Re: [Ubnt_users] Rocket M5 vs Rocket M5 AC Lite

I just checked the 5.6 beta software, even the 5.15-5.25GHz isn't in there yet. I was more than willing to test it today for a government agency but no, had to drop to 5Mhz channels to get this link up. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On

Re: [Ubnt_users] Odd things happening

Replace it or the power supply if you have tested the cable already. Don’t waste your time trying to figure it out. If I’m wrong, then you have your work cut out for you. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Mike Hammett Sent:

Re: [Ubnt_users] Rocket M5 vs Rocket M5 AC Lite

M5 AC Lite Didn't cambium get it done reasonably quickly? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Oct 24, 2014 11:45 PM, Rory Conaway r...@triadwireless.net wrote: You know what I find funny is that everybody blames Ubiquiti and nobody

Re: [Ubnt_users] Rocket AC Multi Point

Point There are definitely more limitations with 2.4GHz...but there are some performance benefits you can get out of it still... On Mon, Oct 27, 2014 at 4:36 PM, Rory Conaway r...@triadwireless.net wrote: Your answer posted at the same time. Is my analysis correct? Rory From

Re: [Ubnt_users] Rocket 5 AC trial was a bust.....

of its limited freq band. And it doesn’t seem to handle noise as well as the 5M From: Rory Conaway mailto:r...@triadwireless.net Sent: Saturday, November 01, 2014 1:22 PM To: Ubiquiti Users Group mailto:ubnt_users@wispa.org Subject: Re: [Ubnt_users] Rocket 5 AC trial was a bust

Re: [Ubnt_users] NanoBeam M5 400

- Original Message - From: Rory Conaway r...@triadwireless.net To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Sunday, November 2, 2014 6:56:03 PM Subject: Re: [Ubnt_users] NanoBeam M5 400 Tone down the hysteria guys. The FCC certifies manufacturers in batch. When Ubiquiti had to pull

Re: [Ubnt_users] NanoBeam M5 400

costing me more ordering small quantities from a random supplier and shipping it across the country. On Sun, Nov 2, 2014 at 9:31 PM, Rory Conaway r...@triadwireless.net wrote: Look, Ben and Matt are on this board. If you have

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

: [Ubnt_users] XW firmware on Nanostation 5M Locos? Just had that happen on a RocketM5. I can't keep up. On Nov 9, 2014, at 7:11 PM, Rory Conaway r...@triadwireless.net wrote: Can I assume that all the NS5M Locos now have the same processors

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Rory Conaway [r...@triadwireless.net] Sent: Sunday, November 09, 2014 6:51 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] XW firmware on Nanostation 5M Locos? We can't use them yet until DFS, all our APs are there. Rory From: ubnt_users

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 10, 2014 6:03 PM, Rory Conaway r...@triadwireless.net wrote: I'm trying to figure out why they use XW firmware when other nanostations use xm firmware. If they have faster

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

on it is going to have the newer, faster processor. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Rory Conaway [r...@triadwireless.net] Sent: Monday, November 10, 2014 5:47 PM To: Ubiquiti Users Group

Re: [Ubnt_users] XW firmware on Nanostation 5M Locos?

: [Ubnt_users] XW firmware on Nanostation 5M Locos? Yep, the last normal Rocket M5's I got are XW. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Rory Conaway [r...@triadwireless.net] Sent: Tuesday, November 11, 2014 9:53 AM

Re: [Ubnt_users] Rocket AC Multi Point

...but there are some performance benefits you can get out of it still... On Mon, Oct 27, 2014 at 4:36 PM, Rory Conaway r...@triadwireless.net wrote: Your answer posted at the same time. Is my analysis correct

Re: [Ubnt_users] Speed test no working

Just get everything on 5.5.10. No reason not to. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Jerry Richardson (airCloud) Sent: Sunday, November 16, 2014 12:01 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Speed test no working We

Re: [Ubnt_users] Quick question on XM XW firmwares

Make sure they are in the same subnet also. For some reason, if two radios are in different subnets, even if they are in bridge mode, they won’t connect. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Eduardo Sent: Thursday, November 27, 2014

Re: [Ubnt_users] New airControl

I think I’d be happy if AirControl just supported all the hardware they sell and if the AirGateway firmware gets out of Beta before the Cubs win the World Series. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Mathew Howard Sent: Tuesday,

Re: [Ubnt_users] New airControl

Guys, you have good points. I believe though, the problem here isn't just the product, it's the message. The reality is that it wouldn't take that many more resources to finish and update AC2. I thought it had a bunch of bells and whistles I could have lived without and that functionality was

Re: [Ubnt_users] Speed test no working

From: Rory Conaway mailto:r...@triadwireless.net Sent: Sunday, November 16, 2014 12:02 PM To: Ubiquiti Users Group mailto:ubnt_users@wispa.org Subject: Re: [Ubnt_users] Speed test no working

Re: [Ubnt_users] Old Rockets, weird problems

Set the frequency list to what range you need before you reboot. rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Sunday, December 7, 2014 12:09 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Old Rockets, weird problems

Re: [Ubnt_users] Old Rockets, weird problems

I’ve upgraded every Rocket and haven’t seen the problem. Might be an issue with the RF sections failing at the perimeter. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Sunday, December 7, 2014 11:48 AM To: Ubiquiti Users

Re: [Ubnt_users] AirControl 2 passwords

Reflash the units with the latest firmware. I haven't seen this specific issue but I've seen SSH and some other random things that get solved this way. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of heith Sent: Tuesday, December 9, 2014 9:02 AM

Re: [Ubnt_users] Rocket ACs

I might have missed this but does the AC product line support U-NII 1 and DFS? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ben Moore Sent: Tuesday, December 9, 2014 5:42 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Rocket ACs

Re: [Ubnt_users] Rocket ACs

...but they will. On Wed, Dec 10, 2014 at 1:12 AM, Rory Conaway r...@triadwireless.net wrote: I might have missed this but does the AC product line support U-NII 1 and DFS? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ben Moore Sent: Tuesday, December 9

Re: [Ubnt_users] Rocket ACs

Are the AC products shipping yet? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ben Moore Sent: Thursday, December 11, 2014 10:00 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Rocket ACs Sorry, this one got lost in the mix of

Re: [Ubnt_users] Rocket ACs

Group Subject: Re: [Ubnt_users] Rocket ACs The R5AC-LITE and PBE-5AC-500 are in channel. The NBE-5AC-19, R5AC-PTP and PBE-5AC-620 start this month... On Thu, Dec 11, 2014 at 10:51 AM, Rory Conaway r...@triadwireless.net wrote: Are the AC products shipping yet? Rory From

Re: [Ubnt_users] Happy Green Friday!

labor for replacing bad cable? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 12, 2014 11:18 PM, Rory Conaway r...@triadwireless.net wrote: The gift that keeps on giving. I’ve got about 4 more to change out at a labor cost of $16 per hour

[Ubnt_users] two suggestions for features

One the stations screen, it would be interesting to add this option -Click the MAC address of the connected device and get the manufacturer and the best guess on distance to the device.\ It would help to kick off next door neighbors. rory

Re: [Ubnt_users] Rocketm900

Blair, did you use RF Armor shield kits? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Blair Davis Sent: Tuesday, December 30, 2014 10:32 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Rocketm900 yes. 2 omnis on different polarity's.

Re: [Ubnt_users] High ping times with Ubiquiti AC 7.2.2.3

mtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net<mailto:supp...@snappytelecom.net> ________ From: "Rory Conaway" <r...@triadwireless.net<mailto:

[Ubnt_users] High ping times with Ubiquiti AC 7.2.2.3

I've got a user that isn't even a few hundred feet on a Rocket 5 AC-Lite. Most users on this AP can pull 50-60Mbps with no problem. This user is getting 2-4Mbps down and 18 up. Ping times are all over the place to as much as 107ms. We changed the radio, no difference. Rory Conaway * Triad

Re: [Ubnt_users] Aggregate Download Capacity Real TCP on AirMax-Mx Radios

The other thing you have to look at is packets per second which is probably the single most important factor. For example, with the older 400MHz processors, somewhere around 22,000pps was pretty close to a hard limit. With AirMax and 64-bit packets you were limited to around 40Mbps at the AP.

Re: [Ubnt_users] AC2 Install

I thought you could do a direct upgrade and it migrates the data. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Shawn Burgei Sent: Tuesday, July 12, 2016 1:04 PM To: 'Ubiquiti Users Group'; members-boun...@wispa.org Subject: [Ubnt_users] AC2 Install

[Ubnt_users] Does the UVC Pro camera have an external audio port

Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542 r...@triadwireless.net<mailto:r...@triadwireless.net> www.triadwireless.net<http://www.triadwireless.net/> "There are only two seasons - winter and Baseba

Re: [Ubnt_users] Rocket 5 prism

] Rocket 5 prism Rory, Yes the Rocket 5AC-PTMP does not do the 5.1 band, it has the plastic case with no GPS Antenna port. Garth - Original Message - From: Rory Conaway Sent: 8/2/2016 9:51:06 PM To: ubnt_users@wispa.org Subject: [Ubnt_users] Rocket 5 prism > Was there a vers

[Ubnt_users] Rocket 5 prism

Was there a version that was limited to 5.4GHz as the lower band or has it always covered the entire 5GHz band? Does it work with N clients like the Rocket 5ac-Lites? Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542 r...@triadwireless.net<mailt

Re: [Ubnt_users] Does the UVC Pro camera have an external audio port

have an external audio port No not sure why you would want one. Its all IP based Steve Barnes Wireless Operations Manager PCSWIN.COM NLBC.COM From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Rory Conaway Sent: T

Re: [Ubnt_users] Does the UVC Pro camera have an external audio port

users@wispa.org<mailto:ubnt_users@wispa.org>> Subject: Re: [Ubnt_users] Does the UVC Pro camera have an external audio port Yes, it does. There's a harness connector with the port exposed. On Wednesday, August 3, 2016, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net

Re: [Ubnt_users] Massive Random Interference spikes on R5-AC-PTP backhaul.

Are you using Jirous dishes? They work down to 5.1GHz. Just assume you are losing a few dB. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of David Jones Sent: Tuesday, July 19, 2016 11:40 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Massive

[Ubnt_users] Air Control annoyance with reconnect now

option on there and just ignore the devices that are popping in and out on the connection. Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542 r...@triadwireless.net<mailto:r...@triadwireless.net> www.triadwireless.net<http://www.triadwireless.net/>

Re: [Ubnt_users] AC2 and device(s) with outdated firmware

We were trying to migrate but just having trouble with the software itself. We will try again today. I'm wondering now if it AC2 Beta 22 works with the various versions of beta software we have running. Rory -Original Message- From: ubnt_users-boun...@wispa.org

[Ubnt_users] Missing feature from the Airrouters in 6.0

away which it needed to do but at least they wouldn't connect. The threshold setting is gone from 6.0 and of course, here come the tech calls about slow speeds. Now I've got to go back and change all my AirRouters back to 5.5.9. Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix

Re: [Ubnt_users] Water leak - 6 yr old NanoStation

.facebook.com/brough.turner> | Blog<http://blogs.broughturner.com/> | Personal website<http://broughturner.com/> On Fri, Feb 17, 2017 at 2:03 PM, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: We watched woodpeckers do this. Had to m

Re: [Ubnt_users] Water leak - 6 yr old NanoStation

We watched woodpeckers do this. Had to make sure we mounted the lights below the top of the J-Mount so they couldn’t stand on something. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Kees H Sent: Friday, February 17, 2017 11:17 AM To: Ubiquiti

[Ubnt_users] FW: Ubiquiti Networks, Inc.: Invoice #To Be Generated

Here is one we submitted last week for example. Rory From: UBNT RMA [mailto:r...@ubnt.com] Sent: Thursday, February 23, 2017 5:33 PM To: Rory Conaway Subject: Ubiquiti Networks, Inc.: Invoice #To Be Generated [https://ci3.googleusercontent.com/proxy/5FTNZehSGM8epHL_7sv-2gADMCwbSWKZCHkRGIu

Re: [Ubnt_users] Really liking that new return policy

Samsung Galaxy smartphone Original message ---- From: Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> Date: 2/23/17 11:29 PM (GMT-05:00) To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>> Subject: Re: [Ubnt_users] Really liki

Re: [Ubnt_users] Really liking that new return policy

To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Really liking that new return policy This doesn't sound good... If we have track each piece of equipment to its invoice... :( We just don't have the people for that. And no warning. On Feb 23, 2017 11:22 PM, "Rory Conaway" <r...@tria

Re: [Ubnt_users] FW: Ubiquiti Networks, Inc.: Invoice #To Be Generated

Networks, Inc.: Invoice #To Be Generated Taking a look in this one. On Feb 24, 2017 10:51 AM, "Ben Moore" <ben.mo...@ubnt.com<mailto:ben.mo...@ubnt.com>> wrote: Was this one rejected? James - can you check on this one and see what issue is? On Thu, Feb 23, 2017 at 9:2

Re: [Ubnt_users] V6 and v8

For the most part, no problems. Still having issues with random xw radios not connecting to xw APs. Ubiquiti is looking at it. Rory -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Shawn C. Peppers Sent: Tuesday, January 17, 2017

Re: [Ubnt_users] nanobridge to what in the ac line?

Powerbeam 400AC Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of CBB - Jay Fuller Sent: Wednesday, March 1, 2017 10:25 PM To: Ubiquiti Users Group Subject: [Ubnt_users] nanobridge to what in the ac line? Which product is most similar to size and gain

Re: [Ubnt_users] FW: Ubiquiti Networks, Inc.: Invoice #To Be Generated

My office is sending you all the RMA’s, when they were submitted, and when we got a response. Rory From: Ben Moore [mailto:ben.mo...@ubnt.com] Sent: Monday, February 27, 2017 11:04 AM To: Rory Conaway Cc: Ubiquiti Users Group Subject: Re: [Ubnt_users] FW: Ubiquiti Networks, Inc.: Invoice

Re: [Ubnt_users] 6.0 Firmware not showing Device Names of clients on APs

hern CA. On 2/25/2017 5:17 PM, Rory Conaway wrote: Anyone else having this issue? Rory Conaway • Triad Wireless • CEO 4226 S. 37th Street • Phoenix • AZ 85040 602-426-0542<tel:%28602%29%20426-0542> r...@triadwireless.net<mailto:r...@triadwireless.net> www.triadwireless.net<http://w

Re: [Ubnt_users] Bad Omni???

We had two of the 2.4GHz Ubiquiti Omnis with issues. One the cap on top blew off, bad glue. The other one, the screws at the bottom worked their way out and it slid down the bracket. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of RickG Sent:

Re: [Ubnt_users] M5 Rocket XM to XW issue

Install the latest firmware and see if you have the same problem. I have seen it with beta software but not with released versions. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of ty...@wigi.us Sent: Monday, September 26, 2016 7:22 AM To: Ubiquiti

Re: [Ubnt_users] POE POWERED SWITCHES

What about temperature? 113 degrees in is in the shade here in Phoenix and according to the specs, it drops to 100W at 131 which is pretty much normal for us, even in boxes with fans. The DC one goes higher though, but haven’t checked the price. The Netonix stuff is lasting pretty well for

Re: [Ubnt_users] POE POWERED SWITCHES

Too bad they can't do 48v. that would be on my next wish list. -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Brian - Winters Broadband Sent: Friday, September 16, 2016 8:28 PM To: 'Ubiquiti Users Group' Subject: Re: [Ubnt_users]

Re: [Ubnt_users] Backhaul Radios freeze on Station side

I had pretty much the same situation with 5.5.9. Change the hardware but still get the latest firmware. Rory -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of t...@byhalia.net Sent: Monday, November 7, 2016 11:03 AM To:

Re: [Ubnt_users] Great CCQ, AMC, AMQ, etc. shit throughput

Oops, meant Mike. Are you going through a wall? Rory -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Rory Conaway Sent: Thursday, November 24, 2016 3:36 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Great CCQ, AMC, AMQ

Re: [Ubnt_users] New UniFi Outdoor 11AC APs Coming Soon!

Yea, if that is if you use the 5GHz only for backhaul and it can maintain maximum modulation. In the real world, if any user connects to those APs on 5GHz, especially with weak signals, then the bandwidth speeds will drop fast. I was wondering how the mesh works on best path analysis and

Re: [Ubnt_users] WAN Port Goes to Sleep on PowerBeam M5

> > > > Josh Luthman > > Office:937-552-2340 > > Direct:937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > On Wed, Nov 2, 2016 at 11:55 AM, Rory Conaway <r...@triadwireless.net > <mailto

Re: [Ubnt_users] WAN Port Goes to Sleep on PowerBeam M5

It's either a grounding issue or a bad radio. More than likely you just want to replace it. Rory -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Sam Morris Sent: Wednesday, November 2, 2016 8:48 AM To: ubnt_users@wispa.org

Re: [Ubnt_users] armored cat6 outdoor cable

We have had rabbits chew through ours. Can't run cables along the ground unless it's trenched out here. Rory -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Tommy Adams Sent: Thursday, January 12, 2017 2:47 PM To: Ubiquiti Users

Re: [Ubnt_users] Reboot problem when connecting to AP

, Samsung Galaxy smartphone Original message From: Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> Date: 12/28/16 11:34 AM (GMT-06:00) To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>> Subject: Re: [Ubnt_users] Reboot

Re: [Ubnt_users] Airfiber 5x power consumption

I think you are thinking of the AF24’s. They draw quite a bit more. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, January 5, 2017 5:25 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Airfiber 5x power consumption

Re: [Ubnt_users] Firmware Releases

experiences so far: 8.0 is stable 6.0 is stable running on 5GHz only. 2.4GHz and 900MHz AP/cpes will randomly disconnect or goto sleep. Downgrading it back to 5.6.9 fixed it for us. Ubiquiti is reviewing some support files I sent em. On 12/20/2016 10:09, Rory Conaway wrote: > > We start

Re: [Ubnt_users] Firmware Releases

We started deploying RC3 and ran into major issues. Our phones exploded with complaint of disconnection and slow service. It took us days to put beta 15 and 19 back on and a lot of visits to houses that wouldn't reconnect. I'll wait until it's been out for a little while. Rory From:

Re: [Ubnt_users] Firmware Releases

Of Rory Conaway Sent: Thursday, December 22, 2016 10:42 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Firmware Releases We ran a small test by upgrading the client first and the Rocket 5AC Lite last. So far it seems to be working for the first 10 users. We are going to slowly expand

Re: [Ubnt_users] Firmware Releases

wisp.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png]<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> From: "Rory Conaway" <r...@triadwireless.net<mailto:r..

Re: [Ubnt_users] Firmware Releases

tps://twitter.com/mdwestix> The Brothers WISP<http://www.thebrotherswisp.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png]<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> __

Re: [Ubnt_users] Firmware Releases

I just test it with an XM Rocket 5M. All clients on beta 15. 41 users online. After installation, 18 users came up. Went back to Beta, 41 users online again. I'm not sure if I have to make all the clients 6.0 first but I do know that this is exactly what we saw with RC3 and we had to go to

Re: [Ubnt_users] Reboot problem when connecting to AP

? Are you saying you tried 5.6.2 to 5.6.9 and a couple of betas on the AP? Is the AP an XM version? What firmware versions are on the CPE? Don't suppose there is a ping watchdog on the AP. On Tue, December 27, 2016 10:42 pm, Rory Conaway wrote: > We tried 3 different PB400 nose cones, a N

Re: [Ubnt_users] Reboot problem when connecting to AP

Here is one other funny thing. We pointed one of the radios to a different AP. Came right up, no reboot. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Rory Conaway Sent: Tuesday, December 27, 2016 10:33 PM To: Ubiquiti Users Group Subject: Re

Re: [Ubnt_users] Reboot problem when connecting to AP

ke you are describing usually lead back to a wire in my exp or even possibly a poe. Id double check the wire tho if its isolated to one location and tried a handful of different cpe's Sent from my Verizon, Samsung Galaxy smartphone Original message From: Rory Cona

Re: [Ubnt_users] Firmware Releases

experiences so far: 8.0 is stable 6.0 is stable running on 5GHz only. 2.4GHz and 900MHz AP/cpes will randomly disconnect or goto sleep. Downgrading it back to 5.6.9 fixed it for us. Ubiquiti is reviewing some support files I sent em. On 12/20/2016 10:09, Rory Conaway wrote: > > We s

Re: [Ubnt_users] Rocket M5 AC

Actually, that’s a great question. More specifically, other than the fact that the AF-5X can go to 512 or 1024Q, can’t remember which, which one has better filtering and adjacent spectrum interference rejection. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On

Re: [Ubnt_users] bracket for omni amo-2g13

In a pinch, use hose clamps or if you size it out you can buy U-Bolts. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Duane Cox Sent: Friday, March 24, 2017 6:47 AM To: 'Ubnt_users@wispa.org' Subject: [Ubnt_users] bracket for omni amo-2g13 I'm

Re: [Ubnt_users] 6.0.1 performance

That would be the difference between PHY layer and MAC layer throughput. Sometimes it’s the processor, other times it’s interference. In the case of AC-Lites, I would think more interference issues, the processor is pretty quick. Rory From: ubnt_users-boun...@wispa.org

[Ubnt_users] AirControl can't update AirGateways

. Any idea what's happening? Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542 r...@triadwireless.net<mailto:r...@triadwireless.net> www.triadwireless.net<http://www.triadwireless.net/> "An optimist will tell you the glass is half-full; th

Re: [Ubnt_users] AC Gen2 question

Are there any hard numbers to compare it with the Prism radios? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Jeremy Smith Sent: Thursday, March 23, 2017 9:20 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] AC Gen2 question Gen2 hardware has a

[Ubnt_users] 6.03 firmware still has some bugs

on the backhaul even though signal levels were the same, -54/-55dBm. Even worse, throughput went to 1Mbps or less. We change it back to 6.0 and wham, everything goes back to normal. Not sure what's going on be we are going back to 6.0 on all APs and backhauls. Rory Conaway * Triad Wireless * CEO 4226 S

[Ubnt_users] Why doesn't AirControl recongnize these AirGateways?

I can log in an update them manually. Just can't do it in AirControl. There are only a few of them with this issue, about 5% or less, and all of them have 1.16 on them. I tried 1.17 and 1.19 and the options stay blank. Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ

Re: [Ubnt_users] 4096 QAM (was: 24Ghz link Airfiber)

Wow, you are dead on Faisal. Govnet is filing for everything they can find in Arizona now with absolutely no customers and no chance of getting customers. Even if customers were there, they don't have a sales division, don't answer the phone, and don't respond to email. This is what happens

Re: [Ubnt_users] Airfiber sale?

It was $199 when we got there and we are registered as business. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Roy Sent: Thursday, April 20, 2017 10:32 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Airfiber sale? Amazon has different

Re: [Ubnt_users] 4096 QAM (was: 24Ghz link Airfiber)

link Airfiber) I'll say it again: The traffic loading requirements leave the squatters open to a legal challenge. On Fri, Apr 14, 2017 at 9:31 PM, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: Wow, you are dead on Faisal. Govnet is filing for everyth

Re: [Ubnt_users] 4096 QAM (was: 24Ghz link Airfiber)

pseudorandom carriers. I suspect that defense has managed to refute some accusations of underutilized links. Nowadays, you'd need archived traffic data to prove anything (which would be trivial to fake, if you happened to be faced with an unethical turdbag). On Sat, Apr 15, 2017 at 10:09 AM, Rory

Re: [Ubnt_users] ISSUE AirRouter

That’s weird guys, We’ve done hundreds of radios and haven’t seen the issue including 900Mhz where we believe there was an improvement. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of RickG Sent: Friday, March 3, 2017 5:36 PM To: Ubiquiti Users Group

Re: [Ubnt_users] UBNT 6.0.6 WARNING

What is the reason for this? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Mike Hammett Sent: Friday, July 07, 2017 12:14 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING What change is needed on how

Re: [Ubnt_users] 6.0.6 isn't an upgrade, it's a legal brick

Can you clarify what regulatory requirement states that you have to prevent other software from running on your hardware? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of UBNT SNK Sent: Monday, July 10, 2017 5:55 PM To: ubnt_users@wispa.org Subject:

Re: [Ubnt_users] Airfiber sale?

I bought 2 at that price for testing. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Clay Stewart Sent: Friday, April 21, 2017 9:54 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Airfiber sale? $199 for me on Prime On Thu, Apr 20, 2017 at

Re: [Ubnt_users] duplicate IPs

Put a windows computer on the network. It will post in event viewer with MAC addresses. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Adair Winter Sent: Friday, August 18, 2017 2:35 PM To: Ubiquiti Users Group Subject: Re:

Re: [Ubnt_users] Power Beam M5 question

I’ve upgraded most of ours, I haven’t seen any issues. I didn’t test or look for any improvements though. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Chris Soiles Sent: Saturday, September 16, 2017 10:57 AM To: Ubiquiti Users Group

Re: [Ubnt_users] NBE-5AC-Gen2 firmware

8.3.2 From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Eduardo Sent: Tuesday, September 5, 2017 8:40 AM To: Ubnt_users@wispa.org Subject: [Ubnt_users] NBE-5AC-Gen2 firmware We got our new NBE-5AC-Gen2 radios with v8.1.2 and looking for recommendation about

Re: [Ubnt_users] aircontrol won't find 6.0.4 devices

How do you add them manually? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of CBB - Jay Fuller Sent: Saturday, September 2, 2017 9:00 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices having to add each radio

Re: [Ubnt_users] Airmax 5.6.9 Upgrade to 6.1.2

We have been upgrading as fast as reasonably possible to 8.4 and 6.1 with all other firmwares mixed in. All our radios are in simple bridge or routed mode with no VLANs, PPPoe, or any other things that many of you use. In this environment, we have seen zero issues with all the firmwares from

Re: [Ubnt_users] 60 Gigs ???

We have 2 links running with 2 more going in as fast as we can get to them. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Mike Hammett Sent: Monday, December 4, 2017 7:54 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] 60 Gigs ??? My network

Re: [Ubnt_users] aircontrol won't find 6.0.4 devices

ct: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices Well for us it is because we are elevating our units. I also hate the locked firmware at and after 6.0.6 On Fri, Nov 17, 2017 at 10:21 AM, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: Why are you s

Re: [Ubnt_users] aircontrol won't find 6.0.4 devices

Why are you still running 6.0.4? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Troy Gibson, Byhalia.net,LLC Sent: Friday, November 17, 2017 5:31 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4

Re: [Ubnt_users] cannot find interference source

Could still be noise. Canopy and AFx equipment won't show up in the noise figures. Rory -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Jan-OOLLC Sent: Tuesday, December 05, 2017 11:07 PM To: Ubiquiti Users Group

Re: [Ubnt_users] cannot find interference source

ery apparent in AirView. Phil On Wed, Dec 6, 2017 at 9:52 AM, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: Could still be noise. Canopy and AFx equipment won't show up in the noise figures. Rory -Original Message- From: ubnt_users-boun...@wis

Re: [Ubnt_users] AF5x radio on dishes

What does airview show? Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Mitch Sent: Saturday, October 21, 2017 4:44 PM To: Ubiquiti Users Group; Adair Winter Subject: Re: [Ubnt_users] AF5x radio on dishes Adair have 3 foot clear fresnel (20 feet

Re: [Ubnt_users] UBNET 900Mhz

It’s not too bad. We have one up, might put up a second one. Rory From: ubnt_users-boun...@wispa.org On Behalf Of RickG Sent: Tuesday, May 29, 2018 8:58 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] UBNET 900Mhz Cambium 450i 900 is very pricey! On Tue, May 29, 2018 at 12:56 PM,

  1   2   >