I would hope that the multi-channel rooms could be used with an external netlist from a different schematic capture package as well. A majority of my netlists come from Orcad and this feature could be a great value to me once it is debugged. I have been following Tim's posts but I'm not sure this can be set up independent of schematic. If so, that is very promising as it is quite tedious to maintain a multi-channel board.
Rob ----- Original Message ----- From: "Tony Karavidas" <[EMAIL PROTECTED]> To: "'Protel EDA Forum'" <[EMAIL PROTECTED]> Sent: Thursday, September 05, 2002 6:08 PM Subject: Re: [PEDA] DXP - Crunch time? > Well Tim Hutcheson is spending quite a bit of effort on rooms right now > (as by his recent posts) and I think his efforts in that particular area > will help it greatly. > > I think SP1 will say a lot for DXP. (in either case if you catch my > drift) > > > > > While I don't like ATS, it would certainly be easier to see a > > value in it if > > DXP would have been the revolutionary change Altium was > > claiming. While > > there are several interface changes and several new features > > (several omitted features too), basically it is still the > > same software just repackaged with a new interface. I guess > > one could argue that the multi-channel capability is a major > > improvement, but from I have been reading in PEDA posts, it > > is still quite buggy and not ready for prime-time. I have > > looked at Situs and I do not see the revolutionary > > improvement there either. Hopefully someone who can take > > more time to put it to the task will prove me wrong. I am > > finding it hard to see what value ATS will bring that we > > didn't have before. Just a major price increase is all I can > > see at the moment concerning PCB and SCH. > > > > Rob > > > > > > > ************************************************************************ > * Tracking #: 5E635ED61FDE2E4E89A9025E716F12CA3DAEA175 > * > ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *