i was browsing an EclipseCon presentation[1] discussing
the business case of OEL when i noticed the ff line on
page 9 (out of 48):
...Blogosphere figured out instantly that they are using
CentOS
then after searching for a related link, i found an old
article[2] quoting one of the CEntOS
Lloyd Martin T. Yong writes:
I was able to successfully run the service even check if it could
resolve the hostnames with IP addresses... My only problem is i was it
can only resolve the names ips that are the servers listed on the
zonefile, i was hoping that the name server could
good pm,,
i already downloaded the firestarter-1.0.3 in edubuntu linux..
but the problem is where should i extract it? or do i need to extract?
what should i do?
thanks!
cheers!!!
_
Philippine Linux Users' Group (PLUG) Mailing List
Message-ID:
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Greetings!
I plan to buy an Acer laptop that comes pre-installed with Linux but
plan to replace the installed system with Kubuntu and unfortunately I
have no access to one right now.
Can somebody pls lend
is it a .deb package or a tar.gz or what?
or did you download it using aptitude or synaptic?
need more info po.
[oNIo]
On 3/13/07, luisito Trinidad [EMAIL PROTECTED] wrote:
good pm,,
i already downloaded the firestarter-1.0.3 in edubuntu linux..
but the problem is where should i extract it?
sir
na download ko po siya from sourceforge
i never use po the synaptic and adept
i already extract it to
/home/ins/firestarter-1.0.3.tar.gz
using terminal po!
On 3/13/07, Xunil User [EMAIL PROTECTED] wrote:
is it a .deb package or a tar.gz or what?
or did you download it using aptitude
On 3/13/07, luisito Trinidad [EMAIL PROTECTED] wrote:
good pm,,
i already downloaded the firestarter-1.0.3 in edubuntu linux..
but the problem is where should i extract it? or do i need to extract?
what should i do?
thanks!
cheers!!!
Not really a direct answer but it would be a lot
or if you insist on using the tar.gz package... find the executable
(mode +x) file in that directory and launch it! :) u may find a
config file from that directory... launch it using $ sudo ./config
then $sudo ./install
that's it...
On 3/13/07, david t. asuncion, jr. [EMAIL PROTECTED]
You have to build the binary executables from the source code.
I would normally do this as follows:
cd /home/ins
gzip -dc firestarter-1.0.3.tar.gz | tar xvf -
cd firestarter-1.0.3
./configure --prefix=/usr
make
su
make install
This will place the executable in /usr/bin, where it can be used by
On 3/13/07, luisito Trinidad [EMAIL PROTECTED] wrote:
good pm,,
i already downloaded the firestarter-1.0.3 in edubuntu linux..
but the problem is where should i extract it? or do i need to extract?
what should i do?
if the downloaded file is in the form tar.gz then you need to extract it
Is it possible to share a dialup connection between two *desktop*
computers running Linux using a pair of bluetooth transceivers?
Background: All I have is a dialup connection and two PCs that rarely
share files (the other computer isn't mine;). Because of the
configuration of the house (doors
On 3/13/07, Pablo Manalastas [EMAIL PROTECTED] wrote:
You have to build the binary executables from the source code.
I would normally do this as follows:
cd /home/ins
gzip -dc firestarter-1.0.3.tar.gz | tar xvf -
cd firestarter-1.0.3
./configure --prefix=/usr
Wouldn't --prefix=/usr/local be
On 3/12/07, Tiger Quimpo [EMAIL PROTECTED] wrote:
On Sun, 2007-03-11 at 19:06 -0700, Michael Tinsay wrote:
If they are using WinXP, lock it down, and don't give them admin
privileges.
Well after reading all your replies, it seems that I have already done what
you have suggested.
It is
as i have said in my earlier post, you may drop the packets
(behind the ISA/Squid servers) having any of the following
headers:
X-Forwarded-For , Via, HTTP 1.0,
which means that the HTTP session (before it passes thru
the ISA/Squid machines), is identified to be running via a
rogue web
sir david,
i already try by using sudo apt-get install firestarter but theres an error
/* Couldn't find package firestarter
thanks for the help1
On 3/13/07, david t. asuncion, jr. [EMAIL PROTECTED] wrote:
On 3/13/07, luisito Trinidad [EMAIL PROTECTED] wrote:
good pm,,
i already
you may need to update your repositories for you to download the app.
it may be that your current repository is pointed to an old version
of firestarter that has since been removed, hence, you can not
download it.
On 03 14, 07, at 7:56 AM, luisito Trinidad wrote:
sir david,
i already
sir cocoy,,
hows is that?
apt-get update po ba?
On 3/14/07, Cocoy Dayao [EMAIL PROTECTED] wrote:
you may need to update your repositories for you to download the app. it
may be that your current repository is pointed to an old version of
firestarter that has since been removed, hence, you
hehehe. honestly, i don't remember the exact command/apt-get
parameter... i haven't used ubuntu in over a year but i think yes
thats the command. or go to the gui and press reload/refresh. i do
know that you may have to refresh your repositories. sorry, i
couldn't be much help.
On
its ok sir!
iam using edubuntu.. i cannot configure it out how to use firestarter..
this is my first time using it!
just a fresh 4th year
hehehe...
On 3/14/07, Cocoy Dayao [EMAIL PROTECTED] wrote:
hehehe. honestly, i don't remember the exact command/apt-get parameter...
i haven't used
On 3/14/07, luisito Trinidad [EMAIL PROTECTED] wrote:
iam using edubuntu.. i cannot configure it out how to use firestarter..
this is my first time using it!
quote
Ubuntu users can install Firestarter by enabling the universe
repository in the /etc/apt/sources.list file or in synaptic under
hi guys,
i need your expertise and experience here. how can i make my voip system
secure. i found these things.
SRTP
TLS
via VPN
what do you think is the best solution and easier to implement. I still reading
more about asterisk.
tia
JCB
Registered Linux
This is on top of Oracle's ADF Faces project, which has been donated
to the Apache Foundation.
Oracle Proposes Open Source Persistence Project at Eclipse Foundation
Oracle, a newly appointed Eclipse Foundation Board Member and
Strategic Developer – the highest level of membership -- announced
- Original Message -
From: List Mail [EMAIL PROTECTED]
To: Philippine Linux Users' Group (PLUG) Technical Discussion List
plug@lists.linux.org.ph
Sent: Wednesday, March 14, 2007 1:59 AM
Subject: [plug] Sharing desktop dialup connection via bluetooth
Is it possible to share a dialup
On 3/14/07, luisito Trinidad [EMAIL PROTECTED] wrote:
sir david,
i already try by using sudo apt-get install firestarter but theres an
error
/* Couldn't find package firestarter
You have to enable the Universe repository by editing your
/etc/apt/sources.list file by doing a sudo gedit
helo gurus,
i have a postfix setup here and running perfectly. i just want to ask if how
can i configure it for my clients to use it as an smtp relay. they have this
mail server and they want to use my server as relay. do i have to setup
accounts for these?
thanks.
still a newbie
[EMAIL PROTECTED]@cus [EMAIL PROTECTED] wrote: helo gurus,
i have a postfix setup here and running perfectly. i just want to ask if how
can i configure it for my clients to use it as an smtp relay. they have this
mail server and they want to use my server as relay. do i have to setup
Below is a link of a good presentation slides about the Open Source
Business Models.
- http://stephesblog.blogs.com/presentations/BrentWilliamsEclipseConV02.pdf
FYI.
_
Philippine Linux Users' Group (PLUG) Mailing List
plug@lists.linux.org.ph
thanks. very useful.
On 03 14, 07, at 9:52 AM, Marvin T. Pascual wrote:
Below is a link of a good presentation slides about the Open Source
Business Models.
- http://stephesblog.blogs.com/presentations/
BrentWilliamsEclipseConV02.pdf
FYI.
_
we can refine these models as we adopt in to our own needs. great post
sir marvin!
- Elmer Claveria
On 3/14/07, Marvin T. Pascual [EMAIL PROTECTED] wrote:
Below is a link of a good presentation slides about the Open Source
Business Models.
-
Backgrounder:
We are using Debian for our apache web server with phpmyadmin and mysql.
Currently we are hosting more than 20 web sites, mostly using mambo and
joomla web content management systems.
At present we have a bandwidth of 1.5 Mbps leased line from Innove.
My Question:
What is the
On 3/14/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Backgrounder:
We are using Debian for our apache web server with phpmyadmin and mysql.
Currently we are hosting more than 20 web sites, mostly using mambo and
joomla web content management systems.
At present we have a bandwidth of 1.5 Mbps
hi!
considering to replace an existing samba pdc server. got several
concerns in mind:
1. is it possible to copy user accounts and passwords from the old
server to the new one?
2. can you duplicate the sid so that profiles for win2000 up computers
will not be recreated?
any tips from
Hello, Joey:
On 3/14/07, Joey S. Eisma [EMAIL PROTECTED] wrote:
considering to replace an existing samba pdc server. got several
concerns in mind:
1. is it possible to copy user accounts and passwords from the old
server to the new one?
Consider the following:
1. Use pwunconv and grpunconv.
Guys! need some help.
I recent created a presentation using open office, in my surprise when i
open it using a MS office power point almost all of the animations
effects that i've used didn't shown properly.
is there any work around with this issue?
thanks!
--
Lloyd Martin Yong
Network
Message: 1
Date: Mon, 12 Mar 2007 22:12:26 -0700 (PDT)
From: Michael Tinsay [EMAIL PROTECTED]
Subject: Re: [plug] Bind DNS not caching?
To: Philippine Linux Users' Group (PLUG) Technical Discussion List
plug@lists.linux.org.ph
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain;
Hi Lloyd,
What OOo version are you using? I guess that version 2.0 at least should
generate 'less' conversion problems.
And can you please state clearly what effects and animations were actually
not reflected in the .ppt version? I'm asking just for everybody's info.
Dong
On 3/14/07, Lloyd
On Tue, 13 Mar 2007 17:17:26 +0800
Lloyd Martin T. Yong [EMAIL PROTECTED] wrote:
i think it would be nice din but i think matching the IP address with
the specific MAC address would be a difficult task.
So how do you make IP address assigments for your workstations? It
seems that you're not
I recent created a presentation using open office, in my surprise when i
open it using a MS office power point almost all of the animations
effects that i've used didn't shown properly.
is there any work around with this issue?
Yes. Do not use Powerpoint to run the slideshow. Use
Sabi ni Holden noong Wed, Mar 14, 2007 at 2:42 PM:
Yes. Do not use Powerpoint to run the slideshow. Use OpenOffice.
Use a laptop with OO installed or download OO for Windows and put it
on your USB drive. Install it in the PCs you will be using for the
slide show. Its free and you help
39 matches
Mail list logo
