On Mon, 6/24/13, Sebastian Kuzminsky s...@highlab.com wrote:
If Gregg's goal is to install LinuxCNC from the 2.5 LiveCD
onto a
machine that isn't connected to the internet, and then
upgrade LinuxCNC
to the latest version, then do this:
Download the latest release deb from here:
Just trying to run LinuxCNC to have a look at it and it won't even run. I also
tried the latency test and nothing at all happens, *nothing*, not even an error
message. Just got done with a fresh install off the 2.5 disk then updated to
2.5.2. I first tried one of the simulation setups, then
Open a terminal and type dmesg to see what went wrong.
On 2013/06/25 09:01 AM, Gregg Eshelman wrote:
Just trying to run LinuxCNC to have a look at it and it won't even run. I
also tried the latency test and nothing at all happens, *nothing*, not even
an error message. Just got done with a
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_until_2050/
On 06/24/2013 01:13 PM, Gene Heskett wrote:
On Monday 24 June 2013 13:59:47 Stuart Stevenson did opine:
wonders never cease
I just saw a link
On 25 June 2013 08:01, Gregg Eshelman g_ala...@yahoo.com wrote:
I get this same fail to run every time.
I think that the problem might be here:
[0.00] Local APIC disabled by BIOS -- you can enable it with lapic
[0.00] APIC: disable apic facility
On Tue, Jun 25, 2013 at 4:18 AM, Charles Steinkuehler
char...@steinkuehler.net wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Besides my 3D printing endeavors, I am involved with trying to get a
hackerspace going here in Topeka. Recently a CNC mill that might make
a good LinuxCNC
On Tuesday 25 June 2013 04:08:40 MC Cason did opine:
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_until_
2050/
That is one of the articles that prompted my tirade.
First off, its nowhere near rad
The error is in your log:
[ 216.183331] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT
AVAILABLE/ENABLED.
and a good description (including a fix) can be found here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?TroubleShooting#emc2_doesn_t_run_missing_lapic
Regards,
Alex
- Original Message
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
On Tue, Jun 25, 2013 at 2:21 AM, Gregg Eshelman g_ala...@yahoo.com wrote:
Perfect... if I hadn't forgotten the password to the computer. D'oh! Oh
well, just boot off the disk and nuke-n-pave with a fresh install and this
time choose a password I know I won't forget... password. When it's all
That is likely a good candidate for a conversion.
I'd grab it now! Make an appt.. take some cash.
That should fit onto a tandem axle car trailer as it is probably about
5000 lbs.
Scrap iron is going for a little over $200/ton in Indiana so $500 is
about scrap price.
On those deals, if
On 6/25/2013 3:23 AM, MC Cason wrote:
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_until_2050/
On 06/24/2013 01:13 PM, Gene Heskett wrote:
On Monday 24 June 2013 13:59:47 Stuart Stevenson did
Looks very much like the DahLih here. This should be a very nice candidate.
The asking price does not even cover the tool holders.
A simple simple retrofit.
Get it and have fun.
It will certainly have some provision for tool change other than a step
ladder. I suspect the twist knob with the shiny
Mark,
They have been on there for quite some time. Think of it as there
way of sponsoring us to do what we like best :-)
I was googling around yesterday, trying to fix a assertion error that
glabels was throwing, and ran across a MS advert, that claimed it could
FIX the assertion
On Tue, Jun 25, 2013 at 11:59 AM, MC Cason farmerboy1...@yahoo.com wrote:
Mark,
They have been on there for quite some time. Think of it as there
way of sponsoring us to do what we like best :-)
I was googling around yesterday, trying to fix a assertion error that
glabels was
On Tuesday 25 June 2013 12:33:29 Mark Wendt did opine:
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
Charles Steinkuehler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Besides my 3D printing endeavors, I am involved with trying to get a
hackerspace going here in Topeka. Recently a CNC mill that might make
a good LinuxCNC retrofit candidate popped up on the local craigslist:
On Tuesday 25 June 2013 13:41:58 Dave did opine:
On 6/25/2013 3:23 AM, MC Cason wrote:
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_unti
l_2050/
On 06/24/2013 01:13 PM, Gene Heskett wrote:
On Tue, Jun 25, 2013 at 4:28 AM, Gene Heskett ghesk...@wdtv.com wrote:
Any control computer in a nuke facility really should be rad hard, so that
it can continue to function right up to within a millisecond of being a
glow in the dark crater in the ground. Those PDP-11's aren't.
I don't know
On Mon, 24 Jun 2013, sam sokolik wrote:
Date: Mon, 24 Jun 2013 22:09:11 -0500
From: sam sokolik sa...@empirescreen.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
Notice the comment
Starting bid is $500
CL usually popoos those.
On Tue, Jun 25, 2013 at 1:30 PM, Jon Elson el...@pico-systems.com wrote:
Charles Steinkuehler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Besides my 3D printing endeavors, I am involved with trying to get a
On Tue, 6/25/13, Gene Heskett ghesk...@wdtv.com wrote:
And some are surprised that Nuke plants have problems
periodically!
Dave
Yes, and with all the NRC mandated paperwork, folks don't understand it
costs them 10 grand in legal fees just to replace a faucet washer or flush
valve
On 06/24/2013 10:18 PM, Charles Steinkuehler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Besides my 3D printing endeavors, I am involved with trying to get a
hackerspace going here in Topeka. Recently a CNC mill that might make
a good LinuxCNC retrofit candidate popped up on the
On Tue, 2013-06-25 at 18:48 -0500, Karl Schmidt wrote:
On 06/24/2013 10:18 PM, Charles Steinkuehler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Besides my 3D printing endeavors, I am involved with trying to get a
hackerspace going here in Topeka. Recently a CNC mill that might
Honestly if the machine is not too far away your best bet is to call your
local rollback wrecker companies. They routinely make in town moves of
large equipment that they can just drag up onto the flatbed and away you
go. That is how I moved my Cincinatti Arrow 500 into my shop. Hell he could
even
On 26 June 2013 02:45, Pete Matos petefro...@gmail.com wrote:
I moved a 4500 lb large lathe with myself and my wife
and a come a long on some 1 diameter black iron pipe pretty easily.
The last few machines that my Dad and I have moved we haven't even
bothered with rollers, just dragged them
Andy,
Agreed, and the less height and the less you have to maneuver the beast
the better off you are gonna be that much is clear. If you have a slab that
is nice and level and smooth you can probably do that pretty easy. If he
has the rollback move the machine to his shop and then gets it
I forgot to post these.. (Thanks dad!)
http://www.electronicsam.com/images/KandT/Fest2013/
random pictures from the fest. I hope to organize them in the future.
sam
On 06/25/2013 03:38 PM, Peter C. Wallace wrote:
On Mon, 24 Jun 2013, sam sokolik wrote:
Date: Mon, 24 Jun 2013 22:09:11 -0500
Sam,
Thanks for posting the pictures for us poor bastards who were not able
to attend. How about a who's who description so we can tell from the
pictures who we are looking at. I only could make out two nameplates in all
those pictures LOLpeace
Pete
On Tue, Jun 25, 2013 at 10:31 PM,
I need help to get me started on this.
The winch is to drop and raise a chandelier for the local high school doing
Phantom of the opera, I am building the chandelier and would like to build the
winch also.
The chandelier I'm guessing will weight 200 pound and the winch can be 120 volts
I would
On Tue, Jun 25, 2013 at 7:00 PM, Gregg Eshelman g_ala...@yahoo.com wrote:
Pointless, petty, regulatory BS like that, which has zero bearing on the safe
operation of the facility is why the control rooms of nuclear power plants
still look like they're 30 to 40 years old - because they are 30
On Tuesday 25 June 2013 23:28:15 Pete Matos did opine:
Sam,
Thanks for posting the pictures for us poor bastards who were not
able to attend. How about a who's who description so we can tell from
the pictures who we are looking at. I only could make out two
nameplates in all those
On Mon, 24 Jun 2013 10:42:06 -0500
Stuart Stevenson stus...@gmail.com wrote:
My first reaction is how could this be necessary?
Are they not wanting/able to capture a file to feed to the control?
I am having trouble imagining a computer so small or a program so
large as to need drip feed.
Priority number one needs to be safety. Lifting 200 lbs is not
a big deal. Lifting 200 lbs when people might be underneath
is a very big deal. If something breaks and it drops 16 to
25 feet it could kill somebody.
Maybe you already know all this stuff - in that case,
please don't be offended.
34 matches
Mail list logo