The key question is always latency.
Maybe the problems Lynn refers to is more due to very high jitter.
In my experience fairly high latency *can* be used - if the jitter is low. It
will not make you feel like being directly on the rig and you may have to adapt
your operating style.
But high jit
Don
My experience is that the biggest problem would be jitter. Oli is correct that
you can operate RC over a 128 kbps link. But you can also operate RC over
fairly high latency links - it wont give you a "smooth" feeling when tuning
across the band- the VFO dial will seem to be connected via a r
If you want to save the 300$ you can operate remotely from laptop, iPad or
iPhone using a surplus windows machine (I'm using a cheap notebook) and all
free software. I have done that for over ten years now with K2 or K3 using
KPA/KAT500 and keying with a pair of Winkeyers. Check my QRZ page if i
Terry
My advice is that you try several of the free logging programs for some time
and then decide which one you like the best. You can see from the answers that
not one logging program fits all. It very much is a matter of taste. It should
be very easy to move your log from any one logging syst
Nice for u, but why did u post it on Elecraft site?
OZ4UN
> On 22 Feb 2016, at 16:56, Paul VanOveren wrote:
>
> My contacts with S Sandwich and S. Georgia in ARRL LOTW this morning...did
> not think this was going to happen til the Fall, but they are there. # 343
> and 344 for me...
>
> NF8J
>
Hi Ted
You can hear quite strong echoes on low bands (maybe up to about 5MHz as far as
I remember). Signals follow earth magnetic field - bouncing back when they
reach the southern hemisphere - and the delay therefore depends on your
magnetic latitude (distance from the magnetic pole). It is qu
I agree it might be useful. Although is rarely happens here - most days it does
not happen at all - but once in a while it does happen repeatedly.
When it happens I think it is due to some kind of occasional interference on
the 2,4 GHz WiFi.
However, it is very interesting that whenever my KPA-
Yes Don,
I for one thought I had a dead USB/serial converter until I realized that I had
it connected backwards (K2 end to KAT100 and KAT100 end to K2)!
It does not harm anything, but the PC will not connect.
/OZ4UN
-Oprindelig meddelelse-
Fra: Elecraft [mailto:elecraft-boun...@mailman.q
Bill
I'd say Oliver is right. The basic K3 is so good that you will not really
notice the difference for your use. You wont even have any problem if you start
chase difficult DX. You will never have to give up copying a rare CW DX station
even in difficult situations just because you didnt have
...@selectconnect.net>> wrote:
What remote solution do you use for CW?
Joe
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Poul Erik
Karlshøj (PKA)
Sent: Friday, May 29, 2015 11:53 AM
To: jlbates4
Cc: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
It all depends on what you want to achieve.
There are many different reasons for hams to want to operate RC. Different
requirements probably call for different solutions.
If you want to operate your home rig (or for that matter a real remote rig)
when you are not at home, eg. when travelling, i
I am having some problems with connecting HRD in Server/Client mode for remote
control of my K3.
Please contact me off-list if you have experience and may be able to help me.
73 de Paul
OZ4UN
__
Elecraft mailing list
Home: http://mailman.
thinking about remoting radio and whether there might be a dual
> use for this "Jam Blaster".
>
> Richard Hill
> nu6t
>
>> On 3/2/2015 4:01 AM, Poul Erik Karlshøj (PKA) wrote:
>> Richard
>> If you operate CW you also must consider that there will be a contr
Jim you are not correct.
73de OZ4UN
Remote CW since 2005
Sendt fra min iPhone
> Den 02/03/2015 kl. 13.12 skrev Jim Brown :
>
>> On Mon,3/2/2015 4:01 AM, Poul Erik Karlshøj (PKA) wrote:
>> If you operate CW you also must consider that there will be a contribution
>> to
Richard
If you operate CW you also must consider that there will be a contribution to
the overall latency from the buffering in the key system. When you use two K1EL
Winkeyers connected over IP you have additional latency because the local
winkeyer is decided before the character is sent over IP
When switching OFF the K3 remotely, you need to send the PS0 command before you
switch OFF the PSU. To switch ON again you need first switch ON your PSU and
then and then briefly ground pin 8 of the ACC. However with some devices with
relay control via GSM/SMS (which is what I am using) you can
Does this mean that your KAT is placed between the K3 and the KPA?
OZ4UN
Sendt fra min iPhone
> Den 14/02/2015 kl. 18.49 skrev Jeff Hall, W6UX :
>
> by directly connecting the K3 to the KPA500.
__
Elecraft mailing list
Home: http://mailm
I Can recommend the Elecraft sw for control of both KPA and KAT. Using it via
Teamviewer and HRD (both available as freeware) You Can easily control the
entire combo ( K3, KPA and KAT) from Remote PC. Really no need for expensive
external boxes.
Right now I am doing just that from EA8.
73 de O
his situation).
>
> 73, Phil W7OX
>
>> On 12/31/14 3:50 AM, Poul Erik Karlshøj (PKA) wrote:
>> Be aware that for warranty work in Italy you will have to pay shipping both
>> forth and back.
>>
>> 73, Paul OZ4UN
>> Sendt fra min iPad
>>
&g
Be aware that for warranty work in Italy you will have to pay shipping both
forth and back.
73, Paul OZ4UN
Sendt fra min iPad
> Den 30/12/2014 kl. 22.54 skrev "Phil Wheeler" :
>
> I thought there was a way to have such warranty work done in Italy.
>
> 73, Phil W7OX
>
>> On 12/30/14 1:18 PM, S
Great combo. Operated 80m for 30 hours with a high duty cycle. KPA temp
stabilized at 50C with low level fan going ON and OFF. Smooth and very
satisfying!
/oz4un
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
John
You can send the PS0 command from HRD:
Macros>Display>CAT Comands ( PS0).
You will hear that the K3 audio stops and you can then switch OFF the K3 by
briefly shorting ACC pin 8 to ground.
I use GSM SMS to do that (and subsequently to switch OFF the PSU). An IP power
switch may be simpler, bu
This would happen if pin-8 of the ACC connector is shorted when you hit the
power button. The same thing happens when you send the PS0 command.
73/OZ4UN
> Den 05/10/2014 kl. 02.37 skrev "Michael James Hauan" :
>
> Anyone have any ideas why, when I hit the power button to turn off my K3, it
> do
> Den 25/09/2014 kl. 22.17 skrev "Jim Brown" :
>
>> On Thu,9/25/2014 10:45 AM, Poul Erik Karlshøj (PKA) wrote:
>> For warranty repair, shipping costs are higher for non US customers than for
>> US customers first of all because Elecraft only pays the shipping bot
arlo is much cheaper, and faster, in most circumstances than
> shipping to the U.S.
>
> 73,
> Eric
> elecraft.com
>
>> On 9/24/2014 10:24 AM, Poul Erik Karlshøj (PKA) wrote:
>> Hi Johnny
>> Yes I know. I built the K2/100, K3/100, KPA500 and KAT500 all from k
Elecraft associated repair service in Italy).
And that is not providing equal service to all customers. That’s my only point.
73 and thanks for your mail.
/OZ4UN Poul-Erik
Fra: Johnny Siu [mailto:vr2...@yahoo.com.hk]
Sendt: 24. september 2014 16:58
Til: Poul Erik Karlshøj (PKA); Gary McKelvie
Cc
Hi Gary
I have done that with my K2, K3 and KPA/KAT500.
However you should take into account (I did not) that for any repair (including
warranty repair) you will have to pay for the shipping both ways when not being
in the US. Shipping the KPA is not exactly cheap. I happen to know for a fact
:
Could someone please write a Macro that does that?
73/OZ4UN
> Den 16/09/2014 kl. 13.58 skrev "Charles Tropp via Elecraft"
> :
>
> On the Configuration Menu go to CW WGHT SSB-CW. Tapping the 1 key toggles
> between SSB+CW, which allows CW to be sent when in SSB Mode and SSB-CW, which
> doesn't.
And mine...
OZ4UN
Sendt fra min iPhone
> Den 18/08/2014 kl. 04.08 skrev "Dave Jones" :
>
> And mine too. :-(
>
> Dave Jones
> VK4FD
>
> zen...@netspace.net.au wrote on 08/18/2014 07:21 AM:
>> My VFO B knob cracked within 6 months of assembly. It was replaced
>> immediately under warranty and
Dr Faber
My experience though 7 years of Remote operating (CW) is that Teamviewer is
very useful.
You Can make a Remote set up without the K3/0 and RemoteRig at a very low cost.
It may be satisfying your needs. I have a description of my set up on my QRZ
page.
At this very moment QRV with K3 and
For control of the K3-line I don't think jitter and latency of the IP
connection generally is a big problem.
The Elecraft software for remote control of the KPA500 and KAT500 is very
user-friendly.
The difficult part for a CW operator is in producing nice CW and in obtaining a
good quality CW
For a while I have noticed that the KPA output indikations on both THE LEDs and
the LCD display is fluctuating. The highest LED is flickering and the last two
digits of the LCD are also fluctuating (hard to read, but at 500W it varies
about 10W I think). It is the same at any power level from 20
We have found a loose (de-soldered) diode 1N5408 in this factory assembled
KPA500.
The diode shows >10Mohm in one direction and 2-3 Mohm (varying) in the other
direction (DVM)
Where is this diode located (if there are several, then where?), what is its
function and is it replaceable by a skilled
My KPA500 T/R switch failed after two weeks of operation. Can not pinpoint any
reason why it should fail. It was repaired by Elecraft under warranty in Italy
and has now worked 10 weeks with no problem.
I now always check VSWR on K3 and on KPA with KPA in STBY whenever i operate on
a new band a
I have sent a description of my low cost set-up to Bill.
Recently I have added the two-Winkeyer solution so I can operate remotely using
a paddle. I can recommend it.
Write to me off-list if you want the short description.
OZ4UN
Poul-Erik
-Oprindelig meddelelse-
Fra: elecraft-boun...@mai
Andy
I use HRD 5.24 with a few well known things that dont work right. No problem
for my use.
When using iPhone or iPad i use Sserver/K3iNetwork (look for KS7D software).
Paul/OZ4UN
Sendt fra min iPad
> Den 11/03/2014 kl. 23.35 skrev "Andreas Hofmann"
> :
>
> Hi,
>
> I would like to be able to
gt; doesn't seem practical, and still doesn't really solve the problem -
> the difference in speed would have to be huge to make a zero no longer
> than an 'E'!
>
> 73,
>
>~iain / N6ML
>
>
>
> On Sun, Mar 9, 2014 at 5:09 AM, Poul Erik Karlsh
ow if it was the WinKeyer or the cable
> that was causing the problem, but didn't want to have to make a second
> trip in those "frigid" temps :)
>
> 73,
>
>~iain / N6ML
>
>
>
> On Sat, Mar 8, 2014 at 7:01 AM, Poul Erik Karlshøj (PKA)
> wrote
. marts 2014 11:22
Til: Poul Erik Karlshøj (PKA)
Cc: elecraft@mailman.qth.net
Emne: Re: [Elecraft] K3 - WinkeyUSB Keying Issue
What an astonishing idea! I have hesitated to make a remote station because of
the latency problem, but this will encourage me to look further. Do you have a
diagram of your
Jed, I would also suspect the cable (having had some problems with one myself).
Not directly related: I have just tried connecting two winkeyers in
Server/Client mode. It works great. I just came back from a short trip to OX
and worked RC on internet with a 200 msec delay and it worked real nice
Hi Wayne
I also did this and found that rev. 1.63 comes to a solution much faster than
the previous versions - almost instantly - It is a very big improvement. It is
very fast on almost all bands and on both my two antennas (80m loop and a 17m
dipole, both with open feeder).
However on 17m wher
You may say that - I do not share your view.
/Paul
Fra: Ken G Kopp [mailto:kengk...@gmail.com]
Sendt: 24. februar 2014 15:46
Til: Poul Erik Karlshøj (PKA); elecraft@mailman.qth.net
Emne: Re: [Elecraft] K3 Birdie 28004.560 kHz
Quite annoying? Really? Far too much fuss over one tiny spot in a very
After upgrading to MCU 04.83 I have a strong birdie (S6) on 28004.560 kHz.
I think I read about someone having the same, just only a short while after
power ON.
This one is constantly present and is quite annoying.
What is causing it and how may it be removed?
/oz4un
Paul
___
e of the KPA500 to consider. Maybe in practice all of the
> above may have a negligible effect, but I somehow doubt it.
>
> 73 Stephen G4SJP
>
>
>> On 23 February 2014 12:58, Poul Erik Karlshøj (PKA) wrote:
>>
>> KAT 01.58 is working nicely. But still, if Y
KAT 01.58 is working nicely. But still, if Your antennas are changing impedance
as the WX changes (which I can confirm is the case when antennas are mounted in
or very close to trees :-) You are going to hear these sometimes lengthy
clickety-clack. Even when making two configurations (one for dr
I just installed KPA rev.1.38 and don't see any difference from 1.37. Both work
very well here (with K3 4.83 and KAT 1.58). I will report if I find anything
not working as expected.
KAT 1.58 removed a software bug in the KAT which meant that the KAT did not
output anything on 28MHz when the KPA
Be aware that You operate CW on the K3 and KX3 using an app called K3iNetwork
made by Mike KS7D. I have used it extensively over the last 18 months. Right
now actually using it from EA8 :-) Mike is working on another app which uses
the touch screen as a touch paddle. It still not working too wel
Please be aware, if you are from outside the US, when sending Elecraft
equipment for repair *including warranty repair* you will have to pay for the
return shipping.
For European hams, Elecraft is offering the option to have faulty equipment
repaired by a partner in Italy.
However, unlike your
Despite whatever DX I have ever heard or worked, my WOW moment was when I for
the first time heard clear, distinct echoes with a delay of 240 milliseconds
(corresponding to almost two times round the world) on 80 meter with just 100W
and a wire loop antenna. It turned out that the 80m signal esc
Me too Rick!
Have used RC CW for 7 years with a Winkeyer as the only "investment"
But as you say it: there are many ways to do RC
I have a few additions though:
1) I operate exclusively CW (mostly ragchew type) and use a Winkeyer and WKDemo
software. Works great - normally no latency issue at all
Yes it does (band switching works both from K3 and KPA)
-Oprindelig meddelelse-
Fra: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]
På vegne af Cady, Fred
Sendt: 6. december 2013 16:21
Til: 'David Withers'; Poul Erik Karlshøj (PKA)
Cc:
Just had a problem on the KPA+KAT setup while working on 80m last night. It
worked without any problems until that moment, so I'm confident something
really did change.
I have contacted Elecraft support, but it occurs to me that someone in this
forum might have had a similar experience and may k
Hi all
Elecraft repair and warranty policy is literally clear:
Elecraft will pay shipping to return the repaired equipment to you by UPS
ground service or equivalent to the continental USA and Canada. Alaska, Hawaii
and outside U.S. and Canada actual return shipping cost paid by owner.
This is u
I am using HRD 5.24 and remote access (using Teamviewer).
It works well enough for my use (100% CW)
For me, the problem with a few buttons is just an annoyance.
But there are other shortcomings in old HRD versions. I don't know if they
apply to the most recent versions.
1. Keying a Winkeyer is
Hi Daniel
That's an interesting solution too and cheaper than the WiFi units.
Do you know what would be the range using a Lenovo notebook (the adaptor should
be OK for 100m according to the spec., but I don't know about the notebook)?
73/OZ4UN
Poul-Erik
-Oprindelig meddelelse-
Fra: elecra
I am considering to place the KAT-500 outdoor near the antenna like Knut AB2TC
has done (and reported to this group).
Having looked on the internet for RS-232 to WiFi adapters I can find them in
the price range from as low as 40 USD to as much as 350 USD.
I wasn't aware of the variety!
I wonder i
You can achieve perfect audio for CW if you use IP-Sound in stead of Skype.
Skype works but the audio quality is not very good for CW.
You may need to use VPN for IP-Sound. I use Hamachi which is easily installed
and set-up.
The audio quality for CW is comparable to being directly connected to th
For remote operation of my K3 the following query:
Will HRD Remote Server (HRD v.5.24.0.36) work on WIN7 computer ?
73 de OZ4UN
Poul-Erik
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
I am using the PowerMate with HRD (HRD running on WIN7 laptop with HRD5 in the
shack, PowerMate on remote WIN7 PC connected via Teamviewer). It works.
However after playing with it I have gone back using scroll arrows and/or mouse
wheel.
73 de OZ4UN
Poul-Erik
-Oprindelig meddelelse-
Fra:
Andy there is a Zener diode (BZW50-15) protection.
I have not been bold enough to actually testing it :-)
Download the schematics
http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf
and look for (use Search function) for D28 .
73/OZ4UN
-Oprindelig meddelelse-
Fra: elecraft-boun...@ma
K3 ser. No 03674
MCU 4.39
Utility 1.2.12.28
I recently had to make a new TX gain calibration. Apparently it was only 80m
where the K3 every now and then displayed "High Current" and reduced the
transmit power. Even when setting power to a low value (e.g. 25W) then the very
first CW character
There are probably many different type of applications of remote control of a
ham station.
Basically I distinguish between
1) control of a truly remote station (with better antennas than what you can
get at the operators site)
2) control of your home station when you are away from home.
Why dis
Hi Nick
I just saw your demo video and found it very interesting. I am wondering what
is in the pigtail box, and whether what you are asking for is what interest
there is in such a unit.
It is quite interesting since it would make remote control of your K3 not
depending on a PC or laptop in th
In the KPA100 Manual there is a warning not to use standard RS-232 cables
between the K2 SIO and a PC (only pins 2, 3 and 5 are normally connected)
Would it not be a similar problem using a serial to USB adapter?
Poul-Erik
OZ4UN
-Oprindelig meddelelse-
Fra: elecraft-boun...@mailman.qth.ne
It is interesting to see a whole new type of remote control of K3 (and other
radios?) develop.
I have now for 3 months been playing with the iK3network and an iPhone 4
connected either on 3G networks or on WiFi hot spots and regularly work QSOs
on CW with up to 24 wpm.
The app still has a few b
mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]
På vegne af Mike KS7D
Sendt: 28. oktober 2011 21:42
Til: Poul Erik Karlshøj (PKA)
Cc:
Emne: Re: [Elecraft] Remote Control of K3 with iPhone/iDevice
I was looking at the More Controls user interface and there is room to add LSB
and USB buttons. I can
an.qth.net [mailto:elecraft-boun...@mailman.qth.net]
På vegne af Mike KS7D
Sendt: 28. oktober 2011 00:57
Til: Poul Erik Karlshøj (PKA)
Cc:
Emne: Re: [Elecraft] Remote Control of K3 with iPhone/iDevice
Thank you Poul. I am happy to hear you find the program useful. I didn't add
USB or LSB butt
Hi Mike
Just having had my first experience with K3/iPhone - and I am thrilled! Had my
first CW QSO with it - at speed 20 wpm which is at the limit of my typing
capabilities on the small iPhone screen (a mix of letters and numbers as we
have in our calls is particularly cumbersome on the iPhone
.
The question remains whether this is specific to my K3 or to something else
locally.
Poul-Erik OZ4UN
-Oprindelig meddelelse-
Fra: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]
På vegne af Jack Smith
Sendt: 27. oktober 2011 15:00
Til: Poul Erik Karlshøj (PK
I have been measuring the level of harmonic spurious from my K3 #3674 and came
up with some interesting results.
I measured with the K3 connected to a dummy load and to my antennas (loop for
80-40-30 and 17m dipole for higher bands, both antennas fed by 450 ohm feeder
and Elecraft 4:1 baluns).
[mailto:guyk...@gmail.com] På vegne af Guy Olinger K2AV
Sendt: 26. maj 2011 19:32
Til: Poul Erik Karlshøj (PKA)
Cc: David Cutter; drewko; Elecraft@mailman.qth.net
Emne: Re: [Elecraft] K3 antenna tuner question
Having a lot of water around means that the antenna impedance changes with the
power level. I have
I don't think the problem is due to good tunes being misses by antenna being
"hit", because when it happens, it is very reproductive, i.e. you can repeat
the ATU tuning and it will always come back to the non-optimum LC combination.
Paul
OZ4UN
-Oprindelig meddelelse-
Fra: elecraft-boun..
Another thing about the K3 ATU is, that it sometimes stops at an LC combination
which is NOT identical to the LC combination giving the lowest SWR. If that
happens you can manually change the L or C to obtain the lowest SWR - but it is
a bit cumbersome - and not what you expect from an automatic
SPAM mail?
-Oprindelig meddelelse-
Fra: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]
På vegne af Alan Price
Sendt: 13. maj 2011 03:55
Til: Elecraft
Emne: [Elecraft] Let me build you a new K2 or other Elecraft kit
I have built more than 265 K2's to date. Th
t: 23. april 2011 20:23
Til: elecraft@mailman.qth.net
Emne: Re: [Elecraft] key dot weight
Poul Erik Karlshøj (PKA) wrote:
>
> Thanks Don and others for referring me to the CW bandwidth mod (wave
> shape mod).
> It shows the fine waveform of the K2. Mine is ser. 4662 and has that mod.
&
[mailto:w3...@embarqmail.com]
Sendt: 20. april 2011 18:08
Til: Poul Erik Karlshøj (PKA)
Cc: d...@w3fpr.com; elecraft
Emne: Re: [Elecraft] key dot weight
Just go to the Elecraft website www.elecraft.com and on the left column,
click on Manuals and Downloads, Then select K2 - on the list that opens
meddelelse-
Fra: Don Wilhelm [mailto:w3...@embarqmail.com]
Sendt: 20. april 2011 14:12
Til: Poul Erik Karlshøj (PKA)
Cc: elecraft
Emne: Re: [Elecraft] key dot weight
Paul,
I suggest you compare your keying waveshape to that shown in the K2 Keying
Waveshape Mod instructions. If yours
I have raised the problem of keying weight on the K2 several times earlier -
but I never got an answer.
So I'll try again.
The dot weight ratio on my K2 is unable to reach 50% on my K2. Even with weight
set to 90% (0,90) the weight is too heavy. Fortunately a somewhat higher weight
sounds bette
The K3 ATU is not always stopping at the optimum LC combination.
However, it does not stop too far off. In some cases (rainy weather) I have
noticed that it stops at SWR=1,4 even when there is an LC combination giving
SWR=1,0.
I don't see it as a big problem. But it is annoying when using remote
There are many possible solutions for RC today.
What I describe here has one specific advantage: it is very cheap to implement.
I am using HRD. My preferred opr mode is CW so I had to buy a winkeyer.
I use Logmein.com for remote access to the shack. Since my IP address is
dynamic, I am using DynD
I think there is a good chance of observing Long Delayed Echoes on 80m these
days.
I noticed very strong echoes yesterday 6 Jan 2011 at around 19:50 UTC (approx.
5 hrs after local sunset) on 3523 kHz but just a couple of times during a 5
minute period. I think I switched ON too late and missed
Hi
I have the same problem, but with a twist to it. I even got Elecraft to send me
a replacement KAT3, but it did not help anything.
By chance I tried one of the older configurations (call it config B) and then
all of a sudden the ATU worked excellent (able to tune a 80m loop and a 17m
dipole
Wonder if anyone else has seen this odd K3 behaviour and may be able to help me
solving the following problem.
K3 with ATU and KPA
K3 loaded with most recent firmware (MCU 4.12, FPF 1.13, DSP1 2.60).
I have repeated the firmware download a couple of times, but it did not solve
the problem descr
Wonder if anyone else has seen this odd K3 behaviour and may be able to help me
solving the following problem.
K3 with ATU and KPA
K3 loaded with most recent firmware (MCU 4.12, FPF 1.13, DSP1 2.60).
I have repeated the firmware download a couple of times, but it did not solve
the problem descr
My K2 internal keyer can not achieve a correct weight (50% duty cycle of dots).
The minimum setting of 90 is still too heavy, except for at low speeds, where
its acceptable.
Anyone else having observed this, or is this just my K2?
I am using external keyers (CMOS Super keyer and Winkeyer) for my
What are the correct settings of the K3 and of N1MM for keying (CW) the K3 from
N1MM?
Sorry if this has been answered in the past - if so pse just a link.
Poul-Erik, OZ4UN
-Oprindelig meddelelse-
Fra: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]
På vegne af
I am unable to get a proper dot/space ratio with my K2 (#4662) internal keyer.
With the lowest possible setting of "0,9" the dots are still much too long. The
internal key is OK for QRS, but not for QRQ.
Wonder if this is a general feature?
73/OZ4UN
___
Just to close this subject maybe.
In addition to the chirp I found on my K3 on 3526 kHz I was told by others
(Bruce N1LN) that they had found chirp on 14030.5 kHz. Bruce cured it by adding
a resistor+capacitor to the Synth Board and load a specific f/w file and Bruce
praises the support from El
This is only interesting for users of CW on the K3.
You might want to check and see if your K3 - like mine #3674 with 3.68 firmware
- produces a badly chirping signal when the VFO is set to a frequency in a very
narrow range of 3525.970 to 3526.030 kHz while the rcvr is using 400 Hz x-tal
filte
89 matches
Mail list logo