it should say something like 11.2.0/lib
On Tue, Oct 23, 2012 at 9:40 AM, patrick zandi <[email protected]> wrote: > There is your problem right there.. > LD_LIBRARY_PATH=/ems/u01/ >> >> product/10.2.0/lib: > > > > 10.2 is 32bit -- not 64bit.. so it looks like your DBA are blowing > smoke.. > > > On Tue, Oct 23, 2012 at 9:29 AM, Sandeep Pandey > <[email protected]>wrote: > >> ** Hi Patrick, >> >> Able to do sqlplus and TNSPING as well. >> >> We did LD_LIBRARY_PATH is pointing to the 64bit as per dbs confirms, but >> no hope. >> >> LD_LIBRARY_PATH=/ems/u01/product/10.2.0/lib:/ems/u01/product/10.2.0/lib32 >> is set like this currently. >> >> >> -- >> Sandeep Pandey >> Remedy Developer >> >> >> On Tue, Oct 23, 2012 at 5:59 PM, patrick zandi <[email protected]>wrote: >> >>> ** prior to installing can you use sqlplus and login, >>> can you do a TNSPING? >>> if those are working -- off the 64bit side.. then you should be fine.. >>> but if you LD_LIBRARY_PATH is pointing to the 32bit, first, and not the >>> 64bit first.. >>> and you cannot use the sqlplus from the 11.. this is a great start >>> >>> On Tue, Oct 23, 2012 at 8:27 AM, Sandeep Pandey < >>> [email protected]> wrote: >>> >>>> ** Yes Patrick, >>>> >>>> >>>> You are correct. Yes we are pointing new oracle client 64 bit for >>>> install upgrade. Do you know any fix or solution for this? >>>> >>>> -- >>>> Sandeep Pandey >>>> Remedy Developer >>>> >>>> On Tue, Oct 23, 2012 at 5:50 PM, Patrick Zandi <[email protected]>wrote: >>>> >>>>> ** >>>>> But you are using 7.1 : that does not use 64 bit, so here is the >>>>> thought. Is you box with oracle 32 bit client 10 let's say and 11.2 in the >>>>> same box, so is your selection for the install pointing to the new client? >>>>> Just asking. 2 different paths... Just a thought >>>>> >>>>> Sent from my iPhone >>>>> >>>>> On Oct 23, 2012, at 7:49, Sandeeps Pandey <[email protected]> >>>>> wrote: >>>>> >>>>> ** Hi Patrick, >>>>> >>>>> >>>>> We are using 64 bit clients only. But not able to proceed. >>>>> >>>>> Checked everything tnsnames.ora, listner, env etc in place and running >>>>> fine. >>>>> >>>>> -- >>>>> Sandeep Pandey >>>>> Remedy Developer >>>>> >>>>> >>>>> On Tue, Oct 23, 2012 at 5:08 PM, Patrick Zandi <[email protected]>wrote: >>>>> >>>>>> ** >>>>>> 64 bit libraries >>>>>> You went from 32 to 64 >>>>>> You need 64bit client looks like ur issue >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> On Oct 23, 2012, at 6:55, Karthik <[email protected]> wrote: >>>>>> >>>>>> ** I had this issue way back when i was installing 5.x on HP UX and >>>>>> it was issue with oracle binaries being wrongly installed. >>>>>> >>>>>> Did you check the compatibility matrix and install the correct >>>>>> binaries? Double check this please as the error says the same here >>>>>> >>>>>> - Karthik >>>>>> >>>>>> On 23 October 2012 16:10, Sandeep Pandey <[email protected]>wrote: >>>>>> >>>>>>> ** Dear List, >>>>>>> >>>>>>> We are facing one issue when we trying to upgrade the 7.1 P11 to >>>>>>> 7.6.04 SP 3 ARS on HP-UX i3. We are running installer and one point of >>>>>>> time >>>>>>> getting below error. >>>>>>> >>>>>>> Warning! Failed to connect to the database. >>>>>>> Possible causes: tnsnames.ora does not exist or has incorrect >>>>>>> connection details >>>>>>> Missing 64 bit Oracle client libraries >>>>>>> Insufficient privileges for oracle client libraries. >>>>>>> >>>>>>> Error in insall log: >>>>>>> LOG EVENT {Description=[SET PROPERTY >>>>>>> BMC_LEGACY_ARCFG_EXISTS],Detail=[true]} >>>>>>> (Oct 22 2012 12:49:22.319 PM >>>>>>> +0200),CONFIG,com.bmc.install.task.InstallationPropertiesHelper, >>>>>>> LOG EVENT {Description=[SET PROPERTY >>>>>>> VALIDATION_ERROR_RESULT],Detail=[INVALID_OCI_ORACLE_CONNECTION_UNIX]} >>>>>>> (Oct 22 2012 12:49:22.329 PM >>>>>>> +0200),INFO,com.bmc.install.product.arsuitekit.platforms.arsystemservers.arserver.ARServerDatabaseOptionsValidationTask, >>>>>>> LOG EVENT {Description=[Validation >>>>>>> error],Detail=[INVALID_OCI_ORACLE_CONNECTION_UNIX]} >>>>>>> (Oct 22 2012 12:49:22.764 PM >>>>>>> +0200),CONFIG,com.bmc.install.builder.installanywhere.InstallationTaskAction, >>>>>>> LOG EVENT {Description=[COMPLETED >>>>>>> InstallationTask],Detail=[com.bmc.install.product.arsuitekit.platforms.arsystemservers.arserver.ARServerDatabaseOptionsValidationTask]} >>>>>>> (Oct 22 2012 12:51:12.791 PM >>>>>>> +0200),CONFIG,com.bmc.install.task.InstallationPropertiesHelper, >>>>>>> LOG EVENT {Description=[SET PROPERTY >>>>>>> VALIDATION_ERROR_RESULT],Detail=[VALIDATION_SUCCESS]} >>>>>>> (Oct 22 2012 12:51:12.811 PM >>>>>>> +0200),CONFIG,com.bmc.install.task.InstallationPropertiesHelper, >>>>>>> LOG EVENT {Description=[SET PROPERTY >>>>>>> VALIDATION_FEATURE],Detail=[]} >>>>>>> >>>>>>> We did so many things but no help. >>>>>>> >>>>>>> Anyone see or fix? >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Sandeep Pandey >>>>>>> Remedy Developer >>>>>>> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >>>>>> >>>>>> >>>>>> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >>>>>> >>>>>> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >>>>> >>>>> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >>>>> >>>> >>>> >>>> >>>> >>>> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >>>> >>> >>> >>> >>> -- >>> Patrick Zandi >>> >>> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >>> >> >> >> >> _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ >> > > > > -- > Patrick Zandi > -- Patrick Zandi _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug12 www.wwrug12.com ARSList: "Where the Answers Are"
