-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 26/07/2015 17:12, maderios a écrit :
Le 26/07/2015 14:34, François Patte a écrit :
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1
Le 26/07/2015 13:39, maderios a écrit :
Le 26/07/2015 13:05, François Patte a écrit :
Quel moyen de vérification
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hello,
My laptop network setup works like the following:
I have a build in wlan- (wlan0) and ethernetcard (eth0), and just want
to use wlan0 managed by NetworkManger, so I have stated a minimal eth0
config in /etc/network/interfaces
# cat
On 2015-07-27 07:51:28 +0200, Sylvain L. Sauvage wrote:
Le dimanche 26 juillet 2015, 21:22:35 Vincent Lefevre a écrit :
On 2015-07-26 20:39:52 +0200, Sylvain L. Sauvage wrote:
Ben, quand tu réveilles ta machine après 10h de dodo, t’as
plutôt envie qu’elle soit à l’heure rapidement…
On Sun, 26 Jul 2015 20:28:21 +0100, Brian wrote:
Your problem (please correct me if I have not understood what you said)
is that applications, Iceweasel, Evince etc, still see HP_LaserJet_1020
after the server is closed down.
No, I meant: the server usually stays on until I go to bed, but
this is a easy problem between the keyboard and chair xD
2015-07-27 7:19 GMT-04:30 Lisi Reisz lisi.re...@gmail.com:
On Monday 27 July 2015 03:46:31 David Bruce wrote:
I would still welcome any suggestions or insights as to why the 6.03
installer works with my home router, but 8.1 does not.
Salut,
maderios a écrit le 26/07/2015 17:20 :
Ton post est imprécis. Quelle Debian, quelle imprimante, quel driver? En
tous cas, la version de cups que tu mentionnes, 1.5.3-5, est de loin
obsolète par rapport à celle de Jessie qui est la 1.7.5-11.
D'après :
On Monday 27 July 2015 03:46:31 David Bruce wrote:
I would still welcome any suggestions or insights as to why the 6.03
installer works with my home router, but 8.1 does not.
In one word, drivers.
Also, have you checksum checked the net install with firmware disk?
Another suggestion, install
El Sun, 26 Jul 2015 23:26:16 +0200, Oscar Mosquera Ramos escribió:
(ese html...)
Usaba Debian 7 con la última actualización.
He comprobado que Debian se ha actualizado a la versión 8.1 He
actualizado debian mediante apt-get dist-upgrade editando de antemano
los repositorios.
Cuando la
Le 27/07/15 à 14:15, maderios mader...@gmail.com a écrit :
M Pas claire cette histoire... Tu ne parlais pas de Cups, il fallait le
M dire plus tôt...
Euh, là t'abuses ;-)
Son 1er post contenait version cups: 1.5.3-5+deb7u5 avec un sujet cups bat
la campagne
M La liveboxe orange est une
I suggest you join the alpine discussion list. The
current developer pretty much lives there, and there
is a nice group of subscribers. They talk about this
kind of question all the time.
https://mailman13.u.washington.edu/mailman/listinfo/alpine-info
--
I am not a loony. Why should I be
Sorry about firing the blank there.
On Mon, Jul 27, 2015 at 4:53 AM, Stephen Powell zlinux...@wowway.com wrote:
[...]
Thanks to all who participated in this thread. If anyone has
a clue how to fix this without purging the package, I'll try
reinstalling it.
I also sometimes get applications
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 26/07/2015 00:28, Bernard Schoenacker a écrit :
Le Sat, 25 Jul 2015 19:33:02 +0200, François Patte
francois.pa...@mi.parisdescartes.fr a écrit :
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1
Bonjour,
J'ai une foule de problème avec
Le 27/07/2015 13:04, François Patte a écrit :
Le problème est résolu: l'imprimante était branchée sur le port usb
d'une box sagem d'orange et c'est le serveur d'impression de
celle-ci qui met la pastouille depuis la mise à jour de ladite box par
orange...
Pas claire cette histoire... Tu ne
Am Montag, 27. Juli 2015, 08:13:29 schrieb john vera:
In one word, drivers.
Hi there,
some hardware is not recognized by the insdtallation kernel. I suggest, to
install a minimal systerm from the DVD, then download and install the newest
linux-image-* with another computer and install it
On Monday 27 July 2015 15:17:50 Thomas Schmitt wrote:
Hi,
i wrote:
btrace(8) (resp. blktrace(8)) seems to be the better
Chris Bannister wrote:
Excuse my ignorance, but I was wondering what 'resp.' means here.
btrace lets blktrace do the work and blkparse tell the user.
man 8 btrace:
Hi,
i wrote:
btrace(8) (resp. blktrace(8)) seems to be the better
Chris Bannister wrote:
Excuse my ignorance, but I was wondering what 'resp.' means here.
[i missed the point]
Lisi Reisz wrote:
But what does resp. mean?
I guess there is something wrong with my use of respectively.
On 2015-07-27, Renaud OLGIATI ren...@olgiati-in-paraguay.org wrote:
On Mon, 27 Jul 2015 15:48:21 +0100
Lisi Reisz lisi.re...@gmail.com wrote:
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine control,
and
Hi,
i wrote:
btrace(8) (resp. blktrace(8)) seems to be the better
Chris Bannister wrote:
Excuse my ignorance, but I was wondering what 'resp.' means here.
btrace lets blktrace do the work and blkparse tell the user.
man 8 btrace:
The btrace script provides a quick and easy way to do live
Monday 27 July 2015 15:32:27 Cyrille wrote:
J'aurais besoin d'un conseil avant achat.
J'avais un portable LDLC AURORE BB5 i3 4 H5 :
Quelle est sa vraie marque, car LDLC ne semble pas en être une.
Sans doute un PC générique de basse qualité, made in RPC,
où tout le monde peu y apposer sa
Le 27/07/2015 17:58, André a écrit :
$ libreoffice
/usr/lib/libreoffice/program/soffice.bin: error while loading shared
libraries: libavahi-common.so.3: cannot open shared object file:
No such file or directory
La librairie libavahi-common.so.3 ne peut s'installer :
# apt-get install
Le 27/07/2015 15:32, Cyrille a écrit :
Bonjour
J'aurais besoin d'un conseil avant achat.
J'avais un portable LDLC AURORE BB5 i3 4 H5 : c'était un i3 avec 4 go de RAM
DDR 3 2.5 Ghz et un disque SATA de 500 G (année 2012)
Il a rendu l'âme, :-(
J'en cherche un dans les mêmes prix (moins de 500
Hi,
Where do I find the latest Wheezy installer now that Jessie has gone stable?
Thanks.
Hugo
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On Mon, Jul 27, 2015 at 10:39:35AM -0500, Hugo Vanwoerkom wrote:
Hi,
Where do I find the latest Wheezy installer now that Jessie has gone stable?
https://www.debian.org/releases/wheezy/debian-installer/ but read the
warnings on that page before use.
Thanks.
Hugo
--
To UNSUBSCRIBE,
Quoting Renaud OLGIATI (ren...@olgiati-in-paraguay.org):
On Mon, 27 Jul 2015 15:48:21 +0100
Lisi Reisz lisi.re...@gmail.com wrote:
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine control,
and while I
On Mon, Jul 27, 2015 at 04:49:32PM +0200, AOMSL Samy wrote:
J'ai eu un Thinkpad T410 avec un I7 M620 à 2.67GHz pour 400 € et un
Thinkpad R400 avec un Core2Duo P8400 à 2.26GHz pour 200 €. Et je ne
suis pas déçu des produits (faut aimer le matos d'occasion avec les
rayures éventuelles, les
Hola listeros. Tengo instalado Debian 8.1 Cinnamon, que por cierto, lo
veo muy completo como entorno. Sucede que en dos ocasiones trabajando en
el mismo, cuando menos lo esperaba, se me congela todo. Solo el cursor
funciona, nada más. Después de esperar un tiempito, pensando que es
algún
On Mon, Jul 27, 2015 at 09:58:58AM -0400, Gene Heskett wrote:
Greetings all;
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine control,
and while I finally did get networking up and running, I was amazed to
$ libreoffice
/usr/lib/libreoffice/program/soffice.bin: error while loading shared
libraries: libavahi-common.so.3: cannot open shared object file:
No such file or directory
La librairie libavahi-common.so.3 ne peut s'installer :
# apt-get install libavahi-common.so.3
E: Impossible de trouver
Greetings all;
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine control,
and while I finally did get networking up and running, I was amazed to
find that udev would create an eth0 on finding an 8139too on the
El Mon, 27 Jul 2015 10:18:17 -0400, Centro Provincial de Patrimonio
escribió:
Hola listeros. Tengo instalado Debian 8.1 Cinnamon, que por cierto, lo
veo muy completo como entorno. Sucede que en dos ocasiones trabajando en
el mismo, cuando menos lo esperaba, se me congela todo. Solo el cursor
Un ordinateur de 2012 qui rend déjà l'âme, c'est limite scandaleux.
pas franchement de leur faute, ma fille l'a fait tombé. Ce n'est pas le matos
qui est en cause ;-)
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez
On 2015-07-27, Lisi Reisz lisi.re...@gmail.com wrote:
On Monday 27 July 2015 14:58:58 Gene Heskett wrote:
Greetings all;
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine control,
and while I finally did get
27.07.2015, 17:39 CEST Hugo Vanwoerkom:
Where do I find the latest Wheezy installer now that Jessie has gone stable?
Thanks.
If you're looking for install media, here:
http://cdimage.debian.org/mirror/cdimage/archive/
--
Regards
mks
--
To UNSUBSCRIBE, email to
Obrigado pessoal!
Vou ler este material todo e depois posto os resultados!
mais uma vez, obrigado pela ajuda de vocês!
Em 26-07-2015 14:00, Bruno Lessa escreveu:
Boa tarde.
Presumindo que você utilize squid, você poderá setar o gateway da rede
lan direto no proxy por meio do parâmetro
Le 27/07/2015 15:49, Daniel Caillibaud a écrit :
Le 27/07/15 à 14:15, maderios mader...@gmail.com a écrit :
M Pas claire cette histoire... Tu ne parlais pas de Cups, il fallait le
M dire plus tôt...
Euh, là t'abuses ;-)
Pas vraiment. Merci de citer le message auquel je répondais et qui était:
Bonjour,
Le 27/07/2015 15:32, Cyrille a écrit :
J'avais un portable LDLC AURORE BB5 i3 4 H5 : c'était un i3 avec 4 go de RAM
DDR 3 2.5 Ghz et un disque SATA de 500 G (année 2012)
Il a rendu l'âme, :-(
Un ordinateur de 2012 qui rend déjà l'âme, c'est limite scandaleux.
J'en cherche un dans
On Monday 27 July 2015 14:58:58 Gene Heskett wrote:
Greetings all;
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine control,
and while I finally did get networking up and running, I was amazed to
find that
Quoting Thomas Schmitt (scdbac...@gmx.net):
Hi,
i wrote:
I get a connection to the SMTP server directly by this line
in ~/.pinerc:
smtp-server=mail.gmx.net/ssl/user=my_user...@gmx.net
David Wright wrote:
I assume that you're telling me that this does not work, right?
Yes. It
On Mon, 27 Jul 2015 15:48:21 +0100
Lisi Reisz lisi.re...@gmail.com wrote:
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine control,
and while I finally did get networking up and running, I was amazed to
Le 27/07/2015 19:01, Cyrille a écrit :
Je revends du Dell et n'ai jamais eu de soucis pour y installer Linux.
Un des derniers portables Dell que j'ai livré sous Ubuntu
Vostro 3546/i3-4005U 4G 500G 15.6
Aurais tu un site pour voir ce que tu proposes au niveau config / tarif ?
Le site de Dell
As tu vu le Dell Ubuntu Serie 3000 à 249 EUR ?
Oui mais c'est un celeron, je préférerai un i3 :-(
ou à défaut un Pentium N3530
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
On Mon 27 Jul 2015 at 14:17:52 +0200, Tuxo Holic wrote:
On Sun, 26 Jul 2015 20:28:21 +0100, Brian wrote:
Your problem (please correct me if I have not understood what you said)
is that applications, Iceweasel, Evince etc, still see HP_LaserJet_1020
after the server is closed down.
salut la liste ;)
Je ne me suis jamais senti très à l'aise entre utf8 et iso-machin. Mais
cette fois, je souhaite basculer complètement vers utf8.
Et je ne m'explique pas ceci:
Je créé un fichier utf8 avec kate sur une machine de dev qui contient
des accents et que je déplace sur le
Salut,
Ce qui me choque c'est que ton premier PC LDLC a rendu l'âme au bout de
trois ans et que tu retournes sur le même type de config avec le même
fournisseur et de même marque...
Mon conseil : essaye autre chose.
Cdt
Grégory Reinbold
UNIX - Where there is a shell, there is a way.
On
Le 27/07/2015 17:23, Cyrille a écrit :
Salut et merci pour vos réponses
Pour 500€, il existe bien d'autres choix.
Tu penses à quoi ?
Regarde du coté de asus, le rapport qualité prix est correct.
(surtout pas avec Optimus, c'est mal supporté)
Je ne connais pas :-(
C'est une technologie
sur mon asus R510CC ma carte wifi d'après asus n'est pas supportée par
linux mais sa marche quand même des l'instillation à part un petit bug
mais résolu en 2 secondes
pour ce qui est d'optimus
http://www.nvidia.fr/object/optimus_technology_fr.html
effectivement je m'en sert sous ubuntu sa
Le 27/07/2015 18:53, Daniel Huhardeaux a écrit :
Bonjour
Le 27/07/2015 18:13, Cyrille a écrit :
Quelle est sa vraie marque, car LDLC ne semble pas en être une.
C'est une base clevo
http://www.clevo.fr/
Dell est recommandé pour ceux qui voyagent beaucoup car solide.
je reviens du site
Ce qui me choque c'est que ton premier PC LDLC a rendu l'âme au bout de
trois ans et que tu retournes sur le même type de config avec le même
fournisseur et de même marque...
Oui mais s'il est mort c'est que ma fille l'a fait tomber par terre ! J'ai
plusieurs machine LDLC au travail ou à la
Le lundi 27 juillet 2015, 18:43:47 Fabrice Regnier a écrit :
salut la liste ;)
’soir,
[…]
En console, sur le serveur, je ne vois pas apparaître les
accents
Par « console », tu entends bien un tty, hein, pas une
connexion ssh ou autre ?
fabricer@ns330829:~/infocentre$ head util.php
?php
On 27 July 2015 at 18:27, Mark Allums m...@allums.xyz wrote:
On 07/27/2015 08:46 AM, Hans wrote:
Am Montag, 27. Juli 2015, 08:13:29 schrieb john vera:
In one word, drivers.
Don't we mean: firmware. Nonfree firmware was removed from Debian main
for some silly reason. A lot of hardware
Salut et merci pour vos réponses
Pour 500€, il existe bien d'autres choix.
Tu penses à quoi ?
(surtout pas avec Optimus, c'est mal supporté)
Je ne connais pas :-(
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez
Je revends du Dell et n'ai jamais eu de soucis pour y installer Linux.
Un des derniers portables Dell que j'ai livré sous Ubuntu
Vostro 3546/i3-4005U 4G 500G 15.6
Aurais tu un site pour voir ce que tu proposes au niveau config / tarif ?
--
Lisez la FAQ de la liste avant de poser une question :
On Mon, 27 Jul 2015, Gene Heskett wrote:
I am in the process of building up an old MSI K8M890M2-V motherboard,
with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc machine
control, and while I finally did get networking up and running, I was
amazed to find that udev would create an eth0 on
Boa tarde pessoal.
Alguém já usou Vtun (http://vtun.sourceforge.net) ?
É melhor que Openvpn?..Quanto a questões como Segurança, Estabilidade,
Velocidade ???
Só achei meio estranho, pois parece que a última atualização do projeto
foi em 2012
Quem tem experiência com isso, poderia me
Le 27 juil. 2015 à 17:23, Cyrille cyri...@cbiot.fr a écrit :
Salut et merci pour vos réponses
Bonjour,
Pour 500€, il existe bien d'autres choix.
Tu penses à quoi ?
C’est clair, 500€ ça fait déjà une belle petite somme.
Je m’orienterai sans hésiter sur du Dell gamme pro (Latitude E6420 ou
Hi,
David Wright wrote:
I can direct alpine unencrypted to port 30029 and see the same
effect as with alpine's own encryption via /ssl/ or /tls/.
I'm sorry if I appear to be thick but I get very little sense from
see the same effect as with alpine's own encryption. I can't be
certain
Cordialement,
Christophe De Natale
Le 27 juil. 2015 à 19:24, Cyrille cyri...@cbiot.fr a écrit :
Le seul hic, c'est que dans mon budget le chipset est Pentium N3530, je ne
connais pas, j'aurais préféré un I3, sauf ci on me dit que c'est bien aussi
comme puce
Il existe déjà 4
Hi,
Bob Bernstein wrote:
I suggest you join the alpine discussion list.
https://mailman13.u.washington.edu/mailman/listinfo/alpine-info
Will ask there after i managed to get version 2.20 running
from source tarball. (Or after i encountered a showstopper.)
Have a nice day :)
Thomas
--
To
Quoting Thomas Schmitt (scdbac...@gmx.net):
David Wright wrote:
I can direct alpine unencrypted to port 30029 and see the same
effect as with alpine's own encryption via /ssl/ or /tls/.
I'm sorry if I appear to be thick but I get very little sense from
see the same effect as with
Le 27/07/2015 18:53, Daniel Huhardeaux a écrit :
Je revends du Dell et n'ai jamais eu de soucis pour y installer Linux.
Voici donc un bel exemple de conflit d'intérêt sur une liste Debian :-(
Par ailleurs, les matériels obsolètes ou en voie d'obsolescence sont en
général bien supportés.
--
I understand the desire to put free software first and segregate out
packages that don't meet the standard, but if a free driver is not
available for one's hardware, then I figure the least Debian could do is
to offer to install a non-free one (purists should be free to change
the config to
Bonsoir,
je suis la discution avec interet car je cherche moi meme un portable.
que pensez vous de ca
http://www.cdiscount.com/informatique/ordinateurs-pc-portables/lenovo-thinkpad-t520-i5-4gb-ram-160go/f-1070992-len0885976979648.html?idOffre=56947135#mpos=12|mp
On Mon, 27 Jul 2015 12:30:20 -0600
Glenn English g...@slsware.net wrote:
Guys, this is not tough. Just put non-free in your apt sources file
line(s), and you'll never see the difference. The firmware in not
unencumbered; it's $free, but not beer free. You can get it any time you ask
for
veamos, danos mas detalles,
*targeta de video,
*kernel
*cuantos bits
--
**
software libre no significa gratis: richard m. stallman
http://wiki.debian.org/es/NormasLista#resumen
http://wiki.debian.org/es/NormasLista/Gmail
On Monday 27 July 2015 10:48:21 Lisi Reisz wrote:
On Monday 27 July 2015 14:58:58 Gene Heskett wrote:
Greetings all;
I am in the process of building up an old MSI K8M890M2-V
motherboard, with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc
machine control, and while I finally did get
On Monday 27 July 2015 11:33:11 Chris Bannister wrote:
On Mon, Jul 27, 2015 at 09:58:58AM -0400, Gene Heskett wrote:
Greetings all;
I am in the process of building up an old MSI K8M890M2-V
motherboard, with an Athlon 64X2 at 3.8Ghz on it, to be used for cnc
machine control, and while I
Hi,
OK. It would be nice to know which port numbers alpine is trying to
use.
It did connect with explicitely setting port 587 for /tls/.
But i bet that neither port nor encryption protocol is the
problem. If not alpine mimicks a SMTP error 503 then the
connection is good enough to transmit
Le nonidi 9 thermidor, an CCXXIII, David Wright a écrit :
OK. It would be nice to know which port numbers alpine is trying to
use.
strace can tell you that and much more, especially if the encryption is done
by a separate program.
Regards,
--
Nicolas George
signature.asc
Description:
On 2015-07-27, John L. Ries jr...@salford-systems.com wrote:
Ideals are good, but one still has to deal with reality.
You can find some reality here:
http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/
--
To UNSUBSCRIBE, email to
On Jul 27, 2015, at 11:49 AM, Michael Fothergill
michael.fotherg...@googlemail.com wrote:
On 27 July 2015 at 18:27, Mark Allums m...@allums.xyz wrote:
On 07/27/2015 08:46 AM, Hans wrote:
Am Montag, 27. Juli 2015, 08:13:29 schrieb john vera:
In one word, drivers.
Don't we mean:
Quoting Thomas Schmitt (scdbac...@gmx.net):
Were I a user of mail.gmx.net, I would ask them.
Futile. They'd want me to use the web interface with lots
of advertising.
Oh dear. Well, could you attack the problem the other way round and
connect alpine to exim, say, on your own machine.
Bonjour,
Le 27/07/2015 20:46, maderios a écrit :
Le 27/07/2015 18:53, Daniel Huhardeaux a écrit :
Je revends du Dell et n'ai jamais eu de soucis pour y installer Linux.
Voici donc un bel exemple de conflit d'intérêt sur une liste Debian :-(
A mon sens non puisque Daniel ne propose pas de
On Monday 27 July 2015 18:06:45 Daniel Huhardeaux wrote:
Le 27/07/2015 17:58, André a écrit :
$ libreoffice
/usr/lib/libreoffice/program/soffice.bin: error while loading shared
libraries: libavahi-common.so.3: cannot open shared object file:
No such file or directory
La librairie
j'aurais pris celui ci
http://www.cdiscount.com/informatique/ordinateurs-pc-portables/lenovo-thinkpad-t520-i5-4gb-ram-160go/f-1070992-len0885976979648.html?idOffre=56947135#mpos=12|mp
Le 27/07/2015 20:44, Thierry Granier a écrit :
Bonsoir,
je suis la discution avec interet car je cherche moi
On Mon, 27 Jul 2015 15:57:45 + (UTC)
Liam O'Toole liam.p.oto...@gmail.com wrote:
Is there a way to make udev forget the names it has assigned ?
Yes. Just delete the file /etc/udev/rules.d/70-persistent-net and
reboot.
And while on this subject, can udev be made to forget all the
On Monday 27 July 2015 11:56:19 Liam O'Toole wrote:
On 2015-07-27, Lisi Reisz lisi.re...@gmail.com wrote:
On Monday 27 July 2015 14:58:58 Gene Heskett wrote:
Greetings all;
I am in the process of building up an old MSI K8M890M2-V
motherboard, with an Athlon 64X2 at 3.8Ghz on it, to be
Is there a time line for releasing a Let's Encrypt ( letsencrypt) package
for Debian? Will it be backported to Debian stable?
I did note discussion of that here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=774387
It is available at github:
https://github.com/letsencrypt/letsencrypt
On 7/27/2015 2:30 PM, Glenn English wrote:
On Jul 27, 2015, at 11:49 AM, Michael Fothergill
michael.fotherg...@googlemail.com wrote:
On 27 July 2015 at 18:27, Mark Allums m...@allums.xyz wrote:
On 07/27/2015 08:46 AM, Hans wrote:
Am Montag, 27. Juli 2015, 08:13:29 schrieb john vera:
In
Mart van de Wege wrote on 07/27/2015 12:49 AM:
Gary Dale garyd...@torfree.net writes:
On 26/07/15 02:44 PM, Mart van de Wege wrote:
Gary Dale garyd...@torfree.net writes:
Upgrading to sid is asking for trouble. Sid isn't called unstable for
nothing.
I know. I really do. I only have been
Boa Noite,
Alguém desapegando de alguma placa ALIX com 3 entradas RJ45?
Ou sabem me indicar aqui no Brasil onde consigo a um preço bom..
Abraços
*--*
Att
Marcos Carraro
about.me/marcoscarraro
Renaud (Ron) OLGIATI wrote on 07/26/2015 03:40 PM:
On Sun, 26 Jul 2015 15:27:50 -0500
John Hasler jhas...@newsguy.com wrote:
I want to be able to set the time if for some reason the clock is
completely incorrect (this occurred from time to time in the past).
Use your wristwatch.
Or better,
Hola listeros. Hace unos dias comentábamos sobre el plugin Adobe Flash y
sus vulnerabilidades.Alguien sabe si ya hicieron las correcciones al
mismo? NO tengo INTERNET.
Gracias
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Hi,
Nicolas George wrote:
Do try strace, and if
you know a bit of SMTP, which seems the case, you should be able to spot the
problem in a few minutes.
It's nearly too late in the evening. But (with alpine 2.20 from
source):
read(9, 220 gmx.com (mrgmx102) Nemesis E..., 8192) = 52
On Mon, 2015-07-27 at 14:55 -0400, Renaud OLGIATI wrote:
Guys, this is not tough. Just put non-free in your apt sources
file line(s), and you'll never see the difference. The firmware in
not unencumbered; it's $free, but not beer free. You can get it any
time you ask for it.
We are
Hi,
David Wright a écrit :
It would be nice to know which port numbers alpine is trying to
use.
Nicolas George:
strace can tell you that and much more, especially if the encryption is done
by a separate program.
I do know the port number if stunnel is involved.
Whatever, the ports and
Le nonidi 9 thermidor, an CCXXIII, Thomas Schmitt a écrit :
strace can tell you that and much more, especially if the encryption is done
by a separate program.
Whatever, the ports and encryption are ok. It's alpine's
way of speaking ESMTP and/or Nemesis' unfilfilled ESMTP
expectations which
Bonjour,
Perso et pro, j'achètes mes machines fixes et portable chez pcubuntoo
Alain est très serviable et de bon conseil (j'ai 3 fixes et 2
portables). Donc j'en suis content.
Benoit
message d'origine-
De: cont...@baal.fr Pour:
On Monday 27 July 2015 16:53:14 Thomas Schmitt wrote:
The problem with defending the purity of the English language is that
English is about as pure as a cribhouse whore. We don't just borrow words;
on occasion, English has pursued other languages down alleyways to beat
them unconscious and
Bonsoir
Si vous résidez en région parisienne...
Vous êtes invités à la réunion Parinux de demain près de la Bastille
http://parinux.org/content/reunion-le-28-juillet-2015-la-fph
et au Premier Samedi du 1er août à la Cité des sciences
On Tue, Jul 28, 2015 at 3:27 AM, John L. Ries jr...@salford-systems.com wrote:
I understand the desire to put free software first and segregate out
packages that don't meet the standard, but if a free driver is not available
for one's hardware, then I figure the least Debian could do is to
On Monday 27 July 2015 19:30:20 Glenn English wrote:
On Jul 27, 2015, at 11:49 AM, Michael Fothergill
michael.fotherg...@googlemail.com wrote:
On 27 July 2015 at 18:27, Mark Allums m...@allums.xyz wrote:
On 07/27/2015 08:46 AM, Hans wrote:
Am Montag, 27. Juli 2015, 08:13:29 schrieb john
On Tue, Jul 28, 2015 at 7:46 AM, Stephen Powell zlinux...@wowway.com wrote:
On Mon, 27 Jul 2015 06:48:48 -0400 (EDT), Joel Rees wrote:
I also sometimes get applications I had closed coming back when I log back
in.
XFCE sometimes gets its states wedged.
There is a command I sometimes used
Processador AMD GEODE x86
http://www.pcengines.ch/alix.htm
https://pt.wikipedia.org/wiki/Geode_(processador)
*--*
Att
Marcos Carraro
about.me/marcoscarraro
2015-07-27 19:20 GMT-03:00 Julio julio.s...@gmail.com:
Curiosidade, que arquitetura é ?
On 27-07-2015 18:11, Marcos Carraro wrote:
Greetings all;
Is there an autoloading routine I know not about that chooses to see if
either the intel-microdoe is loaded and applied, or the amd64-microcode
is applied?
I cannot find a reference to the attempt to load it in the dmesg report
on this machine I am building.. Apt-get install
Hola, alguien pudo instalar esta placa ATI RADEON HD4250 con
aceleración gráfica?.
Yo la tenía instalada con el driver propietario, pero con las
actualizaciones de kernel al parecer no funciona más. Me pasó y lo leí
en varios foros.
En este momento tengo instalado Debian Jessie (kernel
On Mon, 27 Jul 2015 16:46:21 -0400 (CDT)
c...@pinarte.cult.cu wrote:
Hola listeros. Hace unos dias comentábamos sobre el plugin Adobe Flash y
sus vulnerabilidades.Alguien sabe si ya hicieron las correcciones al
mismo? NO tengo INTERNET.
Gracias
--
To UNSUBSCRIBE, email to
Le 27/07/15 à 16:50, maderios mader...@gmail.com a écrit :
M Le 27/07/2015 15:49, Daniel Caillibaud a écrit :
M Le 27/07/15 à 14:15, maderios mader...@gmail.com a écrit :
M M Pas claire cette histoire... Tu ne parlais pas de Cups, il fallait le
M M dire plus tôt...
M
M Euh, là t'abuses ;-)
Curiosidade, que arquitetura é ?
On 27-07-2015 18:11, Marcos Carraro wrote:
placa ALIX
--
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On Mon, 27 Jul 2015 06:48:48 -0400 (EDT), Joel Rees wrote:
I also sometimes get applications I had closed coming back when I log back in.
XFCE sometimes gets its states wedged.
There is a command I sometimes used to use to reset the wedged state
when the title/menubar disappeared. I'm
Le 27/07/2015 19:40, daniel huhardeaux a écrit :
Le 27/07/2015 19:01, Cyrille a écrit :
Je revends du Dell et n'ai jamais eu de soucis pour y installer Linux.
Un des derniers portables Dell que j'ai livré sous Ubuntu
Vostro 3546/i3-4005U 4G 500G 15.6
Aurais tu un site pour voir ce que tu
1 - 100 of 130 matches
Mail list logo