/lower frequencies can be
filtered.
Oleg
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Hi, Andreas.
So far, I tried cascading them and running fpga configuration twice. It
failed - probably because I used a wrong script.
I will try to make double configuration work this week.
And well, I'm busy with our pano camera currently.
Best regards,
Oleg
On 7 April 2010 02:11, Andreas Bean
(192.168.0.9 - System Preferences)
and plug it to your wi-fi router - that would be the most effective solution
of the problem.
Best regards,
Oleg Dzhimiev
On 10 June 2011 01:19, Tom Sparks tom_a_spa...@yahoo.com.au wrote:
--- On *Fri, 10/6/11, Andrey Filippov support-list@support.elphel.com
-vo x11 -zoom ?
Best regards,
Oleg
2011/7/10 李伟 rockind...@163.com
**
Hi,
Thanks for reply. I have already tried the links, but the problems are
still there.I reduced the resolution below 800*600, and try to see the video
with the camvc, MPlayer and VLC. But all of them did not work.
I
Andreas,
In the current firmware (or starting from ~8.0.9.1) the timestamp of the
master camera is encoded in the sync signal (can be verified with
oscilloscope) and is written into the slave camera images exif headers - but
first you need to set the triggering correctly.
Regards,
Oleg
On 20
Hi Diana,
No, for password just hit Enter (it's empty for anonymous user download
from SourceForge). After that you should have a elphel353-8.1.0.5 folder
on the same level with install_elphel inside, right?
regards,
Oleg
On 19 August 2011 12:53, Diana Carrigan dianaejohn...@maxim-ic.com wrote
. The same
cris tools log?
4) if non above worked - could you please send the results.
Around next Tuesday we will have a live-dvd iso image with cris-dist
preinstalled.
Oleg
* Error in function called from file: configure-files/common/common =
./configure:
compiler: Cannot not find compiler
Dear Jason,
Here are the current instructions for reflashing:
1. First check:
1.1 There's an /nfs (absolute path) folder. Its structure is
/nfs/images/
/nfs/latest80/ - a link that points to /nfs/images/software_version/
1.2 Locate where the CVS project is checked out, should be -
48a0 0) where 48 is sensor's i2c address (shifted by 1 bit to
the right) and a0 is the test mode register).
Regards,
Oleg
On 6 December 2011 12:24, Douglass, Woodrow wdougl...@redzone.com wrote:
Hello all,
I am trying to adjust the clock phase on my elphel 353 camera. I am using
the 7.1.5
the darkest
scene is not blurred. Different default gains for sunny/cloudy conditions
might work. What do you think?
The effective range for adjusting gains is not wide - images get noisier
above 8. You might have already played with it.
Best regards,
Oleg Dzhimiev
Sorry, forgot to post back to the mailing list.
On 12 January 2012 11:09, Oleg support-list@support.elphel.com wrote:
Dear Jason,
1. If I disable the binning mode by set BIN_HOR and BIN_VERT to 0,
why the video/image on output of the camera is always black ?
2. The DCM_HOR and DCM_VERT
there's a plugin JP46_Reader_camera.
The plugin that processes the Eyesis footage is Aberration_Correction -
to get enhanced images you will need kernels for that particular camera.
I could check if we have anything shared online.
Best regards,
Oleg Dzhimiev
On 23 January 2012 23:40, Jim Watters
mounted by the time you first access the recording page. At the
first access after reboot the application for recording
(camogmhttp://wiki.elphel.com/index.php?title=Camogm)
is launched.
Best regards,
Oleg Dzhimiev
On 2 February 2012 13:54, Carlos Padial palidoestud...@gmail.com wrote:
Hi,
i have
* for primary, then *1*, choose defaults after
that. This should create the partition hda1 or display an error.
2. type *p* to check if the partition is created.
3. type *w* to save the partition table. Then proceed to the Step 4 from
the wiki article.
are mtdblocks inside hda?
No
Regards,
Oleg
Carlos,
Could you please send the output of:
1. fdisk -l
2. hdparm -I /dev/hda
3. dmesg
Could you recall what happened before camogm stopped recognizing the hdd ?
Regards,
Oleg
On 2 February 2012 16:36, Carlos Padial palidoestud...@gmail.com wrote:
ok, i follow the wiki again and post you
.
Regards,
Oleg
On 2 February 2012 17:19, Carlos Padial palidoestud...@gmail.com wrote:
# fdisk -l
Note: sector size is 4096 (not 512)
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 1824 cylinders
Units = cylinders of 16065 * 4096 = 65802240 bytes
Disk /dev/hda
- additionally you can verify this
with dmesg, hdparm -l /dev/hda or any other commands... cat
/proc/partitions.
5. Then you can follow the HDD
Formathttp://wiki.elphel.com/index.php?title=HDD_Format
guide.
After that it should be working as the internal HDD used to.
Best regards,
Oleg Dzhimiev
in packages/web/353/php_top
c. at the
sf.nethttp://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/php_top/
Best regards,
Oleg Dzhimiev
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman
a picture of the connector?
Regards,
Oleg
On 19 March 2012 16:48, Carlos Padial palidoestud...@gmail.com wrote:
i get this
---
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide: ETRAX FS built
Do you have any planned dates for the next generation?
It's hard to say anything about the dates, unfortunately.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list
? dhcp or manual? Also how do
you set the wireless address?
--
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo
.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
at a certain distance and a
certain F-number (or focal length), right?
With a varifocal lens you would always need to know what focal length is
set at the moment.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
will stay the same.
I'd go with an external SATA HDD at this point.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 10 May 2012 14:01, The Apertus Team qazav...@gmail.com wrote:
Hello, there,
If I understood correctly, my card takes 6.75 seconds to write
first) the HDD to /usr/html/somefolder and it will be available
as http://camera-ip/somefolder - in other words the webserver document
root is /usr/html/. Or you could create a link in /usr/html/ pointing to
where the HDD is mounted.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801
CPU usage?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
when the streamer
is working.
2. Command top right after the boot + before/after you launch
mplayer could be helpful.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 18 May 2012 06:53, Carlos Padial palidoestud...@gmail.com wrote:
PC's OS - ?
ok
report an error when mplayer
crashes.
killall -9 str
/usr/local/bin/str
Oleg
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
back behave? Yellow
should be solid on, green - blinking.
4. What's your LAN subnet? 192.168.0.xxx? What's the LAN structure?
5. What's you OS? From the command line try ping -b 192.168.0.255 -
what's the output?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel
Carlos,
So, I think the best solution here would be to send the camera to us.
You could try updating the software but most likely it won't work.
Sorry for the troubles.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 21 May 2012 18:41, Carlos Padial
Could you also check the network statistics - packets/lost packets?
Do you have lost packets before streaming? After?
Also, when telnet dies - and after some time comes back alive - do you
have to reconnect or does it look like it hanged?
Check the cables as well.
On 24 May 2012 10:27, Oleg
newer versions of webpack - create a new project and add files
that you got from our CVS repository.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 17 June 2012 00:16, Adam Gibson c3008...@uon.edu.au wrote:
Hi,
** **
I’m trying to get the Elphel
like to use PIN2 you should connect: V+=PIN3,
PIN2=FLASH=GND.
TRIG_OUT should be 0x20. Each GPIO has 2 bits in this register. You
probably saw this page as well -
http://wiki.elphel.com/index.php?title=Trigger
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel
-list_support.elphel.com
--
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
- Firmware.
If not - you could boot from our live usb
(kubuntu-elphel-4.isohttp://community.elphel.com/files/live-dvd/)
and update from there.
Best regards,
Oleg
On 5 October 2012 16:59, Linden Mills-Connery lmil...@gmail.com wrote:
Yup, I'm on an old parsedit. See attached. Will try out the new one
your goal, btw?
For example, you could write a script on php that would be doing the same
things with parsing an xml response in it pretty easily. And you would be
able to call it from a command line or from a browser.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel
to the camera through telnet. Or go http://elphel -
Terminal and type the commands there.
This way of changing the sensor parameters will not be in sync with the
frames' exposure period - so you might be getting a transitional broken
frame(s).
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone
artifacts.
I haven't tried binning with a BW sensor - so, I'm not sure.
Just found this
pagehttp://campus.udayton.edu/~ISSL/index.php/research/binning-artifact-removal/
-
they say they have some code that corrects binning artifacts.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783
Flavio,
Here http://community.elphel.com/files/php_scripts/ there's a file
split_mov.php (get it in an archive). You could try splitting one of the
MOVs to check if they have valid frames at least.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 29
work just upload a sample to our ftp.
Oleg
On 29 October 2012 17:01, flavio soares qazav...@gmail.com wrote:
Something like this?
http://127.0.0.1/home/livre/Desktop/teste/split_mov.php?path=/home/livre/Desktop/teste/s05cp01t03_1351438147_418343.movext=jpeg
It's not working -- sorry, I never
Ok, you just don't have php enabled on the web server.
I see you have been uploading 2 files - one is already done ~21MB and
another one is still being uploaded. Shall I try the 1st one?
Oleg
On 29 October 2012 17:20, flavio soares qazav...@gmail.com wrote:
Ok, one last try. I have Apache
/split_mov_2.php.txt
(erase
.txt extension) - then you will be able to launch it from a command line:
php split_mov_2.php path-to-mov-file extension-of-the-images
example:
php split_mov_2.php /data/oleg/test_flavio/s01p4t2_1351346876_661174.mov
jp4
Though it's not to difficult to enable php
and calibrate it to compensate for the lens distortions - like
in NC353-PHG http://www3.elphel.com/nc353-phg model.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list
/split_mov_2.php.txtcan
split it.
If not - the solution might be replacing the headers with the ones from the
correct footage.
Could you also upload an mkv sample?
Regards,
Oleg
On 17 November 2012 11:21, flavio soares qazav...@gmail.com wrote:
No success here... =/
I uploaded two files to elphel's
on the camera via ftp.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Biel,
What is the delay gstreamer has?
What bandwidth does your wifi have? 100Mb/s?
Also there are smaller php script examples in /usr/html compared to
parsedit.php:
snapfull.php
setparameters_demo.php
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
Hi David,
You could try this
linkhttp://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#Getting_the_first_images
:
http://192.168.0.9:8081/bimg
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
/index.php?title=Elphel_camera_parts_0353-13#0353-13-02_-_Back_Panel.2C_with_holes_for_network.2C_SATA_and_USB_connectors
.
After making the upgrade do I need to change any firmware?
No
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
Biel,
No, just tell you want to upgrade from nc353l to nc353l-369 - we'll send
all the parts you need with all the screws.
Btw, I wasn't correct with the back panel - just a new sticker is enough.
Regards,
Oleg
On 29 March 2013 15:26, Biel Bestué de Luna 7318...@gmail.com wrote:
oops I'm
to 192.168.0.1.1...254.
So, first change the camera address then, the router's address.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http
a valid image and does an update.
A folder name example for image files:
/nfs/latest80/
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http
this is.
At the moment the weight for UAV use can be reduced by using the boards w/o
metal bodies/covers or creating a custom lighter body for the array.
By the way, our office is located in West Valley City and you are welcome
to visit us - just give us a call.
Best regards,
Oleg Dzhimiev
Electronics Engineer
is the logger time.
MasterTimeStamp - time that is written into image's EXIF.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com
-5
[angleY]=-2.3133361816406E-5 [angleZ]=-0.00018213331604004 [gyroX]
=0.089074036315918
Regards,
Oleg
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
\n;
Does it work if you only try to save the log?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
.logindex=1n=100dev=/dev/sda1cmd=stop
);
Oleg
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Patrick,
What's the power source for the HDD when connected to the camera? the same
PC? A picture of your setup might be of help.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 26 July 2013 01:38, Patrick Eisenkeil patethek...@gmx.net wrote:
Yes
Patrick,
Was the HDD detected in the end? or what storage do you use?
Tested. I think there's a little bug in the interface. Won't take long to
fix it - a few hours most likely.
Meanwhile you could try ElphelVision https://www.apertus.org/elphelvision by
Apertus.
Best regards,
Oleg Dzhimiev
into the prefix field.
Regards,
Oleg
On 30 July 2013 13:27, Patrick Eisenkeil patethek...@gmx.net wrote:
First Thank you for your help
No The Hdd does Not work but i Tried it with The smal Storage in The
Camera
I use Elphelvision and my Target is that elphelvision Producers The
Filenames i want
And,
There's no way get rid of the timestamps in the files' names, it's always:
prefixtimestamp.extension
Oleg
On 30 July 2013 12:33, Oleg support-list@support.elphel.com wrote:
Patrick,
Was the HDD detected in the end? or what storage do you use?
Tested. I think there's a little bug
Hi,
No, I was talking about: http://cam-ip - Disk Recorder.
Regards,
Oleg
On 31 July 2013 00:55, Patrick Eisenkeil patethek...@gmx.net wrote:
Hi
I Put all The New Files in The Camera but it still does Not work
I use The elphelvision_interface.php
I use The var/state/camogm_cmd file and use
Recorder renames it after
stop.
The same thing ElphelVision might be doing as well.
Regards,
Oleg
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Hi,
Elphelvision is using camogm_cmd
Camogm_command can Not erase The timestamp right? Is There any Option To
erase The timestamp without The Disk Recorder?
It might be implemented in ElphelVision.
Sebastian?
Regards,
Oleg
___
Support-list mailing
. SENSOR_PHASE - clock phase between the system board and the MUX board -
since the 1st sensor is ok - no need to change it.
Please let me know if everything worked.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
.
Rebuilding the firmware on your PC and reflashing from it would be a
reliable solution for now.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http
Aufsichtsrat: Dieter Kersten (Vorsitzender)
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
--
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783
of compact flash vs. SSD
for local storage.
1Gb/s over network
Theoretically it should be up to 6Gb/s (SATA III) for mSATA SSD - we'll see.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing
Hi,
It looks like a bad SDRAM phase set on the system board. Not sure.
Could you please check (good vs bad)?
a. SDRAM phase telnet/ssh session:
cat /var/log/fpga_sdram_phase
b. Sensor phase:
http://192.168.0.9/parsedit.php?CLK_FPGACLK_SENSORSENSOR_PHASErefreshimmediate
Best regards,
Oleg
Hello,
Please try:
* I =imread('http://192.168.0.9:8081/bimg'
http://192.168.0.9:8081/bimg');*
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http
have a close look at it.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
/parsedit.php?images=4:3:.1
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
(+camera - will be safer in case the adapter
board went bad) and we fix it.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com
accessed by the
cpu.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
.
Could i ask you how to get the Function ,and how to set the initial
value of AX、AY、BX、BY and C?
I haven't dealt with this.
Make test images and use them to estimate these values - look at the
vignetting gradient function and pick several points and solve the system.
Best regards,
Oleg Dzhimiev
with PC's network port or camera's power
supply.
What's the model? Does it have the serial port on the side?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
Hi Hugo,
We can have a look and see if we can fix the camera if you send it to us.
Regards,
Oleg
On 28 May 2014 06:10, hugo chauvet hugo.chau...@gmail.com wrote:
Hello,
When I plug the power supply this morning I get the two LED off. The
camera still receive power because it becomes warm
:
a. Install a program called minicom
b. Set the device to ttyUSB0 or the one under which the converter is
detected.
c. Set settings:
Speed: 115200 8N1
RTS/CTS: None
XON/XOFF : None
Camera:
d. Power on and check if there's any output. Please send the results.
Best regards,
Oleg Dzhimiev
Electronics
.
Settings:
Speed: 115200 8N1
RTS/CTS: None
XON/XOFF : None
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo
TL-WR702N you can make it wireless.
What fields of view the camera are you thinking of?
Where is it mounted while you're swimming?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Hi,
1. terminal:
sudo kate /etc/apt/sources.list
2. add/modify the following lines:
deb http://ppa.launchpad.net/elphel/ppa/ubuntu *natty* main
deb-src http://ppa.launchpad.net/elphel/ppa/ubuntu *natty* main
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
://community.elphel.com/files/dof/index.html (by
varying focal length) - our default sensor (1/2.5 format) is preselected.
Also, since full FoV is for the full res (2592x1944) - the FoV for 1080p
will be proportionally smaller.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
Hi Hugo,
Sorry, it took me to long to answer.
Yes, we received the camera.
The network chip on the system board doesn't work - burnt. It is possible
to replace it.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
://www.rmaelectronics.com/lenses/ - the camera's lens mount is C/CS.
Did you have a chance to speak with Oleg regarding the prices?
Sorry, Olga was busy and now she's on vacation. I'll remind her - she might
be available.
Meanwhile, we got the price list http://www3.elphel.com/price_list
Best
the output needs to mimic the
sensor as well - the compression is done on the system board.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http
,
11000110011100110001100111001100, which is too large. INIT should
contain a
maximum of 32 bits.
On Tue, Aug 12, 2014 at 3:58 PM, gaurav dasondhi
gauravdasondhi2...@gmail.com wrote:
Dear oleg
clarify it : bad bitstream can cause losing connection or
damaging the hardware
is on and left connected to the
camera.
b. if you have Linux, run terminal and type:
telnet 192.168.0.9
root/pass to login, then type:
sync
reboot -f
You can perform this from any telnet program.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
reports from ISE Webpack?
2. What image do you get from the default x353.bit? -
http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/fpga/x3x3/x353.bit
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
- depending on
the required FPS and frame dimensions one might have to lower the
compression quality.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http
that extra steps and add you to the developers if you have an
account on the sf.net.
Thanks,
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http
build those?
After building them manually I get:
libtomcrypt/libtomcrypt.a: could not read symbols: File format not
recognized
collect2: ld returned 1 exit status
make: *** [dropbear] Error 1
Did something wrong probably - looking at it.
Best regards,
Oleg Dzhimiev
Electronics Engineer
regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On 2 October 2014 16:37, Elphel Support Team elphelsupp...@gmail.com
wrote:
-- Forwarded message --
From: Hamid M mokh0...@umn.edu
Date: Wed, Oct 1, 2014 at 1:59 PM
Subject: expected imu data
Hello Hamid,
The parsed logged data looks ok - both, GPS and IMU.
* Fatal error: Maximum execution time of 30 seconds exceeded in
/mnt/flash/html/read_imu_log.php on line 101
The timeout can be set in the PHP configuration
Please, let me know if you need any further help.
Best regards,
Oleg
(wider field of view) - rotate the
ring towards W until you get the best focus.
c. you can also try closing the iris a little to increase the depth of
field.
If no, then a better lens should be tried probably.
What's the image quality? frame dimensions?
Best regards,
Oleg Dzhimiev
Electronics
Apologies, there was a wrong wiring on the picture on our wiki - check out
the corrected version
http://wiki.elphel.com/index.php?title=File:Sync_cable.png.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc
?
You might have already tested it - yes, TRIG_PERIOD of the slave camera
does not have effect in this mode.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list
regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
of
the lens to a have better resolution.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
levels on the ends between 450mm and 900mm
setups?
3.
If both images are broken in the same manner then try to change
the SENSOR_PHASE.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
___
Support-list mailing
1 - 100 of 204 matches
Mail list logo