Re: [qubes-users] How do I get Snowflake proxy working in sys-whonix?

This sounds like an excellent question for https://forums.whonix.org/ ;-) /Sven -- https://keys.openpgp.org/vks/v1/by-fingerprint/DA5975C9ABC40C833B2F620B2A632C537D744BC7 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this

[qubes-users] How do I get Snowflake proxy working in sys-whonix?

I see there is a 'snowflake' proxy option in the Tor control panel, however it gets stuck at 0% and refuses to connect. I can't find any resources. Closest I found is this forum thread: https://forum.qubes-os.org/t/snowflake-proxy-causes-crash-in-tor-control-panel/12326 It's not the same issue,

Re: [qubes-users] How do I install trezor-bridge on a Qubes system without a sys-usb qube e

On 5/12/21 2:02 PM, 'awokd' via qubes-users wrote: newer laptops often only have one, in the continued pursuit of saving a few pennies at the customer's expense Yep, my ThinkPad P51 came with just one. Got an additional express card to have a second one. /Sven -- public key:

Re: [qubes-users] How do I install trezor-bridge on a Qubes system without a sys-usb qube e

On Wed, May 12, 2021 at 07:02:36PM +, 'awokd' via qubes-users wrote: > unman: > > > Is it unusual to have more than one controller on a laptop? Venerable > > old Thinkpads had 2 or 3, and you could easily keep one for dom0 and the > > other(s) for sys-usb purposes. > > From what I hear/have

Re: [qubes-users] How do I install trezor-bridge on a Qubes system without a sys-usb qube e

unman: Is it unusual to have more than one controller on a laptop? Venerable old Thinkpads had 2 or 3, and you could easily keep one for dom0 and the other(s) for sys-usb purposes. From what I hear/have seen, newer laptops often only have one, in the continued pursuit of saving a few pennies

Re: [qubes-users] How do I install trezor-bridge on a Qubes system without a sys-usb qube e

On Mon, May 10, 2021 at 06:12:47PM +, 'awokd' via qubes-users wrote: > 'Joanna Anders' via qubes-users: > > > > I'm trying to make Trezor Model T work on my Qubes system installed on a > > ssd *usb drive* according to this guide https://wiki.trezor.io/Qubes_OS . > > So by default the *sys-usb

Re: [qubes-users] How do I install trezor-bridge on a Qubes system without a sys-usb qube e

'Joanna Anders' via qubes-users: I'm trying to make Trezor Model T work on my Qubes system installed on a ssd *usb drive* according to this guide https://wiki.trezor.io/Qubes_OS . So by default the *sys-usb qube is disabled*. If I try to enable it my whole system turns unusable. Should I edit

[qubes-users] How do I install trezor-bridge on a Qubes system without a sys-usb qube e

I'm trying to make Trezor Model T work on my Qubes system installed on a ssd *usb drive* according to this guide https://wiki.trezor.io/Qubes_OS . So by default the *sys-usb qube is disabled*. If I try to enable it my whole system turns unusable. Should I edit the *sys-net* qube instead of

[qubes-users] How do I attach a hard drive to a VM on boot?

I have an HP laptop with 4.0.2.rc2 installed. Everything works well, with the exception of a couple of small things I've asked about previously. Now I'm trying to tune it a bit. I have a 256G SSD where qubes is installed, and a 1TB traditional hard drive. I want to attach the hard drive

Re: [qubes-users] How do I get Started?

Qubes User: Hi everyone, Thank you for all your help and discussion. I posted the HCL for the device I'm troubleshooting -- the latest Lenovo Flex 14 with the i5-10210U. You can find it here: https://groups.google.com/forum/#!topic/qubes-users/kamMImlGMNQ I'm guessing the plan is to set up

Re: [qubes-users] How do I get Started?

Claudia: I looked at your HCL report, and given the number of issues you're facing, it might be worth trying a R4.1 pre-release build, which is based on F29 and Xen 4.12. These builds are considered unstable, but you very well might end up with fewer headaches than the older stable releases.

Re: [qubes-users] How do I get Started?

Hi everyone, Thank you for all your help and discussion. I posted the HCL for the device I'm troubleshooting -- the latest Lenovo Flex 14 with the i5-10210U. You can find it here: https://groups.google.com/forum/#!topic/qubes-users/kamMImlGMNQ I'm guessing the plan is to set up networking,

Re: [qubes-users] How do I get Started?

Bernhard: By default network cards are assigned to sys-net and are not visible in dom0 (as far as I know). Open the Qubes Manager -> sys-net -> VM settings -> Devices tab, and make sure your network card is assigned to it. So you need to run lsusb or lspci from within sys-net, not dom0. You

Re: [qubes-users] How do I get Started?

By default network cards are assigned to sys-net and are not visible in dom0 (as far as I know). Open the Qubes Manager -> sys-net -> VM settings -> Devices tab, and make sure your network card is assigned to it. So you need to run lsusb or lspci from within sys-net, not dom0. You should also

Re: [qubes-users] How do I get Started?

Claudia: By default network cards are assigned to sys-net and are not visible in dom0 (as far as I know). Open the Qubes Manager -> sys-net -> VM settings -> Devices tab, and make sure your network card is assigned to it. So you need to run lsusb or lspci from within sys-net, not dom0. You

Re: [qubes-users] How do I get Started?

Qubes User: Thank you for your help. Happy to do what I can. First, if you can, please generate an HCL report on the machine and send it to the mailing list. This will tell us some basic info about your machine so we have a better idea what we're troubleshooting. (It also helps the Qubes

Re: [qubes-users] How do I get Started?

When I click the applet, I see: Ethernet Network device not managed VPN Connections > I don't see my WiFi networks. When I launch network manager in sys-net, I tried to manually input the information for my WiFi (with the SSID and WPA2/Personal), but it doesn't connect after. Try lspci in dom0

Re: [qubes-users] How do I get Started?

Thank you for your help. On Tuesday, December 3, 2019 at 12:10:11 PM UTC-8, Claudia wrote: > > Qubes User: > > I just installed Qubes on a new laptop. I'm trying to do some basic > things > > not listed on https://www.qubes-os.org/getting-started/ > > > > 1. How do I get connected to my

Re: [qubes-users] How do I get Started?

Qubes User: I just installed Qubes on a new laptop. I'm trying to do some basic things not listed on https://www.qubes-os.org/getting-started/ 1. How do I get connected to my wi-fi? The networkmanager applet should appear in the task tray (next to the clock). Just click on that and select a

[qubes-users] How do I get Started?

I just installed Qubes on a new laptop. I'm trying to do some basic things not listed on https://www.qubes-os.org/getting-started/ 1. How do I get connected to my wi-fi? 2. How do I use an external display with HDMI? (just plugging it in doesn't work for me) 3. How do I reduce the lag on my USB

Re: [qubes-users] How do I hide sys-net and sys-firewall from the list of available NetVMs?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On 2019-11-22 22:07, swisspal...@firemail.cc wrote: > Hi, > > I would like to hide both sys-net and sys-firewall from the list > of available NetVMs when I create a new qube or when I modify a > qube. > > The reason for this is that I sometimes

[qubes-users] How do I hide sys-net and sys-firewall from the list of available NetVMs?

Hi, I would like to hide both sys-net and sys-firewall from the list of available NetVMs when I create a new qube or when I modify a qube. The reason for this is that I sometimes create and delete many qubes within one day and this could lead to accidently choosing sys-net or sys-firewall

Re: [qubes-users] How do I launch NetworkManager??!!

Yeah it says "sys-net: command failed with code: 2" when I type in those commands. On Monday, August 19, 2019 at 8:11:29 PM UTC-4, 799 wrote: > > Hello > > O K > schrieb am Di., 20. Aug. 2019, 01:39: > >> I wanted to create a desktop shortcut or some sort of easy way to access >> NM but I

Re: [qubes-users] How do I launch NetworkManager??!!

Yeah it would be ideal if I had easy access from my desktop, so if you could give me the exact commands it would great, thanks for the help. On Monday, August 19, 2019 at 8:11:29 PM UTC-4, 799 wrote: > > Hello > > O K > schrieb am Di., 20. Aug. 2019, 01:39: > >> I wanted to create a desktop

Re: [qubes-users] How do I launch NetworkManager??!!

Hello O K schrieb am Di., 20. Aug. 2019, 01:39: > I wanted to create a desktop shortcut or some sort of easy way to access > NM but I forgot how to open it. I thought it was some command in the > sys-net terminal but I don't recall. (...) > You can run nmcli in the VM which has network

[qubes-users] How do I launch NetworkManager??!!

I wanted to create a desktop shortcut or some sort of easy way to access NM but I forgot how to open it. I thought it was some command in the sys-net terminal but I don't recall. There is no icon anywhere for it. I added the settings option to sys-net under Applications to see if I could

[qubes-users] How do I make sure that kernel-headers can be found at /lib/modules/4.19.56-1.pvops.qubes.x86_64/build or /lib/modules/4.19.56-1.pvops.qubes.x86_64/source

Hi, I'm trying to get Displaylink drivers working on my P52s ThinkPad so I can use a USB-C docking station (needs Displaylink to use monitors through USB-C dock). I've had a few hiccups which I've detailed

[qubes-users] How do I create a Qubes USB Installer within Qubes OS (if it's possible)?

Mint lets you do it, but not sure about Qubes. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion

[qubes-users] How do I fix "Problem Signature" issue on startup after installing Windows Tools

Getting a bunch of "Problem signature" errors when starting up Windows 7 qube after installing Windows Tools. Startup repair in Windows begins and can't fix the error, so I can't even get into the OS. Also, I entered "qvm-prefs -s qrexec_timeout 300" after installation, rebooted the computer

[qubes-users] How do I fix "Problem Signature" issue on startup after installing Windows Tools

Getting a bunch of "Problem signature" errors when starting up Windows 7 qube after installing Windows Tools. Startup repair in Windows begins and can't fix the error, so I can't even get into the OS. Thanks. -- You received this message because you are subscribed to the Google Groups

[qubes-users] How do I install headphones and an external mic to Windows Qube?

I followed the instructions on Qubes site for installing external audio devices (https://www.qubes-os.org/doc/external-audio/), typed in last line: pactl load-module module-udev-detect, and it says: Failure: Module initialization failed. Instructions say to use terminal of Qube the install

Re: [qubes-users] How do I install programs in Windows 7 Qube?

On Thursday, July 4, 2019 at 5:44:53 PM UTC-4, awokd wrote: > > On Wednesday, July 3, 2019 at 4:18:05 PM UTC-4, awokd wrote: > > > >>> On Monday, July 1, 2019 at 7:32:32 PM UTC-4, awokd wrote: > >>> > > Installer programs I believe need to be run from the windows os, so not > > sure how

Re: [qubes-users] How do I install programs in Windows 7 Qube?

oak2...@gmail.com: > On Wednesday, July 3, 2019 at 4:18:05 PM UTC-4, awokd wrote: > >>> On Monday, July 1, 2019 at 7:32:32 PM UTC-4, awokd wrote: >>> > Installer programs I believe need to be run from the windows os, so not > sure how to copy it to the desktop of the os to run it. >

Re: [qubes-users] How do I install programs in Windows 7 Qube?

On Wednesday, July 3, 2019 at 4:18:05 PM UTC-4, awokd wrote: > > On Monday, July 1, 2019 at 7:32:32 PM UTC-4, awokd wrote: > > > >>> Installer programs I believe need to be run from the windows os, so not > >>> sure how to copy it to the desktop of the os to run it. > >>> > >> > >> If you have

Re: [qubes-users] How do I install programs in Windows 7 Qube?

oak2...@gmail.com: > On Monday, July 1, 2019 at 7:32:32 PM UTC-4, awokd wrote: > >>> Installer programs I believe need to be run from the windows os, so not >>> sure how to copy it to the desktop of the os to run it. >>> >> >> If you have the windows tools properly installed, you should be able

Re: [qubes-users] How do I install programs in Windows 7 Qube?

On Monday, July 1, 2019 at 7:32:32 PM UTC-4, awokd wrote: > > Installer programs I believe need to be run from the windows os, so not > > sure how to copy it to the desktop of the os to run it. > > > > If you have the windows tools properly installed, you should be able to > copy to it from a

Re: [qubes-users] How do I install programs in Windows 7 Qube?

oak2...@gmail.com: Installer programs I believe need to be run from the windows os, so not sure how to copy it to the desktop of the os to run it. If you have the windows tools properly installed, you should be able to copy to it from a different VM with qvm-copy. -- You received this

[qubes-users] How do I install programs in Windows 7 Qube?

Installer programs I believe need to be run from the windows os, so not sure how to copy it to the desktop of the os to run it. Also, can't enter fullscreen in win7, it stays small even when I click "fullscreen" in dropdown. -- You received this message because you are subscribed to the

[qubes-users] How do I choose the right controller for Opt Drive in Win7 Qube?

Hi, I'm trying to assign the opt drive controller to the Win7new Qube so I can use an install cd to install windows in the qube, but I can't figure out which one the optical drive controller is. How do I figure it out? I tried using command line to attach it (as per Qubes instructions) with:

Re: [qubes-users] How do I keep installed app working

On Saturday, April 27, 2019 at 5:53:51 PM UTC-5, js...@bitmessage.ch wrote: > 'Island Anchor' via qubes-users: > > Hi I installed app in Qubes and followed process > > > > sudo apt-get install git build-essential ... etc > > > > finally got to make then I was able to successfully launch the app

Re: [qubes-users] How do I keep installed app working

'Island Anchor' via qubes-users: Hi I installed app in Qubes and followed process sudo apt-get install git build-essential ... etc finally got to make then I was able to successfully launch the app in my folders. When I close the VM or shut-down upon reload I cannot run the app. However, if

[qubes-users] How do I keep installed app working

Hi I installed app in Qubes and followed process sudo apt-get install git build-essential ... etc finally got to make then I was able to successfully launch the app in my folders. When I close the VM or shut-down upon reload I cannot run the app. However, if I start to run the sudo commands

[qubes-users] How do i setup correctly an OpenMediaVault in Qubes?

Hi, what i already try here : https://forum.openmediavault.org/index.php/Thread/25472-OMV-inside-QubesOs-web-gui-innaccessible/?postID=192084#post192601 >open media vault forum section network sorry for double post -- You received this message because you are subscribed to the Google Groups

[qubes-users] How do i setup correctly an OpenMediaVault in Qubes?

Hi, what i already try here : -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to

Re: [qubes-users] How do i setup correctly an OpenMediaVault in Qubes?

marmot-te wrote on 1/8/19 3:55 PM: Hi, what i already try here : https://forum.openmediavault.org/index.php/Thread/25472-OMV-inside-QubesOs-web-gui-innaccessible/?postID=192084#post192601 You only need that to be an HVM if you're planning on assigning a dedicated NIC to it. That would

[qubes-users] How do i setup correctly an OpenMediaVault in Qubes?

Hi, what i already try here : https://forum.openmediavault.org/index.php/Thread/25472-OMV-inside-QubesOs-web-gui-innaccessible/?postID=192084#post192601 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop

Re: [qubes-users] how do I check Tor & Whonix version?

Thanks for the helpful information. I will upgrade to Whonix 14. (Completely new download and instalation). -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [qubes-users] how do I check Tor & Whonix version?

Thanks a lot for your tips and advice, my Tor version in Qubes4.0 - Whonix is ​​0.3.2.9. Which Tor version is currently the most current and the safest? I do not know the goal is 1000% safe but which is the best and safest version currently? However, I could not figure out my Whonix version,

Re: [qubes-users] how do I check Tor & Whonix version?

thanks I try everything from what you have written to me and sign me up again this evening :) -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [qubes-users] how do I check Tor & Whonix version?

qubes123...@gmail.com: > I entered -> "whonixcheck --verbose --function show_versions" and got this, > see screenshot in the link. > > https://ibb.co/b2GZq0 > In your pic you forgot the underscore in `show_versions`, no need for sudo. This will not give you your Tor version. For that you have

[qubes-users] how do I check Tor & Whonix version?

Hi, did you try with sudo ? Birdy -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email

[qubes-users] how do I check Tor & Whonix version?

I entered -> "whonixcheck --verbose --function show_versions" and got this, see screenshot in the link. https://ibb.co/b2GZq0 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it,

[qubes-users] how do I check Tor & Whonix version?

I entered -> "whonixcheck --verbose --function show_versions" and got this, see screenshot in the link. https://ibb.co/b2GZq0 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it,

[qubes-users] how do I check Tor & Whonix version?

Hi take a look at : https://www.whonix.org/wiki/Whonixcheck The CHECK VERSION section whonixcheck --verbose --function show_versions Birdy -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving

[qubes-users] how do I check Tor & Whonix version?

how do I check which whonix version I have, I have Qubes 4.0 with Whonix, all updates I have also downloaded and installed. VMs and Dom0 all equipped with the last update. Where do I look now only which Tor version and which Whonix version I have? thank you in advance -- You received this

Re: [qubes-users] How do I install this Firewall HVM ?

On 08/14/18 16:43, Who Cares wrote: I´m trying to implement this Kerio-control system. I thought this would have been a nice combo of firewall and VPN. You might want to read up on the Qubes Proxy VPN setup and compare how that works with what KerioControl is expecting for its environment.

Re: [qubes-users] How do I install this Firewall HVM ?

I´m trying to implement this Kerio-control system. I thought this would have been a nice combo of firewall and VPN. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email

Re: [qubes-users] How do I install this Firewall HVM ?

On 08/14/2018 02:22 PM, Steve Coleman wrote: On 08/14/18 13:40, Who Cares wrote: I am using qubes 4.0 and i am trying to install a firewall. Qubes comes with an integrated firewall in the sys-firewall VM. It uses managed iptables which provide the basic rules to protect the system, but

Re: [qubes-users] How do I install this Firewall HVM ?

On 08/14/18 13:40, Who Cares wrote: I am using qubes 4.0 and i am trying to install a firewall. Qubes comes with an integrated firewall in the sys-firewall VM. It uses managed iptables which provide the basic rules to protect the system, but also allow you to make adjustments as required

[qubes-users] How do I install this Firewall HVM ?

Hello, I am using qubes 4.0 and i am trying to install a firewall. I try to isntall kerio control (http://www.kerio.de/products/kerio-control) as it supports VPN. At the end i want to use it as the firewall-VM rather than buy a physical firewall. Kerio-control got some several versions: 1:

[qubes-users] How do I install a Firewall ? Using Qubes as local Server !

Hello, I am using qubes 4.0 and i am trying to install a firewall. I try to isntall kerio control (http://www.kerio.de/products/kerio-control) as it supports VPN. At the end i want to use it as the firewall-VM rather than buy a physical firewall. Kerio-control got some several versions: 1:

[qubes-users] how do I / Can I propagate language settings to all VMs?

hi everyone When installing, I set UK Engish and the keyboard works as expected in all VMs (no surprise as the hci i/o is done by dom0) However, packages that would usually pick up locale info on a more traditional Linux all seem to think I am in the US. I find I am having to tell

Re: [qubes-users] How do I install Jitsi on fedora-26?

To make persistent changes launch the Fedora template you’re using and install the application(s) using dnf. You can also use dnf to search for applications in the main repositories. Once you’re done turn off the template VM / restart any Qubes using it. Your software should be available. You

[qubes-users] How do I fix slowed down connection when entering software application? EOM

-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To

[qubes-users] How do I install Jitsi on fedora-26?

Or how to find an a software. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

On 03/30/2018 09:24 AM, Holger Levsen wrote: > On Thu, Mar 29, 2018 at 03:38:34PM -0400, taii...@gmx.com wrote: >> My issue is with purisms incredibly dishonest marketing, their pressure >> campaigns on the FSF, their insulting of their competitors - not their >> existence in general or the

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

I am more than happy to help the next time you are in the market for a computer :] it is a damn shame how dishonest purism isbut there are still some honest companies out there selling real libre products. Btw the debian template is not as secure due to their silly position on starting

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

On Wednesday, March 28, 2018 at 5:37:04 PM UTC-4, Chris Laprise wrote: > On 03/28/2018 05:02 PM, Ringo wrote: > > Greetings. I have a Purism 15v3 laptop with an Atheros AR9462 wi-fi card. > > The card works under Qubes but it's slow, with bit-rate of only 6/mpbs. I > > had this issue before,

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

On 03/30/2018 11:53 AM, ja...@brucejones.biz wrote: On Wednesday, March 28, 2018 at 5:37:04 PM UTC-4, Chris Laprise wrote: On 03/28/2018 05:02 PM, Ringo wrote: Greetings. I have a Purism 15v3 laptop with an Atheros AR9462 wi-fi card. The card works under Qubes but it's slow, with bit-rate

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

Holger Levsen: > On Thu, Mar 29, 2018 at 03:38:34PM -0400, taii...@gmx.com wrote: >> My issue is with purisms incredibly dishonest marketing, their pressure >> campaigns on the FSF, their insulting of their competitors - not their >> existence in general or the practice of selling of laptops that

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

On Wednesday, March 28, 2018 at 5:37:04 PM UTC-4, Chris Laprise wrote: > On 03/28/2018 05:02 PM, Ringo wrote: > > Greetings. I have a Purism 15v3 laptop with an Atheros AR9462 wi-fi card. > > The card works under Qubes but it's slow, with bit-rate of only 6/mpbs. I > > had this issue before,

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

On Thu, Mar 29, 2018 at 03:38:34PM -0400, taii...@gmx.com wrote: > My issue is with purisms incredibly dishonest marketing, their pressure > campaigns on the FSF, their insulting of their competitors - not their > existence in general or the practice of selling of laptops that are only > slightly

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

On 03/29/2018 02:52 PM, 799 wrote: > Maybe users buy a Purism laptop and next time they buy something even more > free ... That's still great. My issue is with purisms incredibly dishonest marketing, their pressure campaigns on the FSF, their insulting of their competitors - not their existence

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

Hello, taii...@gmx.com schrieb am Do., 29. März 2018, 20:36: > I believe in this case you should be contacting your vendor for > technical support - you certainly paid more than enough to deserve some. [...] > "We are doing the best we can" > Wrong. > There are companies that

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

I believe in this case you should be contacting your vendor for technical support - you certainly paid more than enough to deserve some. I have several questions for you: I am curious did you know pre-purchase that purisms laptops are not actually libre, that their ME isn't disabled and that the

Re: [qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

On 03/28/2018 05:02 PM, Ringo wrote: Greetings. I have a Purism 15v3 laptop with an Atheros AR9462 wi-fi card. The card works under Qubes but it's slow, with bit-rate of only 6/mpbs. I had this issue before, on the same laptop when it was first shipped with the PureOS distribution (a debian

[qubes-users] How do I load firmware-atheros into Qubes 4.0 R5?

Greetings. I have a Purism 15v3 laptop with an Atheros AR9462 wi-fi card. The card works under Qubes but it's slow, with bit-rate of only 6/mpbs. I had this issue before, on the same laptop when it was first shipped with the PureOS distribution (a debian distribution) and was able to fix it

Re: [qubes-users] How do I create an HVM?

Hello, Am 10.03.2018 8:19 vorm. schrieb "sevas" : Been following the docs and I cant get it. qvm-create --hvm #No such argument qvm-create --HVM #No such argument qvm-create --class hvm qvm-create --class=hvm qvp create --class hardwareVM you get the picture. I

Re: [qubes-users] How do I create an HVM?

On Sat, March 10, 2018 7:19 am, sevas wrote: > Been following the docs and I cant get it. > > > qvm-create --hvm #No such argument > qvm-create --HVM #No such argument > qvm-create --class hvm qvm-create --class=hvm qvp create --class > hardwareVM > > you get the picture. I must be missing

[qubes-users] How do I create an HVM?

Been following the docs and I cant get it. qvm-create --hvm #No such argument qvm-create --HVM #No such argument qvm-create --class hvm qvm-create --class=hvm qvp create --class hardwareVM you get the picture. I must be missing something. I just want to start an iso from a VM. Im

Re: [qubes-users] How do I install and configure a template vm in Qubes 4?

> The same functionality is present in Qubes4, just not via a GUI. > > open a terminal in dom0 (adminvm) and type; > > qvm-prefs -s YOURVMNAME netvm sys-firewall > > When you are done downloading consider unsetting the netvm with; > qvm-prefs -s YOURVMNAME netvm "" I thought so, I just can't

Re: [qubes-users] How do I install and configure a template vm in Qubes 4?

On Thursday, 4 January 2018 10:40:56 GMT 'Ahmed Al Aqtash' via qubes-users wrote: > In 3.2 you could allow network access in a template rather easily through > the GUI, and thus be able to pull software from other destinations than > just repos. The same functionality is present in Qubes4, just

[qubes-users] How do I install and configure a template vm in Qubes 4?

Hello all! I have recently installed Qubes 4 RC3 (I used Qubes 3.2, but when I switched laptops the installer was outdated, and I was forced to use something else..) In 3.2 you could allow network access in a template rather easily through the GUI, and thus be able to pull software from other

Re: [qubes-users] how do i use usb device?

On Tue, December 19, 2017 2:56 am, jerry wrote: > after sudo command (sudo qubesctl state.highstate) to enable and configure > sys-sub the operation system has stopping working or something like > that... Sounds like you are following the first two steps from https://www.qubes-os.org/doc/usb. If

[qubes-users] how do i use usb device?

after sudo command (sudo qubesctl state.highstate) to enable and configure sys-sub the operation system has stopping working or something like that... -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop

[qubes-users] How do I upgrade to Fedora 26?

Since it just came out I would like to know if it is safe to upgrade or if there are specific things that should be taken into account. Can the same instruction as for the upgrade from 23 to 24 be used? -- You received this message because you are subscribed to the Google Groups "qubes-users"

Re: [qubes-users] How do I use a USB printer / joystick?

js...@riseup.net: >> Hi everyone, >> >> I'm running Qubes 3.2 and I'd like to use a USB joystick (Playstation >> 3 controller) for games, but I'm not sure how. >> >> When I connect the controller to my USB port, Qubes doesn't seem to >> recognize it at all. I don't see a way to "attach" it to an

Re: [qubes-users] How do I use a USB joystick?

On 06/29/2017 11:11 PM, js...@riseup.net wrote: Hi everyone, I'm running Qubes 3.2 and I'd like to use a USB joystick (Playstation 3 controller) for games, but I'm not sure how. When I connect the controller to my USB port, Qubes doesn't seem to recognize it at all. I don't see a way to

[qubes-users] How do I use a USB joystick?

Hi everyone, I'm running Qubes 3.2 and I'd like to use a USB joystick (Playstation 3 controller) for games, but I'm not sure how. When I connect the controller to my USB port, Qubes doesn't seem to recognize it at all. I don't see a way to "attach" it to an AppVM (not a block device or PCI

Re: [qubes-users] How do I get Qubes 4.0 pre-release/dev build?

On Mon, May 22, 2017 at 10:20:54AM -0700, img2s...@gmail.com wrote: > Le mercredi 30 novembre 2016 18:34:34 UTC+1, Jean-Philippe Ouellet a écrit : > > On Wed, Nov 30, 2016 at 11:49 AM, wrote: > > > Can someone tell me where I can get the files? Any tips or hints when it

Re: [qubes-users] How do I change the DispVM generation time out limit?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Tue, Apr 18, 2017 at 12:30:30PM -0600, Reg Tiangha wrote: > I run Qubes on a laptop with a regular hard drive, and I've noticed that > as my drive fills up and I assume fragmentation hits, it takes longer > and longer for VMs to start up as they

[qubes-users] How do I change the DispVM generation time out limit?

I run Qubes on a laptop with a regular hard drive, and I've noticed that as my drive fills up and I assume fragmentation hits, it takes longer and longer for VMs to start up as they get moved around by qvm-trim-template and what not. It comes with the territory so I've just learned to live with

Fwd: [qubes-users] How do I...?

On Tue, Apr 04, 2017 at 11:05:16AM -0400, Jean-Philippe Ouellet wrote: > On Tue, Apr 4, 2017 at 8:56 AM, Samuel Hentschel > wrote: > > I have terrible vision and I just got a Lenovo Thinkpad X1 Carbon Gen3 > > specifically for Qubes. Its got WQHD and everything is *tiny*.

Re: [qubes-users] How do I...?

On Tue, Apr 4, 2017 at 8:56 AM, Samuel Hentschel wrote: > Hey Qubes Community, > > I'm a "new" QubesOS user; as in this is my first time trying it to > make it my daily carry. I have a couple questions that you guys may > be able to help me with. Hey Sam, welcome to the

[qubes-users] How do I...?

Hey Qubes Community, I'm a "new" QubesOS user; as in this is my first time trying it to make it my daily carry. I have a couple questions that you guys may be able to help me with. I have terrible vision and I just got a Lenovo Thinkpad X1 Carbon Gen3 specifically for Qubes. Its got WQHD and

[qubes-users] How do I know - is that a MAJOR usability issue? (subject replaced)

Hello. Currently I'm not that busy but steel overloaded by technical debt. I've cleaned the tech debt for some organisation units outside of my usual daily interest. всё хорошо. :) Баг не касается ничего существенного. Пошёл в обязательный ребут. Сходимость очередей на запуск на уровне

Re: [qubes-users] How do I attach two virtualized NICs to one HVM?

On Tue, Jan 31, 2017 at 01:24:21PM -0800, Charlie wrote: > Hi. > > I'm wanting to run OPNsense on Qubes along with some other VMs. I have a > working OPNsense HVM, but to actually be useful OPNsense needs two NIC's (a > LAN and WAN). I can't figure out a comfortable way to do such on Qubes

[qubes-users] How do I attach two virtualized NICs to one HVM?

Hi. I'm wanting to run OPNsense on Qubes along with some other VMs. I have a working OPNsense HVM, but to actually be useful OPNsense needs two NIC's (a LAN and WAN). I can't figure out a comfortable way to do such on Qubes though. Extra info: OPNsense is, itself, a firewall, so I don't think

Re: [qubes-users] How do I get Qubes 4.0 pre-release/dev build?

On Thursday, 8 December 2016 21:48:05 UTC+1, Marek Marczykowski-Górecki wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On Thu, Dec 08, 2016 at 08:56:25AM -0800, wrote: > > Could someone maybe give some help with the error message? > > The one about missing signed tags? They are

Re: [qubes-users] How do I get Qubes 4.0 pre-release/dev build?

Next error is for core3-admin.get-sources, repo not found, this is from your repo, can you fix this? Any chance you can meet me on some chat so we can work out all errors at once? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe

  1   2   >