Op donderdag 29 oktober 2020 09:51:10 CET schreef Freek de Kruijf:
> Op woensdag 28 oktober 2020 16:02:44 CET schreef Freek de Kruijf:
> > Op woensdag 28 oktober 2020 07:57:58 CET schreef Guillaume Gardet:
> > > Hi,
> > >
> > > RPi4 is now tested in openQ
Op woensdag 28 oktober 2020 16:02:44 CET schreef Freek de Kruijf:
> Op woensdag 28 oktober 2020 07:57:58 CET schreef Guillaume Gardet:
> > Hi,
> >
> > RPi4 is now tested in openQA: https://openqa.opensuse.org/tests/1451651
> > And there is no such problem.
> >
&
ves normal/fast. I don't have another RPi4. I
could try another uSD, but considering it is fast when it is up I have no
hopes. The uSD i use now is a Sandisk Ultra with 128GB and an encircled 10.
Also putting the image on it is fast.
> Cheers,
> Guillaume
>
--
fr.gr.
memb
an IPv4 and IPv6
address.
I filed a bug report https://bugzilla.opensuse.org/show_bug.cgi?id=1178221
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
of XFCE.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op maandag 7 september 2020 17:15:22 CEST schreef u:
> On 06/09/2020 12:05, Freek de Kruijf wrote:
> > Hi all,
> >
> > I have a Banana Pi M64 on which I installed:
> > openSUSE-Tumbleweed-ARM-JeOS-pine64.aarch64-2020.07.28-Build8.3.raw.xz
> > When perf
tion.
Any ideas?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op woensdag 8 juli 2020 09:45:59 CEST schreef Matthias Brugger:
> On 07/07/2020 19:52, Fabian Vogt wrote:
> > Am Dienstag, 7. Juli 2020, 19:06:38 CEST schrieb Freek de Kruijf:
> >> Op dinsdag 7 juli 2020 14:57:40 CEST schreef Fabian Vogt:
> >>> Hi,
> >>>
Op dinsdag 7 juli 2020 14:57:40 CEST schreef Fabian Vogt:
> Hi,
>
> Am Dienstag, 7. Juli 2020, 14:46:42 CEST schrieb Freek de Kruijf:
> > On the wiki page HCL:Raspberry_Pi4 I don't see an issue for Bluetooth
> > support. Because my normal keyboard died I am trying to use
.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op maandag 6 juli 2020 15:01:08 CEST schreef Matthias Brugger:
> On 06/07/2020 13:13, Freek de Kruijf wrote:
> > Op maandag 6 juli 2020 09:12:03 CEST schreef Matthias Brugger:
> >> On 05/07/2020 16:11, Freek de Kruijf wrote:
> >>> I have an openSUSE Leap 15.2 JeO
Op maandag 6 juli 2020 09:12:03 CEST schreef Matthias Brugger:
> On 05/07/2020 16:11, Freek de Kruijf wrote:
> > I have an openSUSE Leap 15.2 JeOS image running on a 4 GB RPi4. It reports
> > only 960MB RAM.
> >
> > Is there a solution to increase the amo
I have an openSUSE Leap 15.2 JeOS image running on a 4 GB RPi4. It reports
only 960MB RAM.
Is there a solution to increase the amount of memory seen and used?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e
Op maandag 29 juni 2020 11:09:21 CEST schreef Nicolas Saenz Julienne:
> Hi Freek,
>
> On Thu, 2020-06-18 at 14:34 +0200, Freek de Kruijf wrote:
> > Is there any progress in getting working sound in Raspberry Pi 4 images;
> > XFCE or KDE? Tumbleweed and/or Leap 15.2?
>
Is there any progress in getting working sound in Raspberry Pi 4 images; XFCE
or KDE? Tumbleweed and/or Leap 15.2?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op woensdag 17 juni 2020 18:22:44 CEST schreef Matthias Brugger:
> On 16/06/2020 17:57, Freek de Kruijf wrote:
> > I did a test with the newest KDE Tumbleweed image for the Raspberry Pi
> > 4B,
> > Snapshot20200612. I noticed it is using the newest kernel 5.7.1.
> >
, but there was no
login screen to start a Plasma session.
I made a bugreport: https://bugzilla.opensuse.org/show_bug.cgi?id=1172924
It also does not show the Wi-Fi device.
The keyboard is active in GRUB.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
Op dinsdag 16 juni 2020 14:12:12 CEST schreef Michal Suchánek:
> On Tue, Jun 16, 2020 at 02:02:44PM +0200, Matthias Brugger wrote:
> > +nicolas +michal
> >
> > On 16/06/2020 14:00, Freek de Kruijf wrote:
> > > I am doing some testing with the newest Tumbleweed images
r openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
ectory listings of /boot and /boot/efi.
>
> Ciao, Michael.
Did you try with a fresh image on another microSD?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
L.S.
Is there any indication when sound will be supported in an image (Tumbleweed
or Leap 15.2) for the Raspberry Pi 4B?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op maandag 3 februari 2020 15:05:08 CET schreef Nicolas Saenz Julienne:
> Hi,
>
> On Mon, 2020-02-03 at 14:34 +0100, Freek de Kruijf wrote:
> > Currently my Raspberry Pi 4B using the Tumbleweed image with XFCE is
> > showing a
> > flood of messages:
> >
> >
and how to get rid of them?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op maandag 20 januari 2020 12:38:00 CET schreef Freek de Kruijf:
> I just tried the JeOS, XFCE and KDE versions of the "official" Tumbleweed
> images for the Raspberry Pi 4. They use kernel 5.4.10.
> openSUSE-Tumbleweed-ARM-{JeOS,XFCE,KDE}-raspberrypi4.aarch64-2020.01.08-
> S
Op vrijdag 24 januari 2020 21:8 CET schreef Freek de Kruijf:
Repeated some of the tests on jan 24 using XFCE image for raspberrypi3.
> jan 24 14:02:23 bach2 systemd[1]: display-manager.service: Triggering
> OnFailure= dependencies.
> jan 24 14:02:23 bach2 systemd[1]: display-manage
systemd[1]: display-manager.service: Failed with result
'exit-code'.
After a reboot all looks OK, except the display-manager. Problem seems to be
the X11 server.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail:
s output from dmesg.
The last message was about swiotlb buffer full. Remembered a recommendation to
remove swiotlb=512 from the command line in grub.
Did so and did a reboot. Access via ssh was fast. No obvious error messages in
dmesg anymore.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
ge. Tested only the JeOS image.
After installation of u-boot-rpiarm64, which removed u-boot-rpi3, and a reboot
the system saw the 4GB memory.
However the system also reported ext4 errors and some commands crashed.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensu
;
> Regards,
> Matthias
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op maandag 20 januari 2020 21:19:20 CET schreef Fabian Vogt:
> Hi,
>
> Am Montag, 20. Januar 2020, 12:38:00 CET schrieb Freek de Kruijf:
> > I just tried the JeOS, XFCE and KDE versions of the "official" Tumbleweed
> > images for the Raspberry Pi 4. They use kernel
n a public key for this type of access is
presented.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op woensdag 8 januari 2020 15:56:55 CET schreef Thorsten Kukuk:
> On Wed, Jan 08, Freek de Kruijf wrote:
> > The latest image for the Raspberry Pi 4B from Matthias Brugger appears to
> > be very slow when installing packages.
>
> Matthias told you several times to use the
fe34.emmc2: swiotlb buffer
is full (sz: 4096 bytes), total 512 (slots), used 511 ...
I could not find a parameter to increase the buffers.
Is it OK to report issues like these on this list?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr
Op donderdag 26 december 2019 16:40:01 CET schreef Freek de Kruijf:
> Today I tried image:
> openSUSE-Tumbleweed-JeOS.aarch64-15.1.0-RaspberryPi-Build61.34.raw.xz
> from Matthias Brugger.
>
> After installing xorg packages and pattern XFCE, adding a normal user, and
> setting
keyboard and mouse via USB.
There is no wired Ethernet interface (eth0) visible, only wlan0. Wireless will
probably not work because of a faulty wpa_supplicant packet.
Should I file bug reports for these problems?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr
access points, but I could not
connect to these.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
ant version 2.6-9.1 from the aarch64 repository. I could
connect to the 2.4 and 5 GHz access point. Version 2.9-1.1 contains a bug
which will be solved in January.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner,
Op maandag 16 december 2019 18:20:28 CET schreef Matthias Brugger:
> On 16/12/2019 17:41, Freek de Kruijf wrote:
> > Op zaterdag 14 december 2019 00:17:47 CET schreef Freek de Kruijf:
> >> Op woensdag 27 november 2019 15:13:13 CET schreef Freek de Kruijf:
> >>> Op w
Op zaterdag 14 december 2019 00:17:47 CET schreef Freek de Kruijf:
> Op woensdag 27 november 2019 15:13:13 CET schreef Freek de Kruijf:
> > Op woensdag 27 november 2019 14:05:42 CET schreef Narender Mann:
> > > Sent from my iPhone
> >
> > Matthias Brugger is curren
Op woensdag 27 november 2019 15:13:13 CET schreef Freek de Kruijf:
> Op woensdag 27 november 2019 14:05:42 CET schreef Narender Mann:
> > Sent from my iPhone
>
> Matthias Brugger is currently working on a working image for openSUSE
> Tumbleweed on the Raspberry Pi 4B. The main
ked fine for quite some time,
but started to crash and rebooted several times a day.
After replacing the power device, it behaved like before.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
ges showing the above shortcomings:
https://download.opensuse.org/repositories/home:/mbrugger:/branches:/RPi4/
openSUSE_Tumbleweed_ARM/
https://download.opensuse.org/ports/aarch64/tumbleweed/images/
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsub
Op zondag 10 november 2019 18:48:11 CET schreef Matthias Brugger:
> On 09/11/2019 17:25, Freek de Kruijf wrote:
> > Op vrijdag 8 november 2019 12:35:03 CET schreef Matthias Brugger:
> >> Out of interest, what's the most urgent thing you need in RPi4 that is
> >> not
rnet working with ssh access, so you don't need to configure
the system to run. It should run using DHCP from the image.
2. Make keyboard, mouse and display working, so a desktop can be used.
3. Make Wi-Fi working.
4. Make USB 3.0 working.
> Regards,
> Matthias
--
fr.gr.
member openSU
hing in openSUSE which does the same?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
documentation to see how these things should work?
I did work with python-RPi.GPIO.
> Regards,
> Matthias
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op vrijdag 18 oktober 2019 23:15:42 CET schreef Freek de Kruijf:
> Op dinsdag 24 september 2019 16:49:42 CEST schreef Matthias Brugger:
> > Hi,
> >
> > On 24/09/2019 13:24, Linux Kamarada wrote:
> > > Hi, everyone!
> > >
> > > AFAIK openSUSE
Op maandag 21 oktober 2019 13:42:09 CEST schreef Freek de Kruijf:
> I even have a problem with screen to connect via my USB serial line to the
> RPi4. I can't find how to change the window size from 24x80 to something
> larger. I tried "C-a : width -w 132 48" and "C-a
Op maandag 21 oktober 2019 11:00:49 CEST schreef u:
> On 20/10/2019 18:18, Freek de Kruijf wrote:
> > Op vrijdag oktober 2019 23:15:42 CEST schreef Freek de Kruijf:
> >> Op dinsdag 24 september 2019 16:49:42 CEST schreef Matthias Brugger:
> >>> Hi,
> >>>
Op maandag 21 oktober 2019 11:00:49 CEST schreef u:
> On 20/10/2019 18:18, Freek de Kruijf wrote:
> > Op vrijdag oktober 2019 23:15:42 CEST schreef Freek de Kruijf:
> >> Op dinsdag 24 september 2019 16:49:42 CEST schreef Matthias Brugger:
> >>> Hi,
> >>>
Op vrijdag oktober 2019 23:15:42 CEST schreef Freek de Kruijf:
> Op dinsdag 24 september 2019 16:49:42 CEST schreef Matthias Brugger:
> > Hi,
> >
> > On 24/09/2019 13:24, Linux Kamarada wrote:
> > > Hi, everyone!
> > >
> > > AFAIK openSUSE
to
> fix this tonight.
>
> Regards,
> Matthias
Today I got my RPi4B system. I tried both images on:
https://download.opensuse.org/repositories/home:/mbrugger:/branches:/RPi4/
openSUSE_Tumbleweed_ARM/
but did not get any result; that is: nothing on the HDMI screen. Tried both
outputs.
Op woensdag 18 september 2019 17:52:59 CEST schreef Freek de Kruijf:
> On a Raspberry Pi 2B "cat /proc/cpuinfo" shows o.a.:
> Hardware: BCM2835
> Revision:
> Serial : 8ce0c548
>
> All information I search for says the Raspberry
Op donderdag 19 september 2019 09:53:27 CEST schreef Matthias Brugger:
> On 18/09/2019 17:52, Freek de Kruijf wrote:
> > On a Raspberry Pi 2B "cat /proc/cpuinfo" shows o.a.:
> > Hardware: BCM2835
> > Revision:
> > Serial : 00
The packet python-RPi.GPIO relies on the accurate information in /proc/cpuinfo
Currently this packet sees the RPi 2B as a RPi 1.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op woensdag 11 september 2019 20:31:16 CEST schreef Freek de Kruijf:
> Op woensdag 11 september 2019 20:26:41 CEST schreef Freek de Kruijf:
> > I did have the same problem as Michael. After a "zypper dup --no-r" the
> > system did not boot anymore. I used the serial
Op woensdag 11 september 2019 20:26:41 CEST schreef Freek de Kruijf:
> I did have the same problem as Michael. After a "zypper dup --no-r" the
> system did not boot anymore. I used the serial connection with the RPi1 and
> there was no output at all.
>
> So I did check
n use ark or 7zip (any
> other archive extractor) to extract the files from this RPM.
> I tried the latest JeOS-raspberrypi image for RPi1 from
> http://download.opensuse.org/ports/armv6hl/tumbleweed/images/openSUSE-Tumbl
> eweed-ARM-JeOS-raspberrypi.armv6l-2019.09.04-Snapshot20190907.raw.xz and I
> have no problem.
> Cheers,
> Guillaume
I did have the same problem as Michael. After a "zypper dup --no-r" the system
did not boot anymore. I used the serial connection with the RPi1 and there was
no output at all.
So I did check the content of the first partition on the SD. It did lack the 6
files present in: raspberrypi-firmware-2019.09.04-1.1.noarch.rpm
On my desktop I unpacked these files and put them on the first partition.
After that the system boots again.
The question is: why were these files removed in the upgrade?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op maandag 1 juli 2019 10:18:32 CEST schreef Guillaume Gardet:
> Hi,
>
> > -Original Message-
> > From: Freek de Kruijf
> > Sent: 29 June 2019 15:26
> > To: Mailinglist openSUSE ARM
> > Subject: [opensuse-arm] Inconsistent names of Tumbleweed image f
added at the end.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op donderdag 11 april 2019 13:59:16 CEST schreef Matthias Brugger:
> On 10/04/2019 22:02, Freek de Kruijf wrote:
> Well that give us at least some more hints. :)
Hope you will find the culprit.
> > Before installation of kernel-default-5.1.rc4-1.1.g1478096 I changed
> > gpu_m
ssh.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op woensdag 10 april 2019 16:22:06 CEST schreef Matthias Brugger:
> On 10/04/2019 12:36, Freek de Kruijf wrote:
> > Op donderdag 4 april 2019 21:01:07 CEST schreef Freek de Kruijf:
> >> I searched on the Internet for the answer. Did not find even the
> >> question.
>
Op donderdag 4 april 2019 21:01:07 CEST schreef Freek de Kruijf:
> I searched on the Internet for the answer. Did not find even the question.
>
> Is there any support for a Raspberry Pi camera, bcm2835, on a Rasphberry Pi
> in an openSUSE system?
Started with the latest Tumb
I searched on the Internet for the answer. Did not find even the question.
Is there any support for a Raspberry Pi camera, bcm2835, on a Rasphberry Pi in
an openSUSE system?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
Op maandag 28 januari 2019 08:28:49 CET schreef Guillaume Gardet:
> Hi,
>
> > -Original Message-
> > From: Freek de Kruijf
> > Sent: 26 January 2019 22:12
> > To: Mailinglist openSUSE ARM
> > Subject: [opensuse-arm] Latest Tumbleweed for Raspberry
2] Rebooting in 90 seconds..
[ 91.909884] Reboot failed -- System halted
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
I updated the wiki on Banana Pi M64, which shows how it is supported.
Many thanks for the discussions.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op zaterdag 1 december 2018 16:59:44 CET schreef Freek de Kruijf:
> Op zaterdag 1 december 2018 15:47:17 CET schreef Andreas Färber:
> > Am 26.11.18 um 13:08 schrieb Freek de Kruijf:
> > > I downloaded the Upstream Pine64 image, did put it on a 16 GB micro-SD,
> > > and
Op zaterdag 1 december 2018 15:47:17 CET schreef Andreas Färber:
> Am 26.11.18 um 13:08 schrieb Freek de Kruijf:
> > I downloaded the Upstream Pine64 image, did put it on a 16 GB micro-SD,
> > and
> > started the Banana Pi M64 with it. It did boot, which I followed on the
&g
Op maandag 26 november 2018 15:53:38 CET schreef Freek de Kruijf:
> Op maandag 26 november 2018 13:08:36 CET schreef Freek de Kruijf:
> > Op zondag 25 november 2018 22:53:41 CET schreef Andreas Färber:
> > > > My suggestion to you Freek would be to join us in IRC on Freenod
Op maandag 26 november 2018 13:08:36 CET schreef Freek de Kruijf:
> Op zondag 25 november 2018 22:53:41 CET schreef Andreas Färber:
> > > My suggestion to you Freek would be to join us in IRC on Freenode's
> > > #opensuse-arm channel and we'll try to figure this out togeth
that problem. Pleased with the results so far.
Using IRC would be my first time. Will search how to use it.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op vrijdag 19 oktober 2018 09:52:32 CET schreef Alexander Graf:
> Hi Freek,
>
> On 18.10.18 16:45, Freek de Kruijf wrote:
> > I noticed a number of images/support for Banana Pi systems having an armv7
> > type processor architecture. Also using names with sinovoipbpi in the
could not
find that version for armv6hl. Any information on that?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op vrijdag 19 oktober 2018 13:32:25 CEST schreef Freek de Kruijf:
> Op vrijdag 19 oktober 2018 09:52:32 CEST schreef Alexander Graf:
> > Hi Freek,
> >
> > On 18.10.18 16:45, Freek de Kruijf wrote:
> > > I noticed a number of images/support for Banana Pi systems ha
Op vrijdag 19 oktober 2018 09:52:32 CEST schreef Alexander Graf:
> Hi Freek,
>
> On 18.10.18 16:45, Freek de Kruijf wrote:
> > I noticed a number of images/support for Banana Pi systems having an armv7
> > type processor architecture. Also using names with sinovoipbpi in the
an openSUSE Tumbleweed image,
dating a year back, which runs on this system.
Will there be support for the Banana Pi M64 with a more recent image? It does
seem very complicated to have such an image available in the ports repository
for aarch64.
--
fr.gr.
member openSUSE
Freek de Kruijf
Op woensdag 22 augustus 2018 18:13:20 CEST schreef Freek de Kruijf:
> I experienced problems with the 1GB memory of the Raspberry Pi 3, so I went
> to a Banana Pi M64, which has almost the same specifications as the RPi3,
> except it has 2 GB memory, and it uses a slightly different CP
USE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
ot;. At least you need
to see gpiochipN there, where N is some number. On my Raspberry Pi A with
openSUSE it is 298. Raspbian has 0.
The Python library RPi.GPIO needs to use this N to address the right pin. This
also means that the right /sys/class/gpio/gpioM needs to be used for a certain
pi
the necessary knowledge.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
l packaging, try opensuse-factory list.
>
> As Guillaume pointed out, this is most likely due to recommended rather
> than required packages.
>
> Cheers,
> Andreas
On https://en.opensuse.org/HCL:Raspberry_Pi you may find more information on
how to use YaST on your RPi.
--
fr.gr.
you create that file and enter a line "arm_control=0x200", most likely
without the "'s. After "umount /mnt", you put the SD in the RPi3B+ and boot.
That should do the trick.
Good luck.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
t the end of the
card and the second partition (ext4) will take the rest of the space on the
card.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
ockdev --getsz /dev/$dev)
dd if=/dev/zero of=/dev/$dev obs=1 seek=$(($size - 2)) count=2
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
make an entry in /etc/fstab like:
/var/swapfile none swap sw 0 0
mount -a
will mount the swapfile right after creation, otherwise it will be made
available in the boot process.
You can inspect the swap space using:
swapon --bytes
--
fr.gr.
member openSUSE
Freek de Kruijf
Op zondag 22 juli 2018 21:31:22 CEST schreef Freek de Kruijf:
> Op zondag 22 juli 2018 20:35:57 CEST schreef Andreas Färber:
> > If apparently you have the bootloader on eMMC instead of SD, you can use
> > the generic JeOS-efi.aarch64 image, for instance.
>
> Which one? I see
Op zondag 22 juli 2018 20:35:57 CEST schreef Andreas Färber:
> Am 22.07.2018 um 13:26 schrieb Freek de Kruijf:
> > Instead of a Banana Pi M3 I got a Banana Pi M64, of which I was uncertain
> > that the processor was the same as the one on a Raspberry Pi 3B.
>
> It is not. A
Op zondag 22 juli 2018 13:26:02 CEST schreef Freek de Kruijf:
> Instead of a Banana Pi M3 I got a Banana Pi M64, of which I was uncertain
> that the processor was the same as the one on a Raspberry Pi 3B. Still I
> did put the image for the Raspberry Pi 3B (aarch64) on a micro-SD card and
ymore.
My experiments with it will be continued, but if you have any advice I will be
happy to receive it.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op zondag 15 juli 2018 15:44:33 CEST schreef Stefan Brüns:
> On Sonntag, 15. Juli 2018 15:24:25 CEST Freek de Kruijf wrote:
> > Apparently there are images for Tumbleweed and Leap 15.0 for the Banana Pi
> > M2.
> >
> > Question: Are there also images for the Banana
Apparently there are images for Tumbleweed and Leap 15.0 for the Banana Pi M2.
Question: Are there also images for the Banana Pi M3 or should the images for
Raspberry Pi 3B also work for this device?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm
Op maandag 25 juni 2018 14:25:02 CEST schreef guillaume.gar...@free.fr:
> Hi,
>
> ----- Freek de Kruijf a écrit :
> > The question says it all!
> >
> > Is there any support for the Raspberry Pi Camera in an openSUSE image/
> > repository?
>
> I think
The question says it all!
Is there any support for the Raspberry Pi Camera in an openSUSE image/
repository?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Op donderdag 14 juni 2018 21:06:03 CEST schreef Freek de Kruijf:
> Op donderdag 14 juni 2018 17:56:41 CEST schreef Brüns, Stefan:
> > On Donnerstag, 14. Juni 2018 17:50:56 CEST Alexander Graf wrote:
> > > On 06/14/2018 05:43 PM, Freek de Kruijf wrote:
> > > > Op woens
Op donderdag 14 juni 2018 17:56:41 CEST schreef Brüns, Stefan:
> On Donnerstag, 14. Juni 2018 17:50:56 CEST Alexander Graf wrote:
> > On 06/14/2018 05:43 PM, Freek de Kruijf wrote:
> > > Op woensdag 13 juni 2018 15:58:25 CEST schreef Alexander Graf:
> > >> On 13.06.1
Op woensdag 13 juni 2018 15:58:25 CEST schreef Alexander Graf:
> On 13.06.18 14:27, Freek de Kruijf wrote:
> > I am using a Raspberry Pi 1B to count some pulses on one of the GPIO pins,
> > using Python script. This script runs fine on an older version of
> > Tumbleweed, name
.
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
this console
parameter in the boot command. This output does not appear.
How do I get this output and how do I get the ability to log in on this serial
line?
Bug report?
--
fr.gr.
member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner
1 - 100 of 310 matches
Mail list logo
