OK, have just noticed these in the message log:
Apr 10 17:17:00 vortex pam_rhosts_auth[5450]: denied to
[EMAIL PROTECTED] as sbryan: access not allowed
Could any of this mess be to do with the fact that the original mounted
drive was /hdb1 and the new one decided to be /hdb2?
Cheers and thanks
Hi Slugs,
We are getting lots of unrouteable mail domain messages both from internal
messages going out and we are hearing from others emailing us that emails
have been sent but bounced back from us. (Even this message bounced back
once)
I'm looking into frozen messages errors from the exim
Well I'm using a toshiba satellite pro 4600 and am very happy, there was a bit
of trouble setting it up (had to use framebuffer mode for X to work but
XFree-4.2 has fixed that - still no hardware acceleration though so can't
watch full screen DVDs). eepro network card had problems but works
Hello all,
May I ask if anybody know I can get replacement battery for my thinkpad
600e? Its P/N is: 02K7018. I kinna googled around but seems I need to
have a credit card to order and seem all the shop that keep stocks are
not located in Oz. If I can't find a reseller somewhere guess I'll have
Ben,
I think you should be fine if you get the new box all up and running before
hand and then just plug it in in place of the old box.
Obvioulsy test it out and make sure it all going to work thoroughly
beforehand.
Why would you whack a desktop distro on the box instead of debian woody?
Not
May I ask if anybody know I can get replacement battery for my thinkpad
600e? Its P/N is: 02K7018.
Thanks,
Lester
Try Premier batteries (Tell Alf that Biomed Lismore Base Hosp referred you)
Be aware tho, that I have had troubles with an aftermarket Li-on battery for
a Compaq, and had to
On Wed, Apr 10, 2002 at 01:14:55PM +1000, Christopher Booth wrote:
Reminds me of an idea I had of writing a song about linux.
Well, if you're interested in that you should read:
http://slashdot.org/comments.pl?sid=8098cid=725211
(Chords added by me, to the tune of 'Puff, the Magic Dragon').
C
Oh my god! I wasn't writing English. Guess I shouldn't type while I'm
sleeping.
Thanks Doug for the info. It would be more handly if you include the address/contact
of the shop thou'
On Wed, Apr 10, 2002 at 11:29:00PM +1000, Doug Foskey wrote:
May I ask if anybody know I can get
Darn, I knew I spoke too soon. I had the machine running fine on the new
kernel. Until I restarted her, and upon restart she says fsck.ext3 exited
with error 7. (bus error).
She has done it before and I cannot figure out why. I checked the logs and
she shutdown the same as every other time.
Joseph Sirucka wrote:
I've CC'd this to the SLug list as it is a general problem that comes up
regularly.
In September last year you had a conversation of getting the TV EXCEL
card working in linux.
Currently I am having problems installing this card.
1. my card currently works
2. it
2. it only works as black and white and no color, I have nvidia gforce 2
card, would this be a problem
Three things to look at;
1) aerial, if it is not big enough, you will not get enough signal
for colour. The size depends on where you are. I'm almost deep fringe
(50kms), so I
I have a server site which has a permanent dial out PSTN connection to
BPD with a static IP (139.130.y.z) on /dev/ttyS0; this gets bound to ppp0.
This same site has a dial in modem on /dev/ttyS1 listening with mgetty.
The /etc/ppp/options.ttyS1 file has, amongst other lines, the following:
±¾ÓʼþʹÓÃδע²áµÄ·ÐµãȺ·¢Óʼþ·¢ËÍ
·ÐµãȺ·¢Óʼþ,À´×ÔÈí¼þ¹¤³Ìר¼ÒÍø(http://www.21cmm.com)
½øCMMÍøУ(http://www.21cmm.com)£¬³ÉÏîÄ¿¹ÜÀíר¼Ò
---
×ð¾´µÄÐÂÀÏ¿Í»§£º
ÄúºÃ!
Is there access to the Canon USB scanner API?
I just purchased a FS4000us Scanner and thought it
would be a nice toy to run in linux. Last I heard
Canon were reticent about giving access to their
API.
Kevin
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info:
Hi SLUG,
A LinuxChix chapter is about to form in Sydney, interested women might
want to go to
http://ps.pageseeder.com/ps/jg/linuxchix/default/2002/2002.html and sign
up so that you can receive details of meetings and so on.
People who don't know anything about LinuxChix might want to look here
Quoting DaZZa [EMAIL PROTECTED]:
On Wed, 10 Apr 2002, Lester Cheung wrote:
May I ask if anybody know I can get replacement battery for my thinkpad
600e? Its P/N is: 02K7018. I kinna googled around but seems I need to
have a credit card to order and seem all the shop that keep stocks are
Hi guys,
On one of the boxes I maintain, is having problems with the box. It
mysteriously reboots and freezes (including the network).
The errors I get in the logs are:
Apr 10 19:10:44 fsbris kernel: hda: lost interrupt
Apr 10 19:10:44 fsbris kernel: hda: status error: status=0x58 { DriveReady
On Wed, 10 Apr 2002, Lester Cheung wrote:
May I ask if anybody know I can get replacement battery for my thinkpad
600e? Its P/N is: 02K7018. I kinna googled around but seems I need to
have a credit card to order and seem all the shop that keep stocks are
not located in Oz. If I can't find a
On Tue, Apr 09, 2002 at 05:46:44PM +1000, Matt Hyne ([EMAIL PROTECTED]) wrote:
Folks, when I turn _OFF_ the sendmail feature
FEATURE('accept_unresolvable_domains')dnl
Well if it works without this than sendmail will accept domains
it cannot resolve and thus send them, meaning that you can
On Wed, Apr 10, 2002 at 01:46:27PM +1000, Simon Bryan ([EMAIL PROTECTED]) wrote:
No luck so far, not doing anything wacky - not with Linux anyway :-) that i
know of. popusers is the group used by the AUC IMAP server, but have tried
with all variations of the permissions and owners that I can
I've installed Debian on my iBook... now I need to know how to right click
on a single button mouse.
Suggestions welcome.
While on the subject... X windows knows the trackpad/USB mouse as a ps/2
on /dev/input/mice. I worked this out by a process of trial and error.
Does anyone know the logic
Hi Scott,
A few months ago a seagate disk on my home pc
gave a similar 'status error' and it also had this
strange grating sounds. It would recover after
a few seconds of retryinbg but this length grew longer
and longer ... until one day ...
It
Now here is another clue to what has happened, this log entry dates from
around when the system first had a problem:
/var/log/messages:Apr 9 09:21:02 vortex su: PAM unable to
dlopen(/lib/security/pam_unix.so)
/var/log/messages:Apr 9 09:21:02 vortex su: PAM [dlerror: libcrack.so.2:
cannot load
GOOD NEWS!!
I found the the bus error message is comming from installing the latest
version of e2fs-progs. It was auto-updated with ximian redcarpet. (bugger).
All I had to do was boot the RH7.2 in rescue mode, chroot into my file
system and rpm -ivh e2fs-progs --froce, from the original RH7.2 cd
On my imac running Debian woody, I have this entry in /etc/sysctl.conf:
dev/mac_hid/mouse_button_emulation = 1
dev/mac_hid/mouse_button2_keycode = 87
dev/mac_hid/mouse_button3_keycode = 88
This gives me a middle button with F11 and a right button with F12.
Then restart procps with:
HI Slugs,
I have a compaq with 96Mb in it. it boots and counts 96Mb as I've just put
in 3x32Mb simms so that is all OK.
running top on Debian reports mem: 63352k av,
Does this mean linux is only seeing 64Mb?
Is this normal or should top be reporting higher memory available and how do
I fix it?
Hi Ben,
To make sure its reporting 64Mb and not 96, type free -m (just to double
check).
If it is, then add to your /etc/lilo.conf: append=mem=96M
then run command: lilo
Regards,
Scott
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ben Donohue
Sent:
Hi Scott,
Hmmm that didn't work.
added the append=mem=96M to the bottom of lilo.conf and ran lilo.
also rebooted. still 64mb (as reported by free)
there is also another append= line in lilo.conf.
i added a ; to the end of the append= line and put in mem=96M and closed
the quotes.
eg
Still having problems.
I can send email to any other domain.
When email is sent to this domain I get the errors, but it appears the mail
is going into the mqueue directory OK, but still can't be put in the
mailbox. The system is still insisiting that /username/.forward is a World
writeable
On Thu, 2002-04-11 at 14:18, Simon Bryan wrote:
Still having problems.
I can send email to any other domain.
When email is sent to this domain I get the errors, but it appears the mail
is going into the mqueue directory OK, but still can't be put in the
mailbox. The system is still
Bill,
I tried your suggestion -
' uncomment demand then set idle persist'
- but when I try 'pon primus' as root I keep getting the error message
/usr/sbin/pppd: invalid numeric parameter '9' for idle option
I'm stumped by this one: idle persist does not work, nor do numeric
I've had no trouble with primus internet services or the modem before.
I could not find the noccp option in either /etc/ppp/options or in
/etc/ppp/peers (the latter being full of non alpha-numeric symbols).
Still frustrated,
Adam Bogacki
P.O. Box 38, Earlwood, NSW 2206, Australia
[EMAIL
The problem was that I missed the full-stop on the end of the MX record in
the DNS records. IT is fixed now.
The only question I have is: With this feature enabled, won't sendmail
refuse to accept mail if the internet connection goes down, and thus it
cannot reach external DNS servers ?
Dear List:
I "rpm -ivh SDL-1.2.3-1.i386.rpm" under Slackware
I got a list of *.lib.so that rpm cant find for
installation.
but I can find those library by "locate *.lib.so"
Is there any config-file(like profile to change $PATH)
to
lead rpm to find those librarys ?
TIA
Henry
Dear list,
When do you think the KDE packages will be available for Sid?
regards,
--
Richard Hayes
Nada Marketing - 113-115 Oxford St Darlinghurst Australia
Phone: +(61-2) 9360 Fax +(61-2) 9361 0094 0414 618 425
http://www.nada.com.au
--
SLUG - Sydney Linux User Group Mailing List -
Dave,
I've done a 'find . -name syslog -print' search and could not find a
file by that name.
Looking at Mutt, I get the following error messages:
Error message 1.
No .news.daily file: Need to run news.daily. ?
Error message 2.
Subject: innwatch warning: messages in /var/log/news/news.crit
Richard Hayes wrote:
When do you think the KDE packages will be available for Sid?
Personally? I don't know.
A good place to look though, would be on the debian-kde list, which is
where I found these:
- Debs of an old build of KDE 3.0 from CVS, last October
On Thu, 11 Apr 2002 03:00, henry shouted from the rooftops:
Dear List:
I rpm -ivh SDL-1.2.3-1.i386.rpm under Slackware
I got a list of *.lib.so that rpm cant find for installation.
but I can find those library by locate *.lib.so
Is there any config-file(like profile to change $PATH) to
I used to put a space instead of a semicolon between append args. Guess
that's the problem?
Lester
On Thu, Apr 11, 2002 at 01:19:24PM +1000, Ben Donohue wrote:
Hi Scott,
Hmmm that didn't work.
added the append=mem=96M to the bottom of lilo.conf and ran lilo.
also rebooted. still 64mb
On Thu, 11 Apr 2002, Ben Donohue wrote:
I have a compaq with 96Mb in it. it boots and counts 96Mb as I've just put
in 3x32Mb simms so that is all OK.
running top on Debian reports mem: 63352k av,
Does this mean linux is only seeing 64Mb?
Yup.
Is this normal or should top be reporting
40 matches
Mail list logo