I just replaced my cpu fan.
It was not difficult.
All I used was a philips screwdriver
I had to buy 4 new screws from the hardware store as the new fan was
thicker than the one that was in there.
I got the fan at coolerguys.com.
The shipping was more than the fan..
My fan was just screwed to the spaces between the heat sink.
You need to be sure you get the same elec. connection as the old one.
Mine was a 3 pin.
Good luck.
Sam
Leslie S. Gottlieb wrote:
My 4 year old Dell Dimension comes up with a CPU0 Fan error - I don't
hear a fan whirring actually.
Where is the best place to get one - eBay?
Is it hard to replace - I'm fairly handy installing hardware.
Leslie Gottlieb
--
----------------------------------------
To Change your email Address for this list, send the following message:
CHANGE WIN-HOME your_old_address your_new_address
to: [EMAIL PROTECTED]
Note carefully that both old and new addresses are required.
--
----------------------------------------
To Change your email Address for this list, send the following message:
CHANGE WIN-HOME your_old_address your_new_address
to: [EMAIL PROTECTED]
Note carefully that both old and new addresses are required.
