On 08:05 AM 9/10/2003, Frank Gilley said:Jami and all...
>Once you are finished doing whatever it is that you want to do, and you >want to set the display drawing order back to normal, just return to the >same dialog box and use the "Default" button, and everything will be set >back to normal.
NO!!
Do NOT press this button in 99 SE !!!
Pressing this button rewrites the configurations files back to Protel 98 and will permanently set your layer capabilities back to the same era. You will have to either re-install or copy a section from a good file to get them back. Not sure what all effect this has, but I do know that it will get rid of alot of mech layers.
It is easy enough to rewrite the relevant section of the appropriate ini file to get the layers back but it is certainly irritating. No need to re-install. I haven't got the details of the ini file and the setting to hand but it should be on the archive somewhere.
Here are the details:
Copy and paste the following entries over the existing entries in the ADVPCB99SE.ini file which is located in the Windows installation directory:
LayerDrawingOrder0=74 LayerDrawingOrder1=33 LayerDrawingOrder2=34 LayerDrawingOrder3=75 LayerDrawingOrder4=0 LayerDrawingOrder5=1 LayerDrawingOrder6=2 LayerDrawingOrder7=3 LayerDrawingOrder8=4 LayerDrawingOrder9=5 LayerDrawingOrder10=6 LayerDrawingOrder11=7 LayerDrawingOrder12=8 LayerDrawingOrder13=9 LayerDrawingOrder14=10 LayerDrawingOrder15=11 LayerDrawingOrder16=12 LayerDrawingOrder17=13 LayerDrawingOrder18=14 LayerDrawingOrder19=15 LayerDrawingOrder20=16 LayerDrawingOrder21=17 LayerDrawingOrder22=18 LayerDrawingOrder23=19 LayerDrawingOrder24=20 LayerDrawingOrder25=21 LayerDrawingOrder26=22 LayerDrawingOrder27=23 LayerDrawingOrder28=24 LayerDrawingOrder29=25 LayerDrawingOrder30=26 LayerDrawingOrder31=27 LayerDrawingOrder32=28 LayerDrawingOrder33=29 LayerDrawingOrder34=30 LayerDrawingOrder35=31 LayerDrawingOrder36=32 LayerDrawingOrder37=35 LayerDrawingOrder38=36 LayerDrawingOrder39=37 LayerDrawingOrder40=38 LayerDrawingOrder41=39 LayerDrawingOrder42=40 LayerDrawingOrder43=41 LayerDrawingOrder44=42 LayerDrawingOrder45=43 LayerDrawingOrder46=44 LayerDrawingOrder47=45 LayerDrawingOrder48=46 LayerDrawingOrder49=47 LayerDrawingOrder50=48 LayerDrawingOrder51=49 LayerDrawingOrder52=50 LayerDrawingOrder53=51 LayerDrawingOrder54=52 LayerDrawingOrder55=53 LayerDrawingOrder56=54 LayerDrawingOrder57=55 LayerDrawingOrder58=56 LayerDrawingOrder59=57 LayerDrawingOrder60=58 LayerDrawingOrder61=59 LayerDrawingOrder62=60 LayerDrawingOrder63=61 LayerDrawingOrder64=62 LayerDrawingOrder65=63 LayerDrawingOrder66=64 LayerDrawingOrder67=65 LayerDrawingOrder68=66 LayerDrawingOrder69=67 LayerDrawingOrder70=68 LayerDrawingOrder71=69 LayerDrawingOrder72=70 LayerDrawingOrder73=71 LayerDrawingOrder74=72 LayerDrawingOrder75=73 LayerDrawingOrder76=79 LayerDrawingOrder77=76 LayerDrawingOrder78=76 LayerDrawingOrder79=76 LayerDrawingOrder80=76 LayerDrawingOrder81=76 LayerDrawingOrder82=76
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
