Title: Hauppauge PVR-150MCE
Hi there,
I have been attempting to follow the helpful advice available to get my TV card working with MythTV 0.17. So far I have had no success at all getting any TV input whatsoever. I have attempted to do a make install of the ivtv driver version 0.3.2.h but r
ch 2005 11:55 p.m.
> To: ivtv-devel@lists.sourceforge.net
> Subject: Re: [ivtv-devel] Hauppauge PVR-150MCE
>
>
>
> On Thu, 10 Mar 2005, Rick Stewart wrote:
>
> > Hi there,
> >
> > I have been attempting to follow the helpful advice
> available to get
> > my TV car
E
>
> On Thursday 10 March 2005 02:55, Christian Viller Hansen wrote:
> > On Thu, 10 Mar 2005, Rick Stewart wrote:
> > > Hi there,
> > >
> > > I have been attempting to follow the helpful advice
> available to get
> > > my TV card working with MythTV
l] Hauppauge PVR-150MCE
>
> On Friday 11 March 2005 14:57, Rick Stewart wrote:
> > Thanks Jarod - the RPMs I appear to have loaded for ivtv are these:
> >
> > ivtv-kmdl-2.6.10-1.766_FC3-0.2.0-65_rc3g.rhfc3.at
> > ivtv-firmware-1.8a-4.at
> > ivtv-firmware-dec-2.
Title: Ivtv with PVR-150MCE PAL
Hi,
Well it looks like things are closer but I only get static when I do a capture from /dev/video0. I have tried switching through all the channels using
/usr/lib/ivtv/ptune-ui.pl and
/mplayer -vo xv /dev/video0
Nothing but static and no sound. I have a
I am trying to capture from Saturn TV (cable) here in New Zealand and the
only way I seem able to get a picture is from the composite output from the
cable box. All attempts to get any kind of picture from the tuner input on
my card output from the cable box's RF output result in static. Although I
Yes, this is the best I can get from my PVR150MCE but only using the
composite input. The tuner input gives nothing but static.
I'm also using the 0.3.2p driver in a PAL country (New Zealand).
Sorry I can't be more helpful...
Cheers,
Rick
> -Original Message-
> From: [EMAIL PROTECTED]
Thanks Chris - Followed this through step by step, also changing VBI setup
to 'None' rather than 'PAL-NZ' from mythtvsetup as Haukur suggested.
I now have a clear picture from my PVR150-MCE on the composite input -
Hurrah!
Sadly, very weak, poor quality audio - I have to crank the amp that audio
Title: IVTV options info please
Hi can anyone point me at some doco on the ivtv options used in various modprobe.conf examples? E.g the recent post from from mrwester included the following modprobe.conf setiings:
alias char-major-61 lirc_i2c
alias char-major-81 videodev
alias char-major-8
Also - could you post your modprobe.conf settings?
I used to have those 'tuner not set messages' until I put 'options ivtv
ivtv_debug=1 tuner=58,58,58,58 tda9887=0,0' into my modprobe.conf although
I'm confused as to why I need 58 repeated or why I need it at all seeing as
the driver seems to detec
PVR-150MCE, driver 0.3.2q, Tuner LG S001D MK3 (idx = 60, type = 580)
Video from both composite and tuner but no sound...
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Nick Butts
> Sent: Thursday, 7 April 2005 11:25 p.m.
> To: ivtv-devel@lists.
devel@lists.sourceforge.netSubject: Re: [ivtv-devel] IVTV
options info please
On Apr 8, 2005 6:55 PM, Rick Stewart
<[EMAIL PROTECTED]>
wrote:
Hi can anyone point me at some doco on the ivtv
options used in various modprobe.conf
examples?Not sure if this is what you're
loo
Title: Modprobe options for PVR-150
I have read and followed a lot of the collected wisdom from everyone on the list concerning getting the above card working in my machine. There appears to be two basic schools of thought:
1. Jarod's recommended approach - minimal modprobe.conf settings, e.
I was getting this exact same problem with a PVR150 and it all burst into
life after adding the following options to modprobe.conf
options saa7127 i2c_enable=-1
options cx25840 i2c_enable=1 no_black_magic=1
options tda9887=0
options ivtv ivtv_debug=1 tuner=58
I don't know why setting the tuner ty
l] pvr500
>
> On Apr 9, 2005 7:10 PM, Rick Stewart
> <[EMAIL PROTECTED]> wrote:
> > I was getting this exact same problem with a PVR150 and it
> all burst
> > into life after adding the following options to modprobe.conf
> >
> > options saa7127 i2c_en
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Matt
> Sent: Sunday, 10 April 2005 3:29 p.m.
> To: ivtv-devel@lists.sourceforge.net
> Subject: Re: [ivtv-devel] pvr500
>
> On Apr 9, 2005 8:22 PM, Rick Stewart
> <[E
sure if
> it will solve any of the problems you mention, but... might
> be worth a try?
>
> /drdaz
>
> On Apr 10, 2005 1:50 AM, Rick Stewart
> <[EMAIL PROTECTED]> wrote:
> >
> >
> > I have read and followed a lot of the collected wisdom from
&
I struggled with this too until I realised that
Myth appeared to be re-setting the resolution. I could get a good
picture using ivtvctl to set the resolution and mplayer to view the output from
/dev/video0 but in Myth, the picture was always cut off on the
right.
You need to go into the myth
Hi,
Just adding my 2 cents worth - I have 0.3.3e installed with a PAL
PVR150-MCE, type 58 tuner and get good video and tinny sound that is like
someone talking down a tube. Prior to 0.3.3e I was using 0.3.2q and the
sound was good.
I have had sound since adding the qss=0 option to modprobe.conf -
Looks like its trying to load the kernel ivtv drivers instead of the new
ones. Try renaming
/lib/modules/2.6.11-1.14_FC3/updates/drivers/media/video/ivtv.ko to
/lib/modules/2.6.11-1.14_FC3/updates/drivers/media/video/ivtv.ko.org then
unload and reload ivtv:
/sbin/rmmod ivtv
/sbin/modprobe ivtv
Ch
I have now got Myth displaying a good picture and clear sound using the
0.3.3x driver with kernel 2.6.10-1.770_FC3 on a PAL PVR-150MCE. I'm pretty
sure that things improved when I put less stuff in my modprobe.conf. It now
looks like this:
# New PVR150-MCE Settings
alias char-major-81 videodev
ali
Title: Cx25840 errors with PVR-150MCE
Hi,
I am seeing the following errors in /var/log/messages on loading the ivtv driver (0.3.3x) with my PVR-150MCE (PAL LG S001D MK3 Tuner type 58):
May 8 15:29:50 rimmer kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
May
Rick
> Hi there,
>
> Was just wondering, do you now have sound without qss=0? This suggests
> you have... Did the audiofmt line sort that out for you?
>
> Cheers,
> /drdaz
>
> On 5/1/05, Rick Stewart <[EMAIL PROTECTED]> wrote:
> > I have now got Myth disp
Hi,
I'm also experiencing this problem - started with 0.3.6m and persists with
0.3.6p. I'm in New Zealand (PAL B) and I'm using the composite input to the
card from a cable STB. My card is a PVR-150MCE. Excerpt from
/var/log/messages below:
Jun 21 22:45:31 rimmer kernel: ivtv: version 0.3.6 (p)
vel] ivtv-0.3.6p: PAL doublevision problems
>
> Rick,
>
> until Bryan or Chris can investigate this in depth, just
> remove the CX25840_SET_ACFG_DIS(0x01); line from the
> cx25840-driver.c file and recompile the driver. That's how
> I'm running 0.3.6p at the moment. Driv
25 matches
Mail list logo
