL used to implement the
product in there.
Lizette
This is a good answer for a small product. I was once faced with trying
to figure out a z/OS zone. Reinstalling z/OS was not really an option.
I just got lucky that the plan came together.
Regards,
Tom Conley
AXR02
C AXR03
C AXR04
C AXR05
C AXR06
C AXR07
C AXR08
C AXR09
C AXR10
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
e all the little buggers are gone.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
BOL and 140 new PL/I
keywords. You can grab FILE967 at www.cbttape.org. Lots of other
goodies in there.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.
On 9/2/2020 12:35 PM, Robert Prins wrote:
On 2020-09-02 16:16, Tom Conley wrote:
On 9/2/2020 11:30 AM, David Crayford wrote:
On 2020-09-03 1:47 AM, Robert Prins wrote:
This seems to go hand-in-hand with HILITE. Does it understand that
PL/I has no reserved words and that any of the above
E to get these documented?
Thanks,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ound to Perl, it has over 1000
keywords lone, so that would have added at least 3000 lines to ISREDDE2.
Modularity.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...
On 9/3/2020 11:25 AM, David Crayford wrote:
I don’t want to bother with XMIT files. Git has been ported to z/OS and works
great.
David,
Others have requested GIT, so stay tuned.
Regards,
Tom Conley
--
For IBM-MAIN
On 9/4/2020 3:16 AM, David Crayford wrote:
On 2020-09-03 11:34 PM, Tom Conley wrote:
On 9/3/2020 11:25 AM, David Crayford wrote:
I don’t want to bother with XMIT files. Git has been ported to z/OS
and works great.
David,
Others have requested GIT, so stay tuned.
Thank you Tom! You can
ent, but that's
just how IBM rolls.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
then saves it, all changes from the SYSB session
are lost. If you share datasets across LPARs, you should share the ISPF
profile across those same LPARs.
As an aside, if you're using exit 16 to build your profile name, you
should move that logic into your TSO logon exec.
Regards,
Tom C
on prompt
at
LOGOFF: "Do you want to save or discard profile changes?"
This is an option with shared profile support. Either do it in
ISPCCONF, or the SHRPROF command.
Regards,
Tom Conley
--
For IBM-MAIN s
. If I remember correctly, if
the xmitted file is PS VB then XMIT manager yaks.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
On 7/11/2019 11:32 AM, Jake Anderson wrote:
It's PS + FB XMITTED file.
On Thu, 11 Jul, 2019, 7:26 PM Tom Conley, wrote:
Jake,
Sorry, that's it, it's any xmitted PS file. I reported this to Neal
years ago, but he never had a chance to get it fixed. You'll need to
On 7/20/2019 6:53 AM, Bill Giannelli wrote:
After running a SMPE APPLY, how do you determine which libraries were updated
and need to be moved into run time libraries?
thanks
Bill
Bill,
The DDDEF report will give you that information.
Regards,
Tom Conley
RDW), PRESERVE OFF will truncate any trailing blanks. I'm good with
PRESERVE OFF. Isn't that why God invented VB?
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
PMR immediately with IBM to report a packaging error.
They're rare, but they do happen. IBM will be able to tell you pretty
quickly if it's a packaging error, or if you had an error in your SMP/E
that caused this. Be sure to NEVER, NEVER, NEVER use BYPASS(ID).
Good luck,
NetView and SA/390, so
you should read up on them as well. Metro and Global mirror are PPRC
and XRC based, so get familiar with them.
Good luck,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions
On 9/9/2019 1:04 PM, Mark Zelden wrote:
On Mon, 9 Sep 2019 07:55:29 -0500, Peter Fatzinger wrote:
Mark,
The 1M increment for RUCSA storage was not chosen haphazardly. We understand
the scarcity of below-the-line memory, but in order to provide the isolation
needed to adequately protect th
so if you try to do this with SMP/E maintenance hitting
both, you'll likely fail spectacularly. Good luck.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@lis
t set up with
UACC(READ) and all your usercats with UACC(UPDATE). Put them in the
global access table for a nice performance boost. Only allow update and
alter to the master cat and alter for usercats to your catalog
administrators. Good luck.
Regards,
Tom Conley
--
On 10/2/2019 5:37 PM, Ed Jaffe wrote:
El Segundo, CA—October 2, 2019: Phoenix Software International, Inc.,
today announced they have entered into an agreement with IBM® under
which Phoenix Software International has licensed the source code for
IBM’s z/OS JES3 spooling subsystem, offering a so
cribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Kirk,
If you have PDS in your shop, look at the code for the USAGE command.
If not, grab it at cbttape.org, file 182.
Regards,
Tom C
is truly fully utilized, then a 30TB paging subsystem makes sense.
Unless I hear differently from IBM, paging rules still apply, even for
10TB systems.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive acc
subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Wayne beat me to it. Terse any DFDSS file before sending. You may get
away with DFDSS with mode block and EBCDIC. Until you don't. Terse it
for 100% reliability.
AVP | Manager, Systems Engineering
Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI
49546
616.653.8429 | fax: 616.653.2717
From: Tom Conley
Sent: Tuesday, November 5, 2019 5:17 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Zfs from
: 616.653.2717
Dave,
It is chargeable. Youse wants to break da rules, IBM wants da money ;-)
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the
On 11/6/2019 10:02 AM, Vernooij, Kees - KLM , ITOP NM wrote:
Can you point to where that is documented?
We FTP a lot b.m.o. DFDSS between Sysplexes.
Kees.
Kees,
I cannot find it documented anywhere. It's what IBM told me in response
to a PMR.
Regards,
Tom C
, Broadcom, could have changed IDMS to fix this, instead of
fobbing it off on us. I've never used another product where I had to
set the USERKEY. They were just too lazy to modernize and use
cross-memory instead of the SVC. Don't get me started.
Regards,
On 11/7/2019 9:49 AM, Jake Anderson wrote:
Do we need ICSF to be running while implementing ATTLS ?
Jake,
Yes.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
, there are thousands more keywords to
identify)
SHELL
SQL
TYPESCRIPT
XMLASCII (a must if you're working with or customizing z/OSMF workflows)
Ideas and contributions are always welcome, so download CUCI and try it
out. Please feel free to contact me if you have any questions or concerns.
-
up on a supported version of z/OS for a few months.
IBMLink is the search engine for fixes. You can also try Dr. Google.
Since you're not supported for z/OS V2R1, you should do a RECEIVE ORDER
ALL to get all the mainten
On 1/7/2020 10:28 AM, Jake Anderson wrote:
Hello
Apologies if this a dummy query
Apart from EDGRMMXX and JCL specifications where else the physical tapes
get its retention period ?
Regards
Jake
UXTABLE.
--
For IBM-MAIN sub
mmand, but it's
been a few years since I've seen it. Backup your target zone before
running UPGRADE just to be safe, but I've never had an issue with UPGRADE.
Regards,
Tom Conley
--
For IBM-MAIN subscr
70 port, a DDOS revocation attack is
possible whether you have PASSWORDPREPROMPT(ON) or not. The fix did not
enable the DDOS revocation attack, the potential has always been there
to run it.
Regards,
Tom Conley
--
For IBM-MAIN
ally publically available and, if so, can someone tell
me where?
Robin,
Vote for RFE 107052 and 107053. Been asking IBM for YEARS to support
the basics for PDSE's, still no dice. LISTDSI supposably will return
the PDSE version. Don't get me start
e z15 should provide you
their plan.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
og to delineate a migrated
dataset (MIGRAT, ARCHIV, and ARCIVE are the ones I've seen). You will
also need to issue the product-specific commands under the covers.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / arch
On 3/5/2020 6:08 PM, Jesse 1 Robinson wrote:
From the dawn of time, it was deucedly difficult to find the cause of a JCL
error during TSO logon. Then several releases ago, we were treated to a 'fix'.
The error would be displayed on the user's screen, allowing the problem to be
corrected withi
BBLUNPAX.sh on my system, but I found BBLU1702.sh in
/usr/lpp/liberty_zos/.
Good Luck,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
case introduces a subtle change in the value. There are
several other subroutines with the same problem.
The solution is to change that first line of code to, for example,
SecsX100Bin = Arg(1)
Someone give me a shout if I am wrong.
Charles
Charles,
c All 'arg ' prefix
was compiled by (for example) Enterprise COBOL
V6R3M0?"
PDS, file 182 on your CBT tape dial. www.cbttape.org
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@
...@listserv.ua.edu with the message: INFO IBM-MAIN
Look up ZSTART. If you want to make it different every time, you'll
have your hands full.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instruc
going past 15.7M lines in
a member, you should be OK. Various pieces of z/OS still don't support
that (like 5 years later).
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
works for the CBT Overflow Tape, which alone has 315 additional files.
FYI,
I can echo Sam's sentiments, as I beta tested this dialog. It unlocks
the CBTTape like nothing before it. It greatly simplifies the process
of getting CBT content and loading it on your system. Enjoy!
Regards,
HA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
I rise in agreement with my good friend Mr. Babcock. Anything less than
AES256/SHA384, you're asking for trouble.
Regards,
led web address .
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
OL?)
and was told that mhvrcfs was appropriate.
Charles
Charles,
The RCF email address is listed in each product manual. mhvrcfs is the
most popular, but not the only one.
Regards,
Tom Conley
--
For IBM-MAIN subscr
uld open a case to have Rocket fix this.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
a bare metal restore back to OpenSUSE. If you try Ubuntu, I
wish you luck.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
FLOWASM highlighting in July of 2020, blessed by no other
than Ed Jaffe himself. You should try it out and let me know if you
have any issues, I will fix them.
BTW, this product is free and I support the @#$% out of it.
https://cbttape.org/ftp/cbt/CBT967.zip
Regards,
Tom Conley
ne so, you should run ISPCCONF to set the default
primary option menu to ISR@PRIM and the default ISPF APPLID to ISR.
Search for my Configuring ISPF for Fun and Profit for detailed
instructions on how to do that.
Regards,
Tom Conley
sts to it.
ISPF-L should be put out of its misery.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
is there some command I can execute that'll determine whether an ALTLIB or
LIBDEF statement is (so to speak) active?
Bob,
You can use TSO ALTLIB DISPLAY and outtrap to see if ALTLIB is active.
There is also an ISPF service QLIBDEF to show the LIBDEFs.
Rega
iving me a
SYSTSOE version of 4040 which looks suspiciously like spaces, but my primary
question is about the RACF version.
Thanks,
Rex
Rex,
Please open a case to fix SYSLRACF and SYSTSOE. Those variables should
display the correct version information for RACF and TSO.
Regards,
arles,
So a variable designed to show the level of the product is perverted
because someone was worried about comparisons? OoooK.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
onetheless, I'll send in a request for them to fix it along with the TSO one,
once I get my head above water.
Rex
Rex,
I'm guessing we might have to do an RFE to get other variables
(SYSVRACF?) that have the correct output. Keep me posted.
for file sharing.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
noff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Scott,
ALLOC the files to your TSO session, then use DDLIST with the "M member
ddname" command to find the module.
Regar
http://lbdsoftware.com/tutorprt.xmit
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
variables.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
search SYSY*, and it should find the
fully qualified alias in CATALOG.ICF.VSMP301.
Regards,
Tom Conley
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
1 - 100 of 311 matches
Mail list logo