Hi,
you can include the viewport in the viewsettings, see here
http://sumo-sim.org/userdoc/SUMO-GUI.html#Configuration_Files
Best regards,
Michael
2013/10/12 Денис Пархоменко :
>
> Dear SUMO experts,
>
> I've got ready simulation, and want to show it using SUMO GUI. But map is big
> enough and t
Hi Meng,
if ou are using traci you should add the stop after rerouting. If not,
you should include the stop (as a child element) into the route given
to the rerouter.
If this does not work please submit a bug report.
Best regards,
Michael
2013/10/13 Meng Kuai :
> Hi All,
>
> I want to realize a b
have to set a new route in rerouter?
> Meng
>
>> On Oct 13, 2013, at 11:09 AM, Michael Behrisch
>> wrote:
>>
>> Hi Meng,
>> if ou are using traci you should add the stop after rerouting. If not,
>> you should include the stop (as a child element) into the rou
ut it would have been a much stronger piece of
> work if we had included SUMO back then.
>
> Anyway, hope that helps, and maybe of interest.
>
> Regards,
>
> Vincent
>
>
> Quoting Michael Behrisch :
>
>> Hi,
>> the next SUMO conference is approaching an
questions reappearing totally, but it will certainly
>> reduce the amount. Specially, as the user base is growing, it is worth the
>> effort.
>>
>> Thanks,
>> Kaiser
>>
>>
>> On Thu, Oct 10, 2013 at 12:33 PM, Michael Behrisch <
>> behri...@us
Hi,
there is no such thing as an explicite toll plaza in SUMO, from the
view of vehicle dynamics I would say it is nothing more than a stop.
Best regards,
Michael
2013/10/13 Dileep BR :
> Hi all,
>
> I am pursuing masters in networking. For my project "Enhanced Open Toll
> System", I have to simu
Hi,
the start and the end nodes are too close to each other. You could try
removing geometry nodes (not sure if it helps though) or if you think
you can safely leave out the edge simply use --ignore-errors.
Best regards,
Michael
2013/10/13 Wilmer Arellano :
> Hello,
>
> My problem is more genera
Hi,
the dfrouter uses a heuristic to determine the routes and it may fail,
but since it may generate several routes this does not need to be
severe. After all it is just a warning, do the outputs look strange?
Best regards,
Michael
2013/10/8 Fernando Obed :
> Hi,
>
>
> I also tried to create a de
; The result turns out that the bus only stopped in its first route, but
> didn't stop in the following routes.
>
> Thank you,
>
> Meng
>
> -Original Message-
> From: wohnung.in.grue...@gmail.com [mailto:wohnung.in.grue...@gmail.com] On
> Behalf Of Michael B
Hi,
you might want to look at
http://sumo-sim.org/wiki/Simulation/Output/Lanearea_Detectors_%28E2%29
Please also note the link at the end of the page pointing to a tool
for automated detector generation.
Best regards,
Michael
2013/10/14 mohamed tahifa :
> Hey Everybody
>
> i want to create a dete
Hi,
thanks for pointing it out, it was just fixed.
Best regards,
Michael
2013/10/19 Mani Amoozadeh :
> Hi,
>
> It seems that the 'SUMOReal getAcceleration() const' method which is
> defined in MSVehicle class, returns a wrong value. It returns the speed
> difference of a vehicle (it does not divi
untu installation?
>
> Regards,
>
> Wilmer
>
>
> On Sat, Oct 19, 2013 at 3:46 PM, Michael Behrisch
> wrote:
>>
>> Hi,
>> the start and the end nodes are too close to each other. You could try
>> removing geometry nodes (not sure if it helps though
Hello Horst,
unfortunately there are not so many complex scenarios publicly
available (yet). You could try to make one for yourself by putting
some random traffic on an OpenStreetMap but I think this does not
deserve the label "interesting". The parameters to optimize are often
the vehicle type par
Hi,
please be a little more specific about the platform and versions you
use (of sumo and the external libraries).
Regards,
Michael
2013/10/20 Brij Bihari Dubey :
> Dear sir
> I am willing to use SUMO tool in my phd work. But when i am installing
> foxtool then getting the error libfox is not fou
m using Qualnet V5.
> But I am not able to generate Qualnet mobility files from sumo output.
>
> Is it possible to generate Qualnet compatible mobility files from SUMO
> output?
>
> Regards,
> Dileep
>
>
>
> On Sun, Oct 20, 2013 at 1:12 AM, Michael Behrisch
> wrot
Hi Andreas,
lane changing is undergoing a major review right now but at the
present stage there is no way to influence it (neither simulation
parameters nor traci calls apart from the existing TraCI command
changeLane).
Best regards,
Michael
2013/10/22 Andreas Witsch :
> Hi all,
>
> I have a very
Currently I am using NS3. So there is one tool called MOVE which
> generates and TCL file and trace file for NS2. Similarly,
> is there any way to generate files for NS3?
>
>
> On Wed, Oct 23, 2013 at 2:21 AM, Michael Behrisch
> wrote:
>>
>> Hi,
>> please
ailto:wohnung.in.grue...@gmail.com] On
> Behalf Of Michael Behrisch
> Sent: Tuesday, October 22, 2013 3:10 PM
> To: Meng Kuai; sumo-user@lists.sourceforge.net
> Subject: Re: [sumo-user] bus stop issue when rerouting
>
> Hi Meng,
> I had a quick look at the files and you did no
Hi,
you can do this by yourself, using the link at the very bottom of
every mail on this list (look at the very end of the page that
appears).
All the best,
Michael
2013/10/25 Chanukya Gadde :
> --
> chanukya
> --
> Octob
Hi,
the subscription period seems to be in milliseconds, we even have a
ticket for that http://www.sumo-sim.org/trac.wsgi/ticket/912. So
either use 360
as the end time or leave it out completely (or wait till we fix it).
Best regards,
Michael
2013/10/23 Andres Felipe Acosta Gil :
> Dear SUMO
Hi,
define different flows for the different phases;
http://sumo-sim.org/userdoc/Definition_of_Vehicles,_Vehicle_Types,_and_Routes.html#Repeated_vehicles
Regards,
Michael
2013/10/25 mohamed tahifa :
> hi
>
> im wondering if i can model this scenarios with Sumo
>
> so i have a junction with 4 edge
Hi Vincent,
why don't you check speed and position of the vehicle before adding
the stop? You will need to add a safe brake gap of course but you can
simply copy the code from sumo/src/microsim/cfmodels/MSCFModel.h or
ignore the discretization errors and calculate the physics of the
braking process
the bessel ellipsoid)
> --proj STR Uses STR as proj.4 definition for
> projection
> --proj.inverse Inverses projection
> --proj.plain-geoWrite geo
Hi,
I suppose you want all vehicles to start on the same road, so it is
probably the road capacity which puts the limit together with the
depart parameters. You can tweak the former by adding more lanes and
the latter are explained here
http://sumo-sim.org/wiki/Definition_of_Vehicles,_Vehicle_Types
SUMO 2014 - Modeling Mobility with Open Data
May 15 - 16, 2014 - Berlin, Germany
Call for Papers
The conference aims on presenting new and unique results in the field
of mobility simulation and modeling using openly available tools and
data.
We expect a large variety of research topics and usa
Hi,
it really depends on your definition of current travel time (i.e. your
aggregation interval). The current values are only for the last step
(and for standing vehicles infinity is about to be correct). Please
read the documentation about the detectors if you look for aggregated
values.
Best reg
Windows 8 but need to switch soon.
>
> Thank you,
>
> wilmer
>
>
> On Mon, Oct 28, 2013 at 3:07 PM, Michael Behrisch
> wrote:
>>
>> Hi,
>> somehow your ubuntu sumo was compiled without proj support. Did you
>> compile it by yourself? And if so could you s
Hi,
this is targeted at all users of subscriptions with the python
TraCI-API all the others can safely ignore this message.
At the moment all subscriptions results from the last step are cleared
once you add a new subscription. While this makes it less likely to
mix up results from the last step a
Hi,
if it really is in the standard location, configure should find it
without any further ado. What does
>ls /usr/include/gdal/ogr_api.h say? Did you install gdal and proj devel
>packages?
Best regards,
Michael
2013/11/4 无事忙 <584228...@qq.com>:
> Thanks for reading my mail~~~
>
> I want to inst
Hi,
it is not quite clear what you mean. Do you want to implement your own
lane change model?
Best regards,
Michael
2013/10/31 Maryam Zuhair Habib Al Lawati :
> Dear all sumo users:
> I'm using SUMO 0.18.0 in ubuntu 12.04
> How it is possible to apply overtaking model in SUMO? is there any build
Hi,
just a short answer:
You should be able to do most routing stuff with TraCI in the
programming language of your choice (python will be easiest because it
has the most complete API, Java is also fine).
There is no need to compile SUMO by yourself
Best regards,
Michael
2013/11/5 USC :
> Hi ,
>
nal-
> De: Igor Bilbao [mailto:ibil...@cbt.es]
> Enviado el: jueves, 31 de octubre de 2013 9:30
> Para: 'Michael Behrisch'; 'Jakob Erdmann'
> CC: sumo-user@lists.sourceforge.net
> Asunto: Re: [sumo-user] How many vehicles can simulate SUMO
>
>
Hi Pooja Voladoddi,
there are several ways to link SUMO to network simulators, you do not
have to do the TraCI implementation by yourself. Have a look here
http://sumo-sim.org/wiki/FAQ#Is_it_possible_to_connect_SUMO_to_an_external_application_.28f.e._ns-2.29.3F
Best regards,
Michael
2013/11/25 Po
Hi Peizhao,
the simulation loaded 252007 vehicles but was only able to put 75578
into the simulation (because of an early end time or because the
insertion edge was too full). By the end of the simulation there were
still 4356 vehicles in the network and 20 waiting for insertion.
To receive the fu
Which trip files do you mean?
Regards,
Michael
2013/11/24 李佩钊 :
>
>Hi,
>
>Can I get those trip files from you? If not, how can I get them?
>
>Thank you a lot!
>
>Peizhao
> --
> Shape the Mobile Experience:
Hi Bingnan,
no this is the latest nightly build. For debian releases please have a
look at the official debian repos
http://packages.debian.org/search?keywords=sumo
Best regards,
Michael
2013/11/22 Bingnan Jiang :
> Hello,
>
>
>
> I installed SUMO from
> http://download.opensuse.org/repositories/
Hi,
I would assume an OpenGL problem. If I execute sumo via an rdesktop
connection I sometimes get the same behavior. You could try to update
the driver of your graphics card but I don't know whether it really
helps.
Regards,
Michael
2013/11/19 Jéssica Reis :
>
>
> Hello you all
> I'm working on
4-bit). So if anyone is new to this and has problems , I can help
> out.
>
> Regards,
> Pooja.
>
>> On 17 ನವೆಂಬರ್ 2013, at 12:15 PM, Michael Behrisch
>> wrote:
>>
>> Hi,
>> just a short answer:
>> You should be able to do most routing stuff
Hi Peizhao,
it is hard for us as well and the cities often do not give away the data easily.
But stay tuned we will release more scenarios (not as big as Cologne but still).
Regards,
Michael
2013/11/16 李佩钊 :
>
>Hi拢卢
>
>I am an undergraduate student and doing some resarches on urban mobili
Hi,
you certainly do not need a measurement on every edge but if you have
a route in your network which is not covered by any detector than you
are out of luck with any tool and can just guess. The dfrouter itself
does some guessing, so you can simply give it a try and report your
findings. There i
.py' is not recognized as an internal or external
>> command
>> ,
>> operable program or batch file.
>>
>>
>> Could you helps on how to to automatically define Multi-Entry Multi-Exit
>> Detectors (E3)
>>
>> Thanks
>>
>>
>>
Hi,
assuming you use randomTrips.py there are the begin, end and period
options with which you can create separate trip and route files for
each of your demands and then feed them into the simulation. You
should also look at the departure options like departlane and
departpos if you come to high vo
Hi,
this is just to notify you that although we enabled OpenID support for
our bug tracking system at http://sumo-sim.org/trac we just recently
noticed that it was never functional (thanks to Mario Krumnow!) This
has been fixed now but unfortunately due to firewall constraints we
can still allow on
Hi,
maybe it is important to note that you will need to use the 64bit
version to make use of more than 2GB of RAM.
http://sumo-sim.org/daily/sumo-msvc10x64-svn.zip
Best regards,
Michael
2013/12/17 Jakob Erdmann :
> Splitting the osm file into smaller files is probably not going to help.
> The mem
Hi,
your assumptions are right, there is only one traffic light logic (or
controller) for each junction (the opposite direction is not true).
However be aware of the fact that the actual signal shown may differ
from connection to connection even for the same lane.
Best regards,
Michael
2013/12/11
Hi,
it would be also nice if you could share some code.
Best regards,
Michael
2013/12/5 Jakob Erdmann :
> Hello,
> you could try to run the same traci-query using the python client and check
> whether the result is correct. Possibly there is a problem with the way you
> interpret the byte respons
Hi,
sorry apparently no one here knows about CUBE OD matrices. Maybe you
could share an example?
Best regards,
Michael
2013/12/4 Deborah Perrotta :
> Is there an easier/less manual way of transforming an OD matrix exported
> from CUBE simulator into SUMO? The way I'm thinking of doing it is by
>
Hi,
the ubuntu repository is a voluntary effort (we are very thankful
for!) and not part of our regular release process. Usually Anton
Gladky (see CC) takes care of it, so at the moment you need to
convince him, if you need a newer version.
Best regards and thanks again to Anton,
Michael
2013/12/
Hi,
you currently cannot but there is already a ticket
http://www.sumo-sim.org/trac.wsgi/ticket/998.
Best regards,
Michael
2013/12/19 Simone Rondelli :
> Hi,
>
> How can i import Elevation data from OSM files? I have imported elevation
> data from SRTM file with Osmosis plugin and the result osm
Hi,
the problem might be a different one, sumo expects the timestep to be
in milliseconds, so you need to call it with 3500 as parameter (which
works here as expected). Furthermore before sumo 0.19.0 the --begin
option was not taken into account.
Best regards,
Michael
2013/11/21 Mani Amoozadeh :
Hi,
as far as we know there is no general editor tool publicly available,
You can edit edge attributes visually with eworld
http://eworld.sourceforge.net/ but not move nodes or edit connections
and you can of course use JOSM before importing the net.
Best regards,
Michael
2013/12/18 SEMET Yann :
Hi Anton,
thanks for taking care of this.
Best regards and happy holidays,
Michael
2013/12/21 Anton Gladky :
> Hi guys,
>
>> 2013/12/17 Anderson Rocha :
>>> Which is the version of SUMO available in ubuntu repositories? I just tried
>>> to update my packages and I'm stuck with 0.18.0.
>
> I updat
Hi Vincent,
I think both remarks are worth a ticket http://www.sumo-sim.org/trac
1. setting a new route should (at least optionally) clear the existing
stops or we need another "clear all stops" command
2. extracting stops via traci should be possible
At the moment you can only save the stops you
has been published on the new conference page
http://www.sumo-sim.org/2014/conference.html
Best regards,
the SUMO2014 conference team
2013/10/31 Michael Behrisch :
> SUMO 2014 - Modeling Mobility with Open Data
>
> May 15 - 16, 2014 - Berlin, Germany
>
> Call for Papers
>
> T
Hi,
you omitted the flow definitions in your call to jtrrouter.
Best regards,
Michael
2013/12/24 Pooja Voladoddi :
> Dummy nodes-
>
> In implementing a simple grid-like junction, is it necessary for later
> versions of SUMO (0.18) to add dummy nodes at the ends of links/edges ?
>
>
> JTRROUTER -
light per link(/lane)
> at a junction instead of one traffic light controlling all the links
> (/lanes)?
>
> Merry Christmas to all.
> -
>
> Regards ,
> Pooja.
>
>
> On Thursday, December 26, 2013, Michael Behrisch wrote:
>>
>> Hi,
>> you omitted
Hi Moritz,
you are free to implement control algorithms as complex as you wish using TraCI
(as you apparently already do). I do not understand why saving the
value to a variable does not work because this should happen on the
client (probably python) side and is not modified by Sumo at all.
Maybe
quot;
> @filerunner.py
> @author Daniel Krajzewicz
> @author Michael Behrisch
> @date2007-10-25
> @version $Id: runner.py 14678 2013-09-11 08:53:06Z behrisch $
>
> This script is a test runner for the "Hello SUMO" Tutorial.
>
> SUMO, Simulation of Urban
o about it ?
>
>
> --are dummy nodes required at the end of each link ?
>
>
>
> Regards,
> Pooja.
>
> On Friday, December 27, 2013, Michael Behrisch wrote:
>>
>> Hi,
>> flow definitions are described here:
>>
>> http://sumo-sim.org/userdoc/Def
is defining my own TAZ table
> and for this I have a doubt: do I have to define all source/destination
> edges for each TAZ or only the ones at the border between one TAZ and the
> other?
>
> Thanks in advance.
>
>
> On Thu, Dec 19, 2013 at 8:46 AM, Michael Behrisch
&
ttp://sourceforge.net/apps/mediawiki/sumo/index.php?title=Tutorials/Quick_Start
> where nodes 911 - 914 are referred to as dummy nodes that are necessary for
> traffic analysis.
>
>
> Regards,
> Pooja.
>
> On Sunday, December 29, 2013, Michael Behrisch wrote:
>>
>> Hi,
&
for reply.
>
> However, even after adding traci.simulationStep(), nothing happens.
>
> Please help me to write a simple script to add a vehicle and stop it at run
> time.
>
> Thanks & Regards,
> Monika
>
> -wohnung.in.grue...@gmail.com wrote: -
> To:
Hi,
if I remember correctly it is not a fixed distance in space but in
time (so it depends on the speed, see the article on road intersection
control here:
http://sumo-sim.org/2013/SUMO2013_15-17May%202013_Berlin-Adlershof.pdf
page 212) but you may override it using the traci speed mode command.
Hi,
there are actually some "hard coded" latin1 characters in this file,
may be they got mangled up in the release packaging although we never
had this problem before. Did you use the zip or the tar.gz? Could you
try with a fresh svn checkout (which is always a good idea when trying
to develop on s
ith checkout to download it again and build it new?
>
>
> Regards,
> Moritz
>
> -Original Message-
> From: wohnung.in.grue...@gmail.com [mailto:wohnung.in.grue...@gmail.com] On
> Behalf Of Michael Behrisch
> Sent: Monday, December 30, 2013 4:28 PM
> T
Hi Moritz,
the step is indeed useless (step += 1 was used to count the simulation
steps but it is not evaluated in this script as far as I can see). The
source code for traci.simulationStep is in
sumo/tools/traci/__init__.py.
May I ask what your plans are in extending sumo and/or traci?
Best regar
pp were some quotation marks
> missing. I added them and after this it was completely built.
>
> Thanks,
>
> Moritz
>
> -Original Message-
> From: wohnung.in.grue...@gmail.com [mailto:wohnung.in.grue...@gmail.com] On
> Behalf Of Michael Behrisch
> Sent: Wednes
Hi Joerg,
you are right, the scripts are no longer maintained. We started a C++
variant of the assignments methods but it is not public (and not
finished) yet.
Best regards,
Michael
2014/1/6 Joerg Schweizer :
> Dear all,
> I messed around with the macro assignment methods in tools/assign
> and it
Hi,
I don't know the meaning of all parameters but I suppose you are
trying to set a stop at position 0 and you are already behind position
0 and thus will not be able to stop there.
Best regards,
Michael
2013/12/31 Simone Rondelli :
> Hi all,
>
> I'm tryng to stop the vehicle using traci. Traci
fine "vehicle type ID", "speed" , "accel" and "decel"
> parameter values for cars in flows file? Since rou.xml is the output file
> when using JTRrouter I don't know where to specify the aforementioned
> parameters.
>
> Regards,
>
>
e stops.
>
> There is a more elegant way to do this.. For exaple for sayng "stop in this
> road" without position problem? If not i hope that this code can help
> someone else!
>
> Kind Regards,
> Simone Rondelli.
>
> 2014/1/9 Michael Behrisch
>>
>>
Hi,
its a known problem with the 0.19 release
http://sourceforge.net/mailarchive/forum.php?thread_name=05149081-66F9-43BF-9C16-3ED5EA7579AB%40uni.lu&forum_name=sumo-user
Please download a nightly snapshot and replace the affected file.
Best regards,
Michael
2014/1/9 Amir Meshkat - TBM :
> Dear S
Hi,
the answer may be too obvious: http://en.wikipedia.org/wiki/Addition :-)
Best regards,
Michael
2014/1/10 mohamed tahifa :
> hey everybody
>
> i want to calculate how many vehicles passed a detectors in a period T ,
> the function *getLastStepVehicleNumber*(loopID)
> calcul the number of vehic
Hi Pieter,
Am 2014-01-11 13:49, schrieb Pieter Loof:
> Question: is it true that the only way to get my own vehicle types on
> the
> road using DFRouter is by putting my vehicle types in one or two
> vTypeDistributions which I name PKW and LKW?
Yes it is.
> But there is a problem with this:
> 1
with Sumo, and they can be run via its Ant buildfile.
> I have little experience with nightly builds management, but I'm glad
> to give a little help.
>
> Best regards,
> Enrico
>
>
> [1] https://github.com/blog/626-announcing-svn-support and
> https://github.com/blog
://moreevent.meetingmasters.de/moreEvent-dlr-sumo2014/public/event/570/home
Best regards and see you in Berlin,
the SUMO Conference team
> 2013/10/31 Michael Behrisch :
>> SUMO 2014 - Modeling Mobility with Open Data
>>
>> May 15 - 16, 2014 - Berlin, Germany
>>
>> Call for Pap
Hi Fahd Malik,
> Hi can you please remove me from this mailing list? Thanks!
if it did not happen yet you can unsubscribe yourself by clicking on the
link at the very bottom of this mail scrolling to the end of the page
and entering your adress in the unsubscribe field.
Best regards,
Michael
-
Hi,
> I don't understand : traci.edge.getFuelConsumption is equal to zero even if
> the rate of Occupancy is not equal to zero and there are no stopped
> vehicles.
It's hard to tell without looking at the scenario but maybe all vehicles
are decelerating. If you assume a bug, please post a bug rep
Hi,
Am 07.02.2014 13:04, schrieb Marc René Zofka:
> is it possible to access a running sumo server with the gui itself and
> one more traci-client?
Yes, it is.
> I just tried to call
>
> sumo-gui --remote-port 1024
you need to include the network as with your sumo example below (maybe
an empt
Hi,
Am 04.02.2014 20:04, schrieb Urvik Upadhyaya:
> I'm getting two errors while building xerces-c library.
> One is no such file or directory error and another one is parsers error.
> Any particular reason for this?
> I'm following the instructions given in sumo wiki page.
there is no need t
Hi,
sorry for the delay
Am 15.01.2014 12:01, schrieb mohamed tahifa:
> i want to calculate with traci how long a vehicle has been in a edge to
> calculate the waiting time of each vehicle in a edge to pass through it if
> anyone can help with an idea and thank you
>
The best thing is possibly to
Hi,
sorry for the delay, here is short answer:
Am 20.01.2014 23:33, schrieb vb...@bath.ac.uk:
> With the recently introduced change lane preference behaviour
> available via traci, is there a way to specify this in the xml file
> for the sim as well, i.e. in a vType definition?
no it is not
Hi,
Am 04.02.2014 14:12, schrieb Urvik Upadhyaya:
> Is there any easier way to add traffic to osm maps? I mean I've converted osm
> file into net.xml file but I need to generate traffic for the scenario.
> Do I have to make flow file and study whole map or is there any other
> shortcut?
It is
Hi,
you can put arbitrary routes into sumo which you can calculate yourself
but I suppose you wanted to know what the existing routers support.
It is possible to give edge weight files to the duarouter
http://sumo-sim.org/userdoc/Demand/Shortest_or_Optimal_Path_Routing.html#Custom_edge_weights
so i
Am 04.02.2014 15:14, schrieb jaskaran singh:
> Hello
> can u guide how can i enter flow in my simulation using binomial distribution.
Just as Jakob said, throw a die on every simulation step whether you
want a vehicle to enter or not, then the number of vehicles will be
binomially distributed.
It
Am 04.02.2014 14:25, schrieb Pieter Loof:
> I have a program that generates a file with detector definitions and a file
> with detector measurements based on real data. I have used these file types
> as input before in a testing phase, it then worked correctly.
Which version of dfrouter did you us
Hi Pieter,
actually I would consider this behavior a bug, could you share your
scenario please. Concerning the documentation:
1. You are absolutely right and we will try to improve this, but our
time is limited and
2. This is an open project, feel free to contribute to the documentation
as well :-)
Hi Pieter,
Am 04.02.2014 15:03, schrieb Pieter Loof:
> When I use the detector speed measurements as departure speed of cars, the
> simulation quits with an error on startup, because DFRouter created trucks
> with a departure speed that is higher than the maximum speed of trucks. An
> alternative
Hi Pieter,
Am 2014-02-17 10:39, schrieb Pieter Loof:
> I use DFRouter to generate the vehicles from detector definitions.
> Those
> detectors usually record all vehicles together, so they do not
> distinguish
> different vehicle types.
That really depends on the detector you use. Most of the mo
Hi Pieter,
thanks for bringing this up
Please see here:
http://sumo-sim.org/userdoc/FAQ.html#How_do_I_report_Erroneous_behavior_of_a_SUMO-Application.3F
so in short send us all the files needed to reproduce the error.
If you don't want to use trac, zip them or just attach the plain files
to a mail
Hi Eric
Am 18.02.2014 00:34, schrieb Eric Lienert:
> I was wondering how to manually instantiate vehicle within the route
> description file. I looked at the vehicle documentation but I did not
> completely understand how it functions. Lastly, do the vehicles move
> throughout th
Hi Vincenzo,
Am 13.02.2014 16:10, schrieb vincenzo perrone:
> I suppose that the net file given as input to OD2TRIPS should be the one
> including the districts definitions,
> so OD2TRIPS could generate the trips considering all the edges
belonging to the network, right?
The file needs to contai
Hi Vincenzo,
> 1) I noticed that the extension of the file in PTV is *.FMA: does it >
make difference saving my file as an *.xml one? Is, however, OD2TRIPS >
able to read the data in the file in both extensions?>
No the extension does not matter.
> 2) When I give the command
>
> -n -d -o
>
>
Hi Nicolas,
you cannot place the rerouter on the same edge you wish to close,
because the rerouter is triggered when the vehicle enters the edge and
obviously it is too late to choose a different one then. So change your
edges attribute to point to edges before the closed one.
Best regards,
Michae
Hi,
please use python 2.7.
Best regards,
Michael
Am 28.02.2014 14:39, schrieb Yoshida Tomokazu:
> Hello,
>
> I sent the email below before the registration completed.
> Thus I would like to send this email again just for confirmation.
>
> Best Regards,
>
> Tomokazu Yoshida
>
> -- Forw
Hi Bryan,
we already compiled fox with MSVC10 and did not notice anything special
(when building only the lib). Can you send the full log also of the sumo
build?
Best regards,
Michael
Am 28.02.2014 15:11, schrieb Bryan Anderson:
> Short update:
> Now succeeded in converting Fox from MSVC6 proje
Hi Mani,
Am 02.03.2014 03:20, schrieb Mani Amoozadeh:
>It seems that it tries to validate my XML file, and fails. I created an
>environment variable in .bashrc (Ubuntu 12.04 LTS) as following, but I am
>still receiving the warning:
>SUMO_HOME=$HOME/Desktop/SumoSVN
This one looks c
Hi,
thanks for pointing this out. It was only wrong in case of an error
message and is fixed now in svn.
Best regards,
Michael
Am 02.03.2014 02:24, schrieb Mani Amoozadeh:
>
>Hi,
>In [1]changing the color of a vehicle, the value of the command response
>seems incorrect. SUMO sends ba
Hi Christoph,
it sounds right what you are doing. Which platform, which sumo version
and which client (python, java, ...) are you using? Please post your
precise commands as well.
Best regards,
Michael
Am 01.03.2014 20:34, schrieb Christoph Rist:
> Dear All,
> I'm running sumo-gui with the "" op
Hi Matteo,
it is not possible to specify for the outputs that they should contain
only a subset of the available data. Are you concerned about file sizes
or just looking for an easier of parsing? In the latter case have a look
at sumolib.output.parse_fast
http://sumo-sim.org/pydoc/sumolib.output.ht
1 - 100 of 592 matches
Mail list logo