/msx%20sex%20controller%20mega%20bul
let%20gold.asp
Greetings from Erik Maas
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
it. At least, when I receive the specs
from someone...
Greetings from Erik Maas
- Original Message -
From: Adriano Camargo Rodrigues da Cunha [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 30, 2000 3:16 AM
Subject: Re: games
Ah, yes, nice... But I think my RS-232 isn´t very
products is done by an
external
company.
Greetings from Erik Maas
p.s. A good colleague has worked on the MSX card for the PC, and just
trown it away one or two years before I started to work there at Philips.
- Original Message -
From: Hans Otten [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent
it, you could use it.
But I do not think it will work this way!
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? cont
The Elektuur version is not made to the MSX standard.
By the way, more MSX developments that were published by Elektuur
suffered from serious problems. There is a signal on the MSX cartridge
connector that is called BUSDIR. On some computers this is not a problem.
This signal controls the databus
, I personally like PDF a lot better than postscript. Postscript always
leads me into
problems when I generated it on a unix system and I want to use it on a MS
system...
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscrib
it should not be difficult.
Greetings from Erik Maas
-Original Message-
From: Manuel Soler [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: maandag 14 februari 2000 10:37
Subject: 720 to 360 floppy drive doubt
Hi, I would like to ask...
Is there any possible way to use a 360kbs
are only possible with a turbo-R in this way.
But if you install the driver (DRIVER.COM, shipped with RS232C interface)
you can
use the Hitech-C extensions you have made a long time ago...
(It was foslib or something like that)
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe
sometime. But since I do not have much time, it could be this
project
will never start at all...
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not t
test.
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
thought I released some command line utils as well
And some info about how to tell the TSR to load the music data and sample
kit.
Yes, I know, it should be better...
* It has no MoonSound support
* It does not work like a DOS2 TSR (needs MemMan)
Greetings from Erik Maas
MSX Mailinglist
Hallo Manuel,
Mijn e-mail adres zou ik nog doorgeven geloof ik.
Dus: [EMAIL PROTECTED]
Of: [EMAIL PROTECTED]
Groeten, Erik Maas
-Original Message-
From: Manuel Bilderbeek [EMAIL PROTECTED]
Newsgroups: comp.sys.msx
Cc: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, September 20
I'm sorry, replied to the wrong address...
Sorry...
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL
because of the slot-switching, but because of the
access time
too!
Greetings from Erik Maas
p.s. I don't know what kind of program is under development, but I hope the
mapper
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscrib
in japan the actually use 110V
using 115V is no problem.
i have seen turbo-r's witch have been rebuild to 220V
just by replacing the main capacitor 200v type 400V type
(it's a switched regulated power supply)
however i would not recommend anyone to do this.
Ivan Latorre schreef:
Hello
I
the
coordinates to 0,0
Erik de Boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Sorry, but it seems I have used the wrong reply adress...
Greetings from Erik Maas
Vergat ik te vragen.
Kan ik van jou die databladen van de WD2793 krijgen ?
Tuurlijk...
Ik zal ze inscannen en omzetten naar PDF, ik heb acrobat editor 3.01,
dus dat moet wel lukken. Ik ben toch van plan om
MkII schreef:
Please do not sent messages to [EMAIL PROTECTED]
Sent them to [EMAIL PROTECTED], else my configuration , and other
peoples configurations too i think , directly puts then into
the trash folder .
And toad is only a remailer , it's not for normal use .
Erik de Boer
--
MSX
on the 8245. the sony hardware is also almost the same (needs 1 bit more
to set)
erik
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL
to transport data after reading
a
sector. when the gap size is too small (and he is on a pc formatted disk) he
sometimes
have to make a complete rotation for the next sector
erik de boer
Frits schreef:
Is the track formatted with an other interleaving setting ?
1 2 3 4 5 6 7 8 9
or
1 3 5 7 9
small
gap)
erik
Adriano Camargo Rodrigues da Cunha schreef:
Erik,
when the gap size is too small (and he is on a pc formatted disk) he
sometimes have to make a complete rotation for the next sector
But with a small gap do I gain more disk space, don't I?
If not, what
measuring (did i spell that right ???)
i still have 41464 dram's , but it's no use to replace them if you are
not sure the are defective.
erik de boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROT
is not allowed.
But what I try to tell with this nonsense is that the capabilities of a
RS232C interface
are not only limited by the software. The hardware is one of the biggest
problems.
Greetings from Erik Maas
p.s. If I have time, I could finish the V9938 colour ANSI version, it was at
a reasonable
homepage or send it using
E-Mail.
I tried to learn how to make music, and therefore I have written
this program. Just to be able to use a MIDI sequencer. I was
able to use the AWE 32 in my PC to play the data that came
from my MSX.
Greetings from Erik Maas
(I have also used it together
32237133
If you have a serial interface with bios a terminal program is build in
just use CALL COMTERM to use it.
the only serial intafaces with bios i know of are the sony (bios in rom) and the
philips (bios must be loaded from disk into ram).
erik de boer
--
MSX Mailinglist
rotate at all)
on the pcb of the spindel moter is a little capacitor (near to the spindel disk )
this one is leaking.
sometimes a little track on the pcb is also gone becourse of the acid fluid
from the capacitor
erik de boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL
registers
these
signals are located?
Greeting, Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
mapper with 64k mounted in it).
~Grauw
nope , no the 8230 has no mapper , the only philips with a 128K mapper and 64K
mounted was the 8220
erik
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROT
e a little modification and "mirror" 7FF8 etc to BFF8 it will work
erik de boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL P
then 1 mapper (however this
is
technically not allowed , but who cares)
Erik.
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (ww
.
Greetings from Erik Maas
-Original Message-
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Cc: Walter Bernardo Nunes [EMAIL PROTECTED]
Date: vrijdag 19 maart 1999 6:16
Subject: RE: FDC x 1.44Mb
Marco Antonio Simon dal Poz [EMAIL PROTECTED] wrote:
Maarten
, and the mapper is 128Kb wide , but only 64Kb of
ramis used.
Grtjs, Manuel
erik--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (ww
Ramon Ribas Casasayas schreef:
On Sun, 14 Feb 1999 22:42:26 +0100, Erik wrote:
when you have a 8280 with a lot of extra's build in you can
use scotkie diodes , the are expecive
I'm not a master on electronics but I do not recall any scotkie
diode...
You mean schottky, don't you?
eeh
Frengo schreef:
On Sun, 14 Feb 1999 22:42:26 +0100, Erik wrote:
Its possible to use a big 10A bridge rectifier instead of the four diodes and
mount it at the left side of
case to cool it down.
10A ?
Is not possible to use a 5A one ? It's cheaper :-)
by Frengo
5A is just
Frengo schreef:
On Sat, 13 Feb 1999 22:27:45 +0100, Martin Schumann wrote:
Hi everybody!
Erik wrote:
If the fuse gets hot or the fuse is blown replace the 4 (big) rectifier diodes
(it's a common defect for the 8280)
Its possible to use a big 10A bridge rectifier instead
are not ,, :-)
by Frengo
let's change the subject ...
grtz , Erik
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack
Martin Schumann schreef:
Hi everybody!
Erik wrote:
If the fuse gets hot or the fuse is blown replace the 4 (big) rectifier diodes
(it's a common defect for the 8280)
Its possible to use a big 10A bridge rectifier instead of the four diodes and mount
it at the left side of
case
p counting at 12 and
continue counting with 14
But I don't think this counting should be standarized or so, it's not that
important.
Some programs are better implemented when counting starts at 0, and some
like to start with 1.
Please, end this discussion;-)
Greetings from Erik Maas
p
What was the subject that resulted into these Flash memory
topics???
Greetings from Erik Maas
p.s. At the time I only know one released project that uses normal Flash
memory (29F???)
and that's an IDE interface from Sunrise Swiss. Very nice for a software
updates...
At the time it was released, the soft
Hello Erik,
Can you tell me if it is possible to use very fast modems with this 232
interface.
Specify very fast...
33k6 works, at least there are people using it.
I use CACIS program but sometimes it is very difficult to use all
Internet services, I will like to know more about ERIX
cartridge with
Flash memory. I programmed this cartridge with an adapter I made on my MSX)
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Prob
value.
when on mapper is bigger then the other one the unused bits must be left
free
so that the biggest mapper can use those bits.
some msx will fail to do this , this can even damage your hardware when
using
an external mapper. (one mapper will read 0 and the other 1 on the same
time)
erik
Hi,
Try to contact Frank Druijff at http://www.pc-active.nl/
He was (is) responsable for mccm and the CD-rom
Perhaps he he has some left.
Bye,
Date: Wed, 25 Feb 1998 11:29:34 +0100
From: "J. Lautenbag" [EMAIL PROTECTED]
To:[EMAIL PROTECTED]
. philips) do not use the diskchange signal
The only use ready (nothing to do with DC)
The check for diskchange by reading the fat or dir between the read actions
Erik de Boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscrib
Y0010 is rather slow.
it can take till 30 sec. before you get a "disk of line" or your msx stop's
booting.
a simpel solution : replace the disk bios with a bios from the NMS8250 or 8280
grts, Erik
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the b
loosing clock pulses.
when you access a divice witch can not handle 7.14 Mhz you let him swich back to
3.57 Mhz
with a little delay.
so when you acces the VDP or the diskdrive it will automaticly switch back.
erik de boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL
Hey, that's fantastic, ZMODEM download!!
You're great!!
Can it also be used with the RS232-interface Erik Maas produced?!
U...
I don't know how is this interface. Do you know what UART has it, and the
port addresses?
It has a 16550 UART at h80-h87
It should be compatible with the ACCNET
nnect a double sided diskdrive to the interface.
grts , erik
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
but the first for the non professional market
erik de boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Hi,
Hmmm... sorry for this "out of topic" message... but, somebody knows
WHEN "Metal Gear Solid" will be available in Spain?
Metal gear solid??
You mean solid snake??
Bye,
Erik Smit; mail: [EMAIL PROTECTED]
http://www.tip.nl/users/olaf.benneker/mcce.html
MSX Co
, a long time ago
So it's already available somewhere , i don't have it anymore
I know this kermit version was an adapted CP/M version.
erik de boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROT
PROTECTED])
sorry Alwin but this is not correct , the interface of the VY0010 is a complete
stand alone
interface, you can connect a drive directly.
i think you mean the interface of the sony HBD50 , this one uses a part of the
electronics
insite the drive housing
erik de boer
--
MSX
for an original. As far as TP3.3 it's the only
program wich has still support (not an priority).
Some other progs are still for sale.
I'm a former pr-member of MCCE.
Met vriendelijke groet,
Erik Smit
Faculteit der Werktuigbouwkunde
telefoon: 053-(489)1190
email: [EMAIL PROTECTED]
http
About the not-compatibility with Philips. Erik is right again.
Philips chose to make a rather different RS232.
Since it seems it was the most sold at Holland, it can be
regarded THERE as a standard. At Spain, France, Japan, Brazil
and so on, it is a nonentity.
For example, the most sold
[EMAIL PROTECTED] schreef:
Email removal 800-771-2003,
Monday thru Friday 8-5 Pacific Time
We'll Submit Your Site To Over 900
snik
It should not get mutch worse
Sending spam to a mailinglist and telling you to call when you don't want to
recieve
this mail...
--
MSX
... It sure wasn't for free...
A friend of mine has also a SCSI -- MFM conversion PCB. Just SCSI-1,
but nice to have these very old harddisks to work...
(slow, came from an old 68k based mainframe)
Greetings from Erik Maas
--
From: [EMAIL PROTECTED]
Sent: Friday, July 10, 1998 9:41 AM
he diskrom.
also philips msx have fast and slow diskroms. and the are a lot faster then the
sony fast diskrom.
but the basic version still remains 1.0.
erik de boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [
If you read the Zilog homepage in the Z380 section, the Z380 is still in the list
of products.
see http://www.zilog.com/frames/fz80_180micro.html
Greetings from Erik Maas
--
From: Antoni Burguera
Sent: Thursday, June 25, 1998 12:11 AM
To: [EMAIL PROTECTED]
Subject:RE
work at 40 Mhz. This does not say that the clock is or is not divided with four in the
R800.
Who is able to check this?
Greetings from Erik Maas
--
From: Manuel Bilderbeek
Sent: Friday, June 19, 1998 3:21 PM
To: [EMAIL PROTECTED]
Subject:Re: Turbo R?
On Thu, 18 Jun
. (Software that is monitor/TV dependant Who want's that?)
Greetings from Erik Maas
--
From: Laurens Holst
Sent: Tuesday, June 23, 1998 4:18 PM
To: [EMAIL PROTECTED]
Subject:Re: Color Burst (was: A question about the PSG samples)
-Oorspronkelijk bericht-
Van
condensed 7085
L.Q. pica 2025
elite
2430
(i hope this tabel won't be messed up in your newsreader)
Erik de Boer
MSX Mailinglist
because in series with the datalines
from the processor(s) to the cartridge connectors there are resistors.
(I think they are 100 ohm)
The engine doesn't have these resistors in it's way to the processor(s).
Greetings from Erik Maas
--
From: Egor Voznessenski
Sent: Tuesday, May 26
At 05:23 PM 4/20/98 +0200, you wrote:
I will reply in English, because this is the standard on the MSX mailinglist
as far as I know... Besides that, I will translate the message of Willem van
de Werf in English. Now anyone can follow this soap!!!
SNAP
cut my original message
SNAP
Hallo Erik
, Green, Blue).
They are all five bits wide.
You can select from 32768 colors.
Greetings from Erik Maas
begin 600 WINMAIL.DAT
M)\^(@`0:0" `$```!``$``00!@`(Y 0```#H``$(@ `
M ```$E032Y-:6-R;W-O9G0@36%I;"Y.;W1E`#$(`0V ! `"`@`"``$$
MD 8`^ $,`P``, (+``
Hmmm... It seems I have sent the previous message to the wrong address...
It was in Dutch and ment only for Stephan Szarafinski.
Sorry about that...
Greetings, Erik Maas
application/ms-tnef
?!?!!?
this is the buffer ram and working area of the rs232
I am VERY happy, if you can ansfer any of my questions these things are
driving me grazy !!!
Greetings :
--
-
\
\
\ greetings form [EMAIL PROTECTED] (erik de boer
in europe
the european machines use a separate PAL (Phase Alternating Line) encoder
or no encoder at all , only RGB output.
Erik de Boer.
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]"
from ease.
greetings
erik
--
-
\
\
\ greetings form [EMAIL PROTECTED] (erik de boer)
\ tel/fax (+31) 20 6459131
\ visit my home page at http://www.xs4all.nl/~erbo
..
ask the player ,random, to type a word out of the booklet
(something like "word 2 , page 11")
you can still copy it , but not as quick as only 1 disk.
Erik de Boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "
)this battery will hold for aprox.
8-10 year
Erik de Boer
--
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
kages I like because
it's one of the best and simple to use package. Allthough it's from
Microsoft.
Greetings from Erik Maas
application/ms-tnef
E-Mail en op het werk. Maar bij mij gaan er genoeg
weekenden voorbij dat ik mijn mail niet lees. Op het werkt ben ik wel de hele
tijd berijkbaar. Er verschijn een enveloppe rechtsonder als er mail
binnenkomt.
Groeten, Erik Maas
p.s. Nog toevallig IETS gedaan aan je MSX Ik weinig, alleen maar
high is
this configuration.
BUT, I don't know for sure of this problem exists with 256 kbyte.
Someone could check this.
Greetings from Erik Maas
--
From: Maarten ter Huurne
Sent: Wednesday, May 27, 1998 1:34 PM
To: [EMAIL PROTECTED]
Subject:RE: Looking for Ram (turbo-R
to be that
the origin of this problem is the one that's mentioned several times on this list.
Greetings from Erik Maas
--
From: Egor Voznessenski
Sent: Wednesday, May 27, 1998 2:27 PM
To: [EMAIL PROTECTED]
Subject:Re: Looking for Ram (turbo-R with S1990)
Now to the point with an external
74 matches
Mail list logo
