Hi Rob,
I also don't think its a pvrinput problem because:
streamdev doesn't query for a new device if the current and the next
channel has the same transponder. This is checked via the following
define:
channels.h:#define ISTRANSPONDER(f1, f2) (abs((f1) - (f2)) < 4) //XXX
All the channels in c
Hi Rob,
> Can we put a check in streamdev to check if it's a pvrinput device and
> recall even if the frequency is the same?
>
if i got it right the pvr devices hasn't to be retuned when switching
the channel, but the externchannelswitch-script has to be executed.
IMO it isn't a good idea to che
vice would be free if THIS connection did turn off
its streams?
Detach();
device = CheckDevice(Channel, Priority, false);
Attach();
2011/6/9 Rainer Blickle :
> Hi Rob,
>
>> Can we put a check in streamdev to check if it's a pvri
Hi,
when running vdr with the epgsearch-1.0.0-plugin, i wasn't able to add
epgdata via the pute-svdrp-command anymore. The svdrp-client seems to
"hang". With version epgsearch-0.9.25.beta17 there wasn't any problem.
I can provide logs if someone tells me how.
Regards, Rainer
___
t; Please start epgsearch with the parameters "-v 2" to generate an
> epgsearch.log file in epgsearchs configuration directory.
>
> cheers,
> Christian
>
> Am 18.10.2011 10:34, schrieb Rainer Blickle:
>>
>> Hi,
>>
>> when running vdr with the epgsear
Hi folks,
i like to re-setup my vdr with ubuntu 12.04. The Plugin pvr350 cannot find
the framebuffer.
I have a device /dev/fb0, but it seems that this is the framebuffer of my
tv-out of my mother board. When booting my old ubuntu 10.10, there are two
framebuffer devices (fb0 and fb1).
can anybody
thx a lot, i have forgotten this module. now the pvr350 is working
2013/7/25 Lars Hanisch
> Hi,
>
> Am 25.07.2013 13:22, schrieb Rainer Blickle:
> > Hi folks,
> >
> > i like to re-setup my vdr with ubuntu 12.04. The Plugin pvr350 cannot
> find the framebuffer.
&g
Hi,
i have the following problem:
With Ubuntu 12.04 inputlirc doesn't work anymore when using the symlics
under /dev/input/by-id/...
I have a Hama IR Remote, the symlinks for the remote are:
/dev/input/by-id/usb-05a4_9881-event-kbd -> ../event2
/dev/input/by-id/usb-05a4_9881-if01-event-mouse -> .
i created a workaround with the following S19... startup script:
#!/bin/sh
cat >/tmp/RecreateLircConfig.java </etc/default/inputlirc
to execute the script, the deb openjdk-7-jdk is needed
2013/7/28 Peter Münster
> On Sat, Jul 27 2013, Rainer Blickle wrote:
>
> > inputlir
Hi Folks,
i have the following setup:
- vdr 1.7.36
- pvr350-device with pvrinput- and pvr350-plugin
- a TechnoTrend (PCI) DVB-C device
- a Sundtek DVB-C USB stick
with this setup i have the following problem:
While watching live tv (of course in transfer mode) everything is ok. When
recording and
Unfortunately neighter i have a second usb root hub on my mainboard nor a
free pci slot for an usb card.
I solved my problem by storing the recordings on a SATA hard disc.
2013/8/12 André Weidemann
> Hi Rainer,
>
>
> On 12.08.2013 16:28, Rainer Blickle wrote:
>
>> Hi Fo
Hi everybody,
i have a question regarding the streamdev plugin. I have 2 tv cards,
both gets accessed with the pvrinput plugin, but the problem i have
would be the same with dvb devices. I also watch TV on the PC with the
two cards.
I have another pc (laptop) with vdr installed. There i installed
ethod.
Regards, Rainer
2010/7/6 Frank Schmirler :
> Hi Rainer,
>
> On Mon, 5 Jul 2010 07:28:37 +0200, Rainer Blickle wrote
>> Later in the code of cServerConnection::GetDevice, if the Method
>> cDevice::GetDevice doesn't return a device, the current receiver gets
>> detac
Hi everybody,
there was the alternate channel patch
(http://www.vdr-wiki.de/wiki/index.php/Alternative_channel-patch).
This patch provides alternative channels for timers, if the programmed
channel was not available. Is there any patch providing this
functionality for live-tv, too ?
If not, i wou
Hi folks,
i have a question regarding testing infrastructure in the vdr project:
Is there any infrastructure for automated tests used by the developer.
The only infrastructure i know of is the remote control. svdrp
commands could be used for automated testing, but i never seen one
using it.
How d
Are the test sources included in the plugin? And if so, how do i execute the
tests?
Am 06.08.2010 02:00 schrieb "Tobi" :
Rainer Blickle wrote:
> How do you (everyone subscribed to this list) test your developed code ?
In the Vodcatcher plugin I used CxxTest:
http://projects.vdr-
Hi Folks,
i have a question: What is the primary device.
I have the following devices:
- xineliboutput or PVR350
- pvrinput-device
None of the devices can do both, receive and showing a stream .
Which of the devices is the primary device. How is the primary device
determined ?
Regards, Rainer
Hi,
in the method cDevice::GetDevice the device with the least impact is
searched (the block with "imp <<= x; imp |= "). For calculating the
impact (higher value = bigger impact) some "facts" are used. The most
prio fact is "prefer the primary device for live viewing", the least
prio is "prefer C
> This impact algorithm has evolved over time and is a very fragile thing.
Looks like only people have very deep insight in this algorithm should
change it.
> For alternate channel, wouldn't it be better to try all possible
> channels one after the other until one succeeds? I would not expect
> Ge
Hi Lars,
> a third one (just comes to my mind, not deeply thought about):
>
> Write a device-plugin which provides a new source. Then you will have your
> own channels. In each channel entry you can configure which "real" channels
> are behind this and the plugin will attach a receiver to the ne
Hi,
i have a question regarding receivers with priority < 0.
I have taken a look at cDvbDevice::ProvidesChannel (1.7.15). When
priority is < 0 hasPriority gets set to true even if there are other
receivers for a different channel. In this case NeedsDetachReceivers
is set to false.
If cDvbDevice:
Hi,
i have a question about a vdr with a ff card.
When watching tv with a ff card (=> not in transfer mode): Is there a
receiver attached to the primary device ?
I cannot test it by myself because i dont have a ff card.
Regards, Rainer
___
vdr mailin
Hi,
i have found the following code snippet in dvbsdffdevice.c:
0x110A, // Fujitsu Siemens DVB-C
0x13C2, // Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu
Siemens DVB-C
0x13C20001, // Technotrend/Hauppauge WinTV DVB-T rev1.X
0x13C20002, // Technotrend/Hauppauge WinTV
> there are enough other solution as "decoder" without tuner
What do you mean with "other" solutions ? I have a pvr350 cards for
output. Do you mean xineliboutput or streamdev or other real hardware
?
___
vdr mailing list
vdr@linuxtv.org
http://www.linux
Has anybody but me applied this patch ?
Rainer
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
y the patch ?
2010/10/14 Rob Davis :
> On 14/10/10 02:27, Rainer Blickle wrote:
>>
>> Has anybody but me applied this patch ?
>>
>> Rainer
>
> The patch seems spread across vdr and skincurses, which I don't use, so it
> didn't apply.
>
> Am
Hi,
i have a Technotrend DVB-C 1501 device (I guess the chip is the
saa7146). With this card i cannot view a recording or live tv with the
xineliboutput. live tv or a recording done by a pvrinput device works
fine.
Does anyone has a clue why the dvb-c device doesn't work with xineliboutput ?
I h
Hi,
after searching a while i found it.
With vdr-version 1.7.8 the cvs version of xineliboutput has to be used.
Now everything works fine.
2010/10/15 Rainer Blickle :
> Hi,
>
> i have a Technotrend DVB-C 1501 device (I guess the chip is the
> saa7146). With this card i cannot view
Hi,
perhaps the pid's have changed. Pls do a rescan (with wscan or so) and
compare the newly generated channels.conf with your entry.
2010/10/22 Dirk E. Wagner :
> Hi,
>
> On 18.10.2010 12:00, vdr-requ...@linuxtv.org wrote:
>>
>> I have a strange problem with a relatively new DVB-T/SD/MPEG2 cha
Hi Dirk,
if you have a solution, pls reply the answer to your question. You
have written your solution in the vdr portal.
For the others: The pids of the channel have changed. After creating a
new channels.conf the channel can be received.
2010/10/25 Rainer Blickle :
> Hi,
>
> pe
I have/had this problem when starting vdr not in the directory where
the binary is. I used the parameter --localedir=..., but it didn't
work. The default value for the locale dir is ./locale.
At the moment i am changing to the directory where the vdr binary is
located and start it there.
2010/11/
Hi Lars,
from my point of view this is not a problem and no fault of gcc 4.4.3.
Why ?: When selecting a device for receiving (cDevice::GetDevice as
far i know) there are 3 bits for the count of modulation systems. Is
is the impact variable.
The method isn't used anywhere else.
The impact is sma
I've tried the patch and it worked at the first glance. But with the
plugin Extrecmenu there are problems with the color keys. So i rolled
back the patch.
2010/10/19 VDR User :
> On Tue, Oct 19, 2010 at 12:16 AM, Oliver Schinagl wrote:
>> Nobody has any comment at all? :)
>>
>> I haven't found an
ional 'skin' and thus the plugin
> would have to be ported aswel.
>
> On 03/29/11 10:00, Rainer Blickle wrote:
>> I've tried the patch and it worked at the first glance. But with the
>> plugin Extrecmenu there are problems with the color keys. So i rolled
>> b
When pressing the correct color buttons while learning, everything is
ok. But i don't want this because then jumping +/- 1 minute while
watching a recording are not on the middle color keys.
All i would like to have is that only the color on the on-screen
buttons changes.
2011/3/29 Rainer Bli
2011/3/30 Steffen Barszus :
> 2011/3/30 Oliver Schinagl :
>> I belive that is exactly only what this patch does, it changes the
>> positions on the screen for the ST-NG theme I think (it's been a while I
>> admit).
>>
>> So if VDR is told that the red button performs the job of the red
>> button, t
Yes i do. But the request can be refused, of course. Why not asking.
I have a hama MCE ir. Dont know how many people use this remote.
2011/4/1 fnu :
>> My remote has the color order Yellow, Red, Blue, Green (only an example, i
> dont have the remote at hand). Lets say the buttons are Button0, But
37 matches
Mail list logo