Hi,
Has anyone tried ATI Radeon 9800Pro with 64bit AMD Opteron? I saw the
AMD64 RC1 is out now, but there was no mention. I want to setup a
high-powered GNU/Linux graphics workstation.
Tips appreciated
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.
on the 27/05/03 19:25, James Sparenberg wrote:
On Tue, 2003-05-27 at 05:03, J. Grant wrote:
Hi James,
> JG when you then attempt (after issuing the command in runlevel 1) to
> telinit to runlevel 5 does it complain about / being read only?
5 is reboot right? yeah, it complains, can
Well, its "Desktop Access" , find that and set a short cut key, its on
the "Special Button" menu.
Gambatte!
JG
on the 12/04/03 02:25, bascule wrote:
i'm looking for a way to achieve the above, does any one know the command that
is run by the 'show desktop' icon? unlike the other icons on the p
Hi List,
I setup connection sharing in the mdk control centre. However my ppp
conection (via kppp) now does not work. I can connect but all programs
give either "Connection refused" or DNS errors. /etc/resolve.conf has
the correct IP addresses in it. And so does my laptop which I also
tested wi
on the lilo prompt try:
linux single
or
linux init=/bin/sh
one of those should work
Cheers
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
could try the other usb kernel module if you are using uhci etc, try
lsmod to see which you are using.
See kernel HOWTO and modules config if you are unsure how to procede.
Cheers
JG
on the 04/04/03 21:34, Ronald J. Hall wrote:
I posted this message (similiar) twice to the newbie list and got
Did you try the version at http://macromedia.rediris.es/site_ri.html ?
This works fine for me with mozilla 1.3
If this is really bug, why not email macromedia about it? they list an
email address for contact
http://www.macromedia.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlas
Hi Vincent and others,
Thanks for the help so far.
After rpm -ivh kernel-2.4.21-0.13mdk I have found even though I am not
booting it, my system is not stable. in X/KDE the whole system has
crashed twice today when loading ~30MB text files. Which never happend
before. I can not ssh in to reb
"dar" can make split archives, so can "zip"
write a script to do that, then burn the 2 isos.
or buy a dvd-r and avoid the issue :)
JG
on the 22/03/03 21:25, Gonzalo Avaria wrote:
Hi experts,
i would like to make a simple question, but i've been looking everywhere for
the answer.
I would like
Hi James,
Thanks for the reply.
on the 22/03/03 18:53, James Sparenberg wrote:
On Sat, 2003-03-22 at 06:29, J. Grant wrote:
I installed with rpm -Uvh, it still wiped out my other kernel in
lilo.conf and /boot
the -U is why... don't upgrade kernels install them with -i this will
put every
I installed with rpm -Uvh, it still wiped out my other kernel in
lilo.conf and /boot
eg
image=/boot/vmlinuz
label=linux-2.4.19mdk
root=/dev/hde2
initrd=/boot/initrd.img
append="devfs=mount hdc=ide-scsi"
vga=788
read-only
but in /boot
vmlinuz -> vmlin
Hi Rob
on the 22/03/03 06:25, Rob Blomquist wrote:
I was able to solve my PS2 mouse/CD burning problem by shifting the
mouse to USB.
But here's the catch. I was unable to use mousedrake to configure it.
It kept complaining that "no usb bus found\n at /usr/sbin/mousedrake
line 54." Bull, I type
I've installed the rpm now. What I am really surprised about is that it
wipes out the old ones config. So if there had been a problem my
computer would not have booted. Is there a reason for this mdksoft?
Cheers
JG
I had to add this at the end again just incase there was a problem.
image=/
Hi James,
The 9.1 kernel may or may not run as is on your box... The odds are
better than 50 50 HOWEVER I've heard of a number of people who have
built the 9.1 kernel on 9.0 without a problem. I would recommend doing
just this.. get the source build the kernel.
Ok, getting this now, thank
Hi Jack,
rpmfind.net has difficulty indexing Mandrake's RPMs -- try searching for
"kernel-2.4" instead of "kernel".
Thanks for tip. However, 2.4.19 is the newest i can find on rpmfind still.
Cheers
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi,
I have been searching for a newer kernel on:
ftp://ftp.dkuug.dk/pub/mandrake/updates/9.0/RPMS
ftp://ftp.sunet.se/pub/Linux/distributions/mandrake/updates/9.0/RPMS
rpmfind.net
However, I can not find a 2.4.20 rpm. Are there rpms for mdk anywhere
on the net?
I found the cooker ISO's:
ftp://
Sounds like you want cp -dpr, info cp gives you more details.
cheers
JH
on the 19/03/03 12:28, Christopher Joseph wrote:
First apologies. I have had some problems getting the search function on
the mail archives to function properly this morning so I have not been
able to trawl for past questi
Hi,
I was tempted by the lure of a digital video recorder.
I found this http://www.geocities.com/slothmud/VCR-HOWTO-3.html
It seems great, my tv card is working fine with xawtv, so i checked vcr
out. However, there are so many deps, I cant even get the avifile src
on this site to build, (seems
I have a computer with only 128MB ram, it chuggs along very slowly in X
Windows. in fstab there is a /tmp tempfs ramdisk, I commented it out so
that it now uses the root /tmp. However, performace is still about the
same, odd considering there should be about 64MB of ram extra available.
Any i
You probably need to do this on the directory level to get those new
files or add the recursive switch.
I tried with cvs diff -uNr but that did not work either, the N was
removed i showed from the patch.
Another way is to check out a
pristine copy alongside your version the run a recursive patc
Hi,
I have a different problem, I'm just hijacking james's thread though :)
I have been unable to get "cvs diff -uN" to work, the -N flag should
include new files in the patch. I can not add files to the local
repository with "cvs add" which I believe I should be able to. I do not
have a cvs
Is it SCSI then? I thogught it was IDE
I have:
hde: WDC WD800BB-00CAA1, ATA DISK drive
Works ok, as long as I set it as udma2 in the bios, have you done this?
have you checked its got the right jumper settings?
Cheers
JG
on the 05/03/03 22:07, Andreas Weiss wrote:
hi,
the installation of ML9.
I use netstat -ntl
JG
on the 05/03/03 23:46, Simon Prosser wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 05 Mar 2003 11:34 pm, Jim C wrote:
I remember asking this question a couple of months ago but I can't
remember the answer, or find the email, to save my life.
What is a sim
Hi Keith,
Using HTTPS is much more secure than sending via post. I am also in the
UK, I have never been the victim of online fraud. However before the
net revolution some one did charge my CC and it was refunded. All
online CC have a garentee against fraud just like anything else.
MDK could
Hi,
I am not a samba expert, but could it be as simlpe as smbmount mounts
read-only by default. My /etc/fstab entries for my samba shares have rw set
in the options. I recall having to explicitly set this after install.
something like this should work.
//ps2/now3d /home/now3d/ps2 smbfs users,
Have you tried running it in gdb ? then doing what ever you do to make
it SIGSEGV
I've found div-by-zero and other bugs this way.
Cheers
JG
on the 02/03/03 15:23, Ronald J. Hall wrote:
On Sunday 02 March 2003 08:46 am, Greg Meyer wrote:
If you are the one with the different drivers, try and is
Hi Civilme,
Thanks for the reply.
well first of all, if you can split ide drives to one per channel, that would
be more efficient. ONly one device per channel on IDE may be active, and two
disks on the same channel really slows down disk-to-disk operations
ok, I will give this a go soon.
Nex
hi
Jack Coates wrote:
A UK-specific distro is kinda scary, I'm imagining all this Austin
Powers theming going on :-) And of course it would have to use the
Slackware .tgz packaging system, just to be anachronistically different
than the EU...
heh, and we all still wear bowler hats and pin strip
I'm in UK.
As for a UK distro... I once heard of something called Eridani
Starsystems .. I think. Was more of a redistribution of Red Hat with
some of the latest software. And I never used it.
ah, checked their website, they are using RH6.2 as their base. I think
i'll give it a miss, supporting
Praedor Atrebates wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 25 February 2003 08:32 am, J. Grant wrote:
Hi,
Sounds good, is it going to be in France then? or the UK? or somewhere
in Europe?
I vote for a place that all members can agree upon...Downtown Baghdad.
Heh, well if
Hi,
Sounds good, is it going to be in France then? or the UK? or somewhere
in Europe?
Cheers
JG
tarvid wrote:
it is time to plan 9.1 release parties
i propose part celebration part installfest
we are planning to have a local mirror and a half dozen KVM stations for
installs and a cd (maybe
Hi Rob,
Basically installing these rpms from plf will work with your existing
xine, with no extra config required!
xine_dmd_plugin-1.0.7-1plf
win32-codecs-1.0-1plf
libdvdcss2-1.2.3-1plf
libdvdcss-ogle0-0.0.3-9plf
xine-d5d-0.2.7-2plf
xine_d4d_plugin-0.3.2-2plf
xine-win32-0.9.13-8plf
I also have t
with the veto files token not working
correctly.
David.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of J. Grant
Sent: 10 February 2003 15:53
To: [EMAIL PROTECTED]
Subject: Re: [expert] Samba hide "." prefixed dirs?
Hi,
If you mean you don't wa
Hi,
Thanks for the reply vox.
Vox wrote:
This time Anne Wilson <[EMAIL PROTECTED]>
becomes daring and writes:
On Monday 10 Feb 2003 3:52 pm, J. Grant wrote:
Hi,
> If you mean you don't want them seen on the windows box, it's the show
> hidden files setting in windows
Hi guys,
Thanks for the sugestions.
JOHAM,DAVID (HP-Boise,ex1) wrote:
Try this:
rpm2cpio > newfile.cpio
cpio -ivd < newfile.cpio
That should get you going...
Cool, thanks that worked. compiled rpm does not seem to require a .spec
file, the src had it though, so i know the ./configure line n
Hi,
Does anyone know how to exract a .spec file from a compiled rpm?
I tried using cpio and some other stuff, but cant get it. rpm --rebuild
sss.src.rpm is meant to put it in the SPECS dir, but it isnt there
either. Also there is one in the tgz of the soft, but thats generated
for a different
Hi,
Thanks for the quick replies drjung, civilme, rolf and sridhar.
> Jus wondering, have up updated ur bios.
Just wondering, are you using WD harddrives?
drjung
I was wondering the same thing. I am aware that Andre Hedrick has campaigned
for a while to keep WDs off of udma3 or higher bec
Hi,
Thanks for the info.
I did download the propreitary hpt370 kernel module, but it was only
binary and I could not get the root disk to work. Perhaps I should try
a newer kernel than 2.4.19-16mdk, have you tried with the default mdk9
kernel on your board at all?
I have the latest bios for my
Hi,
I've got one Abit KT7 RAID MB system running stock mdk9 kernel. Its running, however, the hd speed is slow because it only works with no dma etc. I am using the correct ata100 cables with only a single drive on each channel.
Has anyone else experienced this with this motherboard using the ra
Hi,
Todd Lyons wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Praedor Atrebates wrote on Thu, Feb 20, 2003 at 01:48:15PM -0500 :
whatsoever, no beeps, no messages. Logs are totally devoid of any
information on the 2.4.19-24 kernel. It is absolutely, totally, without
doubt a dead, lif
If there is a jumper on the disk to reduce the size, try that (for
testing), this might eliminate the possiblity that the drive is faulty.
Although it works in win2k, have you done a surface scan there?
It really does sound like its the kernel thats the problem though, you
could search google
Hi,
"[root@mycom root]# e2fsck -f -c /dev/hda2
e2fsck 1.26 (3-Feb-2002)
/dev/hda2 is mounted.
WARNING!!! Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.
Do you really want to continue (y/n)? yes
You did not remount your /dev/hda2 read-only, then you said yes when it
e2fsck -f -c /dev/hdX can do it for you now, make sure you are in
single user mode though and your HD is mounted ro.
I already reinstalled ML9.0, but I tried on this new install
"e2fsck -f -c /dev/hda2": and it returned a bunch of errors. And this
is after a fresh install. I'll complain about
hi vatbier,
vatbier wrote:
civileme <[EMAIL PROTECTED]> wrote:
The X66 is safe to use as you have described it. What is dangerous is
overdriving.
hdparm -k1 -d1 -X66 /dev/hda (66:UDMA2)
I guess you mean if I change the hard drive setting with
DataLifeGuard and then do "hdparm -d1 X69"
I don't know why you have quotes, but anyway, is the output of "locale"
any different?
you could edit your ~.i18n file, that ":en" seems uncessary too
check /etc/sysconfig/i18n too, might be something there.
Unless this is because you "su" instead of "su -" (using a real login as
root)?
Cheer
Hi,
If you mean you don't want them seen on the windows box, it's the show hidden
files setting in windows explorer.
I did think there was an smb.conf option as well as this explorer option.
I'm sure I saw it before, now when I need it I can't find it!
Cheers
JG
Want to buy your Pack or
Hi,
Its a trivial question, but i cant find the answer, could someone tell
me how to hide "." prefixed dirs in samba please?
I remember seeing an option in "smb.conf" but I can see it in the mdk9
version.
Regards
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mand
Hi,
The Require is for AN myspell-dictionary not specifically en_CA.
That 1 happens to be the 1 installed by default because it is the 1st
listed en dictionary.
Had you installed a second myspell-dictionary you would have received no
error when you ran rpm -e myspell-en_GB
OK, I just tested.
Hi Gwenole,
Gwenole Beauchesne wrote:
On Mon, 6 Jan 2003, J. Grant wrote:
Could deps be created so that the dictionarys are installed and then
configured automatically? This would save time for all users.
Deps already exist. Global configuration is already performed. i.e.
updates to
KDE has some configure options for this. However, i have the same
problem as you. kde scale 0-10 i think it was anything more than 1 was
too quick. and it goes up in steps of 1 ! i've emailed them, but no reply
JG
Robert Goshko wrote:
On Thu, 2003-01-09 at 13:55, Joan Tur wrote:
-BEGIN PG
UK is PAL-M right?
JG
Lorne wrote:
Make sure you have the right frequency table set. I think it may default to
us-cable. There are like 11 different choices. Long shot here. :)
On Wednesday 08 January 2003 10:11 am, Roger Munoz wrote:
Hi
I've have installed a hauppauge wintv card on my mandr
IE exported charsets have not been a problem for me.
make sure your fonts are installed in X etc.
Btw, sugest your translator uses mozilla/composer in ms-windows, then at
least your html files you get from him will be clean.
I sugest you use UTF-8 for all your html files.
Regards
JG
Jason G
Gwenole Beauchesne wrote:
On Mon, 6 Jan 2003, J. Grant wrote:
The dictionarys for OO are not in the mdk distribution. Is there a
reason for this? They should be installed for all the locales selected
during the install process I beleive.
Dictionaries for OOo are in the MDK distribution. Look at
Hi,
The dictionarys for OO are not in the mdk distribution. Is there a
reason for this? They should be installed for all the locales selected
during the install process I beleive.
Currently I have to setup OOodi to download and install english
dictionarys, North american english is the only di
=)
Cheers
Jason
J. Grant wrote:
Well have you got the usb modules loaded? And i assume there are other
working usb devicies? you do not mention if your mouse is listed.
If not get the lastest libusb recompile the latest kernel too.
JG
Jason wrote:
Ok, I am still having problems so I hope s
Hi,
2.0.3 kazaalite crashed like this for me, but 1.72 kazaalite works fine,
i downloaded a default registry, ran the installer, got some windows
shared libs and it worked.
http://appdb.winehq.com/appview.php?appId=747
http://www.drd.dyndns.org/index2.html
http://www.christian-gerner.de/comput
Well have you got the usb modules loaded? And i assume there are other
working usb devicies? you do not mention if your mouse is listed.
If not get the lastest libusb recompile the latest kernel too.
JG
Jason wrote:
Ok, I am still having problems so I hope someone can help me out here. I
had
example, anyone who fully adheres to the IP RFC's subnet mask guidelines
needs to have their head examined.
Jack
On Thu, 2002-12-26 at 17:51, J. Grant wrote:
is it really broken? The reply-to should not be changed/added by the
list. It is the mdk config problem I believe.
JG
Jack Coate
2.27 €, but they are selling for 2.2 to us :)
anyway i emailed them, they replied asking for my name, that was the
last I have heard. perhaps the amount I wanted was not enough, but then
asking users for support is never going to generate 300K €.
JG
Mcleod, Ian wrote:
What are the Mandrake sha
is it really broken? The reply-to should not be changed/added by the
list. It is the mdk config problem I believe.
JG
Jack Coates wrote:
Argh, another broken reply-to... (yes, I know it's RFC-compliant to do
this... it's also RFC-compliant to have a non-contiguous IPv4 subnet
mask and you don't
Hi Vincent,
And I thank you for that, James. The issue at this instant in time, if
we could freeze on today, is not new users; it's existing users that
aren't doing their part (freeloaders if you will). Mandrake Linux is
perhaps one of the most popular Linux distributions out there, but you'
No one has mentioned the share option yet, I'm taking this up, its less
than market value and you might even get your money back.
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi,
It is working currently, after changing the module to es1968
specifically in mdk control centre (which updated /etc/modules.conf)
David Bowie is playing a reasonable speed again :)
JG
J. Grant wrote:
Hi,
I am having problems getting perminant sound out of my laptop the spec
is as follows
Hi,
It is working currently, after changing the module to es1968
specifically in mdk control centre (which updated /etc/modules.conf)
David Bowie is playing a reasonable speed again :)
JG
J. Grant wrote:
Hi,
I am having problems getting perminant sound out of my laptop the spec
is as follows
Hi,
I am having problems getting perminant sound out of my laptop the spec
is as follows:
Laptop Adagio (38W2) Same as DELL Inspiron 7500 Purchased June 2001
ESS Technology ES1978 Maestro 2E (rev 10)
maestro: Configuring ESS Maestro 2E found at IO 0x1400 IRQ 7
maestro: subvendor id: 0x001114c0
there is a pdf on linuxsecurity.com that lists all this and more
Praedor Atrebates wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 19 December 2002 01:09 pm, [EMAIL PROTECTED] wrote:
"man /etc/hosts.allow" should give you everything you need
Err...all that does is display
Response (Jason) - 12/17/2002 11:56 AM
> Our ATA is fully in compliance with set standards. Many users including
> corporations use our drives in their systems and servers. Please
> understand that we cannot provide you with technical support for the
> install of Linux in any wa
mounted by root at startup
Regards
JG
Dave Sherman wrote:
On Tue, 2002-12-17 at 07:44, J. Grant wrote:
Hi,
Thanks for the reply.
after making it suid root it still said "you need to be root to unmount"
perhaps there is something else stopping it working that we don't know.
Hi,
What is the WD email support address please? their site is terrible
Regqards
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi,
Thanks for the reply.
after making it suid root it still said "you need to be root to unmount"
perhaps there is something else stopping it working that we don't know.
Strange how it works in redhat.
Regards
JG
Dave Sherman wrote:
On Mon, 2002-12-16 at 21:35, J. Grant w
Hi Dave,
I am surprised that works, here chmod +s only gives user and group +s
so my normal user can still not run it.
Any other ideas? I could use a script, but there must be something more
elegant
Regards
JG
Dave Sherman wrote:
On Sun, 2002-12-15 at 12:07, J. Grant wrote:
Hi,
I'm s
Hi,
Here's a common joke, How do you bring a computer to its knees? Put a WD
drive in it! as they don't follow the standards or support their drives
under free software OS's.
This is why you dont want WD, email them and tell them this as well.
I've got an 80GB drive running about twice as fast
Hi,
So these programs are good now? limeware was poor last time i tried, and
the gnutella was nearly as bad. I got Kazaa 1.72 working, 2.02 would
not work. I start it like this "wine --dll shlwapi,shfolder,shdocvw=n
zazaa.exe" if that is useful for anyone.
JG
Todd Franklin wrote:
Please take
Hi,
I have not got it working yet, here are the URL's I'm reading, it seems
posible.
JG
http://www.christian-gerner.de/computer/linux/kazaa.htm
http://appdb.winehq.com/appview.php?appId=747
SainTiss wrote:
Hi,
actually, I don't get that working either... installed it, replaced the
.exe, and
Hi,
I downloaded kazaa for linux a few weeks ago. needed to install an old
ncurses to get it to run, but it is not ever connecting. Support seems
to be missing from the kazaa.com site as well now. Has anyone got this
working? or found a better working p2p network client for GNU/linux?
Regards
Hi,
I'm seeing some strange effects, this has been going on for a while, but
i've not got around to asking if there is a solution, basically, even
though I have "user" in my fstab I can only unmount my cdrom as root.
Any ideas or solutions?
Regards
JG
$ umount /mnt/cdrom
umount: only root c
Hi,
I have this working now.
However I'm considering buying a PPC PowerBook. Do DivX plugins work
with PPC if they are using wine? Or does anyone know if there are native
versions?
Regards
JG
Steffen Barszus wrote:
On Tuesday 03 December 2002 23:16, J. Grant wrote:
Hi,
Although
about:plugins in mozilla will tell u all u need
JG
Jack Coates wrote:
On Fri, 2002-12-13 at 05:00, Felix Miata wrote:
# rpm -qa | grep ava
#
OK, what's the secret code to find out what java version is installed?
--
"If you are wise, your wisdom will reward you. . . ." Proverbs 9:12 NIV
Team
Myabe define 2 different layouts, thats the way i do it on my laptop
(still not tested on mdk9)
This should work, providing both of your mice at working separatly.
The "SendCoreEvents" will mean you have "interference" eg on a laptop
knocking the touch pad will mean your cursor might get moved
have you used drakeprofile to change the setup?
JG
Jones,Daniel E. wrote:
I am trying to set up my Linux KDE system to accept input of Hangul
(Korean) characters.
The motivation is to have a separate account for my Korean-born wife.
Since I do not read Korean very well, my account has to con
Hi,
Well I have it working now, i just click on the d5d button on the GUI,
DVD button still does not work, i guess thats just the inbuilt code etc.
thanks for the info
JG
Steffen Barszus wrote:
input_dvd: Sorry, this plugin doesn't play encrypted DVDs. The legal status
of CSS decryp
Hi,
I have it working using xine-d5d now, so i just click on the d5d button
instead of the DVD one to play dvds.
Regards
JG
Steffen Barszus wrote:
input_dvd: Sorry, this plugin doesn't play encrypted DVDs. The legal status
of CSS decryption is unclear and we can't provide such code.
Hi,
Thanks for the reply.
Steffen Barszus wrote:
On Tuesday 03 December 2002 23:16, J. Grant wrote:
Add contrib to your sources: Output here :
# urpmi xine-dvdnav
Um die Abhängigkeiten zu erfüllen, werden die folgenden Pakete installiert (0
MB):
libdvdnav1-0.1.3-1mdk.i586
xine-dvdnav
Hi,
Although mdk9 includes xine, I still have to install the encrypted dvd
decoder. I had this working in 8.1 but it is not going well atm.
As xine is installed already I added the following:
libdvdread2-devel-0.9.3-2mdk
libdvdcss2-1.2.3-1plf
libdvdread2-0.9.3-2mdk
libdvdread-utils-0.9.3-2mdk
I
Perhaps you should (if you did not already) make clean; make dep; in
your kernel dir (with new sym link to /usr/src/linux) before compiling
the nvidia src's
JG
Jorris Graad wrote:
I've installed NVdriver successfully on mandrake's origin kernel. I used the tar.gz files.
Then I compiled the new
Just use smoothwall.org its great, even if the developers are cocky and
not arogant :)
JG
Jim C wrote:
Why not suggest it? Surely they must have a means of getting input from
thier users and if they don't have a suggestion box perhaps they should
get one.
Want to buy your Pack or Services f
Why not use cups? perhaps your config has defaulted to another paper
size than A4 for some reason.
JG
Jim C wrote:
I also have a printin problem. An issue I've been trying to cope with
since I got my first Linux distro. Every time I try to print it prints
to high on the page. I loose enough
Hi,
Is there a way to split tar.gz archives in this way? I would like to
find an eqivelent of winrar so i can split backups into 730,000,000 byte
files.
Regards
JG
Alan Wilter Sousa da Silva wrote:
Hi, read about -L option in 'man tar'. So you can create several files
(<2Gb).
I hope that's h
Hi,
I'm looking for the ideal web cam supported by mdk9.0.
I checked the mdk hardware db
http://www.linux-mandrake.com/en/hardware.php3
but it does not seem to have a section for web cams. (would not let me
search the whole catagory too for some reason)
Could anyone recommend a good one, I a
Hi everyone,
I have changed all my locale, kde and email settings to UTF-8 as I do
some internationalisation work. However there are some things that still
do not work quite correctly. man pages and KWrite corrupts sometimes.
gcc − GNU project C and C++ compiler
SYNOPSIS
gcc [�c│�S│�E]
Is the crossover site with all its docs and FAQs down?
JG
villoing wrote:
Hello!
I have two problems resulting from the installation of the crossover
plugin.
1) I've installede crossover as root and the windows plugins only run if
I launch mozilla as root. How can cahnge that to be able to u
Hi,
Todd Lyons wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sebastien Routier wrote on Thu, Nov 21, 2002 at 04:45:08PM -0500 :
I am curious as well about your reason(s), but I can see three things
that could annoy me:
- It is not scriptable.
- It requires a GUI on the UNIX side either
just ssh in and shutdown, cygwin has both, or u could install one of the
hundreads of trojans that have this feature for windows :)
JG
ps its not polite eticate to have such a large signature
Tony S. Sykes wrote:
Hi all,
Does anybody know how to shut a w2k box down remotely from MDK9.0 (needs
run the realplayer thu a proxy configured to only use http port 80, nab
the url and download it with wget
JG
Aristotle wrote:
Anyone know how to save Real Audio streams to disk?
On Sun, 2002-11-17 at 16:33, Marek wrote:
Hi
Has anyone got RealOne to work on Mandrake Release 9 ? I t
Is it not possible to just ssh login? I've recovered from most X probs
with this, then execute reboot as r00t and your away.
JG
Brandon Long wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I get this too, but only internittently, maybe one out of 20 shutdowns the
shutdown process will han
try this too
Option "DPMS" "off"
or APM off in XF86Config-4
man XF86Config for more info
JG
. wrote:
use chkconfig to keep /etc/init.d/apmd from running at boot up. Turn
off all your power management in the BIOS too.
Franki wrote:
Hi guys,
I think I have isolated the problem when I u
Why not just look in the linux kernel config?
JG
aginies wrote:
The ide raid controler is Promise 20276 and it seems it does not work
under Linux.
try to look here:
http://www.gigabyte.co.jp/support/d_other.htm
its seems that there is beta driver and utlity for promise 20276.
Want to buy
well if you were using the commandline format tool you could have just
pressed ctrl+c right up until 99% or so, as its just checking the drive.
Other than that, put it in another MS PC and hope for the best, u might
have to buy some software to recover it
JG
Brian Schroeder wrote:
I think I kn
micq.org is using the same protocol as AOL but wthi icq, it is console
based. Perhaps you could use this instead
JG
Barry Michels wrote:
> I'd like to send an IM from PHP whenever someone leaves a message in
my site.
> The only thing I've found is naim, but I haven't been able to get it to
> com
micq.org is using the same protocol as AOL but wthi icq, it is console
based. Perhaps you could use this instead
JG
Barry Michels wrote:
I'd like to send an IM from PHP whenever someone leaves a message in my site.
The only thing I've found is naim, but I haven't been able to get it to
compil
1 - 100 of 253 matches
Mail list logo