Can someone please point me to a u-boot that works on the Sochip S3?
V3S is DDR2, S3 is DDR3.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving e
Widora has made a dev board for it
https://item.taobao.com/item.htm?spm=a230r.1.14.1.164f3c8blfHq8u=587925184119=1=15#detail
On Fri, Sep 13, 2019 at 12:38 PM jonsm...@gmail.com wrote:
>
> Any know what is up with the Allwinner R11? Are they bringing back the V3S?
voice
interaction solution.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.co
d booting
>>>> >> both
>>>> >> from USB and SDcard.
>>>> >>
>>>> >> Digging through the commit messages for v3s mainline u-boot support
>>>> >> I've
>>>> >> noticed that SPL is disabled. Maybe
can't determine one way or
the other if it does.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunx
multiple output streams?
>From what I can tell from the non-existent information in the
datasheet, this is the same old Allwinner CedarX unit.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To uns
;
>
> Yes and then it restarts SPL. However I can't yet figure out why it is
> happening.
> u-boot-sunxi-with-spl.bin builds just fine. Can't understand why it fails to
> load.
>
> Clear the head first and then back to debugging I guess :)
If the image does not have the c
t!
>> >> spl: mmc init failed with error: -95
>> >> SPL: failed to boot from all boot devices
>> >> ### ERROR ### Please RESET the board ###
>> >
>> > So I guess I'm missing something. My head is not really clear atm.
>> >
>> &
On Sat, Jan 14, 2017 at 2:53 PM, André Przywara <andre.przyw...@arm.com> wrote:
> On 14/01/17 16:20, jonsm...@gmail.com wrote:
>> The Allwinner kernel referenced in this thread has source for working
>> DDR eMMC mode on the A64.
>>
>> http://forum.banana-pi.org/t/
to be extracted and applied to mainlining efforts.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@google
On Sat, Jan 14, 2017 at 10:42 AM, André Przywara <andre.przyw...@arm.com> wrote:
> On 14/01/17 14:42, jonsm...@gmail.com wrote:
>
> Hi Jon,
>
> (dropping the U-Boot ML, since this is not all related to to OpiZero or
> to U-Boot. Next time please send a separate email
" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are sub
On Wed, Jan 4, 2017 at 5:36 PM, André Przywara <andre.przyw...@arm.com> wrote:
> On 04/01/17 19:00, jonsm...@gmail.com wrote:
>> On Wed, Jan 4, 2017 at 12:29 PM, André Przywara <andre.przyw...@arm.com>
>> wrote:
>>> On 04/01/17 16:40, jonsm...@gmail.com wrote:
On Wed, Jan 4, 2017 at 12:29 PM, André Przywara <andre.przyw...@arm.com> wrote:
> On 04/01/17 16:40, jonsm...@gmail.com wrote:
>> On Wed, Jan 4, 2017 at 8:36 AM, André Przywara <andre.przyw...@arm.com>
>> wrote:
>>>
>>> On 04/01/17 11:25, Chen-Yu Ts
On Wed, Jan 4, 2017 at 12:29 PM, André Przywara <andre.przyw...@arm.com> wrote:
> On 04/01/17 16:40, jonsm...@gmail.com wrote:
>> On Wed, Jan 4, 2017 at 8:36 AM, André Przywara <andre.przyw...@arm.com>
>> wrote:
>>>
>>> On 04/01/17 11:25, Chen-Yu Ts
On Wed, Jan 4, 2017 at 8:36 AM, André Przywara <andre.przyw...@arm.com> wrote:
>
> On 04/01/17 11:25, Chen-Yu Tsai wrote:
> > On Wed, Jan 4, 2017 at 6:28 PM, Jagan Teki <ja...@openedev.com> wrote:
> >> On Tue, Jan 3, 2017 at 2:52 PM, jonsm...@gmail.com
On Tue, Jan 3, 2017 at 5:41 AM, Jagan Teki <jagannadh.t...@gmail.com> wrote:
> On Tue, Jan 3, 2017 at 3:38 AM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
>> I recently ran into a probably with the UARTs on the A64. Many
>> Bluetooth modules (like Ampak) use the UA
| 50 ++-
> 34 files changed, 713 insertions(+), 201 deletions(-)
> create mode 100644 arch/arm/cpu/armv8/lowlevel_init.S
> create mode 100644 arch/arm/mach-sunxi/rmr_switch.S
> create mode 100644 arch/arm/mach-sunxi/spl_switch.c
> create mode 100644 configs/su
kills the console. The console's UART clock was
calculated for a 24Mhz input clock. When you change the clock parent
over to 1.2Ghz the console dies. So this parent switch needs to be
done in uboot, not Linux.
Can anyone help out with a uboot that changes this clock parent over
to periph0x2?
--
Jo
gt; "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message
On Tue, Sep 20, 2016 at 11:50 AM, Andre Przywara <andre.przyw...@arm.com> wrote:
> Hi,
>
> On 20/09/16 15:49, jonsm...@gmail.com wrote:
>> On Tue, Sep 20, 2016 at 10:45 AM, jonsm...@gmail.com <jonsm...@gmail.com>
>> wrote:
>>> On Tue, Sep 20, 2
On Tue, Sep 20, 2016 at 10:45 AM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
> On Tue, Sep 20, 2016 at 10:10 AM, TsvetanUsunov <tsvetanusu...@gmail.com>
> wrote:
>>
>>
>> понеделник, 19 септември 2016 г., 20:06:13 UTC+3, Hans de Goede написа:
&
/embedded/emmc
They come in wide temp
https://media.kingston.com/pdfs/emmc/i_temp_eMMC_Product_Flyer.pdf
About $5 for 4GB from US distributors, so probably $3 from Chinese one.
Random check of similar Kingston part from Chinese supplier - $3.38
Support for HS200/HS400 is already in kernel so some
-
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout
t; --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.
; dts tool,
>> it is usually just a matter of manually copy and pasting the right
>> bits together to get a dts.
>
>
> As mentioned above, we still need a guide that maps between script.bin and
> the rather confusing dts file format.
>
> --
> You received this mess
, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
> There is code from Allwinner in their u-boot implementation for
> implementing fastboot. So far I have been unsuccessful in getting it
> to work. Has anyone succeeded in getting it to work before I dive in
> and try fixing it?
>
/usb_sunxi/usb_fastboot.c
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For mo
. And the
lichee repo at gitlab. Files in the lichee repo are too large for
github.
A wonderful next step would be to get rid of lichee/brandy and convert
over to mainline linux/uboot.
Let me know if there are any problem with the build, it is not well tested yet.
--
Jon Smirl
jonsm...@gmail.com
--
You
[1]:17
[ 231.922517] hwc force flip disp[1]:18
[ 231.972551] hwc force flip disp[1]:19
[ 232.022577] hwc force flip disp[1]:20
[ 232.072615] hwc force flip disp[1]:21
[ 232.122645] hwc force flip disp[1]:22
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subs
roup and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
The Pine64 has the OTG controller attached to the top normal USB jack.
So there is no OTG detection pin to tell the OTG controller when to
switch between host and device mode.
Is there some way to manually poke the kernel and force the port to
switch modes?
--
Jon Smirl
jonsm...@gmail.com
-is-still-legal-under-certain-conditions/
Or do these new rules only apply to routers and not end devices?
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiv
On Fri, Apr 22, 2016 at 1:36 AM, Siarhei Siamashka
<siarhei.siamas...@gmail.com> wrote:
> On Thu, 21 Apr 2016 19:56:10 -0400
> "jonsm...@gmail.com" <jonsm...@gmail.com> wrote:
>
>> On Thu, Apr 21, 2016 at 7:45 PM, jonsm...@gmail.com <jonsm...@gmail.com>
On Thu, Apr 21, 2016 at 7:45 PM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
> On Thu, Apr 21, 2016 at 6:01 PM, Siarhei Siamashka
> <siarhei.siamas...@gmail.com> wrote:
>> On Thu, 21 Apr 2016 16:14:13 -0400
>> "jonsm...@gmail.com" <jonsm...@gmail.com&
On Thu, Apr 21, 2016 at 6:01 PM, Siarhei Siamashka
<siarhei.siamas...@gmail.com> wrote:
> On Thu, 21 Apr 2016 16:14:13 -0400
> "jonsm...@gmail.com" <jonsm...@gmail.com> wrote:
>
>> On Thu, Apr 21, 2016 at 4:09 PM, Siarhei Siamashka
>> <siarhei.siamas
the MMC
flash.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more opti
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.g
On Fri, Apr 1, 2016 at 6:50 PM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
> What CPUs do these Allwinner dev boards correspond to?
>
> 15. octopus_f1-user
A83
> 17. astar_h7-user
A33
> 19. jasmine_perf-user
can't find this one
> 29. kylin_p2-user
What CPUs do these Allwinner dev boards correspond to?
15. octopus_f1-user
17. astar_h7-user
19. jasmine_perf-user
29. kylin_p2-user
33. tulip_p1-user
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"
Does Allwinner H3 Android 4.4 run on the mainline H3 kernel?
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to l
On Mon, Mar 14, 2016 at 2:22 PM, Manuel Braga <mul.br...@gmail.com> wrote:
> On Sun, 13 Mar 2016 18:00:17 -0400 "jonsm...@gmail.com"
> <jonsm...@gmail.com> wrote:
>> On Sun, Mar 13, 2016 at 5:16 PM, Manuel Braga <mul.br...@gmail.com>
>> wrote:
>
lt;alex.mob...@gmail.com>
>> > > wrote:
>> > >
>> > > > Rosimildo,
>> > > >
>> > > > Do you think you can do a rework on this ffmpeg tree and glue a
>> > > > C version of what you have achieved so far?
>&
On Sat, Mar 12, 2016 at 7:38 PM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
> On Sat, Mar 12, 2016 at 7:37 PM, @lex <alex.mob...@gmail.com> wrote:
>> You are right, i changed the input format to NV12 on GuvcView and got lower
>> CPU usage (250%) and Temp ~75C.
>
t;> >> On Friday, March 11, 2016 at 7:52:17 PM UTC-3, Jon Smirl
>> >> >> >> >> wrote:
>> >> >> >> >>>
>> >> >> >> >>> On Fri, Mar 11, 2016 at 4:42 PM, @lex <alex@gmail.com>
>>
on an ARM9
vendor kernel when the vendor does not update their code. I am porting
features from the current kernel back to their old system. I don't
have the source for everything to forward port their code.
On Sat, Mar 12, 2016 at 6:10 PM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
ection causes segmentation fault, whenever
>> >> >> >>> >> >> enabled.
>> >> >> >>> >> >> b) FFMPEG complains that timestamp ( PTS/DTS ) are missing
>> >> >> >>> >> >> on
>> >&
> >>> >>
>> >>> >> Note that this PCBA is the same price as most bare image sensors
>> >>> >> mounted on a flex cable. Plus I find it much easier to wire things
>> >>> >> with a simple USB cable instead of an FFC.
>>
t;most significant bits" is better. :)
>
>
> ChenYu
>
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-su
>> >> > Manuel Braga
>> >> >
>> >> > --
>> >> > You received this message because you are subscribed to the Google
>> >> > Groups "linux-sunxi" group.
>> >> > To unsubscribe from this group and stop receiv
gt;> >>
>>> >> The Sonix chips will appear as USB UVC devices when plugged into Linux
>>> >> and they will need no special drivers. They also work on Windows.
>>> >>
>>> >>
>>> >>
>>> >> >
>>> >
ogle
>> > Groups "linux-sunxi" group.
>> > To unsubscribe from this group and stop receiving emails from it, send
>> > an email to linux-sunxi...@googlegroups.com.
>> > For more options, visit https://groups.google.com/d/optout.
>>
>>
&g
;linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message be
Has anyone written a kernel GPIO driver for accessing the GPIOs in the
AXP209? I don't see one in mainline.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop
. There is no simple way to put a scope on it since the flex cable
has a coating on it.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
j
ed to the same
interface. The remote framebuffer was memory mapped into the address
space, you didn't need to use the DMA controller to access it.
>
> Alexis.
>
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
oot bootloader is able to print
>> >> an error message about this mishap on the UART serial console?
>> >>
>> >> As for the L2 cache, it has a much larger size than SRAM, but it is not
>> >> normally designed to be used instead of SRAM and DRAM. T
On Sun, Oct 4, 2015 at 6:14 PM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
> On Sun, Oct 4, 2015 at 4:26 AM, Alexis Jeandet <alexis.jean...@gmail.com>
> wrote:
>>
>> Hi,
>> On Saturday, October 3, 2015 at 1:39:55 PM UTC+2, Jon Smirl wrote:
>>>
&
h larger size than SRAM, but it is not
>> normally designed to be used instead of SRAM and DRAM. There might be a
>> way to configure it like this (I did not rule out this possibility yet),
>> but the documentation needs to be checked (ARM Architecture Reference
>> Manua
it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop
Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d
options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr
://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options
options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr
. Add all of this up and it is easy to end
up with 1Mb/s throughput from 2.4Ghz wifi. 5Ghz is hardly used and it
has 50 available channels. You will rarely encounter any crowding.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux
receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from
this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group
://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more
emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group
peripherals we need.
On Thu, May 7, 2015 at 7:03 AM, kevin.z.m...@gmail.com
kevin.z.m...@gmail.com wrote:
On 2015-05-05 at 21:21, jonsm...@gmail.com jonsm...@gmail.com wrote:
On Tue, May 5, 2015 at 12:00 AM, kevin.z.m...@gmail.com
kevin.z.m...@gmail.com wrote:
On 2015-04-29 at 21:20, jonsm...@gmail.com
...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi
On Tue, Jun 2, 2015 at 8:35 PM, Julian Calaby julian.cal...@gmail.com wrote:
Hi Jon,
On Wed, Jun 3, 2015 at 6:20 AM, jonsm...@gmail.com jonsm...@gmail.com wrote:
Resend with plain text for image links
I have one of these GA10H-A33 and tore it apart. They used an uncommon
wifi/BT chip
to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message
.
To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com
this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm
of peripherals I have to have.
Does anyone actually have any useful info on that?
Thanks,
--
Julian Calaby
Email: julian.cal...@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed
On Sun, May 10, 2015 at 10:23 PM, Luc Verhaegen l...@skynet.be wrote:
On Sun, May 10, 2015 at 09:49:43PM -0400, jonsm...@gmail.com wrote:
Does anyone have any info on the new Allwinner R8 module being used in
the Chip $9 PC Kickstarter? It is A13+flash+RAM on module.
I'd like to get a pin out
Does anyone have any info on the new Allwinner R8 module being used in
the Chip $9 PC Kickstarter? It is A13+flash+RAM on module.
I'd like to get a pin out and projected price. That module has to be
really low cost if they are able to make a $9 computer out of it.
--
Jon Smirl
jonsm
+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send
On Tue, May 5, 2015 at 12:00 AM, kevin.z.m...@gmail.com
kevin.z.m...@gmail.com wrote:
On 2015-04-29 at 21:20, jonsm...@gmail.com jonsm...@gmail.com wrote:
On Tue, Apr 28, 2015 at 10:37 PM, kevin.z.m...@gmail.com
kevin.z.m...@gmail.com wrote:
Hi,
The encoder allows you to set the MaxQp(0~51
If you've ever wondered what was inside an Ampak AP6330. Photo of one
we destroyed by accident.
https://drive.google.com/file/d/0B-2Z6FDzyIwrQUpYcUZFX25KMG9EQVlFWGx4bDl4R1VadjVZ/view?usp=sharing
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed
.
kevin.z.m...@gmail.com
From: jonsm...@gmail.com
Date: 2015-04-27 21:22
To: achun liu
CC: linux-sunxi
Subject: Re: [linux-sunxi] How to adjust bitrate of allwinner's encoder
dynamically
On Mon, Apr 27, 2015 at 2:45 AM, lyc.ac...@gmail.com wrote:
hi,all
https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com
an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails
...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group
this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi
an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving
Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com
this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options
.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https
.
To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux
it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop
Has anyone tried USB gadget mode on the A20?
Any success? Which kernels does it work on?
I tried it on mainline and the OTG device is not in the device tree,
I'm poking around and trying to figure out how to get it going.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because
...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm...@gmail.com
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi
received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jon Smirl
jonsm
1 - 100 of 360 matches
Mail list logo