Tried that. Can't recover the PW to log in.
-Original Message-
From: Neil Zampella [mailto:ne...@techie.com]
Sent: Friday, February 5, 2021 11:38 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] (no subject)
That's not going to work, you have to go to the URL shown
That's not going to work, you have to go to the URL shown at the bottom
of each message.
Neil, KN3ILZ
On 2/5/2021 11:30 AM, John Zantek wrote:
unsub
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
*To:* WSJT software development
*Subject:* Re: [wsjt-devel] (no subject)
Hi,
Thanks for the quick response. I just tried HandShake = NONE
and I have the same result - Rig Failure - HamLib Error.
Any other suggestions?
Thanks!
Bill - AK6A
On Sat, May 23,
.x ? The 101MP is unfortunately persnickety in
that regard.
No hubs, right?
73 John W7CD
From: Bill [mailto:brightl...@gmail.com]
Sent: Saturday, May 23, 2020 3:59 PM
To: WSJT software development
Subject: Re: [wsjt-devel] (no subject)
Hi,
Thanks for the quick response. I
ght?
>
> 73 John W7CD
>
>
>
> *From:* Bill [mailto:brightl...@gmail.com ]
> *Sent:* Saturday, May 23, 2020 3:59 PM
> *To:* WSJT software development
> *Subject:* Re: [wsjt-devel] (no subject)
>
>
>
> Hi,
>
>
>
> Thanks for the quick res
to talk to the rig with any other S/W via USB and with
> what virtual settings?
>
> Is the PC using USB 2.0 or 3.x ? The 101MP is unfortunately persnickety
> in that regard.
>
> No hubs, right?
>
> 73 John W7CD
>
>
>
> *From:* Bill [mailto:brightl...@gmail.com ]
&g
?
Is the PC using USB 2.0 or 3.x ? The 101MP is unfortunately persnickety in
that regard.
No hubs, right?
73 John W7CD
From: Bill [mailto:brightl...@gmail.com]
Sent: Saturday, May 23, 2020 3:59 PM
To: WSJT software development
Subject: Re: [wsjt-devel] (no subject)
Hi,
Thanks
o:brightl...@gmail.com]
*Sent:* Saturday, May 23, 2020 3:59 PM
*To:* WSJT software development
*Subject:* Re: [wsjt-devel] (no subject)
Hi,
Thanks for the quick response. I just tried HandShake = NONE and
I have the same result - Rig Failure - HamLib Error.
Any other suggestions?
Thanks!
Bi
gt; 73 John W7CD
>
> From: Bill [mailto:brightl...@gmail.com]
> Sent: Saturday, May 23, 2020 3:59 PM
> To: WSJT software development
> Subject: Re: [wsjt-devel] (no subject)
>
> Hi,
>
> Thanks for the quick response. I just tried HandShake = NONE and I have
> the same resu
what virtual settings?
>
> Is the PC using USB 2.0 or 3.x ? The 101MP is unfortunately persnickety
> in that regard.
>
> No hubs, right?
>
> 73 John W7CD
>
>
>
> *From:* Bill [mailto:brightl...@gmail.com]
> *Sent:* Saturday, May 23, 2020 3:59 PM
> *To:* WSJT so
in
that regard.
No hubs, right?
73 John W7CD
From: Bill [mailto:brightl...@gmail.com]
Sent: Saturday, May 23, 2020 3:59 PM
To: WSJT software development
Subject: Re: [wsjt-devel] (no subject)
Hi,
Thanks for the quick response. I just tried HandShake = NONE and I have the
same result
Using /dev/cu.SLAB_USBtoUART the handshake is set to NONE
When I tried the Handshake = Hardware I received the same error.
Thanks for helping me with this. I know you are very busy with the RC.
Since the FTDX101MP is a new radio there doesn't seem to be much info out
there.
- Bill
On Sat, May
On 24/05/2020 00:18, Bill wrote:
When using /dev/cu.SLAB_USBtoUART The error details shows: HamLib
Error: Communication timed out while getting current frequency.
Hi Bill,
was that with "Settings->Radio->Handshake->Hardware" or
"Settings->Radio->Handshake->None"?
73
Bill
G4WJS.
Hi Bill,
When using /dev/cu.SLAB_USBtoUART1 The error details shows: HamLib Error:
Invalid configuration while opening connection to rig.
When using /dev/cu.SLAB_USBtoUART The error details shows: HamLib Error:
Communication timed out while getting current frequency.
Both selections end up
On 23/05/2020 23:59, Bill wrote:
Hi,
Thanks for the quick response. I just tried HandShake = NONE and I
have the same result - Rig Failure - HamLib Error.
Any other suggestions?
Thanks!
Bill - AK6A
Hi Bill,
please include the message shown by pressing the "Show Details ..."
Hi,
Thanks for the quick response. I just tried HandShake = NONE and I
have the same result - Rig Failure - HamLib Error.
Any other suggestions?
Thanks!
Bill - AK6A
On Sat, May 23, 2020 at 3:32 PM Bill Somerville
wrote:
> On 23/05/2020 23:16, Bill wrote:
>
> I am having an issue
On 23/05/2020 23:16, Bill wrote:
I am having an issue connecting a Yaesu FTDX-101MP to WSJT-X on a Mac.
I’m able to get the receive Audio Codec to work properly and I can see
decodes but I get a “Rig Failure - Hamlib Error - Invalid
configuration while opening connection to rig” whenever I
BTW, Sorry to everyone for posting this message with no subject line. I'm
not sure how to fix it. I'm sure everyone is getting spam alerts on this
post like I am.
On Sat, Mar 2, 2019 at 8:34 AM Bill wrote:
> Hi Larry,
>
> That is possible. It's hard to know what he is actually seeing on his
Hi Larry,
That is possible. It's hard to know what he is actually seeing on his
side. I do know that he is usually very strong here in Oregon and my
reports back are usually in the +05 range so I should have enough signal
there to power through some QRM. It would be nice though if people
They came back to me with a signal report three times, but then someone else in
FN42 jumped on top of my frequency with more power and the Q never could
complete. This may be what is happening to you. Lots of hams calling, and not
necessarily looking for an open frequency.
73 -- Larry --
On 17/12/2018 12:12, Unni Tharakkal wrote:
120815 -19 0.4 1739 ~ _<...>_ TA5/ON6ZG RRR
What is the meaning of the highlighted text and acallsign iside the <>
Unni
VU2TE
Hi Unni,
you will find the answer here in the WSJT-X User Guide:
Unfortunately no, it's an export software encryption issue
On Thu, Nov 29, 2018, 8:48 PM Gary McDuffie
>
> > On Nov 29, 2018, at 14:45, Bill Somerville
> wrote:
> >
> > that install location is fine. Later on in the installer you will be
> prompted if you want to install the libraries into
Steve,
you didn't give what Windows version you're using.
I loaded it on Win8.1 with the defaults, and had no issues. Evidently
the installer adds a system path variable or the like, as I didn't
change the default install location and it works fine.
Neil, KN3ILZ
On 11/29/2018 4:36 PM,
On 29/11/2018 21:36, Steve Sacco wrote:
After downloading the exe, I attempted to install, and notice that it
is not defaulting to "the Windows system directory":
Hi Steve,
that install location is fine. Later on in the installer you will be
prompted if you want to install the libraries into
John and all who are discussing the contest dupe issue. Here is my solution
which I think is great.
I run my logging program on the screen all the time. When a contact is logged
in WSJT-X, it automatically gets sent to my log and shows up on the screen.
(Then it is easy for me to make any
Can someone please block this user? This is the 5th blank note from this
person.
> On Sep 25, 2018, at 6:25 AM, Анатолий wrote:
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
>
Please stop sending empty messages to the dev list.
> On Sep 23, 2018, at 11:15 AM, Анатолий wrote:
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Hi Franco,
I'm not sure I understand what the question is. build-wsjtx rinstall
simply builds the development branch for testing.
For additional build options, in JTSDK-QT, use: help-wsjtx
73's
Greg, KI7MT
On 7/5/2016 15:17, bag...@libero.it wrote:
> Goodmorning everyone
>
>
>
On 12/04/2014 07:33, Claude Frantz wrote:
Hi Claude,
On 04/11/2014 07:40 PM, Greg Beam wrote:
Hamlib 3 is not part of my current Linux distribution. I have compiled
and installed it separately.
There some changes that are newer even than the Hamlib 3 main
repository, currently they are in my
Hi Bill,
Ok got it.
I'm using a native install of 14.04 so the VM issue not a problem. I'm
also using /proc/cpuinfo to get the core count so should be ok.
73's
Greg, KI7MT
On 04/12/2014 12:44 PM, Bill Somerville wrote:
On 12/04/2014 19:36, Greg Beam wrote:
HI Bill,
Hi Greg,
Thanks. I'm
30 matches
Mail list logo