A great Christmas gift from Santa a few years ago was a digital thermal gun .
It is very useful when diagnosing brakes and cooling systems. I also 'shot' my
tires on RV as a quick and dirty test to assure they are all carrying the same
load.
--
Peter T. Arnold P.M. x3
All Mail to:
I'm not into the technical,
I was doing some consulting at a local Nuke plant, forced to park my truck
under High Voltage lines of about 1 bazzilion volts.
The body of the truck was very uncomfortable to touch if you were well
grounded.
--
- Original Message -
From: Harry
Any Truckstop, buy DELVAC1.
Also hash eggs while your at it.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Allan Streib str...@cs.indiana.edu
To: Mercedes
Source of hints?
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Allan Streib str...@cs.indiana.edu
To: Mercedes Discussion List mercedes@okiebenz.com
Sent:
Some very new trucks have electric brake controls integrated with the truck's
wiring and electronics.
I tow 12k 5th wheel. I will only use the Prodigy and wire it carefully. Most
vehicles in the last 15 years have plug in harness available, I strongly
recommend them.
--
- Original
Agreed. Getting old sucks.
Rick
Who thinks youth is wasted on the young...
Not compared to the alternative...
-Pete-
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
SWMBO bought a new 1988 White Dodge 600, the most utilitarian car we ever had,
a very good runner for 150Kmi.
But, it was terrible plain looking. I paid a local striper to hand stripe it it
made a big improvement much better that tape. Paid him $150 to do here '01
Cruizer, same effect.
An
The 5.9L V-6 is 6 holes from a 318. I put 200Kmi very hard miles on my '92 P/U
in commercial use and pulling a 25' trailer.
Major short coming was very poor mileage. A chevy 350/2barrel would do better.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F.
You are 100% correct, I stand corrected. It was a tuff beast. When I bought it
the V8 had 20 more hp with a big step up in cost and insurance. The V6 was very
suitable, I did use Mobile1 in it as I tended to flog it like a mule, pulling
6,000lb trailer.
--
Peter Arnold
Windsor, CT
Looking very hard at a Dodge P/U at an independent dealer, I get nervous
dealing with these fellows.
Vin # 3D7KR28C17G724641
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
I have an inherent distrust of used car dealers.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, October 6, 2010 9:42:09 AM
Subject: Re: [MBZ] CarFax anyone?
I 'Overhauled' my doors at about 15 years. All hardware was available at Home
Despot. Changing one hinge at a time was relatively easy. Hint; when you
disconnect the driver, the door must go up and down smooth and track evenly.
--
Peter Arnold
Windsor, CT
- Original Message -
I 'Overhauled' my doors at about 15 years. All hardware was available at Home
Despot. Changing one hinge at a time was relatively easy. Hint; when you
disconnect the driver, the door must go up and down smooth and track evenly.
--
Peter Arnold
Windsor, CT
- Original Message -
Usually , when you notice a failed boot it has already contaminated the joint
with crap and it will have a short life thereafter. Dr. Booth recommended used
parts over rebuilt as the failure rate on factory joints is very low.
--
Peter Arnold
Windsor, CT
- Original Message -
Correct in Connecticut
--
Peter Arnold
Windsor, CT
- Original Message -
From: Greg Fiorentino gf...@dslnorthwest.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, September 27, 2010 7:04:21 PM
Subject: Re: [MBZ] OT: OTA HDTV
My daughter says that with
Very happy here with Vontage Phone.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Larry T l02tur...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
I'm thinking the Dale did all flavors.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Rich Thomas richthomas79td...@constructivity.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 28, 2010 8:38:30 AM
Subject: Re: [MBZ] Borescope WAS:
Running Win7 on 2 of our 3 machines. #7 upgrade on SWMBO machine at Win7 Basic
on my netbook. Very stable and easy network at home.
Gripe, I use OpenOffice and TBird. I don't seem able to make my TBird the
default mail program. Hence, if I try to send a document from Open Office, it
opens
More deluxe cars {Such as my '57 Grand Safari} had a double acting fuel pump
which supplied vacuum to the vacuum storage tank.
Trivia, for those of your who have never seen a vacuum. The tank was about 2L
in size ;-)
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen
A valued coworker is having grief separating the front hub from the knuckle.
The object is to change the rotors. Removed fasteners, soaked in penetrating
oil, use BFH {Not to extreme}.
Anyone BTDT and can advise?
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge
Sorry, it's about a 10 year old Accord.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: pm7...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent:
Thanks, not the problem. The hub will not release from the Knuckle.
Just confirmed, its a 92 Accord.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Meade M CIV
I've been using AMAZON to source parts lately with very good results.
My NEW starter {Made in China} for my PowerChoke was $97 + $12 shipping. That
was a very good price! The starter works fine, even had a printout of it's
current draw and other information.
--
Peter Arnold
Windsor, CT
The primary reason I used DELVAC1 in my 300SDL was cold start. That car would
reliably start at -10°. At about 300Kmi, it used 2 quarts between changes {At
20KMI}. With my driving regiment the f-soot was at 75% at that point.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford
I've forgotten the specific recommendation.
Key: It is the oil producers responsibility to define the allowed fsoot for his
oil. My old memory tells me that it was 4% and I'd change it at 3% .
I miss that car still, SWMBO did not like it. Too big and front end gave a
wallowing feel to her.
No sense getting anal about oil pressure.
You need 'Some' at idle and 1/2 gage at speed. If you break the drive shaft to
the pump for instance, you'll have '0'. The engine will probably seize before
you notice it. I blew an oil filter apart on a chebby 350 about 20 years ago.
The warning light
If the cops pull over a car with 2+ kids unbelted in my town, the charge is
'Risk of Injury to a Minor'!
They probable won't get a conviction, they will get your attention.
I subscribe to a newspaper in Texas out of a small town. Seem that there is on
death caused by ejection from Bubba's
Sister was hit by Coke truck. Carrier ignored claim, had to sue. Than, they
settled fast
--
Peter Arnold
Windsor, CT
- Original Message -
From: Tim C bb...@crone.us
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, August 11, 2010 11:25:18 AM
Subject: [MBZ]
Almost same story here, I was pulling on entrance to expressway, I jumped on
300SDL to it's redline . Opps, State Cop behind me after the smoke cleared. He
was in hysterics as he blasted by.
--
Peter Arnold
Windsor, CT
- Original Message -
From: WILTON wilt...@nc.rr.com
To:
Took the tour about 10 years ago, we have property nearby.
They put us in a bus and drove into a tunnel, under the lake which stores the
water. There we saw the 4 huge {to me} Motor/generators that run the process.
The entire site is also a very large nature preserve where bears are allowed to
The stupidity was that at inception, I would have taken $200 to bump paint
the slight damage on the door.
They sent an adjuster out who wrote it for $1300 which is the documentation I
gave the clerk of the court.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mitch
Google '5 S System Quality Methods'
Works for me, after the first pain of purging.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Tim C bb...@crone.us
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, August 4, 2010 1:29:37 PM
Subject: [MBZ]
Got to think outside the box.
Properly designed commuter car {50 miles/day} would recharge during the evening
hours when the electrical demand is very low and excess capacity can be used
very economically.
Example: In Northfied Massachusetts there is a unique storage system that uses
surplus
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, August 3, 2010 10:08:27 AM
Subject: Re: [MBZ] Say it ain't so!
The next house I build will have 8 walls full of cellulose
I was a fairly competent stick welder, haven't had any equipment for 20 years.
I bought a cheap 110v MIG about 15 years ago, spend stupid money to get the gas
coverage bottle set-up. I couldn't weld crap with it! It was terrible, I gave
up and put in in a corner.
About 5years ago, I mentioned
Reply;
Honey, I have 42 pairs of shoes in the closet, can I store my new lavender
pumps on your side?
Subject: Re: [MBZ] 190DT Prechamber
Honey, I can buy a new prechamber for $300, or get an entire used car
for $200. Is it OK if I store the used donor car over at [fill in name
of
PBR and Strip Clubs are for Wannabes.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Rolf r...@winmutt.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, June 14, 2010 1:57:54 PM GMT -05:00 US/Canada Eastern
Subject: Re: [MBZ] OT Beer review
Did PBR
I work in Enfield, could look at this for interested parties. I have no need
for another project.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, June 7, 2010 6:12:28 PM GMT
I Assume you are referring to the 7.3L Power-stroke.
Very good engine, big power from 1995 technology. Mine has almost 300Kmi. About
$1500 in engine related repairs along the way.
Can it be 'chipped'? Yes, you can also poke a rod thru the pan if you like.
I'm guessing a 4wd F-350 weighs
I agree to a point. The Ford chassis of that era was a much better truck than
the Chebby or Dudge.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Kaleb C. Striplin ka...@striplin.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, June 8, 2010
Drain all oil, wash the exterior to get loose oily crap off it, strap to a
pallet, take is to a Yellow Terminal and have it sent to closest Yellow
terminal, hold it there for pick-up. Local pick-up deliver tend to be very
expensive as you will need a tailgate delivery. If you have a friend
You should be made 'whole', returned to the state you were in prior to the
wreck. Most of us are not at all pleased when we are confronted with the real
value of our cars.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes
Back in the day, I payed school expenses driving a 'Mr. Softee truck. I worked
on 10% of the gross.
Stop truck,
Out of seat
Walk back
Kid wants $.10 cone
Make small cone
Get the nickle and 5 pennies
Back behind the wheel
Ding - Ding - Ding and drive away.
All for $.01
Yes, I too pick
Drive a Sonta, very good value there is this size car.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Curt Raymond curtlud...@yahoo.com
To: Diesel List mercedes@okiebenz.com
Sent: Wednesday, June 2, 2010 10:07:09 AM GMT -05:00 US/Canada Eastern
Subject: Re: [MBZ] OT:
Using 20Kmi oil change routine in my 300SDL {Delvac1}, I used to change the oil
1/year.
I'd always suck out the master cylinder and power steering supplies at the same
time and refill. Might have taken 2 minutes extra, great piece of mind.
--
Peter Arnold
Windsor, CT
- Original
In Connecticut River Valley , we have a bunch of old barns that are 100+ years
old, used for tobacco drying. If being torn down, thay are prized for their
chestnut 10 x 10 beams. A friend was given 2 several years ago to form a
small bridge on his farm. Problem, you must use a chainsaw to cut
Tranny swap? Check Speedometer accuracy...
--
Peter Arnold
Windsor, CT
- Original Message -
From: andrew strasfogel astrasfo...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, May 25, 2010 10:07:13 AM GMT -05:00 US/Canada Eastern
Subject:
I've weened myself from M/S Office applications.
I now use Open Office for everything, to my knowledge it will open, function
and 'save as' about everything.
Being a Yankee, I also appreciate that is is free.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Jim Cathey
About any dial indicator you buy will have a repeatable accuracy of .01mm.
That's only .0004. A conventional .001 indicator is probably repeatable to
.0001 or better.
If you buy a .0001 indicator, it will be so sensitive as to make it hard to
use. I have several of each and if I were to want
I'll give you $500..
Never mind, can't afford maintenance the one I have , hope she gets better
soon.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Kaleb C. Striplin ka...@striplin.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, May 24,
Pawn shop, Craigs list etc.
Only concern is that it should move smoothly, and not stick. My Sarrett 'Last
Word' is about 40 years old, works fine. A Mag base will be harder to find.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club
I agree, they are probably not as rugged as name brands.
Home mechanic is not as likely to drop and abuse them.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, May 24, 2010
Looks nice, no interest here.
http://hartford.craigslist.org/cto/1756366825.html
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
___
http://www.okiebenz.com
For new
Magnaflux show cracking in magnetic materials, Dye Pen in used in aluminum.
A word of caution here, they often show non relevant indications which for our
application could cause you to scrap serviceable parts. Make sure the person
doing the checking is aware of your requirements.
--
This is located in my town, I have no interest.
http://hartford.craigslist.org/cto/1731351546.html
--
Peter Arnold
Windsor, CT
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
http://hartford.craigslist.org/cto/1732065487.html
No interest here, about 20 miles from my home.
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change
If your going to put a diesel in that car, you may as well paint a character of
Mohammad on the hood so the whole world will hate you!
--
Peter Arnold
{Hiding where he lives}
- Original Message -
From: Alex Chamberlain apchamberl...@gmail.com
To: Mercedes Discussion List
Where is 'Here'. Tsunami danger in New England? Should I leave work early?
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Rich Thomas
Oil level lights are notoriously inaccurate. Circuit has sensor, some type of
timer relay etc.
M1 oil is like lemon juice when hot. About 90% will be in the pan after 5
minutes, the last teacup full will be tenacious and take many hours to drain to
the pan. That is why I usually change my oil
It is written in the book of Saint Marshall, DO NOT TOP OFF THE OIL.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Meade M CIV SPAWARSYSCEN-ATLANTIC Dillon, 53310
meade.m.dil...@navy.mil
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, April 6, 2010
I can help you with that, pull the wire off the sensor.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Meade M CIV SPAWARSYSCEN-ATLANTIC Dillon, 53310
It's to be assume you have a proper hat and not a cap...
Pete, who is retiring to about 70 miles North of Huston next year.
- Original Message -
From: Rich Thomas richthomas79td...@constructivity.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, March 31,
Thanks, you saved me some money as I already have a Red Sox baseball cap. I can
wear the visor in front I hope...
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Hans
Fix the Maytag. YOU have obstructed lines. plugged filter, non spinning wand,
etc. There has been no relevant design change is home style dishwashers, you
have a good machine and it's broken
--
Peter Arnold
Windsor, CT
- Original Message -
From: Kaleb C. Striplin
I do our dishes by hand. How else would I get them into the dishwasher.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mountain Man maontin@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, March 14, 2010 10:36:10 PM GMT -05:00 US/Canada
?? How does Stainless Steel reflect the heat ??
Is there a magic property involved where a cooler item {Stainless box} can
drive heat into a hotter item {The scalding hot dishes} ? This seem to defy
thermo 101 that I learned 40 years ago. Were the rules changed when I was
attending KEG201?
OK, I crawled into my dishwasher and closed the door.
It's dark, damn light went out
--
Peter Arnold
Windsor, CT
- Original Message -
From: Craig McCluskey diese...@pisquared.net
To: mercedes@okiebenz.com
Sent: Monday, March 15, 2010 11:58:53 AM GMT -05:00 US/Canada
I lost the link, I want to share. Please forward to me someone.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original Message -
From: Craig McCluskey diese...@pisquared.net
To:
What would the ideal weight be? I go about 235#
--
Peter Arnold
Windsor, CT
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, March 15, 2010 1:38:40 PM GMT -05:00 US/Canada Eastern
Subject: Re: [MBZ] Brake
Seems to me that the plastic bits were cooked and brittle on my 300SDL, better
to start with new ones from a TRusty sort of fellow.
--
Peter T. Arnold P.M. x3
All Mail to:
Secretary Hartford Evergreen Lodge #88 A.F. A.M.
34 Country Club Drive
Windsor, CT 06095
- Original
Engine shouldn't grenade, it's designed to sit against the governor for a long
time.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Meade M CIV SPAWARSYSCEN-ATLANTIC Dillon, 53310
meade.m.dil...@navy.mil
To: Mercedes Discussion List mercedes@okiebenz.com
Sent:
I'd like to be Richy rich and take that one to the Supreme Court. We are
guaranteed interstate commerce, I believe.
That being said, Connecticut will grab you if your buying the booze for resale.
Thats called tax evasion
--
Peter Arnold
Windsor, CT
- Original Message -
From:
Tax on cigarettes is state assisted suicide, should be illegal.
Cigarette smoking is proven to improve the gene pool.
--
Peter Arnold
Windsor, CT
I think Michigan defines up to two cartons of cancer sticks as
personal, and more than two cartons you're assumed to be an unlicensed
If you have a pit, make sure you have about $5 million in an umbrella policy.
You're going to need it when some one falls in, and they will.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Curt Raymond curtlud...@yahoo.com
To: Diesel List mercedes@okiebenz.com
Sent:
Been searching for several months for new struts for my HHR. My TRUSTY supplier
cannot get me Bilsteins ;-(
My choice seems to be:
NAPA @ $95
or
KYB at $75 {Mail Order from AJUSA}
Any knowledge base would be helpful
___
http://www.okiebenz.com
For
Don't bet too much, BTDT.
Thanks for the thought.
Pete
- Original Message -
From: Alex Chamberlain apchamberl...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, March 2, 2010 9:59:40 AM GMT -05:00 US/Canada Eastern
Subject: Re: [MBZ] O/T KYB Struts
I'd love to have Bilsteins, they don't make them for Mexican cars like my HHR!
--
Peter Arnold
Windsor, CT
- Original Message -
From: Peter Frederick psf...@earthlink.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, March 2, 2010 10:52:38 AM GMT -05:00
Some manufacturers phony the gauges to help avoid unnecessary service
complaints.
'Some' oil pressure is enough at idle, it will go up when you spin the pump.
You cannot explain that to a non technical person who assumes that more is
better all of the time.
Excessive oil pressure requires
I would not hesitate to use a compression fitting on a clutch line. Compare to
bake line the pressure is VERY LOW.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Dieselhead 126die...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, March 2,
You assume the victim is male because...
--
Peter Arnold
Windsor, CT
- Original Message -
From: Allan Streib str...@cs.indiana.edu
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, February 24, 2010 10:36:32 AM GMT -05:00 US/Canada Eastern
Subject: Re:
MAybe some one can help an old fellow who studied this 40 years ago and that
hit CONTROL-ALT-DELETE on his brain at a Keg-101 class the next day.
MAterial: common Aluminum Casting such as A356
I bore a hole 1. in it at 50°
The temperature goes to 100°
What size is the hole?
I've
Brakes will easily stall the engine, or lock it to the torque convertor's stall
speed. Try it, you'll do no harm. As a drag racer of years gone by, you could
easily hold the power of a duel quad hemi with manual drum brakes.
--
Peter Arnold
Windsor, CT
- Original Message -
I'm thinking they used Renault engines.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Curt Raymond curtlud...@yahoo.com
To: Diesel List mercedes@okiebenz.com
Sent: Tuesday, February 16, 2010 10:25:59 AM GMT -05:00 US/Canada Eastern
Subject: Re: [MBZ] DeLorean
I had
Well, I like some of them. At B/J this year there were several mid fifty's
Chebbies that looked to be 100% stock but had in fact been upgraded with modern
power and suspension. I'm thinking they would be wonderful drivers .
--
Peter Arnold
Windsor, CT
- Original Message -
From:
Don't buy it!~ 6.0 P'Coke is POS compared to 7.3. This one guy is bailing out.
Want to work on the turbo, remove cab!
--
Peter Arnold
Windsor, CT
- Original Message -
From: Rich Thomas richthomas79td...@constructivity.net
To: Mercedes Discussion List mercedes@okiebenz.com
I told my kid the same thing about her Hundi , she's driven it 160Kmi, one
timing belt
--
Peter Arnold
Windsor, CT
- Original Message -
From: Redghost redghost @comcast.net
To: Mercedes Discussion List mercedes @ okiebenz .com
Sent: Monday, February 15, 2010 2:32:27 PM
- Original Message -
From: Jim Cathey j...@windwireless.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, February 11, 2010 10:26:16 AM GMT -05:00 US/Canada Eastern
Subject: Re: [MBZ] (SPAM?) Re: Hey Andrew
Snip
I wouldn't want a CO producer inside the house. A
- Original Message -
From: Mountain Man maontin@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, February 9, 2010 12:01:04 AM GMT -05:00 US/Canada Eastern
Subject: Re: [MBZ] Off Topic - Colectomy
It used to be that a
script was not needed, but I am a
So much for 'Numbers Matching' at a Benz Auction.
My other car is a 1954 Nash Metropolitan, I have factory documentation on it,
comes from British Heritage Museum.
We are told that 'Back in the day' , the manufacturers would send out work
crews to up date when dealers had too much of last
Bring VIN# to dealer. He can tell you the engine S/N installed at factory.
Why would you care? Even the bad ones are good for a few weeks
--
Peter Arnold
Windsor, CT
- Original Message -
From: Donald Snook dsn...@mtsqh.com
To: Mercedes Mercedes@okiebenz.com
Sent:
My wife's older HP which runs WinXP Home was bogging down on McAfee from
Comcast. She was upset because the hard drive was running all the time.
I installed AVAST freeware and she is happy, I also use it on my machine and
laptop.. No reason not to
--
Peter Arnold
Windsor, CT
-
During the 60's, C/R would consistently report the 6 cylinder Ford 500 {or a
similar POS} it's Best Buy. So much for them as being auto experts.
--
Peter Arnold
Windsor, CT
- Original Message -
From: relng...@aol.com
To: mercedes@okiebenz.com
Sent: Tuesday, February 2, 2010
- Original Message -
From: Alex Chamberlain apchamberlain @ gmail .com
SNIP
I suspect a majority of the cars sold this way have been purchased at
dealer auctions in other states. Problem is, auction cars are, as a
rule, crap; new car dealers keep good trade-ins for their used lot,
You should get a lawyer...
--
Peter Arnold
Windsor, CT
- Original Message -
From: Donald Snook dsn...@mtsqh.com
To: Mercedes@okiebenz.com Mercedes@okiebenz.com
Sent: Tuesday, February 2, 2010 2:57:27 PM GMT -05:00 US/Canada Eastern
Subject: [MBZ] CL annoyances
Sorry for the
Do not open until Friday, would be fair to your boss for you to go home silly
in Ground Hog Day!
http://thereifixedit.com/
Pete
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
Buyer Beware, the force you rap the shaft with will be transmitted to the
steering box. May or may not be good for it. One steering box would buy a bunch
of pullers.
--
Peter Arnold
Windsor, CT
- Original Message -
From: Dieselhead 126die...@gmail.com
To: Mercedes Discussion
When I had my 1st angioplasty 20 years ago, the kept me in hospital for 3 day.
I threatened to sign my self out AMA, they released me and I drove my motorhome
over about 400 miles on the worst roads in the country {D.C. to almost Boston}
No real reason for you to 'feel better'. As I understand
20 years ago Back in the day; The standard of care was as follows:
You have chest pain, you don't die.
You go to E.R., you don't die in 2 hours
You are transferred to ICU, learned men come in and consult. Bitchy nurses make
you use a bed pan. You don't die
3 days later they perform an
I've somehow lost my favored SW pocket knife, I'm looking to replace it with
another high quality knife. I've looked at Gerber and SW. They are now massed
produced off shore and the quality has suffered. My test is to try to move the
open blade side to side, I expect VERY little on better no
I'm not sure 'the worst is over'
You probably need a lifestyle change. I hope your Doc sent you to Cardio Rehab.
About 3 weeks after one of my stents, while I was on a tread mill, nurse came
over and asked me to stop.
Shzzam, I was back in the cat lab getting anther stent!
--
Peter
1 - 100 of 531 matches
Mail list logo
