Yes, it displays 'O' and '1' and the numbers of the two channels I am flipping between. They are displayed on the screen of each channel selectively. So this means that both cc's are good and working as they should?.
Is there any reason then when I use the Guide button to bring up a digital channel I get a blank screen, but if I use the 'Change Page' button to change the channel from another , it works? Last night I set up two channels to Record and after a short while one of them stopped. Later I tried again and they BOTH recorded. I'm afraid to be too optimistic, but the Tech said he was going to do something remotely when he got back to the Shop so possibly he tweaked something with the Cards and it worked. I'm going to try the dual recording again and see what happens. Let you know..... Sanr If, and only if, both tuners are tuned to a channel that requires CableCARDs are you ALSO flipping between the cards. If you enter Select-Play-Select-Instant Replay-Select you should see an info overlay on screen which tells you which tuner and card is in use (CC0 or CC1). Enter it again to turn off the display. -MZ
