Thank you Lars for clarifying.
I will see what I can use in our environment.
Thank you again,
Yogi.
On Fri, Apr 3, 2015 at 11:03 PM, Lars Ellenberg lars.ellenb...@linbit.com
wrote:
On Wed, Apr 01, 2015 at 12:16:38PM +0100, Yogendramummaneni Prasad wrote:
Hello,
At the moment, we are
On 2015-04-03 17:03, Lars Ellenberg wrote:
You can use heartbeat 3.0.6 (if you only use haresources mode).
You can google for ticket # but basically epel heartbeat maintainer
replied to my rfa with I don't use heartbeat anymore so no. I meant to
post that here but forgot.
So there is no
Hello,
At the moment, we are using heartbeat on RedHat-5.8 using the below
packages:
[root@p118278vaps2011 ~]# rpm -qa|grep heartbeat
heartbeat-2.1.4-11.el5
heartbeat-stonith-2.1.4-11.el5
heartbeat-pils-2.1.4-11.el5
Now we are planning to upgrade the OS to Redhat-7.0.
I could not find the same
Hello there,
is it possible to configure custom healthchecks for heartbeat such like testing
a HTTP request or if a process is running?
Unfortunately I can't seem to find any hint or howto on this topic.
Any help appreciated.
___
Linux-HA mailing list
On Wed, Apr 01, 2015 at 12:16:38PM +0100, Yogendramummaneni Prasad wrote:
Hello,
At the moment, we are using heartbeat on RedHat-5.8 using the below
packages:
[root@p118278vaps2011 ~]# rpm -qa|grep heartbeat
heartbeat-2.1.4-11.el5
heartbeat-stonith-2.1.4-11.el5
heartbeat-pils-2.1.4-11.el5
On 03/04/15 06:03 PM, Lars Ellenberg wrote:
On Wed, Apr 01, 2015 at 12:16:38PM +0100, Yogendramummaneni Prasad wrote:
Hello,
At the moment, we are using heartbeat on RedHat-5.8 using the below
packages:
[root@p118278vaps2011 ~]# rpm -qa|grep heartbeat
heartbeat-2.1.4-11.el5
Hi Dimitri,
yes there are 4 pairs, but they are all active. When a node fails, the
other one in the pair just takes everything over.
A different HA is not an option, it has to be heartbeat. I noticed
something called ethmonitor, I can probably notice an IB connection with
it (it has ipoib
Hello,
I have an ether net connection that connects all hosts in a cluster and
the nodes also have an IB connection. I want the failover host to take
over when an IB connection goes down on a host. Is there an example for
how to do this? (I am using ipmi for shutting down hosts etc).
A
On 01/20/2015 01:34 PM, Ron Croonenberg wrote:
Hello,
I have an ether net connection that connects all hosts in a cluster and
the nodes also have an IB connection. I want the failover host to take
over when an IB connection goes down on a host. Is there an example for
how to do this? (I am
- Original Message -
Hi, I installed on HeartBeat,Centos 6.5 on 2 Amazon EC2 machinesthis is the
If you have an option, I'd strongly recommend using the Pacemaker+CMAN stack
in rhel 6.5. Red Hat began supporting pacemaker in 6.5, so it should be
available
to you.
-- Vossel
version:
Hi, I installed on HeartBeat,Centos 6.5 on 2 Amazon EC2 machinesthis is the
version:
[root@ip-10-0-2-68 ha.d]# rpm -qa | grep heartbeat
heartbeat-libs-3.0.4-2.el6.x86_64
heartbeat-3.0.4-2.el6.x86_64
heartbeat-devel-3.0.4-2.el6.x86_64
the floating IP is [root@ip-10-0-2-68 ha.d]# cat haresources
On Thu, Jun 26, 2014 at 01:30:01PM +0200, Lars Ellenberg wrote:
On Tue, Jun 24, 2014 at 11:20:48PM +0300, Pasi Kärkkäinen wrote:
Hello!
I've been seeing heartbeat cluster problems in Linux-based Vyatta and more
recent VyOS networking/router appliances.
These are currently based on
On Tue, Jun 24, 2014 at 11:20:48PM +0300, Pasi Kärkkäinen wrote:
Hello!
I've been seeing heartbeat cluster problems in Linux-based Vyatta and more
recent VyOS networking/router appliances.
These are currently based on Debian Squeeze, and thus are using:
Package: heartbeat
Version:
Hello,
In our project we had the heartbeat cluster with version
heartbeat-2.1.4-0.24.9.
Is it the supported version ?
Kindly assist how to get support for heartbeat cluster issues.
Regards
Venkata G Thota
DLF IT PARK
GTS Services Delivery - India
Chennai
UNIX Administrator
India
Phone:
You should email Linbit (http://linbit.com) as they're the company that
still supports the heartbeat package.
This said, if you are starting a new project, I strongly urge you to
consider corosync + pacemaker. The heartbeat project has not been
actively developed in quite some time, and there
On 2014-06-02T20:37:59, Venkata G Thota venkt...@in.ibm.com wrote:
Hello,
In our project we had the heartbeat cluster with version
heartbeat-2.1.4-0.24.9.
Is it the supported version ?
Kindly assist how to get support for heartbeat cluster issues.
Regards
That looks like a fairly
On 2014-06-02T12:04:23, Digimer li...@alteeve.ca wrote:
You should email Linbit (http://linbit.com) as they're the company that
still supports the heartbeat package.
For completeness, I doubt Linbit will support this version, since 2.1.4
from SLES 10 contains a number of backports from the
On 02/06/14 06:30 PM, Lars Marowsky-Bree wrote:
On 2014-06-02T12:04:23, Digimer li...@alteeve.ca wrote:
You should email Linbit (http://linbit.com) as they're the company that
still supports the heartbeat package.
For completeness, I doubt Linbit will support this version, since 2.1.4
from
On Mon, Jun 02, 2014 at 06:31:09PM -0400, Digimer wrote:
On 02/06/14 06:30 PM, Lars Marowsky-Bree wrote:
On 2014-06-02T12:04:23, Digimer li...@alteeve.ca wrote:
You should email Linbit (http://linbit.com) as they're the company that
still supports the heartbeat package.
For completeness,
On 02/06/14 07:05 PM, Lars Ellenberg wrote:
(Though we at Linbit are still happy
with heartbeat + pacemaker as well).
Heathens! HEATHENS!!
;)
--
Digimer
Papers and Projects: https://alteeve.ca/w/
What if the cure for cancer is trapped in the mind of a person without
access to education?
Krille
Gesendet: Samstag, 25. Januar 2014 01:46
An: linux-ha@lists.linux-ha.org
Betreff: Re: [Linux-HA] heartbeat failover
On Thu, 23 Jan 2014 16:45:04 + bjoern.bec...@easycash.de wrote:
Uhhh..I got the same configuration as the example config you sent me
now. But I cause high cpu load
side?
Best regards
Björn
-Ursprüngliche Nachricht-
Von: linux-ha-boun...@lists.linux-ha.org
[mailto:linux-ha-boun...@lists.linux-ha.org] Im Auftrag von Becker, Björn
Gesendet: Donnerstag, 23. Januar 2014 17:45
An: linux-ha@lists.linux-ha.org
Betreff: Re: [Linux-HA] heartbeat failover
without multicast?
Best regards
Björn
-Ursprüngliche Nachricht-
Von: linux-ha-boun...@lists.linux-ha.org
[mailto:linux-ha-boun...@lists.linux-ha.org] Im Auftrag von Digimer
Gesendet: Mittwoch, 22. Januar 2014 20:36
An: General Linux-HA mailing list
Betreff: Re: [Linux-HA] heartbeat failover
2014 20:36 An: General Linux-HA
mailing list Betreff: Re: [Linux-HA] heartbeat failover
On 22/01/14 10:44 AM, bjoern.bec...@easycash.de wrote:
Hello,
I got a drbd+nfs+heartbeat setup and in general it's working. But
it takes to long to failover and I try to tune this.
When node 1
...@lists.linux-ha.org
[mailto:linux-ha-boun...@lists.linux-ha.org] Im Auftrag von Lukas Grossar
Gesendet: Donnerstag, 23. Januar 2014 16:54
An: linux-ha@lists.linux-ha.org
Betreff: Re: [Linux-HA] heartbeat failover
Hi Björn
Here ist an example how you can setup corosync to use Unicast UDP:
https
-Ursprüngliche Nachricht-
Von: linux-ha-boun...@lists.linux-ha.org
[mailto:linux-ha-boun...@lists.linux-ha.org] Im Auftrag von Becker, Björn
Gesendet: Donnerstag, 23. Januar 2014 17:28
An: linux-ha@lists.linux-ha.org
Betreff: Re: [Linux-HA] heartbeat failover
Hi Lukas,
thank you. Well
Hello,
I got a drbd+nfs+heartbeat setup and in general it's working. But it takes to
long to failover and I try to tune this.
When node 1 is active and I shutdown node 2, then node 1 try to activate the
cluster.
The problem is, node 1 already got the primary role and when re-activating it
On 22/01/14 10:44 AM, bjoern.bec...@easycash.de wrote:
Hello,
I got a drbd+nfs+heartbeat setup and in general it's working. But it takes to
long to failover and I try to tune this.
When node 1 is active and I shutdown node 2, then node 1 try to activate the
cluster.
The problem is, node 1
Hi Lars,
We observed one pattern with these errors - at most of the case,on both VMs
, these errors came at the same time.
We are suspecting either network issue in that case only late heartbeat
error will come not Gmain_timeout_dispatch related errors right ? or
VM is getting paused for sometime
On Thu, Nov 14, 2013 at 04:46:16PM +0530, Savita Kulkarni wrote:
Hi,
Recently we are seeing lots of heartbeat errors related to
Gmain_timeout_dispatch
on our system.
I checked on mailing list archives if other people have faced this issue.
There are few email threads regarding this but
Hi,
Recently we are seeing lots of heartbeat errors related to
Gmain_timeout_dispatch
on our system.
I checked on mailing list archives if other people have faced this issue.
There are few email threads regarding this but people are seeing this issue
in case of high load.
On our system there is
Hello guys,
I'm trying to set up a Active/Active Heartbeat configuration. I would like
to have both nodes responding on the same IP balancing the requests.
I'm able to do that, but when second node has the resource configured with
another virtual IP.
Is that only possible with LVS?
Another
Hi folks!
I have a 2-node setup for MySQL HA. The two nodes access a shared set
of SAS disks over a backplane. The services/resources are: an IP
address, an LVM VG, two mountpoints and MySQL.
Using heartbeat 3.0.4 with a v1 configuration this is a piece of cake.
Except apparently for stonith.
On Wed, Jul 17, 2013 at 6:03 PM, Martin Langhoff
martin.langh...@gmail.com wrote:
But the 'stonith' script/binary and the scripts that the old
documentation indicates aren't there anymore (when I install on
RHEL6.4).
Configuring stonith_host external foo bar baz led me in the right
direction.
On 17/07/13 20:43, Martin Langhoff wrote:
On Wed, Jul 17, 2013 at 6:03 PM, Martin Langhoff
martin.langh...@gmail.com wrote:
But the 'stonith' script/binary and the scripts that the old
documentation indicates aren't there anymore (when I install on
RHEL6.4).
Configuring stonith_host external
On Wed, Jul 17, 2013 at 9:34 PM, Digimer li...@alteeve.ca wrote:
The easiest, native way under RHEL/CentOS is to use corosync + cman +
rgmanager. The configuration you are describing will be simple and will be
properly supported until 2020 (at least), and not need hacks.
If you're interested
On 18/07/13 00:12, Martin Langhoff wrote:
On Wed, Jul 17, 2013 at 9:34 PM, Digimer li...@alteeve.ca wrote:
The easiest, native way under RHEL/CentOS is to use corosync + cman +
rgmanager. The configuration you are describing will be simple and will be
properly supported until 2020 (at least),
Hi,
I'm using Ubuntu 12.04 + Heartbeat 3.0.5-3ubuntu2 to provide high availability
for some IP addresses.
I want to configure an IPv6 address on my haresources. I did this:
File /etc/heartbeat/haresources:
server.domain.com \
nbsp;nbsp;nbsp; 192.168.2.62/32/eth1 \
nbsp;nbsp;nbsp;
Ho Thiago,
Heartbeat is deprecated and has not been developed in some time.
There are no plans to restart development, either. It is _strongly_
advised that new setups use corosync + pacemaker. You can use the IPv6
resource agents with it, too.
The best place to look is on
On Fri, Jun 14, 2013 at 03:29:49PM -0300, lis...@adminlinux.com.br wrote:
Hi,
I'm using Ubuntu 12.04 + Heartbeat 3.0.5-3ubuntu2 to provide high
availability for some IP addresses.
I want to configure an IPv6 address on my haresources. I did this:
File /etc/heartbeat/haresources:
Hi,
I'm using Ubuntu 12.04 + Heartbeat 3.0.5-3ubuntu2 to provide high availability
for some IP addresses.
I want to configure an IPv6 address on my haresources. I did this:
File /etc/heartbeat/haresources:
server.domain.com \
192.168.2.62/32/eth1 \
192.168.2.64/32/eth1 \
I have two clusters that are both running CentOS 5.6 and
heartbeat-3.0.3-2.3.el5 (from the clusterlabs repo). THey are running
slightly different pacemaker versions (pacemaker-1.0.9.1-1.15.el5 on the
first one and pacemaker-1.0.12-1.el5 on the other) They both have
identical ha.cf files except
I know it's tacky to reply to myself, but I can answer one of my
questions after another 15 minutes or so of poring through logs:
On Tue, 2013-05-28 at 10:37 -0600, Greg Woods wrote:
The questions are what do these messages actually mean, why is one
cluster logging them and not the other,
On 29/05/2013, at 2:37 AM, Greg Woods wo...@ucar.edu wrote:
I have two clusters that are both running CentOS 5.6 and
heartbeat-3.0.3-2.3.el5 (from the clusterlabs repo). THey are running
slightly different pacemaker versions (pacemaker-1.0.9.1-1.15.el5 on the
first one and
On Wed, 2013-05-29 at 07:50 +1000, Andrew Beekhof wrote:
respawn hacluster /usr/lib64/heartbeat/ipfail
crm respawn
I don't know about the rest, but definitely do not use both ipfail and crm.
Pick one :)
I guess I will have to look into what ipfail really does. I have a half
dozen
On 29/05/2013, at 8:05 AM, Greg Woods wo...@ucar.edu wrote:
On Wed, 2013-05-29 at 07:50 +1000, Andrew Beekhof wrote:
respawn hacluster /usr/lib64/heartbeat/ipfail
crm respawn
I don't know about the rest, but definitely do not use both ipfail and crm.
Pick one :)
I guess I will have
Hello,
I'm trying to use heartbeat STABLE-3.0.5 with the config files
ha.cf:
logfile/var/log/ha-log
bcastenp0s3
auto_failback on
nodeha0
nodeha1
haresources:
ha0 192.168.56.100
authkeys:
auth 1
1 crc
but when heartbeat is trying to release IP (delete IP on alias interface)
it
Hi Linux-HA staff
I already tried to installed heartbeat with pacemaker and resource-agent to
control httpd service on my test server.
But after check log seem heartbeat kill httpd process id after 2 seconds on
ha-debug,
so my os is RHEL5.8 amd64 bit ,
Apache = 2.2.3-76
Heartbeat and lib =
Hi Nick,
Could you privide which version of resource-agents you're using?
Prior to 3.9.2, IPv6addr requires a static IPv6 address with the
exactly same prefix to find out an apropriate nic; so you should have
statically assigned 2600:3c00::34:c003/116 on eth0 for example.
As of 3.9.3, it has
Looks like 3.9.2-5. So I need to statically assign the address I want to
use before using it with IPv6addr?
On Mar 25, 2013 3:44 AM, Keisuke MORI keisuke.mori...@gmail.com wrote:
Hi Nick,
Could you privide which version of resource-agents you're using?
Prior to 3.9.2, IPv6addr requires a
2013/3/25 Nick Walke tubaguy50...@gmail.com:
Looks like 3.9.2-5. So I need to statically assign the address I want to
use before using it with IPv6addr?
Yes.
On Mar 25, 2013 3:44 AM, Keisuke MORI keisuke.mori...@gmail.com wrote:
Hi Nick,
Could you privide which version of
That works. Thanks!
Nick
On Mon, Mar 25, 2013 at 4:22 AM, Keisuke MORI keisuke.mori...@gmail.comwrote:
2013/3/25 Nick Walke tubaguy50...@gmail.com:
Looks like 3.9.2-5. So I need to statically assign the address I want to
use before using it with IPv6addr?
Yes.
On Mar 25, 2013 3:44
I'm trying to add an IPv6 address to a load balancer cluster. I set up the
primitives like so:
primitive ip3 ocf:heartbeat:IPv6addr \
params ipv6addr=2600:3c00::0034:c007 nic=eth0:3 \
op monitor interval=5s \
meta target-role=Started
primitive ip3arp ocf:heartbeat:SendArp \
Hello,
ipv6addr=2600:3c00::0034:c007
from the manpage of ocf_heartbeat_IPv6addr it looks like that you have
to specify the netmask so try:
ipv6addr=2600:3c00::0034:c007/64 assuiming that you're in a /64.
Cheers,
Thomas
___
Linux-HA
Thanks for the tip, however, it did not work. That's actually a /116. So
I put in 2600:3c00::0034:c007/116 and am getting the same error. I
requested that it restart the resource as well, just to make sure it wasn't
the previous error.
Nick
On Sun, Mar 24, 2013 at 3:55 AM, Thomas
Hello Nick
Try to use nic=eth0 instead of nic=eth0:3
thanks
2013/3/24 Nick Walke tubaguy50...@gmail.com
Thanks for the tip, however, it did not work. That's actually a /116. So
I put in 2600:3c00::0034:c007/116 and am getting the same error. I
requested that it restart the resource
Hello Nick,
Thanks for the tip, however, it did not work. That's actually a /116.
So I put in 2600:3c00::0034:c007/116 and am getting the same
error. I requested that it restart the resource as well, just to make
sure it wasn't the previous error.
now, I had to try it:
node
On Sun, 2013-03-24 at 01:36 -0700, tubaguy50035 wrote:
params ipv6addr=2600:3c00::0034:c007 nic=eth0:3 \
Are you sure that's a valid IPV6 address? I get headaches every time I
look at these, but it seems a valid address is 8 groups, and you've got
5 there. Maybe you mean
I don't know what I'm doing wrong then. I copied exactly what you put in
and now I'm getting these errors:
ipv6test_start_0 (node=tek-lin-lb1, call=25, rc=1, status=complete):
unknown error
ipv6test_start_0 (node=tek-lin-lb2, call=20, rc=1, status=complete):
unknown error
Looking in my syslog I
Hello Nick,
Anything I need to do to allow IPv6... or something?
I agree with Greg here. Have you tried setting the address manually?
ip -6 addr add ip/cidr dev eth0
ip -6 addr show dev eth0
ip -6 addr del ip/cidr dev eth0
ip -6 addr show dev eth0
(node-62) [~] ip -6 addr add
From the first node:
nick@tek-lin-lb1:~$ sudo ip -6 addr add 2600:3c00::34:c007/116 dev eth0
nick@tek-lin-lb1:~$ sudo ip -6 addr show dev eth0
3: eth0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qlen 1000
inet6 2600:3c00::34:c007/116 scope global
valid_lft forever preferred_lft forever
Hello Nick,
I shouldn't be able to do that if the IPv6 module wasn't loaded,
correct?
that is correct. I tried modifying my netmask to copy yours. And I get
the same error, you do:
ipv6test_start_0 (node=node-62, call=6, rc=1, status=complete): unknown
error
So probably a bug in the
This the correct place to report bugs?
https://github.com/ClusterLabs/resource-agents
Nick
On Sun, Mar 24, 2013 at 10:45 PM, Thomas Glanzmann tho...@glanzmann.dewrote:
Hello Nick,
I shouldn't be able to do that if the IPv6 module wasn't loaded,
correct?
that is correct. I tried
Hi guys,
I've 4 server with heartbeat and 2 important service install on each..(httpd
and nagios).
I'd like that when httpd service OR nagios service goes down on active node,
the Virtual IP swichting on the other node but the services in the other
node must be always active, even when the
Hello list,
I'm trying to configure/use a 2 nodes cluster but every time I try to start
heartbeat I get the following lines :
Jan 24 09:15:58 attalo-1 heartbeat: [22936]: info: Configuration validated.
Starting heartbeat 3.0.2
Jan 24 09:15:58 attalo-1 heartbeat: [22936]: info: Heartbeat Hg
On Thu, Dec 13, 2012 at 12:41:29AM +0100, Lars Marowsky-Bree wrote:
On 2012-12-13T10:31:55, Andrew Beekhof and...@beekhof.net wrote:
We once moved the ocf-shellfuncs file, which didn't work out here when
I thought we never did this sort of thing because we don't know how
people are using
To anyone who could help possibly:
My current setup:
2 Ubuntu 10.04 LTS servers running heartbeat, pacemaker, apache, and mysql
Heartbeat and pacemaker are running great for my needs with one exception,
currently both nodes are showing mysql as slaves.
I have mysql configured in a master/slave
Am Montag, 10. Dezember 2012, 15:59:16 schrieb codey koble:
To anyone who could help possibly:
My current setup:
2 Ubuntu 10.04 LTS servers running heartbeat, pacemaker, apache, and mysql
Heartbeat and pacemaker are running great for my needs with one exception,
currently both nodes are
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 12/10/2012 10:59 PM, codey koble wrote:
To anyone who could help possibly:
My current setup: 2 Ubuntu 10.04 LTS servers running heartbeat,
pacemaker, apache, and mysql Heartbeat and pacemaker are running
great for my needs with one exception,
On 2012-12-12T13:58:25, Fabian Herschel fabian.hersc...@arcor.de wrote:
I noticed when I tried to promote one of the servers that an error
occurred stating that the ocf:heartbeat:mysql did not support the
feature. I evaluated the script and realized it was an older
version and did not
On Thu, Dec 13, 2012 at 12:24 AM, Lars Marowsky-Bree l...@suse.com wrote:
On 2012-12-12T13:58:25, Fabian Herschel fabian.hersc...@arcor.de wrote:
I noticed when I tried to promote one of the servers that an error
occurred stating that the ocf:heartbeat:mysql did not support the
feature. I
On 2012-12-13T10:31:55, Andrew Beekhof and...@beekhof.net wrote:
We once moved the ocf-shellfuncs file, which didn't work out here when
I thought we never did this sort of thing because we don't know how
people are using our stuff externally.
We did it in a backwards-compatible manner; or at
Hi friend:
I want know heartbeat is support oracle ASM now??
HILL FANG
Engineer
Guangzhou Ericsson Communication Services Co.,Ltd.(GTC)
SI Support
2 /F, NO. 1025 Gaopu Road, Tianhe Software Park,Tianhe District, Guangzhou,
510663, PR China
Phone +86 020-85117631
Fax +86 020-29002699
On 11/15/2012 05:00 AM, Hill Fang wrote:
Hi friend:
I want know heartbeat is support oracle ASM now??
The heartbeat project has been deprecated for some time. There are no
plans to continue it's development. I am unsure of it's supported state
on Oracle, but regardless, I would advice you
There is an RA for Oracle that can be used with Pacemaker. Generally ASM
behaves like a regular Oracle instance, so you can try it.
On Nov 15, 2012 8:57 AM, Hill Fang hill.f...@ericsson.com wrote:
Hi friend:
I want know heartbeat is support oracle ASM now??
HILL FANG
Engineer
On 2012-11-15T10:00:21, Hill Fang hill.f...@ericsson.com wrote:
Hi friend:
I want know heartbeat is support oracle ASM now??
No - and yes.
Oracle RAC (I assume that's the context for ASM?) does not tolerate any
cluster solution except itself. This is not supported together with
El 08/10/2012 20:56, Andreas Kurz escribió:
On 10/08/2012 09:42 PM, Nicolás wrote:
El 28/09/2012 20:42, Nicolás escribió:
Hi all!
I'm new to this list, I've been looking to get some info about this but
I haven't seen anything, so I'm trying this way.
I've successfully configured a 2-node
El 28/09/2012 20:42, Nicolás escribió:
Hi all!
I'm new to this list, I've been looking to get some info about this but
I haven't seen anything, so I'm trying this way.
I've successfully configured a 2-node cluster with DRBD + Heartbeat +
Pacemaker. It works as expected.
The problem comes
On 10/08/2012 09:42 PM, Nicolás wrote:
El 28/09/2012 20:42, Nicolás escribió:
Hi all!
I'm new to this list, I've been looking to get some info about this but
I haven't seen anything, so I'm trying this way.
I've successfully configured a 2-node cluster with DRBD + Heartbeat +
Pacemaker. It
On Tue, Aug 7, 2012 at 1:42 AM, Andy Furtado awf...@yahoo.com wrote:
Hello,
Is it possible to setup an n-to-1 cluster configuration and have heartbeat
manage a different VIP for each virtual pair.
The n-to-1 configuration would have a single slave node, able to take over
for any one of
On Fri, Aug 3, 2012 at 5:18 PM, Yount, William D
yount.will...@menloworldwide.com wrote:
I am using pacemaker and corosync. For some reason I keep getting this error
in my messages log:
ERROR: Cannot chdir to [/var/lib/heartbeat/cores/root]: No such file or
directory
Should I not worry
root.
Kind of an odd problem though.
-Original Message-
From: linux-ha-boun...@lists.linux-ha.org
[mailto:linux-ha-boun...@lists.linux-ha.org] On Behalf Of Yount, William D
Sent: Friday, August 03, 2012 2:18 AM
To: linux-ha@lists.linux-ha.org
Subject: [Linux-HA] Heartbeat Error
I
I am using pacemaker and corosync. For some reason I keep getting this error in
my messages log:
ERROR: Cannot chdir to [/var/lib/heartbeat/cores/root]: No such file or
directory
Should I not worry about that since I am using corosync and not heartbeat
William
, William D
Sent: Friday, August 03, 2012 2:18 AM
To: linux-ha@lists.linux-ha.org
Subject: [Linux-HA] Heartbeat Error
I am using pacemaker and corosync. For some reason I keep getting this error in
my messages log:
ERROR: Cannot chdir to [/var/lib/heartbeat/cores/root]: No such file or
directory
On Tue, Jul 24, 2012 at 04:01:40PM +0100, Aboubakr Seddik Ouahabi wrote:
Hey there, I've created a thread somewhere, but I guess this is the right
place to seek help for this, and here is my issue as stated there:
Ok guys, that was very much appreciated and I thank you again. For now, I
On Wed, Jul 25, 2012 at 1:01 AM, Aboubakr Seddik Ouahabi
ouaha...@gmail.com wrote:
Hey there, I've created a thread somewhere, but I guess this is the right
place to seek help for this, and here is my issue as stated there:
Ok guys, that was very much appreciated and I thank you again. For
Hey there, I've created a thread somewhere, but I guess this is the right
place to seek help for this, and here is my issue as stated there:
Ok guys, that was very much appreciated and I thank you again. For now, I
just want to get heartbeat to function as it should and I don't want to
create a
Hi,
On Wed, Jul 11, 2012 at 04:24:42AM +0700, Nanang Purnomo wrote:
I want to implement a failover cluster server with heartbeat, but the
problem I use vpn network. Is the heartbeat can be run through two
different networks?
Sure. Just make sure that the port is open and that various
I want to implement a failover cluster server with heartbeat, but the
problem I use vpn network. Is the heartbeat can be run through two
different networks?
I hope you give me solution,please
Best Regards,
Nanang
___
Linux-HA mailing list
Hi,
I have a question about heartbeat, if I have three services, apache, mysql and
sendmail,if apache is down, heartbeat will switch all the services to the
standby server, right?
If so, how to configure heartbeat to avoid this happen?
Very Appreciated.gm
Am Freitag, 20. April 2012 12:42:16 schrieb sgm:
Hi,
I have a question about heartbeat, if I have three services, apache, mysql
and sendmail,if apache is down, heartbeat will switch all the services to
the standby server, right?
It's depending on configuration - also possible ...
If so,
Il giorno Ven 20 Apr 2012 12:42:16 CEST, sgm ha scritto:
Hi,
I have a question about heartbeat, if I have three services, apache, mysql
and sendmail,if apache is down, heartbeat will switch all the services to the
standby server, right?
If so, how to configure heartbeat to avoid this
On 4/20/2012 at 05:42 AM, sgm sgm...@yahoo.com.cn wrote:
Hi,
I have a question about heartbeat, if I have three services, apache, mysql
and sendmail,if apache is down, heartbeat will switch all the services to the
standby server, right?
Maybe. It depends on how you have built and
Thanks Lars..
problem solved. I changed the asterisk init script to be idempotent.
Regards,
Douglas
On Wed, May 2, 2012 at 9:25 AM, Lars Ellenberg lars.ellenb...@linbit.comwrote:
On Mon, Apr 30, 2012 at 01:52:05PM -0300, Douglas Pasqua wrote:
Hi friends,
I create a linux ha solution
On Mon, Apr 30, 2012 at 01:52:05PM -0300, Douglas Pasqua wrote:
Hi friends,
I create a linux ha solution using 2 nodes: node-a and node-b.
My /etc/ha.d/ha.cf:
use_logd yes
keepalive 1
deadtime 90
warntime 5
initdead 120
bcast eth6
node node-a
node node-b
crm off
auto_failback
Hi friends,
I create a linux ha solution using 2 nodes: node-a and node-b.
My /etc/ha.d/ha.cf:
use_logd yes
keepalive 1
deadtime 90
warntime 5
initdead 120
bcast eth6
node node-a
node node-b
crm off
auto_failback off
My /etc/ha.d/haresources
node-a x.x.x.x/24 x.x.x.x/24 x.x.x.x/24 service1
On 23 Apr 2012, at 02:23, Net Warrior wrote:
auto_failback on
No. As far as I'm aware this is to control what happens when your initial node
recovers. If you have 2 nodes, a and b, and a is active, but then fails, b will
take over, but when a is fixed and recovers, heartbeat will 'fail back'
Hi, Net Warrior!
What version of HA/Pacemaker do you use?
Did you already RTFM - e.g.
http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Pacemaker_Explained
- or:
http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Clusters_from_Scratch
HTH
Nikita Michalko
Am Montag, 23.
Hi Nikita
This is the version
heartbeat-3.0.0-0.7
My aim is to, if node1 is powered off or losts it's ethernet
connection,. node2 wont make the failover automatically, I want to
make it manually, but could not find how to accomplish that.
Thanks for your time and support
Best regards
Why even use heartbeat then - Just manually ifconfig the interface.
On 4/23/12 7:39 AM, Net Warrior wrote:
Hi Nikita
This is the version
heartbeat-3.0.0-0.7
My aim is to, if node1 is powered off or losts it's ethernet
connection,. node2 wont make the failover automatically, I want to
1 - 100 of 1067 matches
Mail list logo
