Hello everyone. I've installed SB app in my TV box Strong Leap S1. I can
see Server name, and its IP. Once I try to connect, after a while I get
the message unable to connect. Server side no player shows up. I've
tried it with Ethernet and Wi-Fi connection. I've already done the
infinite retry
Man in a van wrote:
> If it's that high (it made the BBC news today :p) you should be
> swimming
>
> Dogs love a swim ;)
>
> ronnie
Its funny, BBC, national news in the US, etc...but it happens so
frequently (every few years) us locals stock up on beer and groceries,
shrug shoulders, and
Redrum wrote:
> It should, it's the walking that's hard, Ronnie. Especially if it's up
> to your chest. Its even harder for my dog. :)
>
> Jim
If it's that high (it made the BBC news today :p) you should be swimming
Dogs love a swim ;)
ronnie
Man in a van wrote:
> Jim. does it work in the snow ?
>
> ronnie
It should, it's the walking that's hard, Ronnie. Especially if it's up
to your chest. Its even harder for my dog. :)
Jim
Redrum's Profile:
Redrum wrote:
> exactly why I have it. I use my phone in my pocket and a set of
> bluetooth buds while I wander around within wifi range indoor and out.
> The other point that Paul makes is a good one, when you wander in and
> out of audible range of your players. Especially with podcasts. I
bunkertoy wrote:
> Thanks for the clarity. Not sure why I purchased SB Player then ?
> Considering I have a Transporter & Duet. this SB Player is totally
> redundant. Learning experience.
> CheersMy router allows me to use openvpn so I can use LMS anywhere. I haven't
yet but I could [emoji3]
I
Paul Webster wrote:
> So you can listen around the home & garden (if lucky enough to have one)
> wherever you have WiFi coverage but are too far away from your fixed
> position players.
exactly why I have it. I use my phone in my pocket and a set of
bluetooth buds while I wander around within
bunkertoy wrote:
> Thanks for the clarity. Not sure why I purchased SB Player then ?
> Considering I have a Transporter & Duet. this SB Player is totally
> redundant. Learning experience.
> Cheers
So you can listen around the home & garden (if lucky enough to have one)
wherever you have WiFi
Paul Webster wrote:
> LMS is designed for use within a local LAN - not for remote access.
>
> However, if you can get safe remote access to your LAN then it can
> work.
> The "classic" way to achieve this was to run a VPN server on your home
> network and then access that.
> However, a
bunkertoy wrote:
> HI All,
> I see lots of chat about SB Player. I can't find the beginners guide to
> managing it.
> I have the squeeze ctrl app. Can you confirm I can use the SB Player app
> to access my home LMS server ? So if I'm out and about I can use SB
> Player to listen to music on my
LMS is designed for use within a local LAN - not for remote access.
However, if you can get safe remote access to your LAN then it can
work.
The "classic" way to achieve this was to run a VPN server on your home
network and then access that.
However, a potentially easier thing to do is to use
HI All,
I see lots of chat about SB Player. I can't find the beginners guide to
managing it.
I have the squeeze ctrl app. Can you confirm I can use the SB Player app
to access my home LMS server ? So if I'm out and about I can use SB
Player to listen to music on my phone ?
As soon as I
With a model number we might be able to find a manual.
Otherwise look for anything related to the aspect ratio, zoom, stretch,
fit there might be a setting to say that it is a computer that is
connecting.
Or ... you might be unlucky and have an old model that does not have a
setting for it
The TV is 1080p; but old (Samsung Plasma). What should I check re.
settings ? Thanks for your help.
chrisinparis's Profile: http://forums.slimdevices.com/member.php?userid=11963
View this thread:
Is overscanning enabled on the TV?
https://en.wikipedia.org/wiki/Overscan
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc
australia and cbc/radio-canada
and, via the extra \"radio now playing\"
The app works very well; however it does not display too well on my TV.
What is the issue?
38754
+---+
|Filename: IMG_3925-smaller.jpg |
|Download:
galgofa wrote:
> Can you please explain how this player works ? I got only server
> connection setting, i add the server and push connect, it is light green
> and goes connected, then happens nothing. I don't have any player as on
> the pictures above, also there no choice to share link in to
galgofa wrote:
> Can you please explain how this player works ? I got only server
> connection setting, i add the server and push connect, it is light green
> and goes connected, then happens nothing. I don't have any player as on
> the pictures above, also there no choice to share link in to
kidstypike wrote:
> Yes, no problem.
>
> 36009
Can you please explain how this player works ? I got only server
connection setting, i add the server and push connect, it is light green
and goes connected, then happens nothing. I don't have any player as on
the pictures above, also there no
kidstypike wrote:
> Thanks @bpa, I didn't know about that setting. See also -
> https://forums.slimdevices.com/showthread.php?113045-Announce-BBC-Sounds-Plugin=1036669=1#post1036669Alternatively,
> you can also enable 'Emulate 192Khz' in SB Player. This
way LMS will think SB Player can handle
bpa wrote:
> Just to understand setup what is the BBC Sounds setting
> >
Code:
> >
> Hide the audio sample rate from LMS. This can help with a specific
transcoding issue on devices that can't natively support 48000
>
> >
Thanks @bpa, I
kidstypike wrote:
> Seeing the same - Unsupported sample rate.
Just to understand setup what is the BBC Sounds setting
Code:
Hide the audio sample rate from LMS. This can help with a specific
transcoding issue on devices that can't natively support 48000
bpa wrote:
> Can the SBplayer play other station and audio files OK ?
>
> In particular can the player play a AAC internet stream such as
> http://somafm.com/illstreet32.pls
Yes, no problem.
36009
+---+
|Filename: soma.jpg
bpa wrote:
> Can the SBplayer play other station and audio files OK ?
>
> In particular can the player play a AAC internet stream such as
> http://somafm.com/illstreet32.pls
I tried with Squeezeplayer so a different Android player. Somafm plays
with no transcoding but BBC Sounds gets
hopeful wrote:
> Not sure if this is a BBC Sounds problem or an SBPlayer one?
> With SBPlayer selected as the player in LMS, nothing will play from the
> BBC Sounds plugin.
Seeing the same - Unsupported sample rate.
36007
+---+
hopeful wrote:
> Not sure if this is a BBC Sounds problem or an SBPlayer one?
> With SBPlayer selected as the player in LMS, nothing will play from the
> BBC Sounds plugin.
Can the SBplayer play other station and audio files OK ?
In particular can the player play a AAC internet stream such as
Not sure if this is a BBC Sounds problem or an SBPlayer one?
With SBPlayer selected as the player in LMS, nothing will play from the
BBC Sounds plugin.
hopeful's Profile:
Murdock wrote:
> I thought SB Player could play WMA natively.
> My LMS works on Linux. I'll see what I can do for the transcoding.
>
> Thank you for your answer.
Install ffmpeg and PlayWMA plugin.
bpa's Profile:
Murdock wrote:
> I thought SB Player could play WMA natively.
> My LMS works on Linux. I'll see what I can do for the transcoding.
>
> Thank you for your answer.
No, WMA is the one format SB Player can't play. It's mainly because
there are no Java based decoding libraries for WMA.
bpa wrote:
> WMA transcoding would be done by LMS. The solution depends on the LMS
> system and the host OS.
I thought SB Player could play WMA natively.
My LMS works on Linux. I'll see what I can do for the transcoding.
Thank you for your answer.
Murdock wrote:
> Hi all,
>
> I am using SB Player on android TV and am very satisfied with it. I just
> have a problem playing WMA files. I realize that they read well on my
> raspberry (piCorePlayer) but not at all through SB Player.
> Does anyone have a solution?
WMA transcoding would be
Hi all,
I am using SB Player on android TV and am very satisfied with it. I just
have a problem playing WMA files. I realize that they read well on my
raspberry (piCorePlayer) but not at all through SB Player.
Does anyone have a solution?
Thank you.
ButC wrote:
> Any chance you will add support for bluetooth controls to SB Player?No.
> Bluetooth support requires there to be controls to begin with. SB
Player has none and will never have controls.
Sent from my Pixel 3 using Tapatalk
--
Squeezebox apps for webOS, Android and
wt0 wrote:
> That depends on the controller app you use. If you're using Squeeze
> Ctrl, you can enable media controls in preferences.
>
> Sent from my Pixel 3 using Tapatalk
Any chance you will add support for bluetooth controls to SB Player?
//Johan
Windows 10
LMS 8.0
Local Player
wt0 wrote:
> That depends on the controller app you use. If you're using Squeeze
> Ctrl, you can enable media controls in preferences.
>
> Sent from my Pixel 3 using Tapatalk
The thought was to be able to use Material skin or the Material app. The
creator of Material said my best bet was to
ButC wrote:
> I've gotten addicted to skipping songs from my bluetooth headphones. Is
> there a way to achieve that when using SB Player 2?That depends on the
> controller app you use. If you're using Squeeze
Ctrl, you can enable media controls in preferences.
Sent from my Pixel 3 using
I've gotten addicted to skipping songs from my bluetooth headphones. Is
there a way to achieve that when using SB Player 2?
//Johan
Windows 10
LMS 7.9.4
Local Player Plugin (Squeezelite)
Intel Compute Stick
ButC's
T-bird wrote:
> New phone and get problem then installing SB Player.
>
> Phone is an Galaxy S20 running Android 10 and One UI 2.1
>
> Start the app and get this
>
> 30148
>
>
> Pressing that I comes here
>
> 30149
>
> As you can see nothing about SB Player so don't know what to do, so
>
THX hadn't noticed the arrow down, all is good now
1 x Touch
1 x Radio
Logitech Media Server Version: 8.0.0 - 1586752615 @ Mon Apr 13 06:54:40
CEST 2020
Castbridge with 2 x Harman Kardon Citation One, setup as a stereo pair
Squeeze Ctrl
Squeeze Player
Phone: Samsung Galaxy S 20
You have to change the drop-down box to show all the apps, and then
disable batt optimisation for SB Player.
mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread:
New phone and get problem then installing SB Player.
Phone is an Galaxy S20 running Android 10 and One UI 2.1
Start the app and get this
30148
Pressing that I comes here
30149
As you can see nothing about SB Player so don't know what to do, so
backing out.
Now the app is hanging so have
mr-b wrote:
> Hi
>
> I'm just trying out SB Player for the first time and the volume seems to
> reduce by half after a few seconds after I've first connected the player
> to the server.
> Any ideas what is wrong?
Try turning off "Use Device Volume".
--
Squeezebox apps for
Hi
I'm just trying out SB Player for the first time and the volume seems to
reduce by half after a few seconds after I've first connected the player
to the server.
Any ideas what is wrong?
mr-b's Profile:
What encoding?jstraw wrote:
> Is there a fix for 48k-sampled files. OrangeSqueeze/Squeezeplayer will
> play them, Squeeze Ctrl/SB Player will not. Is there a setting I need to
> change in SB Player?
Sent from my Pixel 3 using Tapatalk
--
Squeezebox apps for webOS, Android and
Is there a fix for 48k-sampled files. OrangeSqueeze/Squeezeplayer will
play them, Squeeze Ctrl/SB Player will not. Is there a setting I need to
change in SB Player?
jstraw's Profile:
Harald654 wrote:
> great,
> with the update it works now :)
> big thanks!
>
> Do you also accept future requests here?
> I wanted to ask if it would be possible to integrate HDMI-CEC support
> into your app?
> Background is that I have all my android-devices (with SB player)
> connected via
Paul Webster wrote:
> Ece = cec ?
Oh, yes of course i mean cec.
thanks, i've corrected it.
Harald654's Profile: http://forums.slimdevices.com/member.php?userid=66319
View this thread:
Ece = cec ?
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105
View this thread:
wt0 wrote:
> Alright, fixed it. Turns out Android 8.0 (Oreo) required some minor
> changes in the app to launch at boot. You should see an update soon.
great,
with the update it works now :)
big thanks!
Do you also accept future request here?
I wanted to ask if it would be possible to
Harald654 wrote:
> Thank you for taking care of that.
> For another app on my shield (Teamviewer Host) the autostart works after
> a reboot. So it seems to be possible in principle.
> If I can help you solve the problem let me know :)
Alright, fixed it. Turns out Android 8.0 (Oreo) required
wt0 wrote:
> I'll have to check, but it's likely that Android TV doesn't allow apps
> to auto launch at boot. The whole Android TV experience seems to be
> designed around the Home screen so it won't surprise me if this was the
> case.
>
> Sent from my Pixel 3 using Tapatalk
Thank you for
RonM wrote:
> I don't use SBPlayer a whole lot, although it's far and away my fave for
> my Android players, so hadn't noticed until this evening that the tracks
> are playing pretty much continuously with no gap. While this is
> desirable for some albums, it's not for others.
>
> Is it
Harald654 wrote:
> Hello,
> I use the SB Player on a Nvidia Shield and it works great until the
> Autostart after a reboot.
> I have enabled "launch when device start" and "always connect" but the
> app does not start after a reboot. I change all parameters (like "auto
> connect delay") with no
Hello,
I use the SB Player on a Nvidia Shield and it works great until the
Autostart after a reboot.
I have enabled "launch when device start" and "always connect" but the
app does not start after a reboot. I change all parameters (like "auto
connect delay") with no effect. If I startet the app
RonM wrote:
> I don't use SBPlayer a whole lot, although it's far and away my fave for
> my Android players, so hadn't noticed until this evening that the tracks
> are playing pretty much continuously with no gap. While this is
> desirable for some albums, it's not for others.
>
> Is it
I don't use SBPlayer a whole lot, although it's far and away my fave for
my Android players, so hadn't noticed until this evening that the tracks
are playing pretty much continuously with no gap. While this is
desirable for some albums, it's not for others.
Is it possible to control this
ynot1234567890 wrote:
> With SB Player 1.4.4 getting an audio click between songs. tried fade
> in, fade out, cross fade, etc.. to no avail. Running Android 7.1.2 TV
> version. Using optical output and viper4android to enhance the sound
> quality. The click doesn't seem to happen with UPNP
With SB Player 1.4.4 getting an audio click between songs. tried fade
in, fade out, cross fade, etc.. to no avail. Running Android 7.1.2 TV
version. Using optical output and viper4android to enhance the sound
quality. The click doesn't seem to happen with UPNP type players
(bubbleupnp, sonos,
jpoet wrote:
> How well does this work on a nVidia Shield?
> Can you leave it running in the background 24/7 and just "use it"
> whenever you want, or do you have to start it up each time?
> Can it be used with the TV off?
>
> My SB Receiver recently died, so I am considering options. I have
>
kllngtme wrote:
> First off, thank you so much for the app! It's great to finally have a
> squeezebox player hooked up to my TV (via a Nvidia Shield Android TV).
>
> It works great! I have one question though in regards to this player
> being on such a beefy piece of hardware. Is it possible to
I've a Chromebook with Android app support. Anyone got SB player running
on a Chromebook. Problem is the connection with the wifi.
LMS (latest nightly) on Windows Home Server 2011 & Raspberry
PiCoreplayer
Squeexebox Touch
Squeezebox Boom
Squeezebox Radio (3)
Squeezebox Classic
Picoreplayer's &
stban1983 wrote:
> hi guys,
> i recently bought SB Player for using it on my android TV Box.
>
> My problem:
> When i wake my box, SB Player seems to not running, i can't see it as a
> squeezebox player in Squeeze control. I ve got to launch it ( so turn on
> the tv etc...)
> Yet i check the
hi guys,
i recently bought SB Player for using it on my android TV Box.
My problem:
When i wake my box, SB Player seems to not running, i can't see it as a
squeezebox player in Squeeze control. I ve got to launch it ( so turn on
the tv etc...)
Yet i check the "running background box"
is there a
Hydro wrote:
> Hi
>
> Does this app support CLI connect and disconnect command ? I want to be
> able to change my LMS server without playing with app settings.
Yes.
Sent from my Pixel using Tapatalk
--
Squeezebox apps for webOS, Android and Windows Phone,
Hi
Does this app support CLI connect and disconnect command ? I want to be
able to change my LMS server without playing with app settings.
Hydro's Profile: http://forums.slimdevices.com/member.php?userid=62726
View this
RonM wrote:
> Well, given that the mobile plays the file just fine on its own, that
> Squeeze Player does too, and SB Player doesn't, it seems it really is
> down to SBP.
>
> In the total scheme of things it is a minor annoyance, but an annoyance
> nonetheless.
>
> R.
Just tried the files
wt0 wrote:
> It still could be the mobile since Squeeze Player may use a different
> decoder. I know it uses a separate native code decoder for some
> formats, but I'm not sure if it uses that for mp3 instead of the
> system's built-in decoder.
>
> Sent from my Pixel using Tapatalk
Well,
RonM wrote:
> More evidence. Squeeze Player, which I hadn't used for a very long time
> because SBPis generally better, played the 48kHz files just fine. So
> the problem is NOT the mobile.
>
> R.
It still could be the mobile since Squeeze Player may use a different
decoder. I know it
RonM wrote:
> I'd temporarily forgotten this issue and was looking forward to
> listening to jazz guitarist Mary Halvorsen. No go. Same prob with 48kHz
> files. Definitely SBP. Bummer.
More evidence. Squeeze Player, which I hadn't used for a very long time
because SBPis generally better,
RonM wrote:
> This is not the case. I loaded the 48khz files onto the mobile, and
> played with a local app. They worked just fine.
>
> So, to recap, I have some files with a 48khz sampling rate (most of my
> many thousands of files are 44.1, with a few at 96, some at odd rates;
> the
wt0 wrote:
> It's possible that Squeeze Player uses it's own decoder instead of the
> device's. A better test would be to copy the file to the device and see
> the built-in music player will play it.
>
> Sent from my Pixel using Tapatalk
This is not the case. I loaded the 48khz files onto the
RonM wrote:
> SBP reports that the default sampling rate for the device is 48khz.
That just means that the device's hardware DAC natively runs at 48khz.
It has no effect on what format SBP can decode. It just indicates that
no matter what sampling rate the PCM audio fed into system is,
wt0 wrote:
> Technically any software player should be able to support it, but they
> are not suppose to because Logitech doesn't like it since you're using
> their resources (their servers and bandwidth) with something they didn't
> sell. By now they probably don't really care anymore, but just
wt0 wrote:
> It's possible that Squeeze Player uses it's own decoder instead of the
> device's. A better test would be to copy the file to the device and see
> the built-in music player will play it.
>
> Sent from my Pixel using Tapatalk
I'll try that as soon as I get around to it, but I
RonM wrote:
> That's not the problem. I just tried Squeeze Player on my mobile, which
> I forgot I had installed, and it worked fine with the 48kHz files. I
> prefer SBP, but at least I have a backup for the problem files.
>
> R
It's possible that Squeeze Player uses it's own decoder instead
wt0 wrote:
> The only thing I can think of is if the mp3 decoder of your phone
> doesn't support that particular format.
>
> Sent from my Pixel using Tapatalk
That's not the problem. I just tried Squeeze Player on my mobile, which
I forgot I had installed, and it worked fine with the 48kHz
RonM wrote:
> Hmm. Very odd. I'm using 7.9 and have never tweaked those settings in
> any version. I didn't change any default settings on SBP when I
> installed it. All other sample rates work fine on SBP, and all sample
> rates (including 48) work fine on other players, including the
wt0 wrote:
> Ok, just tried the files you sent with the current version of SB Player
> in the Play store and everything worked fine, no errors. I enabled
> Emulate 192Khz and set the Output Sample Rate to 44100.
>
> I'm using LMS 7.9
>
> Check your custom-convert.conf or convert.conf on your
RonM wrote:
> Some additional info.
>
> My mobile has a Qualcom 2.5 ghz quad core processor (Experia V3
> Compact). SBP easily accommodates my few 96 khz files, but chokes on 48,
> reporting an unsupported sample rate.
>
> In SBP settings, it's reported that the native sampling rate of the
>
satkinsn wrote:
> Early on, they both run really well, and since I use mysqueezebox.com
> rather than a local server, I'm delighted the player supports it.
Technically any software player should be able to support it, but they
are not suppose to because Logitech doesn't like it since you're
Just wanted to thank you for your Android controller app and especially
the player. I've always used OrangeSqueeze (or the native Logitech app
on very old devices), but it's not behaving well on my new Galaxy S7, so
I bought your controller and then, for fun, the player. Early on, they
both run
RonM wrote:
> Some additional info.
>
> My mobile has a Qualcom 2.5 ghz quad core processor (Experia V3
> Compact). SBP easily accommodates my few 96 khz files, but chokes on 48,
> reporting an unsupported sample rate.
>
> In SBP settings, it's reported that the native sampling rate of the
>
RonM wrote:
> Some additional info.
>
> My mobile has a Qualcom 2.5 ghz quad core processor (Experia V3
> Compact). SBP easily accommodates my few 96 khz files, but chokes on 48,
> reporting an unsupported sample rate.
>
> In SBP settings, it's reported that the native sampling rate of the
>
Some additional info.
My mobile has a Qualcom 2.5 ghz quad core processor (Experia V3
Compact). SBP easily accommodates my few 96 khz files, but chokes on 48,
reporting an unsupported sample rate.
In SBP settings, it's reported that the native sampling rate of the
device is 48; since almost all
RonM wrote:
> I've been trying to play some recent eMusic downloads. A number of these
> have sample rates at 48kHz, and it seems SBPlayer doesn't support that.
> Hence the message "unsupported sample rate" when I try to play on my
> Android mobile.
>
> Any solution other than downsampling?
I've been trying to play some recent eMusic downloads. A number of these
have sample rates at 48kHz, and it seems SBPlayer doesn't support that.
Hence the message "unsupported sample rate" when I try to play on my
Android mobile.
Any solution other than downsampling?
LMS on a dedicated
wt0 wrote:
> Squeeze Player uses the Android NDK to do it's decoding and resampling
> in native code, hence it's able to run faster on pre Android 5.0
> devices. Using the NDK gives you speed but not every class of Android
> device supports the NDK. I wanted SB Player to support as many devices
expectingtofly wrote:
> Thank you for your reply.
> I'm running a raspberry pi as the server. Alas, there is not an update
> to the Avy to bring it to Android 5.0.
> I tried every combination to get it to work, but with no joy. In the
> end I purchased 'squeezeplayer'
>
wt0 wrote:
> Make sure Emulate 192Khz is disabled. With that setting off, the app
> will report whatever the Output sampling rate is to the server when it
> first connects. So if you change that setting, you need to disconnect
> and reconnect.
>
> Also, make sure your server is setup to
expectingtofly wrote:
> I'm using the superb SB Player and Squeeze control to turn my Zettaly
> Avy Smart speaker http://www.zettaly.com/ into a squeezebox radio.
>
> However, I am encountering an issue with 48000 sample rate streams (such
> as the BBC radio streams). SB Player provides two
expectingtofly wrote:
> I'm using the superb SB Player and Squeeze control to turn my Zettaly
> Avy Smart speaker http://www.zettaly.com/ into a squeezebox radio.
>
> However, I am encountering an issue with 48000 sample rate streams (such
> as the BBC radio streams). SB Player provides two
I'm using the superb SB Player and Squeeze control to turn my Zettaly
Avy Smart speaker http://www.zettaly.com/ into a squeezebox radio.
However, I am encountering an issue with 48000 sample rate streams (such
as the BBC radio streams). SB Player provides two options for the
output sample on
It's been up and running completely unattended for a couple of days
now.
Thanks for fixing it.
mruddo's Profile: http://forums.slimdevices.com/member.php?userid=65325
View this thread:
wt0 wrote:
> Thank you for doing the tests. I figured out why it's always 6 times.
> It's a simple typo on my part. I'm saving the preference as "maxRety"
> and reading it back as "maxRetry". The default is 5 (that doesn't
> include the first connection).
Glad it helped to identify the issue
mruddo wrote:
> Thanks for getting back to me... I've checked the Wifi settings, and it
> should be on all the time - on both the S3 and the Nexus. What I've
> noticed is that "infinite" (or indeed any other number for that matter)
> shows the same behaviour in the debug log:
>
> UNABLE TO
Thanks for getting back to me... I've checked the Wifi settings, and it
should be on all the time - on both the S3 and the Nexus. What I've
noticed is that "infinite" (or indeed any other number for that matter)
shows the same behaviour in the debug log:
UNABLE TO CONNECT TO SERVER
Hi wt0,
I'm trying to use the app in my daughter's bedroom - they key point
there being that I'd like it to be plugged in and out of reach and just
available as and when required.
I've configured it, and it runs perfectly when connected, but if for any
reason the server goes down for any length
mruddo wrote:
> Hi wt0,
>
> I'm trying to use the app in my daughter's bedroom - they key point
> there being that I'd like it to be plugged in and out of reach and just
> available as and when required.
>
> I've configured it, and it runs perfectly when connected, but if for any
> reason the
poing wrote:
> There's EAC (exactaudiocopy.de). I has an option to copy an image and
> create a .cue sheet. You can embed the .cue either via the command line
> using metaflac. Alternatively, foobar2000 can embed cue sheets as well.
> And, of course, there's cuetools.
>
>
> So the CD I ripped
kllngtme wrote:
> Not sure how relevant it is or how easy it would be to work with the
> developer but I guess Kodi Media player can use this app(projectM Music
> Visualizer) as a plugin for visualizations on Android. Maybe it'd be
> possible with help from that app?
>
> My idea stemmed from
1 - 100 of 346 matches
Mail list logo