I laughed so hard I bumped my neon the table. Fortunately I wasn't hurt, I
had thick pants on as summer days argon. These puns were a noble gas but
most people would want to barium.
Tim Laing
--
You received this message because you are subscribed
On reflection these were so bad I should take them to the krypton the hill
for proper disposal.
I laughed so hard I bumped my neon the table. Fortunately I wasn't hurt, I
had thick pants on as summer days argon. These puns were a noble gas but
most people would want to barium.
My wife reported me to the pun police and they made a radon the house and
confiscated my pun dictionary.
On reflection these were so bad I should take them to the krypton the hill
for proper disposal.
I laughed so hard I bumped my neon the table. Fortunately I wasn't hurt,
I
had thick pants
Hi I have recently found a web site that sells all kinds of clothing and
mugs etc with lots of interesting artwork. Users can upload their own
images and vintage (non copyright) adverts etc. So you can get a shirt
made with your image on it but also offer them for sale to others. They
print on
...Got Neon? How about a rubber undershirt and a nice neon lamp ring
counter! Wear it in the winter when you are not sweating! This site has
a lot of neat items And discounts out the wazoo.Tim Laing
I can just see it now...
...Got Nixie?
Sent from my iPhone
On Jul 15, 2014,
I am very sorry to hear of Jeff's passing, my heart goes out to his family
and especially his children. I was 25 when my father passed away in 1987,
I miss him still. It would be so much harder at even an earlier age
Tim Laing
--
You received this message because you are subscribed to the
There are sets of 4 computer cards with socketed B-5971 multisegment
nixies on E-bay with a BIN of $79 and $11 shipping in US. I have purchased
some early tubes from this buyer and had good experiences. Auction
291115183163 There are 6 sets of 4 cards/nixies left. I don't think
these are very
Posted this over at Tekscopes, thought I would ask on these groups as
well. Tim Laing
Original Message
Subject: Anybody have a CRT for a 576 or know of a source?
From:lai...@wcoil.com
Date:Sat, March 1, 2014 11:04 am
To:
Kind of rotten to not even get an E-mail. I would say this outfit isn't
run very well, or just doesn't care. Commonly I see places that have fund
raisers or appeals for other help put bricks with people's and company's
names in the walkway or patio that was built etc. Or why not a brass
plaque
Check out auction 350987319019. It appears to be partial analog computers
made by Hickok that simulate Ford vehicles. Most likely solid state but
check out the card readers. They look like cardmatic tube tester card
readers. So maybe you could simulate the suspension on a Pinto and test a
6L6
I should have added these are on E-bay.
Check out auction 350987319019. It appears to be partial analog computers
made by Hickok that simulate Ford vehicles. Most likely solid state but
check out the card readers. They look like cardmatic tube tester card
readers. So maybe you could
Nick, I don't think there are any external sensors. These units are
analog simulators. They probably had a big set of patch panels that
allowed wiring the various analog elements to simulate a cars suspension
system etc. using the various log, sine and cosine etc circuits. You
would simulate a
Nick, I don't think there are any external sensors. These units are
analog simulators. They probably had a big set of patch panels that
allowed wiring the various analog elements to simulate a cars suspension
system etc. using the various log, sine and cosine etc circuits. You
would simulate a
I have several different plasma globes of different designs. Two of them
have clear glass and do have a white and distinctly green glow. One I
bought at Walmart on clearance, it is not a ball but more of a low dome.
The other is a Radio Shack Realistic Lightning Fury. These are not common
on
If I had those I would join a doomsday cult and have the nicest countdown
clock for the end!
Tim Laing
Or I would buy a pinball machine to put them in.
--
You received this message because you are subscribed to the Google Groups
Hi when I said my area may drop below freezing I meant inside the shop! I
am in Lima Ohio (North West Ohio) We have snow now temp 32 climbing to 34
during the day (quite warm compared to the last few days) Just enough to
make everything wet and slushy under the several inches of snow predicted
Hi, I don't have any pictures. I will try to do some digging tomorrow and
take some pictures to post. Though a little off topic. Maybe I will
throw in some shots of some nixie test equipment to get more on topic.
Tim L
I have a surplus WW 2 IFF transponder box that I picked up a couple of
Well I went looking and it wasn't where I thought it was??? Then on top of
that the phone battery died. I will keep looking around. Tim L.
Hi, I don't have any pictures. I will try to do some digging tomorrow and
take some pictures to post. Though a little off topic. Maybe I will
throw in
I have a surplus WW 2 IFF transponder box that I picked up a couple of
years ago at one of the hamfests for under $10. In unused condition, very
nice with acorn tubes and a doorknob tube for the transmitter. I think it
operates on 433MHz. I had an another one of these I picked up when I was
in
Hello, I am a bit slow here. Well no votes came in on the submissions from
the group. I read all the submissions to my local judge (Maria, my wife).
We both really liked the seasons tree. For the season that it is, it is
very adaptable for occasions other than Christmas(Hey it could count down
I have a couple of 6 NL5440A sets listed on E-bay. Listing 281224495624
for one of them. I will be listing some other displays as well in the
near future. I will be listing 6 Pinlight DIP-651Rs shortly. These are
incandescent 7 segment displays in a small DIP package.
--
You received this
To the group. This was sent to me by Jorge directly. I like this project
for several reasons, creative, father daughter project etc. Tim Laing
Dear sir or madam:
That is a very kind offer from you. I showed this to my daughter and she
thought that she could find an old aged piece of
I am listing a set of 6 tested NOS NL5440A (Smooth top design)nixies on
E-bay auction number 281219252887. Auction ends in about 16 hours. I
will be listing more of these tubes soon. This is my shameless plug.
I have been a member of this group for a long time and have learned a lot
and have
Here are some more pictures. I got 13 lamps of various types, the string
only takes 8 lamps. So a bit of a mishmash. I need to repair several of
the sockets before I can try to light the set.
I think the wiring is older than the lamps? The lamps are all marked
Japan 15 volt. Some of the bulbs
I have seen single bubble light, night lights here and there.
Tim L
How about a string of 201As and Blue glass Arcturus 201As hung on the tree
and lit up (Brass based tipped, even better) I almost forgot the super
airline Gold glass GX201As
I found an interesting web site www.bulbcollector.com (Probably known to
a lot of you all ready.) that has a lot of interesting information on
various types of antique lamps and some tube related info as well.
On the bulbs they cover incandescent, neon, argon etc. What caught my
eye was the
Mouser is a great source for new electronic parts. Their selection is
about as good as Newark or Allied but they are much more small buyer
friendly. They have a real cheap shipping option ($4.95?) and if I
remember right no minimum order. It is easy to set up an account. They
ship fast and they
Thanks for the correction on the minimum order, I didn't remember. I
always try to combine things I may need to get an order that makes it
worth paying the shipping for. Like you said a $10 minimum is pretty easy
to meet! The project lists are real nice for future reference. They list
I did some more checking and Mouser has no minimum order, that according
to their help topics page. The shipping options come up when you check
out. For the small parts I was ordering I used the lowest cost option as I
am in no hurry. The parts arrived quickly, they ship out very quickly! I
Couldn't you just use a piece of canned tuna fish in each nixie? Tuna has
mercury in it and I eat the stuff! Just joking of course.
Tim Laing
But I must add GREAT job on the nixies! Well not really great how about
outstanding job!
From: Nick
Well we have had the Haydu Brothers, Burroughs, National Union, Wang Labs,
etc. Now we have to add Farny Labs to the list of Nixie producers. Great
work Dalibor!!
It would be neat to see some nixie tubes with Art Deco or Art Modern
Numbers or some such decorative font!
What kind of price range are we looking at on these tubes? Where are you
located so we can get an idea on shipping. Thanks Tim.
Well, let me know what would be good price for all of you.
On Sunday, 21 July 2013 13:18:30 UTC+1, TLaing wrote:
Hello, if a group buy is done for the Z564S
Oh that gets complicated. I did a group buy for over 1000 Nixie tubes
for the Neonixie group some years ago. Boy that was a lot of work. I
shipped tubes all over North America, Canada and Europe.
It might be easier for you to see how many tubes are wanted in the US and
Europe. Then maybe ship
WARNING: This is a plug from the shameless commerce division. I have been
listing some nixies on E-bay on and off for quite some time. These are
NL5440As and NL841s. Check out auction 281094521523. To see the other
auctions just check my other items. Standard disclaimer, yes it is my
I get the neonixie messages in digest form. I would swear that I am not
getting all the messages and or digests. I keep seeing posts that seem to
refer to other recent messages that I have not seen. At least on the old
yahoo groups the digests were sequentially numbered. Anybody else notice
this
I was looking at a video on a nixie display board and in the related
videos this came up. Making a Round type C valve by Ron Soyland. The video
is about an hour long! His Youtube channel name is glasslinger.
http://www.youtube.com/watch?feature=player_detailpagev=GAMRHcbE3g0
I copied the link
5-ht please contact me. Tim Laing
Sorry to use Nixie bandwidth but this is nixie related.
--
You received this message because you are subscribed to the Google Groups
neonixie-l group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Sorry to use bandwidth. Trying to contact ppapon laingt at wcoil dot com
--
You received this message because you are subscribed to the Google Groups
neonixie-l group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubscr...@googlegroups.com
Sorry to use bandwidth here but I am trying to contact DutchGrey about
some nixie tubes.
Tim Laing laingt at wcoil dot com
--
You received this message because you are subscribed to the Google Groups
neonixie-l group.
To unsubscribe from this group and stop
Well I have a BFA dual majors in Ceramics and Printmaking. I can't ever
remember any of my friends having discussions about circles striving to be
squares etc. For the most part we were normal people and not pretentious
at all, of course we were in Ada Ohio, far away from the big city art
scenes.
Hello, here is a digest from shortly after I joined Neonixie, in early
2004. So I have been here just a little while. I also coordinated the over
1000 tube Richardson group buy. I chip something into the group every now
and then. I also post once and a while when I list something on E-bay
that
Been up too long, Write Avertising on the board 25 times mister Laing.
Hello, here is a digest from shortly after I joined Neonixie, in early
2004. So I have been here just a little while. I also coordinated the over
1000 tube Richardson group buy. I chip something into the group every
Jon I was on googlegroups and saw you had a Pandicon. I tried to contact
you off list but I don't know if the message went through. You can contact
me off list at laingt at wcoil dot com
--
You received this message because you are subscribed to the Google Groups
neonixie-l group
It should not be hard at all to make small ceramic washers. I would use a
slip casting method. I would start with a plaster of paris sheet poured
into a rectangular wood box. The top edges of the wood sides of the box
allow you to scrape the poured plaster of paris sheet to have a flat top
I thought I would let people know that I am listing some Nixies on E-bay
NL841s and NL5440As Look at auction 281056256986. Then look at my other
listings. I will probably sell some more than the ones I have listed now.
Tim Laing
--
You
2 Dekatron geiger counter/rate meter on E-bay England site Auction
300846357475. A bit expensive but neat to see. Not my auction etc.
Tim L.
--
You received this message because you are subscribed to the Google Groups
neonixie-l group.
Hello, A few days ago somebody found a book called Counting Tubes,
Theory and Applications on E-bay. Published 1949. Somebody else said
it was a instant print abstact of articles. Well I went out and
purchased a copy off of Amazon. I got a real honest to god original
book. It was withdrawn
I will be away from the computer for a while so I just wanted to say May
all your tubes glow warmly by and under the tree. And I hope old St Nick
will enjoy his bright new Nixie! Let all the cathodes glow with the
holiday cheer!
Not A Poet, Don't You
Hi, I just wanted to give an update. I purchased the magnetic cat door as
the cat does not have a digital chip yet, he is still all analog! Although
he does have 20 digits. I have to say this quietly as Skink is sitting in
my lap, he will be visiting the vet on January 9th and will come home a
Hello, well the cat problem has escalated. I opened the door this morning
and there was a unfamiliar tom on the stairs who had our cat backed up by
the window so he couldn't get to his accustomed cat bed. I caused some
consternation on the part of the 2 cats, finally after some growling the
tom
I just wanted to say thanks for the help with the cat door. I have decided
if I ever get a orange marmalade cat I will name it Nixie in honor of the
group! I hope everybody here has a happy holiday season.
Tim Laing
--
You received this message
There are a lot of smart people on this group so I thought I would ask for
some help. We have a stray cat that we have adopted. He is an indoor
outdoor type of cat. My personal experience is if they started outdoors
they are very unhappy if you try to keep them in all the time. Well the
problem
That is just about what I am thinking of. I just worry that the loud
speaker announcing please return to the store and the flashing lights
might scare the cat! Just kidding of course. Wire loop and a small cap for
the cat. Then the sweeping oscillator for the door. Now I need to find the
circuit
Here is a link for a (old)patent on a vehicle in lane detector using
passive coils in the roadway. No circuit details but it sounds like what
Dan was talking about. 12 inch single turn coils in the road with a 100nF
cap in series. etc. The hard part of this project is figuring out what
the
I had some luck tonight I picked up 5 new in the box ERICSSON GC10B off
of E-bay for the opening bid of $9.99 with $7.99 shipping. So there are
still deals out there to be found. Tim Laing
--
You received this message because you are subscribed to the Google Groups
neonixie-l group.
To
I am leaving in a few hours for a trip to the Paris area for a business
trip for equipment acceptance tests. I am one of the maintenance
mechanicss for this new equipment. I wanted to know if there are any good
places or areas to check out if I get a chance. Antique electronics,
Tubes, antiques
I should have said we will be there from May 2nd Leaving on May 6th.
I am leaving in a few hours for a trip to the Paris area for a business
trip for equipment acceptance tests. I am one of the maintenance
mechanicss for this new equipment. I wanted to know if there are any good
places or
Thanks for the information so far. Our group will not have a car so I am
pretty much limited to the metro system and walking. Tim
I should have said we will be there from May 2nd Leaving on May 6th.
I am leaving in a few hours for a trip to the Paris area for a business
trip for equipment
Sorry my last post to Nick DeSmith went to the group. It was meant to go
just to him. No big secrets or anything. I will just claim I was tired.
Tim Laing
--
You received this message because you are subscribed to the Google Groups
neonixie-l
Hi Nick, I am glad you got the tube in good condition. PLEASE keep me in
mind if you make up something with an AVR I would love to have the tube I
have come to life. What do you think, a retro scope clock? I sold the
CK1414 I got with the rest of you because I found a RCA 1698 monoscope on
E-bay
Hi, I recently noted that there were some Raytheon CK1414F10C monoscopes
on E-bay that were going for buy it now $20.00 + $10.00 shipping. I bought
one for myself and 4 more for members of these groups that live in Europe
as the seller only shipped to the US. Well I find that I have one of
these
Hello, I have 2 people that want it as of now. I will contact the first
person to answer and go from there. Thanks to all. Tim Laing
Hi, I recently noted that there were some Raytheon CK1414F10C monoscopes
on E-bay that were going for buy it now $20.00 + $10.00 shipping. I bought
one for
I picked up a AVO Avometer 8 mark3 VOM on E-bay recently to go with an AVO
tubetester that I aquired a few years ago. Boy are these meters built
heavy. It probably weighs twice as much as my Simpson 260. Well these
meters are not very common over here (USA).I thought that one of the group
members
The seller evidently had 20 of these tubes. After I bought one and made my
posting. (I thought it was a good idea to buy first!) The sales went on at
a good clip. Somebody must have a use for them as they bought 10! I ended
up buying a total of 5 as the seller would not sell to buyers outside the
Well those are going fast! 17 down 3 to go. Somebody bought 10 of them!
They don't sell internationally and I purchased one for a German group
member and one for me.
Standard disclaimer not my auction not affiliated with the seller.
Somebody has Raytheon CK1414F10C monoscopes buy it now for
Standard disclaimer not my auction not affiliated with the seller.
Somebody has Raytheon CK1414F10C monoscopes buy it now for $20.00 + 10.00
shipping on Ebay more than 10 available. They appear new in the box FAA
surplus Item number 300677567307. You can see the symbols on the target
plate at
Sorry to post this here. Jens, I sent you an E-mail about some vacuum
gauges. Did you get it? I had no reply. Tim Laing
--
You received this message because you are subscribed to the Google Groups
neonixie-l group.
To post to this group, send an email to neonixie-l@googlegroups.com.
To
I just finished reading the book The Man Who Invented The Computer, The
Biography of John Atanosoff By Jane Smiley. (I picked up the book on
E-bay for under 7 dollars) This is a very interesting book. (Though the
technical discussion on vacuum tube electronics leaves a lot to be
desired.)
J
Having worked at Lima Electric (Sadly No longer in Lima Ohio, Factory
Closed) for over 5 years making synchronous alternators, and 3 years in
the Engineering Test Lab I can pass on a little information on alternator
speeds. On a sychronous alternator the rotor operates with DC excitation,
either
Interesting that Terry P. should come up! I picked up one of his books
at the airport about 3 years back and got hooked. I have almost every
book he has written and I have been giving copies to the grandkids and
nieces. I just ordered the latest book Snuff another Sam Vimes
diskworld book. My
I can tell you where there would be a fairly big market for high
efficiency high voltage power supplies (IF THEY CAN BE PROPERLY SHIELDED
FOR RF LEAKAGE) that is B power supplies. The common voltages used in the
old battery radios for the plate supplies are 22.5, 45, 67.5, 90, 135, 180
volts DC.
I know that some of the group have built clock circuits that would output
a changing frequency to interface with a Nixie frequency counter. I know
that there have been circuits that output current or voltage for analog
meters. What I was thinking of was a clock circuit where the output would
be a
Does anybody know what this tube is?
This is an ended auction 170 623 013 824 take the spaces out to make the
12 digit E-bay number. Splitting into 3 digit sections makes it easier for
me to write down without errors. You will have to be logged in to look at
completed listings. I bid on it but
I am making a shameless plug. I have some (QTY 12) NOS NL5440A smooth top
nixies on E-bay auction 280634472003 ends in about 15 hours. I also have
some (12) NL841's also on E-bay 280637054757, about 5 days 14 hours on
that auction. These are from Richardson Electronics the same source that
we
These are the books in my Nixie Library. Some are pretty technical. More
technical than I am!
Cold Cathode DIscharge Tubes J.R. Acton, J.D. Swift 1963. Academic Press
Inc Publishers New York ( No Library Of congress Numbers) Very deep waters
a lot of theory and math.
Cold Cathode Glow Discharge
I worked in a Television CRT factory for several years in the sealing and
pumping, getterflash, highvoltage processing, ageing, final test and
matching. (I made some vacuume tubes of my own at work using parts of CRT
electron guns. I pumped them down flashed them and aged them. I have never
gotten
Didn't see this post on the digest? Will try this again.
If you have the book Electronic Counting Circuits by Dance, a lot of his
trigger tube counter circuits use Z700 U tubes. These are 4 lead trigger
tubes with the primer electrode for consistant firing even in darkness.
So if you want to
Hi I did the posts about the Extruded Aluminum Air Cylinders that would
make good industrial futuristic clock cases. I sold the one to one of
the group members and he is real happy with it. I have 2 more complete
units and a Center extrusion only. I have 4 end caps 2 that are solid and
2 that
Some comments were made about private E-mails. Well go to his listing and
you will see that he posted my statement about using my listing under
questions. He then posted the reply that I got from him and posted here
as his answer. You can't get more public than that. Anybody reading his
Well here is the update, such as it is. I turned this into E-bay earlier
tonight. I also sent an message to the seller through the question link
on the sellers auction. I was not nasty, at least I thought. Here is
what I sent to him.
Dear loveourfoxbody,
It is against E-bay rules to copy
First of all not my auction not related to seller other than I assume we
are both humans! It is a very interesting looking ELT tube handbook. One
of the pages shown is for cold cathode tubes. Probably a dekatron data
trove. 250754928152 about a day day and a half left. Shipping to US
pretty
81 matches
Mail list logo