Hi,
In the office here we all run dual Dell 2000FP LCD panels an absolute
bargain considering the size and spec (1600x1200 pixels, CVBS in, DVI in, YC
in). All set at 1600 x 1200 and they are fantastic. For graphics cards we
have gone with an Nvidia card that has dual DVI output, we found the
$800 not bad for
1600x1200 with VGA, DVI, SVIDEO and composite video inputs.
-Original Message-
From: Matt Pobursky [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 05, 2004 12:27 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Multiple Displays
On Thu, 05 Aug 2004 11:53:56 -0700, Jim
Not if you operate on multiple instances... (hint)
-Original Message-
From: Brian Guralnick [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 05, 2004 9:42 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Multiple Displays
Note about using different resolutions on each monitor
Thanks everybody for your comments and recommendations regarding multiple
displays. Now feel confident enough to make some purchasing decisions.
JM
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
*
I've got a matrox parhelia with two seventeen inch tft displays at
1280*1024. works great. I generally have the panels open all of the time on
the second monitor, main workspace on the primary. Different resolutions
should be fine as long as your gfx card doesn't 'stretch' the display across
the
Jim Monroe wrote:
1. Is this a good strategy?
Having a second monitor is very helpful, to the point that you will have
a very hard time going back to a single monitor setup.
2. Is my proposed mix of CRT and flat panel even feasible, and can the
flat panel be set for a lower resolution than the
On Thu, 05 Aug 2004 11:53:56 -0700, Jim Monroe wrote:
I'm getting ready to add a second monitor for use with DXP04 running
on Win2k.
I'm hoping those with experience can guide me in the right direction.
I'm thinking about adding a 15 or 17 inch flat panel as the secondary
display to my 21
On Thu, 5 Aug 2004 20:19:41 +0100, Rich Thompson wrote:
I've got a matrox parhelia with two seventeen inch tft displays at
1280*1024. works great. I generally have the panels open all of the
time on the second monitor, main workspace on the primary. Different
resolutions should be fine as
My son uses his HP ZD7000 with the internal Nvidia graphics in a dual
monitor mode with 2 different resolutions and it works fine. We find dual
monitors very handy.
At 02:26 PM 8/5/04 -0500, you wrote:
On Thu, 05 Aug 2004 11:53:56 -0700, Jim Monroe wrote:
I'm getting ready to add a second
Jim,
Yes, but you have to make sure that the video card and associated
drivers are capable of handling the mixed load. Nvidia's hardware and
software provide these capabilities with issue and are in general quite
affordable, and no, I don't really care about Matrox, since it's such a
crappy
to rant
later
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, August 05, 2004 4:11 PM
Subject: Re: [PEDA] Multiple Displays
Two 21 CRT both running at 2048x1536 works really well. But
you need a
large desk space, a large wallet and similar setup
monitor, rather than centred between the two.
What a pain that is.
Take Care
Rich
-Original Message-
From: Matt Pobursky [mailto:[EMAIL PROTECTED]
Sent: 05 August 2004 21:07
To: Protel EDA Forum
Subject: Re: [PEDA] Multiple Displays
On Thu, 5 Aug 2004 20:19:41 +0100, Rich Thompson wrote
on the designated monitor, rather than
centred between the two. What a pain that is.
Take Care
Rich
-Original Message- From: Matt Pobursky
[mailto:[EMAIL PROTECTED] Sent: 05 August 2004 21:07 To:
Protel EDA Forum Subject: Re: [PEDA] Multiple Displays
On Thu, 5 Aug 2004 20:19:41
PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, 6 August 2004 5:55 AM
To: [EMAIL PROTECTED]
Subject: Re: [PEDA] Multiple Displays
Jim,
Yes, but you have to make sure that the video card and associated
drivers are capable of handling the mixed load. Nvidia's hardware and
software provide
-Original Message-
From: Jim Monroe [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 05, 2004 7:54 PM
To: Protel EDA Forum
Subject: [PEDA] Multiple Displays
I'm getting ready to add a second monitor for use with DXP04
running on Win2k.
I'm hoping those with experience can
AM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Multiple Displays
-Original Message-
From: Jim Monroe [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 05, 2004 7:54 PM
To: Protel EDA Forum
Subject: [PEDA] Multiple Displays
I'm getting ready to add a second monitor for use with DXP04
16 matches
Mail list logo