Would it be the same if I glue together side-by-side nine squared magnets but reversing the one at the center?

    Mark Jordan

On 22-Feb-17 17:40, Brian Ahern wrote:

Imagine placing 4 - 50 cent coins at each corner. Then place one in the center.

Starting with an annealed billet one can impress these fields with a cylinder of NdFeB magnet. You just reverse the polarity for the center.

This process is called 'conditioning'. That is the condition for the billet that worked for two years.

Another salient feature. The Manelas device was powering batteries for his house. He had 48 lithium ion batteries accepting pulses from his unit. On a Sunday morning in April 2012 he called me to say his battery pack spontaneously over charged and several of the batteries 'pillowed'.

It happend between midnight and 6 AM. I visited him that day and confirmed that all the batteries were overcharged.

I observed the same charging effect in July 2014 with the Manelas system.in my home lab.

*From:* Bob Higgins <rj.bob.higg...@gmail.com>
*Sent:* Wednesday, February 22, 2017 3:22 PM
*To:* vortex-l@eskimo.com
*Subject:* Re: [Vo]:DESCRIBING THE MANELAS Phenomenon

You previously said that the strontium ferrite block was 4" x 6" x 1". Can you explain how the 3 coils are wound to produce a "north pole" at each of the 4 corners with a common center south pole in the center? Are 2 of the coils wrapped around the block like wrapping a box with ribbon in a plus? Then is the third coil wrapped around the 1" wide circumference?

A diagram would be great.


On Wed, Feb 22, 2017 at 1:08 PM, Brian Ahern <ahern_br...@msn.com <mailto:ahern_br...@msn.com>> wrote:

    I have the original billet and all three axises are wound with the
    suggested length of wire (170 feet).

    I welcome any suggestions and directions.

    I am not skilled with AC circuits, but I have significant
    experience with high voltage pulsed systems.

    I will take it to my grave that the Manelas system worked and that
    we were not fooled. I just do not know how to proceed

Reply via email to