/usr/ports/www/linux-flashplugin9
in linux-opera or linux-firefox with linux_base-fc6, but the latter will
only be available with upcoming FreeBSD 7.0 branch.
yes the linux-opera is the only one actually working with flash.
but if it is multiuser machine i strongly recommend not to use it.
from fwip manual
---
The fwip driver provides standard IP over FireWire (IEEE 1394) based
on
the protocols described in RFC 2734 and RFC 3146.
The firewire(4) and fwohci(4) drivers must be configured in the
kernel as
well.
This driver supports polling(
On Mon, Aug 27, 2007 at 09:00:11PM +, Scott I. Remick wrote:
> I think I must be the only one using FreeBSD who wants to listen to
> podcasts. :)
Nop, we're two ;-)
Take a look into GoldenPod. there is not a port for this one yet,
but it should be pretty straight forward to install it.
If you want to post a question you need to start a new thread instead
of erasing the content of mine and replacing with your question.
This is not how we behave on this mailing list.
So what did you have to say about configuring Open Sound System? I am
all ears.
Sincerely,
Predrag Punosevac
Can i install db2 express edition on FreeBSD ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I have a 6.1 machine (AMD X2-5200) that reboots itself from time to time for
no apparent reason. Today, I caught it in a reboot and on the console it
said it was shutting down the CPU's, like someone had hit control-alt-delete
on it (the same message)... But there is no keyboard attached to it, and
The mail server is stripping attachments so you would have to send them
as a part of message.
You can NOT send attachment to freebsd lists.
[EMAIL PROTECTED] wrote:
I've read a lot of FreeBSD bridging and DSL router articles, but I
still can't get PPPoE running.
Topology:mycomp---ed0-Fr
I've read a lot of FreeBSD bridging and DSL router articles, but I still can't
get PPPoE running.
Topology:mycomp---ed0-FreeBSD-rl0---ADSL_modem---Internet
Attached are some of the config and log files from the FreeBSD box. Currenly NAT
settings are off. With these settings, in ppp interac
Thanks. We are getting somewhere:-)
None of the pen drives are recognized. The pen has an msdos file system.
ugen* is not created when I insert the device although ugen is listed and
enabled in the generic kernel config.
Thanks.
Michael.
On 8/28/07, Predrag Punosevac <[EMAIL PROTECTED]> wrote:
Hi list,
First forgive me if this is not the ideal list for this thread, and
please redirect me to the good one.
After this discussion[1] I did spend some time in order to improve the
script provided by Maxim Khitrov, and here is the result :
- show all knobs supported by ports not yet installed
It uses an ICH7 southbridge.
Any ideas?
On 8/28/07, Predrag Punosevac <[EMAIL PROTECTED] > wrote:
>
> You find the specification of your mother board and the south bridge
> chip set should be listed. Should be included in computer documentation
> or go to web site of Compaq and check. That is one
As far as I know, ESC-. (in fact hitting '.' when in command mode)
repeats your very last action whether it was an editing action or
executing a command.
yes, that's true for vi, but not for /bin/sh in vi-mode. at least
on my 6.2-RELEASE.
;)
___
fre
What does configuring the modem in bridging mode means?
==
=ppp.conf=
==
default:
set device PPPoE:
Hi,
The network card that came with the PC (Broadcom NetXtreme Gigabit
Ethernet) was not recognized by sysinstall. So I bought a real tek based
card that works fine. But when I run dmesg, I get lots of these lines
(almost 900):
rl0: discard oversize frame (ether type 0 flags 3 len 1532 > max
On Tuesday 28 August 2007, Predrag Punosevac wrote:
> Michael Hauber wrote:
> > On Thursday 16 August 2007 11:06:47 am Reid Linnemann proclaimed:
> >> Written by Dan Sikorsky on 08/16/07 09:40>>
> >>
> >>> Is this guide OK?
> >>> even if i dont have an nvidia chipset?
> >>> http://www.bsdforums.org
Hi Amer,
Could you send an "ifconfig -a" ?
It may occur if your MTU doesn't match
Amer H. Alhabsi a écrit :
Hi,
The network card that came with the PC (Broadcom NetXtreme Gigabit
Ethernet) was not recognized by sysinstall. So I bought a real tek
based card that works fine. But when I run dm
On Tuesday 28 August 2007 13:48, [EMAIL PROTECTED] wrote:
> What does configuring the modem in bridging mode means?
>
> ==
> =ppp.conf=
> =
Hi list,
I'm trying to resolve a strange problem on my DNS resolver system for some
time now, and still have no clue where to catch the reason. Perhaps
someone here has some hints for me...
The prerequisites:
DNS Server with FreeBSD 6.2-RELEASE-p4 running bind as resolver (hardware
sufficient,
Hi there!
Is there an utility which can work as usual tcpdump but with process
information option?
(or something like continually running `sockstat -46` or `fstat | grep
internet` or `lsof -i4 -i6` ...etc)
i.e. i wanna see which process generate network traffic to trace out
some suspicious act
On Mon, 27 Aug 2007 23:53:37 +0200, Nikola Lecic wrote:
> Does any of these programs look good enough?
Actually I had already looked into those before I posted. Neither castget
nor podcatcher support any retention settings like the other software I
listed. Castpodder hasn't seen development in
Hey,
We have a problem here at the office that I'd like to solve with pf
and source-based routing.
How would I write a rule with pf to route any traffic from 10.1.1.1
across a specific interface?
Thanks!
-
Eric F Crist
Secure Computing Networks
_
Hi, try ettercap. < http://ettercap.sourceforge.net/>
-IS
---
Fraunhofer IGD
Department Cognitive Computing & Medical Imaging
Ilias Sachpazidis phone:+49/(0)/6151/155 507
Fraunhoferstr. 5 fax :+49/(0)/6151/155 480
D-64283 Darmstadt [EMAIL PROT
i have a DC7100, a very similar machine (same southbridge, i believe). none
of my USB worked worth a damn until late 6.1. 6.2 has been totally reliable.
during 6.1, updating my BIOS upgraded my situation from "not worth a damn"
to "hit and miss".
broadcom nic also works fine in later versions
Ilias Sachpazidis пишет:
Hi, try ettercap. < http://ettercap.sourceforge.net/>
-IS
---
Fraunhofer IGD
Department Cognitive Computing & Medical Imaging
Ilias Sachpazidis phone:+49/(0)/6151/155 507
Fraunhoferstr. 5 fax :+49/(0)/6151/155 480
D-6
On Tue, Aug 28, 2007 at 07:18:07PM +0400, Edward wrote:
> Ilias Sachpazidis пишет:
>> Hi, try ettercap. < http://ettercap.sourceforge.net/>
>>
>> -IS
>>
>> ---
>> Fraunhofer IGD
>> Department Cognitive Computing & Medical Imaging
>>
>> Ilias Sachpazid
We are Leather/Hides and skin producing company looking for a representative
to represent the company. We have sales representatives all over the world to
distribute our products.You know, that it's not easy to start a business in a
new market (being the US). There are hundreds of competitors
Dear all,
Please bear with me one more time. In two months I will need to set up a
home network and I was planning to use a spare freebsd box as a gateway,
proxy (squid) and content filtering (dansguardian). I am basically ready
but the more I think about it, the more worried I am.
That is - fo
On Tue, 28 Aug 2007, Zbigniew Szalbot wrote:
Dear all,
Please bear with me one more time. In two months I will need to set up a
home network and I was planning to use a spare freebsd box as a gateway,
proxy (squid) and content filtering (dansguardian). I am basically ready
but the more I think
I have a 6.1 machine (AMD X2-5200) that reboots itself from time to time for
no apparent reason. Today, I caught it in a reboot and on the console it
said it was shutting down the CPU's, like someone had hit control-alt-delete
on it (the same message)... But there is no keyboard attached to it, and
Hi,
On Tue, 28 Aug 2007 18:01:02 +0200 (CEST), "P.U.Kruppa"
<[EMAIL PROTECTED]> wrote:
>> do not need. My question is more general, though, I would simply like to
>> know if there's any simple way to put the box behind a router and sitll
> be
>> able to do transparent proxying of requests origina
Hello
I've compiled and installed c-icap, clamav and squid, in order to
configure a HTTP proxy with antivirus support.
I am able to start c-icap process, but srv_clamav.so module is not loaded:
Here is a log from c-icap (when I run it with "/usr/local/bin/c-icap -N
-D -d 10"):
-
After running make index && make readmes (as root) after cvsupping my
ports tree, I get this error message:
/usr/ports/Tools/make_readmes: Permission denied
*** Error code 126
Stop in /usr/ports.
This is a FreeBSD 6.2-STABLE machine.
What's happening here?
>> I'm unable to find any reference to amd64 on Firefox FAQ and other
>> info sources. I have an EVGA mobo with an AMD64 running FreeBSD 6.2
>> perfectly, with Firefox. But every attempt at a plugin complains
>> either that it isn't windows or that it's an amd64. I really want to
>> run Flash ma
I wasn't able to reproduce what you explained...maybe I missed something?
Bahman
On 8/28/07, [EMAIL PROTECTED]@mgedv.net <[EMAIL PROTECTED]> wrote:
>
> > As far as I know, ESC-. (in fact hitting '.' when in command mode)
> > repeats your very last action whether it was an editing action or
> > ex
I have an HP dv6000 series notebook with a wireless network device
which worked under windows. The notebook had windows when I obtained
it. I installed FreeBSD 6.2 and upgraded to -stable.
I cannot configure the wireless network or do anything with it. This
may be between my ears or it may be a
Did you check on the hardware compatibility list if the wi chipset is
supported and with what driver? Did you check on
the laptop compatibility list what was report on your laptop. If the
device can work people probably left documentation
how was done.
It is very possible that particular WI de
I just installed FBSD 6.2, but I have a requirement to use some
precompiled binaries from FreeBSD 4.11. They are failing because
libm.so.2 is not available. Is there a compatibility package that I can
install which will give me the older libraries? I do not have the
source code to recompile
On Tue, Aug 28, 2007 at 12:50:34PM -0700, Jon Drukman wrote:
> I just installed FBSD 6.2, but I have a requirement to use some precompiled
> binaries from FreeBSD 4.11. They are failing because libm.so.2 is not
> available. Is there a compatibility package that I can install which will
> give
On Tue, 28 Aug 2007 at 12:50 -0700, [EMAIL PROTECTED] confabulated:
I just installed FBSD 6.2, but I have a requirement to use some precompiled
binaries from FreeBSD 4.11. They are failing because libm.so.2 is not
available. Is there a compatibility package that I can install which will
give
Hello list,
I upgraded couple ports during the past days,
and after that mousepad core dumps.
However, it works fine if i run it as root.
I don't remember which caused the problem, because i haven't used mousepad
in about 3-4 days.
Any ideas?
I'm running 6.2-RELEASE i386, latest xfce.
Thanks.
I just installed FBSD 6.2, but I have a requirement to use some precompiled
binaries from FreeBSD 4.11. They are failing because libm.so.2 is not
available. Is there a compatibility package that I can install which will
give me the older libraries? I do not have the source code to recompile
the
On 8/28/07, Duane Hill <[EMAIL PROTECTED]> wrote:
>
> Have you tried the compat4 port:
>
>/usr/ports/misc/compat4x
thanks! that got me past one error, now i'm stuck on libcrypt.so.2
is there a port for libcrypt compat? (i didn't find anything obvious by
searching on *compat* or *crypt*)
-
On Tue, Aug 28, 2007 at 01:41:34PM -0700, Jon Drukman wrote:
> On 8/28/07, Duane Hill <[EMAIL PROTECTED]> wrote:
> >
> > Have you tried the compat4 port:
> >
> >/usr/ports/misc/compat4x
>
>
> thanks! that got me past one error, now i'm stuck on libcrypt.so.2
>
> is there a port for libcrypt
Have you tried linking libm.so to libm.so.2?
tomdean
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On 8/28/07, Kris Kennaway <[EMAIL PROTECTED]> wrote:
>
> > > Have you tried the compat4 port:
> > >/usr/ports/misc/compat4x
> >
> > thanks! that got me past one error, now i'm stuck on libcrypt.so.2
> >
> > is there a port for libcrypt compat? (i didn't find anything obvious by
> > searching
On Tue, Aug 28, 2007 at 02:23:42PM -0700, Jon Drukman wrote:
> On 8/28/07, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> >
> > > > Have you tried the compat4 port:
> > > >/usr/ports/misc/compat4x
> > >
> > > thanks! that got me past one error, now i'm stuck on libcrypt.so.2
> > >
> > > is there a
On Tue, Aug 28, 2007 at 01:52:51PM -0700, Thomas D. Dean wrote:
> Have you tried linking libm.so to libm.so.2?
Sorry, but that's really bogus advice.
Kris
--
In God we Trust -- all others must submit an X.509 certificate.
-- Charles Forsythe <[EMAIL PROTECTED]>
__
On 8/28/07, Kris Kennaway <[EMAIL PROTECTED]> wrote:
>
> On Tue, Aug 28, 2007 at 01:52:51PM -0700, Thomas D. Dean wrote:
> > Have you tried linking libm.so to libm.so.2?
>
> Sorry, but that's really bogus advice.
>
> Kris
It would work for MacGuyver or the A-Team...
__
On Tue, Aug 28, 2007 at 02:23:42PM -0700, Jon Drukman wrote:
> On 8/28/07, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> >
> > > > Have you tried the compat4 port:
> > > >/usr/ports/misc/compat4x
> > >
> > > thanks! that got me past one error, now i'm stuck on libcrypt.so.2
> > >
> > > is there a
On Tue, Aug 28, 2007 at 03:13:04PM -0700, Jeff Mohler wrote:
> On 8/28/07, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> >
> > On Tue, Aug 28, 2007 at 01:52:51PM -0700, Thomas D. Dean wrote:
> > > Have you tried linking libm.so to libm.so.2?
> >
> > Sorry, but that's really bogus advice.
> >
> > Kris
It provides a temporary solution in some cases, when you need to get
going. It is not a long term solution.
tomdean
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
On Tue, Aug 28, 2007 at 03:31:25PM -0700, Thomas D. Dean wrote:
> It provides a temporary solution in some cases, when you need to get
> going. It is not a long term solution.
It's bogus because a) the real solution exists and is trivial (install
the relevant compat port), and b) your advice *wil
Hi all,
I stumbled on this while trying to track down an mbuf leak on a new server.
It seems that routed corrupts the arp table on FreeBSD 6.2 when
there are more than one ip alias on an interface. The behaviour differs
depending on whether routed is enable in rc.d or manually started after
boot.
Quoting Don O'Neil:
> I have a 6.1 machine (AMD X2-5200) that reboots itself from time to time for
> no apparent reason. Today, I caught it in a reboot and on the console it
> said it was shutting down the CPU's, like someone had hit control-alt-delete
> on it (the same message)... But there is no
On Tuesday 28 August 2007 17:35:55 Kris Kennaway wrote:
> On Tue, Aug 28, 2007 at 03:31:25PM -0700, Thomas D. Dean wrote:
> > It provides a temporary solution in some cases, when you need to get
> > going. It is not a long term solution.
>
> It's bogus because a) the real solution exists and is tr
Hello,
On Tue, 28 Aug 2007 05:04:34 +1000 (EST)
Ilya Nix <[EMAIL PROTECTED]> wrote:
> Hi. I purchased a laptop with nVIDIA GeForce 8400 and very want to
> install FreeBSD, but X11 cant start up
You probably haven't installed x11/nvidia-driver. According to the
documentation of 100.14.11 driver
Im on 6.2R
and I have the same problem, Server rebooting it self As with your
situation, there are no
apparent patterns.
I changed the power supply (It was already new) I added fans, I changed
RAMS,
but always same issues, server rebooting with no known issues!!
the problem that..its SERVER.
On Mon, 27 Aug 2007 23:30:48 -0700
Gary Kline <[EMAIL PROTECTED]> wrote:
> Does anybody know howto set my env to iso.8859-1 (Latin1)
> so that, say [Alt]-i will produce an e-aigu? I think that's
> e-acute. I have it partlyworking in regular xterm. I can
> type the string
>
>
> > > I tried installing 'mbmon' port, but when I run mbmon -d I get:
> > >
> > > mbmon -d
> > > InitMBInfo: Operation not permitted
> > > This program needs "setuid root"!!
> > >
> > > The SUID flag is set, and I'm running it from root. I am wondering if
> >there
> > > is a possible power supply
Philippe Laquet wrote:
Hi Amer,
Could you send an "ifconfig -a" ?
It may occur if your MTU doesn't match
Amer H. Alhabsi a écrit :
Hi,
The network card that came with the PC (Broadcom NetXtreme Gigabit
Ethernet) was not recognized by sysinstall. So I bought a real tek
based card that works
On Tue, Aug 28, 2007 at 08:58:08PM -0500, Jonathan Horne wrote:
> On Tuesday 28 August 2007 17:35:55 Kris Kennaway wrote:
> > On Tue, Aug 28, 2007 at 03:31:25PM -0700, Thomas D. Dean wrote:
> > > It provides a temporary solution in some cases, when you need to get
> > > going. It is not a long ter
Hello... I'm using 6.2-STABLE from Aug 8th. Trying to get a CD ripping
program to work on this new box. Have used Grip in the past, also trying
Sound Juicer but both are having issues... I think it's something to do
with the drive. Here's what I get in /var/log/messages:
Aug 29 00:30:52 desktop
What happens when you try to rip a CD from the command line with let say
burncd program?
Scott I. Remick wrote:
Hello... I'm using 6.2-STABLE from Aug 8th. Trying to get a CD ripping
program to work on this new box. Have used Grip in the past, also trying
Sound Juicer but both are having issu
How about if you read first page from Chapter 18 from the Handbook
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html
There are several rock solid command line programs for burning CDs and
DVDs. Burn cd is the simplest one. cdrecord is the second one.
Forgive m
Predrag Punosevac wrote:
How about if you read first page from Chapter 18 from the Handbook
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html
There are several rock solid command line programs for burning CDs and
DVDs. Burn cd is the simplest one. cdrecord is t
Hello:
I am trying to get a new machine to boot from v6.2 install disc one of
packaged cd set.
The mother Board I am using is MSI RX480 NEO 2 w/AMD64.
At first I got the message usb1:panic: vm_fault on nofault device and
an address
I disabled usb in the bios then rebooted.
next I got the same
66 matches
Mail list logo