i bet they pulled them back as SOP Dennis Saputelli Nicholas Cobb wrote: > > Someone please correct me if I am wrong, but I thought that the power plane > clearance rule in the manufacturing section also included clearance from the > keepout layer around the edge of the board. So far, I have never drawn any > copper on the internal planes to keep them away from the edge of the board, > and they have all turned out with clearance. This may be from the board > house changing this, but I figured I would have heard something. > Nick Cobb > ----- Original Message ----- > From: "Abd ul-Rahman Lomax" <[EMAIL PROTECTED]> > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > Sent: Thursday, November 08, 2001 7:34 PM > Subject: Re: [PEDA] keepoutlayer and planes ?? > > > At 06:02 PM 11/8/01 -0600, Jon Elson wrote: > > > What you need to do is place rectangular fills all around the edges > > >of the board to hold the power planes out of that area. This is what > I've > > >been doing for years. > > > > The practice of copying the outline track to the inner planes, as > described > > by others, and then blowing it out with a global edit to, say, 50 mils, is > > simpler and, with a complex outline, faster. > > > > Mr Elson made some good points about how to do gerber import. One note I > > would add is that Protel, if possible, flashes fills, it does not "fill" > > them, so when they are reimported, they become pads. Yes, pads. This > > introduces certain complications, trying to view solder mask imports. > > > > It's better, I suggest, to view gerbers in CAMtastic or another Gerber > > viewer. But it can be convenient to view them in Protel, and the ability > to > > import gerber is a real plus for many reasons. > > > > > > > > > > [EMAIL PROTECTED] > > Abdulrahman Lomax > > Easthampton, Massachusetts USA
-- ___________________________________________________________________________ www.integratedcontrolsinc.com Integrated Controls, Inc. tel: 415-647-0480 2851 21st Street fax: 415-647-3003 San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *