On Thu, 21 Sep 2017 09:19:10 +0200, Giorgio Garabello via Ql-Users wrote:
> QMenu 7.66 has a lot of problem, ink color in view_file remains always
> black, extension filter don't work and some other problems... Qmenu 8,
> works well..
Yes, v7.66 is buggy, but v8 is not much better...
In my
On Sat, 19 May 2018 11:06:08 +0200, Wolf via Ql-Users wrote:
> Hi,
>
> I've also re-uploaded the source code.
Thank you !
___
QL-Users Mailing List
On Thu, 17 May 2018 06:12:44 +0200, Wolf via Ql-Users wrote:
> Hi,
>
> thanks Thierry and Marcel for pointig this out.
>
> Re-uploaded with thr missing chunk inserted.
I am sorry, but the SMSQ/E v3.33 source file archive
(http://www.wlenerz.com/smsqe/333/smsqe333.zip)
is always the same, and
On Sat, 12 May 2018 06:48:27 +0200, Wolf via Ql-Users wrote:
> Hi all,
>
> I re-upped the binaries zip file for SMSQ/E, the Aurora & QXL problems
> should be gone now.
I am faced with a problem in v3.33: the "WMAN system colours" config block
is gone (!) and as a result, most of PE programs
On Mon, 21 May 2018 00:41:47 +0200, Davide Santachiara via Ql-Users wrote:
> While it seems with my old SMSQ 2.90 I managed to run SMSQ under the Windows
> 98 DOS (i.e. starting DOS inside W98, which allowed with ALT TAB to move to
> Windows back and forth),
Bad idea... I never ran my QXL from
On Tue, 1 May 2018 19:26:56 +0200, Peter Graf via Ql-Users wrote:
> Most flatscreens misunderstand the signal as 800x600, leading to bad
> interpolation.
Among the 3 LCD monitors I own, only the latest is able to (badly) sync
the Q60 video signal and it does as if it would be a 640x480 VGA mode
On Sun, 9 Feb 2020 09:16:58 +0100, Tobias Fröschle via Ql-Users wrote:
> that sounds like a corrupt file system on the web server.
No, the success after renaming shows without possible doubt that the
file is not corrupt on the server.
However, I suspect that the site goes through a CDN (which
On Fri, 7 Feb 2020 07:04:44 +0100, Wolfgang Lenerz via Ql-Users wrote:
> SMSQ/E 3.35 is out now (wlenerz.com/smsqe).
When trying to unzip the archive I downloaded from your site (several
times, from both a browser with cleared cache and with curl & wget), I
get:
Archive: smsqe335.zip
warning
On Tue, 14 Jan 2020 01:16:14 +0100, Peter Graf via Ql-Users wrote:
> Many thanks for taking a highres picture. It is nice to get the screen
> filled, still single pixels can not be distinguished in every area. The
> picture is significantly clearer on my 1024x768 monitor using the "black
> bar"
On Wed, 15 Jan 2020 17:40:26 +0100, Peter Graf via Ql-Users wrote:
> Thierry Godefroy wrote:
> > In fact, I found out today that by increasing the sample rate to 1260 (from
> > the 1200 I used so far) on the OSSC, I could get it to output a 1024x512
> > (without scan doubling) or 2048x1024 (with
On Wed, 15 Jan 2020 23:07:53 +0100, Peter Graf via Ql-Users wrote:
> Those are small PLDs, optimized almost to the last gate, not FPGAs,
> and 800x600 is not doable.
Surprising, since it's "just" a change in divisors/counters/
frequencies, but if you say so (I'm certainly no expert in PLD/FPGA
On Thu, 16 Jan 2020 12:20:16 +0100, pgraf--- via Ql-Users wrote:
> If the OSSC wasn't such an expensive, clumsy setup, I would also just
> say: Issue solved. Period.
All what matters for me is that it plain works and secures the usage
of my Q60 in the future. "Clumsy" or not, the fact the OSSC
On Mon, 13 Jan 2020 20:59:40 +0100, Peter Graf via Ql-Users wrote:
> Thanks for trying it with the Q60. If it nicely converts the Q60 signal,
> that would be a big point despite the very high price.
Well, everything is relative... You can find a built OSSC with its remote
and power supply for
On 8 January 2020 21:58:23 GMT, Marcel Kilgus wrote:
> In case anybody is still lurking here and has not jumped ship to
> Facebook or the forum, I made a new post about my QL-VGA hardware
I don't want to undermine your (nifty) project or discourage you to
pursue it, but I recently found a
On Thu, 23 Apr 2020 12:10:13 +0200, Wolfgang Lenerz via Ql-Users wrote:
> I don't feel it necessary to release a new version of SMSQE for this.
Err... I do need the corresponding sources, so that I can patch them (I need
a delay on boot for the hard disk, else it won't cold-boot on it) and burn
On Thu, 23 Apr 2020 13:37:15 +0200, Fabrizio Diversi via Ql-Users wrote:
> On 23/04/2020 13:08, Thierry Godefroy via Ql-Users wrote:
>
> > Err... I do need the corresponding sources, so that I can patch them
> > (I need a delay on boot for the hard disk, else
On Thu, 23 Apr 2020 09:16:36 +0200, Wolfgang Lenerz via Ql-Users wrote:
> > Sadly, this change totally broke secondary partitions support for Atari
> > partitioned hard disks.
>
> Just to make sure, this change broke things in 3.36 only, not in 3.35?
Yep. v3.35 works like a charm in this
On Thu, 23 Apr 2020 14:57:11 +0200, Wolfgang Lenerz via Ql-Users wrote:
> > I can vouch for this fact that, sadly and while implementing a "full IDE"
> > compatibility mode, the Compact Flash cards (their "reader" is actually
> > just a controller-less CF connector to PATA IDE connector adapter)
On Thu, 23 Apr 2020 15:39:39 +0200, Wolfgang Lenerz via Ql-Users wrote:
> > I just coded a (very quick) and (totally) dirty 5s delay loop in the
> > Q40 HD init code. The *proper* fix would require waiting in a loop
> > (that would timeout after 10s or so) for a HD to show up and report
> > as
On Thu, 23 Apr 2020 22:02:36 +0200, Fabrizio Diversi via Ql-Users wrote:
> this is the "device" I use on the Q60:
> https://www.amazon.fr/Syba-SD-ADA45006-Interne-lecteur-m%C3%A9moire/dp/B0036DDXUM
> The device can fit 2 CF, the master on one side, the slave on the other.
Probably just another
On Sun, 19 Apr 2020 07:52:43 +0200, Wolfgang Lenerz via Ql-Users wrote:
> The Qx0 can read container files from the first four FAT32 partitions
> and has some new card related keywords (see extras_new_Q40_FAT32_txt)
Sadly, this change totally broke secondary partitions support for Atari
On Thu, 23 Apr 2020 23:42:31 +0200, Peter Graf via Ql-Users wrote:
> Fabrizio Diversi via Ql-Users wrote:
> > - As a slave I have a 4 GB Toshiba SD HC with a CF adapter Type II.
>
> Ah! Very good idea! With the right passive CF-IDE adapters, those might
> not suffer the same problem as the
On Mon, 11 May 2020 15:38:42 -0500, Dave Park via Ql-Users wrote:
> A small circuit can split the master/slave into two isolated masters
> that would work in most or all cases. Is this of interest as a possible
> solution?
I thought about it but the problem is with finding all the deprecated
40
On Tue, 12 May 2020 07:34:08 +0200, Fabrizio Diversi via Ql-Users wrote:
> I am in the middle of multiple tests with CF/IDE and SD/IDE readers with
> different type/size of CF and SD
>
> Few words about the 2 machine I am using :
>
> - Q40 with 1 IDE controller card with primary channel
On Tue, 12 May 2020 10:27:07 +0200, Wolfgang Lenerz via Ql-Users wrote:
> Just a question - what happens if you re-load (per LRESPR ,not
> automatically at boot time)
Yes, I was about to ask the same question, but you bet me to it.
It is probably the same issue as the one I encountered with my
25 matches
Mail list logo
