Re: [Repeater-Builder] Broken Rock MT. tower collapse

looking at the Pictures YEP an FM went off the air.. Must have been a Non Com based on the Type of antenna I only see 2 bays /

RE: [Repeater-Builder] Broken Rock MT. tower collapse

1-5kW EIRP, it > may be cheaper to lease less tower space and throw on a > slightly hotter > transmitter. > > JS > > > -Original Message- > > From: Repeater-Builder@yahoogroups.com > [mailto:Repeater- > > [EMAIL PROTECTED] On Behalf Of neal Newman > &g

Re: [Repeater-Builder] MOTOROLA R-100 PROGRAMMING CHECKSUM ERROR!

My question on this  I have an R100 Uhf repeater that I want to reprogram.  where do you guys get the software for doing this... I have seen diagrams to Build the cables.. thoughts?  Neal-KA2CAF/WQEN680 --- On Fri, 12/5/08, jim law <[EMAIL PROTECTED]> wrote: From: jim law <[EMAIL PROTECTED]> Sub

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

Don this Link does not work  Neal-ka2caf --- On Mon, 12/8/08, Don Kovalchik - W8DPK wrote: Here is a link to the S-1320A service manual: It's a pretty large file, about 16MB, but it's very high resolution.  I'll leave it on the site

Re: [Repeater-Builder] RC 1000 controller code table

The Old codes were 3 digits like 100 ,101,102,103 the newer versions had 4 digits 4100,4101,4102 Ect.. try that --- On Wed, 12/17/08, wb8art wrote: > From: wb8art > Subject: [Repeater-Builder] RC 1000 controller code table > To: Repeater-Builder@yahoogroups.com > Date: Wednesday, December

Re: [Repeater-Builder] Want: GLB Receiver Pre-selector (please)

Are you sure about that.. I have a 2 meter GLB pream preselctor thats not working.. I even replaced the MRF901 several times still No good. I called GLB to Price a replacement and almost fell off my chair when they told me how Much. If It works I could use a christrmas gift( P.S. Mine di

Re: [Repeater-Builder] Want: GLB Receiver Pre-selector (please)

Yep and they are Over $200 I have called and asked. --- On Fri, 12/19/08, David Struebel wrote: From: David Struebel Subject: Re: [Repeater-Builder] Want: GLB Receiver Pre-selector (please) To: Repeater-Builder@yahoogroups.com Date: Friday, December 19, 2008, 1:20 PM Skipp,   As a personal a

Re: [Repeater-Builder] Six Meter Repeater Noise Issues

Noise on the six meter repeater.  On my  machine 53.67 in New jersey I was getting noise that was holding the machine Keyed up. then drop. and key up again. I thought it was desense Even with a big expensive  Commercial Duplexer. with the transmitter off, the normal unsquelched Hiss sounded Fine

Re: [Repeater-Builder] OT- D

Kevin you have a number where we can Chat? Having an issue with a GE MastrII Base/repeater that was given to me. the 10 volt Regulator. THe radio would receive and Tx with the REM TX button. The jumpers were 1 and 3 and 2 and 4 but when I switched them to 1-3 1 and 2 it stopped working why? T

Re: [Repeater-Builder] GLB Preamplifier - Preamp Device (transistor) Information

skip I opened up My 2 meter GLB preamp preselector. it is an MRF-901. Years ago there was an article in one of the Ham radio handbooks that showed a 4 element UHF preamp/preselector that I built for ATV use. and it too was based on an MRF-901. It worked great. GaSfets I feel have too much gain, a

Re: [Repeater-Builder] Iso-coupler

.    I just delt with an AM station that had an FM translator on it and cell  antennas being Installed. without iso couplers... and the owner wondered why He had Problems with his station... If your wondering I  Build,and maintain AM stations for a living   Neal Newman- KA2CAF/ WQEN680    East

Re: [Repeater-Builder] Woodpeckers, acorns and microwave antennas.

Thats too Funny.. I fell off my Chair wish I had a camera when we opened one up. it was full of Bats. Almost fell off the Tower Neal-ka2caf --- On Sat, 1/31/09, Bryon Jeffers KØBSJ wrote: > From: Bryon Jeffers KØBSJ > Subject: Re: [Repeater-Builder] Woodpeckers, acorns and microwave ant

Re: [Repeater-Builder] OT: Radios and Coms in TV and Movies

Yeah and If you notice. the HT is actually a Kenwood TH-21BT radio This radio with the optional Headset Does in fact have VOX Neal --- On Mon, 2/2/09, MCH wrote: > From: MCH > Subject: Re: [Repeater-Builder] OT: Radios and Coms in TV and Movies > To: Repeater-Builder@yahoogroups.com > Dat

Re: [Repeater-Builder] OT: Radios and Coms in TV and Movies

watch the movie again. some of the Hts were the AT series and had tone pads . Others did not and the antenna was too thick to be the UHF series... My guess is the TH-21AT radios.. I am looking at Mine sitting On the desk Neal > > Sorry-in hindsight they were 41A's, not the AT > versi

Re: [Repeater-Builder] OT: Radios and Coms in TV and Movies

wrote: > From: DCFluX > Subject: Re: [Repeater-Builder] OT: Radios and Coms in TV and Movies > To: Repeater-Builder@yahoogroups.com > Date: Monday, February 2, 2009, 9:17 PM > Blue short antenna, 31 series... > > On Mon, Feb 2, 2009 at 5:48 PM, neal Newman > wrote: &g

Re: [Repeater-Builder] OT: Chicken Stick

Play it safe dude buy a 2 foot piece of either 1/2 or 3/4 inch PVC and an End cap drill a hole in the End cap. Place a 4" long 1/4-20 Bolt through the hole in the cap. Tighten up the bolt with Nuts and washers. Put end cap on End of 2 foot tube place a Length of wire and Clip Onto this Bolt.

Re: [Repeater-Builder] Need Info on - Sigma DX26FB Duplexer

ht be used for in either country, but nothing definative.   Thanks!   - Original Message ----- From: neal Newman To: Repeater-Builder@yahoogroups.com Sent: Wednesday, February 04, 2009 6:13 AM Subject: Re: [Repeater-Builder] Need Info on - Sigma DX26FB Duplexer I had a Flat pack 22

Re: [Repeater-Builder] Need Info on - Sigma DX26FB Duplexer

I had a Flat pack 220 Duplexer.. what your describing is much to small. for 220Mhz its closer to 18 inches long not 4 inches sounds Like you have a 440 or 800 mhz duplexer... But then again what do I know.people are always trying to beat Physics and theory By making smaller packaging

Re: [Repeater-Builder] Need Info on - Sigma DX26FB Duplexer

keep watching EBay.. surely one will turn up :-)     - Original Message - From: neal Newman To: Repeater-Builder@yahoogroups.com Sent: Wednesday, February 04, 2009 6:38 AM Subject: Re: [Repeater-Builder] Need Info on - Sigma DX26FB Duplexer  Interesting. ..  but its for

Re: [Repeater-Builder] Decibel folded dipole

Question is that the Length Before the Element is Bent? or is that already bent measurinf from Tip to tip? --- On Sat, 2/7/09, Chuck Kelsey wrote: > From: Chuck Kelsey > Subject: Re: [Repeater-Builder] Decibel folded dipole > To: Repeater-Builder@yahoogroups.com > Date: Saturday, February 7,

Re: [Repeater-Builder] Micor Repeater

 Hey Ralph is this Repeater going to be located at Star Pass Resorts?  that overlooks the Entire City of Tucson... Nice Place to Vist.. I was out working in Tucson   On New years... The Roadrunners  are Coolsame for the Humming Birds  Neal Ka2caf --- On Sun, 2/15/09, Ralph S. Turk wrote: F

Re: [Repeater-Builder] Good conversion choice for 1st 6 meter repeater?

Hey Joe Im running the same thing a Converted Mitrek on 52.71/53.71 with a hardline Duplexer. ( off air at moment due to loosing duplexer in the house fire. setup worked great. Other machine is a MastrII 3000 watt repeater with Full size Commercial Duplexers.. Both are easy Conversions th

Re: [Repeater-Builder] Good conversion choice for 1st 6 meter repeater?

ble. I don't think we will stay on 53.71, but > it is just an > experiment to see if 6 meters will play at the site with no > other > problems. I don't think we will hear each other, as we > are 130+ miles > apart. > > 73, Joe, K1ike > > neal Newman wro

Re: [Repeater-Builder] Good conversion choice for 1st 6 meter repeater?

esday, February 18, 2009, 7:36 PM > We should be able to hear that 3000 Watt MASTR II repeater > all day, every day! > > -Original Message- > >From: neal Newman > >Sent: Feb 18, 2009 4:18 PM > >To: Repeater-Builder@yahoogroups.com > >Subject: Re: [R

Re: [Repeater-Builder] 53.71Mhz on the air at Waterford, CT

Thats great news Joe.. Now If you link into the N2ROW system You can then Link into My 53.71/52.71 system.in New Jersey and we can have a party. What Duplexers are you using Or are you split site. Ill try to send Pics Of My 52.71 Machine and My 52.67 machine.. Neal KA2CAF/W2CJA

Re: [Repeater-Builder] 53.71Mhz on the air at Waterford, CT

mobile, NHRC-4 controller. Single > site. > > 73, Joe, K1ike > > neal Newman wrote: > > Thats great news Joe.. > > Now If you link into the N2ROW system You can then > Link into My 53.71/52.71 system.in New Jersey and we can > have a party. > > What Duplexers

Re: [Repeater-Builder] Re:GLB preselectors again

Hey guys I have a 2 meter GLB preamp/preselector where the MRF 901 appears to be shot. now the question of the day. which side is the Base of the MRF-901 is it the side with Only 1 helical or does it face the side with the 3 helicals... I think the MRF-901 thsts in there ( which has bee

RE: [Repeater-Builder] GE KEY

 Hey Guys... For those that know that I just rebuilt after a house fire. Im Finally Getting Everything cleaned up and back on the air. This Morning I relized one Minor thing missing... I have My Motorola Key.. but I cannot Find my GE key to open my cabinets  I thought I had one in my Ranger Rig...

RE: [Repeater-Builder] 6 meter mastRII Base

 to the Brain trust Boy its been a busy and crazy 2 years with the house Fire.  Now its Time to rebuild the repeaters that were lost in the fire. thank Gd 2 meters and the 440 were at a comercial site. 220 is on the bench and almost Finished to be put back up.  one of the 6 meter machines. Finishe

Re: [Repeater-Builder] Quieting duplex noise from a tower

Samething here in NJ. the Club put all new Db Antennas On the 100 foot tower. New Feedline. still had the noise...new grounding system. all sections bonded. still Noise. changed the guy cables to Phillystrand. Problem went away --- On Thu, 3/12/09, Chuck Kelsey wrote: > From: Chuck Kelsey

Re: [Repeater-Builder] Quieting duplex noise from a tower

> Chuck > WB2EDV > > > - Original Message - > From: "neal Newman" > To: > Sent: Thursday, March 12, 2009 4:55 PM > Subject: Re: [Repeater-Builder] Quieting duplex noise from > a tower > > > > > > Samething here in NJ. the Club put all new

RE: [Repeater-Builder] 220 Repeater Power Amp

Get Rid of that crap cable your using..  I only use    RG 214, and or superflex for my inter connects  between the repeater, amps in line(power amp/preamps), and the duplexer.  Mosly 1/4" superflex becuase I got lots of it. In a pinch I will use RG-142... Never use that 400 or 9913 garbage.. --

Re: [Repeater-Builder] Re: Quieting duplex noise from a tower

I dont know anything about this particular Tower or how and when it was put up. if its a sleeved tower like a Rohn 25g or 45,55, Universal. I always apply Lithium Grease at the joints. This Helps putting up and taking apart towers in the Future. this also a creates an Electrical conductivity b

RE: [Repeater-Builder] 220 Repeater Power Amp

t note that > the 400 is rated att 98% shield where as 214 is at 96% for > whatever THAT fact is worth….probably nothing. - Mike > > > > From: Repeater-Builder@yahoogroups.com > [mailto:repeater-buil...@yahoogroups.com] On Behalf Of neal > Newman > Sent: Saturda

Re: [Repeater-Builder] 220 Repeater Power Amp

te: Saturday, March 14, 2009, 10:29 AM > RG-400 is the same as RG-142 except has a stranded center. > It's not crap. LMR400 is crap, but that's not what > he said. > > Chuck > WB2EDV > > > ----- Original Message - > From: neal Newman > T

RE: [Repeater-Builder] Re: Looking for 220 Repeater Antenna

/repeater antenna and he will Know.. Neal Newman-KA2CAF/ W2CJA  repeater system --- On Mon, 6/1/09, Michael Ryan wrote: From: Michael Ryan Subject: RE: [Repeater-Builder] Re: Looking for 220 Repeater Antenna To: Repeater-Builder@yahoogroups.com Date: Monday, June 1, 2009, 8:27 PM

Re: [Repeater-Builder] COR board for simple repeater??

Hey Rick Finally got my GMRS repeater on the air.. its mounted at 280 feet on the tower Just Below the 2 FM bays... Oh yeah Its n Ocean city ,NJ great coverage if your down in atlantic city area Neal --- On Wed, 8/19/09, Rick Szajkowski wrote: > From: Rick Szajkowski > Subject:

Re: [Repeater-Builder] kendecom repeaters on 220

Hey Jed How are you my Friend I have had Kendecomm Repeaters... The 2 meter machine was a good machine. never had Issues with it. The 200 Machine Probably had the Hottest receiver you could find on 220Mhz actually had 2 of these on 220.. Lost them in the House fire in 2007. I am still Running

Re: [Repeater-Builder] Re: Building Low Band Loop Antennas (DB-212)

Yep I have 2 6 meter repeaters I would be interested in the data to build a few DB-212 antennas Neal KA2CAF --- On Tue, 11/17/09, Adam T. Cately wrote: > From: Adam T. Cately > Subject: Re: [Repeater-Builder] Re: Building Low Band Loop Antennas (DB-212) > To: Repeater-Builder@yahoogroup

[Repeater-Builder] WYGG RFR

1st off they have a CP to power upgrade to 1.5kw vert 100 watts Horizontal 2nd They are licensed to operate at 100 Watts ERP translated thats 240 Watts TPO( transmitter Power output. as Far as Running 240 watts that is Correct For their licensed Power They were not Running too much power.

Re: [Repeater-Builder] Mhw710-3

Try Legend Electronics 140 Old Saw Mill River Road S Hawthorne, NY 10532 Fax: (914) 747-1770 Tel: (914) 747-1777 Monday to Friday 8:00am to 7:00pm EST Its a motorola RF Brick( module) or you can try Accord Technologies, Inc. 2515 Elwood Dr. #106 Ames, IA 50010 Phone:515-268-0578 Fax: 51

Re: Re: [Repeater-Builder] How much power should you run through a 350 W duplexe

If you Run a 300 watt repeater you do not need a duplexer. You Build the system with a Master site with the 300 watt transmitter in that rack you place several UHF link receivers and a voting system. then place Receivers all over the place Linked back to the master site. with a Duplexer I wo

Re: [Repeater-Builder] Re: Bad adapter

you wont notice the loss... My club just Put up a New antenna and New 7/8 hardline. the hardline was about 200 feet. the Tower Guy dropped a knife. 1 in a million shot and cut the hardline at the base of the Tower. I spliced the cable using 2- 7/8" EIA flanged Connectors because that what I ha

Re: Re: [Repeater-Builder] Re: Bad adapter

On a quick Note Ron If the repeater was for emergency services( Police,fire,ems or during a storm) ,and was a Must Get on the air at any cost that would save lives. I would allow that stupid splice Until I was able to get the correct connectors to make the Correct splice. and that would be

Re: Re: Re: [Repeater-Builder] Re: Bad adapter

ns. > > The type of splice would lead me to believe it had to be > quick and dirty to get something important on the air. > > 73, ron, n9ee/r > > > > >From: neal Newman <[EMAIL PROTECTED]> > >Date: 2008/04/22 Tue AM 07:44:46 CDT > >To: Repeater

Re: [Repeater-Builder] Maggorie transmitter arrived

 Just received my maggorie transmitter to replace my smoked Spectrum transmitter..  on my 2 meter machine. will Let you know how it works Out for me..  Neal-ka2caf 145.23 Monroe Twp,NJ 224.50   russ wrote: Hello Frank and the list. No the FCC does not require a 1st any longer but most broa

Re: [Repeater-Builder] What is it?

Before you go and cut down this UHF slotted dipole antenna Off the top..  My questions are Do you Own the Tower? or just another Tenant using it?  make sure that  No one using it.  it may no longer be  used for a translator, However  It may still be used by a local LPTV station.  Persona

Re: [Repeater-Builder] Re: Duplexer

Speaking Of Duplexers.. I have several Lengths of 1 5/8 Hardline. and looking to Build a 6 meter duplexer.. I have No Idea how to Fine Tune it if I build it. I have read the website on how to Build one many Times But I am still Confused... while changing out a Tube in a local FM trans

Re: [Repeater-Builder] I think I got burned by

 Check  N6CID Previously: KD6HCN FRANK B THOMPSON 1138 KOCH LN SAN JOSE CA 95125 USA Its not a Bogus Call. He just did a call Change..  found it on QRZ.  Neal KA2CAF Don wrote: Go here and put call in http://www.qrz.com/callsign Also http://www.buck.com/cgi-bin/do_hamcall

Re: [Repeater-Builder] duplexer (for sale)

 Kevin what are you replacing the  Sinclair with? I wish I had the money...  for some strange reason I cannot get more than 80db Isolation with My wacom WP-641 Cans...( ok they are over 25 years Old) except for some rust on the top of the cans and threaded rods  Its clean inside...  I wonder

Re: [Repeater-Builder]Wacom WP-641 Duplexer

I forgot to mention My measurments were Tip to Tip of the Pl-259 Connectors > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> You

Re: [Repeater-Builder]Wacom WP-641 Duplexer

Hey Guys.. I am having a problem with My Wacom Cans... I am just Courious what should the Length be for the 4 jumpers.. the 2 between the cans and the 2 that meet at the output Tee. the repeater is on 145.230 and what type cable should Be used ( I think its RG-213) I noticed that O

Re: [Repeater-Builder] Off topic - HT repair

Second Posting waiting reply Hey Guys.. I am having a problem with My Wacom Cans... I am just Courious what should the Length be for the 4 jumpers.. the 2 between the cans and the 2 that meet at the output Tee. the repeater is on 145.230 and what type cable should Be used ( I think

Re: [Repeater-Builder] wacom wp-641

BTW the cans are WP-641's Neal Newman wrote: >Second Posting waiting reply > > >Hey Guys.. I am having a problem with My Wacom Cans... I am just >Courious >what should the Length be for the 4 jumpers.. the 2 between the cans >and the 2 that meet at the >ou

Re: [Repeater-Builder] WACOM WP-641 Duplexer

lways be double-shielded; RG-214, RG-142, or RG-400 are good choices. Do not use RG-58, RG-8, or RG-213 because those are single-shield cables. 73, Eric Lemmon WB6FLY Neal Newman wrote: BTW the cans are WP-641's Neal Newman wrote: Hey Guys.. I am having a problem with my Wacom C

Re: [Repeater-Builder] WACOM WP-641 Duplexer

s but also did not answer the question..  what are the Lengths Of those cables??? I thought  they should have been around 13" each... ANYONE have a  WP641  wher they can Measure the cables lengths tip to tip AAARRHHHh.  LOL  Neal Kevin Custer wrote: Neal Ne

Re: [Repeater-Builder] WACOM WP-641 Duplexer

--- Original Message - From: Neal Newman To: Repeater-Builder@yahoogroups.com Sent: Wednesday, October 13, 2004 6:55 AM Subject: Re: [Repeater-Builder] WACOM WP-641 Duplexer Thanks Kevin  I thought it was RG-214  However it is stamped RG-213  Now Everyone has s

Re: [Repeater-Builder] WACOM WP-641 Duplexer

WERED. again, if I get the information back I will post it. James Neal Newman wrote: Thanks Kevin  I thought it was RG-214  However it is stamped RG-213  Now Everyone has skipped a rock on the lake and avoided the answer to the question. all 4 cables are different lengths.. I

Re: [Repeater-Builder] GROL - benefit?

 Hey Russ... I was out in West Chester PA 2 weeks ago... I wanted to Visit the station. But did not know where you were located... Neal russ wrote: I was 15 with a 3rd class and endorsed for broadcast got a job after school with a day time 500 watt omni. Even moved up to coming in before

Re: [Repeater-Builder] GROL - benefit?

,WUPC,W220AA russ wrote: Hey Neil, You should have let me know you where close. The Station is in Philly PA. but I could have run out to West Chester an picked you up. Very best of 73, Russ, W3CH   - Original Message - From: Neal Newman To

Re: [Repeater-Builder] Icom rp4020

Hey Jed what TIME and low band frequency are you guys hanging out on these days... Old Friend Neal KA2CAF Jed Barton wrote: >Hey guys, >Anyone know where I can get descriminator audio off the Icom rp4020? > >Thanks, >Jed > > > > > > >Yahoo! Groups Links > > > > > > > > > > Yahoo!

Re: [Repeater-Builder] maggiore's service

 Having met with Paul Maggiore , and spending a day with him. I find that very hard to believe. Paul  backs up his product. No matter who bought it for whom,..If it was built by his company  he will back up his product.. Neal Steve Grantham wrote: Caveat Emptor. If you buy Maggiore, the

Re: [Repeater-Builder] maggiore's service

 Joe  You are Correct..  I had asked Paul how and why he got into this Business.. and He told me  that it was his fathers business... after His Father passed. he went through a difficult time in his life as with any guy loosing his father.   He decided to carry on his Fathers reputation of pr

Re: [Repeater-Builder] Need Spectrum Commnuications Receiver & Transmitter Info.

Scott Spectrum is still around.. after 15 years I just had a receiver failure in my SCR-1000 Repeater. I called left a Message and within 24 hours  I got a call back  . I just shipped them the receiver  lets see how long it takes to Fix and return. Neal Scott wrote: Many thanks Russ, Joe

Re: [Repeater-Builder] Need Spectrum Commnuications Receiver & Transmitter Info.

 Hey whats with the transmitter on 145.230  that has no receiver??? I can hear you guys. but cannot talk back.. BTW  why dont you go to that Con Ed Fire at the navy yard... Richard Velez wrote: I have an scr1000 220 repeater. Its possibly the same. Call me. 718-999-1436 Rich/N2ROW

Re: [Repeater-Builder] Micor Units

As repeater owners... we all know what its like for a new Coordination Body to take over and screw things up.. well here we go again in the tri-state area with metrocor. all I will say is that my machines have been on the air for more than 15 years. at the present location For the past 10 ye

Re: [Repeater-Builder] Repeater Coordination

ck RF parts Yet... and what receiver would you recommend replacing a Hamtronics receiver with the choices are    Maggorie,Kendcom,,,spectrum . Kevin Custer wrote: May I remind everyone that this list (Repeater-Builder) is NOT for the discussion of coordination. Thanks... Kevin Custer

Re: [Repeater-Builder] Micor Units

 the question Mike is  will they tune down to 6 meters  and how big are they?  But then again I know thats a Dumb question.. Mike Perryman wrote: If anyone is interested (and I seriously doubt that will be the case!!) I have a complete BP/BR duplexer for that setup (72-76 MHz Micor Stat

Re: [Repeater-Builder] Re: Where to buy DB 224e

Russ what did that 224 Cost?? Neal-KA2CAF russ wrote: They also do have the DB-224e in stock I bought one from them last week. I got the price from Dean in the Glassboro NJ office. We installed it this morning and it is working very well on our 147.315 repeater in Chester PA. It is nice t

Re: [Repeater-Builder] Repeater Interference

 First off  You changed the Duplexer? how about the cables? I have found that a bad connection or Oxidation acts as a diode. and will allow the AM stations Audio to be heard.. I have this problem with a telco Box the Phone company placed  Exactly 1/4 wavelength away From My 10 kw AM trnamitte

Re: [Repeater-Builder] Inverting COS

Sorry I cannot resist this one.. And you call yourself a Ham? My wife the Novice could answer that question. Basic Transistor theory.. even an op-amp inverter Her reply isIf he does not know how to invert the signal he should not be building a repeater...! Next question...

Re: [Repeater-Builder] Inverting COS

Hey as an Elmer I teach my students electronic theory. His Elmer apparently has NOT. shame on Him minus -20 Elmer for him. Jeff Otterson wrote: > Neal Newman: > >You should be ashamed of yourself. > >Minus 10 Elmer points. > > Jeff > > At 11:44 PM 11/30/

Re: [Repeater-Builder] Inverting COS

resisting your comments. > > > > How very rude! How about showing a little support to a probable newbie, > eh? > > > > Eric > > > > > > -Original Message- > > From: Neal Newman [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, November 30, 200

Re: [Repeater-Builder] Inverting COS

lol at least someone has a sense of humor.. Because I have lost all of mine.. thanks for the 2 inverts.. Wade Lake wrote: > Here you go... You can even connect them together and we can end up right > where we started. ;-) > > - Original Message ----- > From: "

Re: [Repeater-Builder] Available door stop in Sioux City

Hey John does the receiver work I need one here Neal-KA2CAF address good in QRZ.com JOHN MACKEY wrote: >A door stop is now available in Sioux City, Iowa! > >It has crystals inside it for 147.66/06 and the front of the door stop says >"Spectrum Communications". > > > > > > > >Yahoo! Gro

Re: [Repeater-Builder] New repeater buildup

get the Maggiorie transmitter and receiver boards. they are 3x5 in size. draw very little power and  you will be running 5 watts right out of package without an external amp... I dont think you can get any smaller than that...  Neal hooker wrote: Hello group, I have the opp

Re: [Repeater-Builder] MSR 2000 Base Station

Hey Gregg  How do you  like that K2/100  I came across the website By accident.. been thinking of building one ever since.. I just wish it operated AM besides SSB... any info would be great.. easy Build and align???  Neal-ka2caf Gregg R. Lengling wrote: It really isn't that bad.

Re: [Repeater-Builder] Re: 220 Repeater

I do not remember the value of the resistor... But I put my pl on the wiper of the deviation Pot worked for years.. I ran a 13-509 repeater in the 80's then got a Spectrum around 1989. and its still running... If I had to Build a machine today I would be running a Maggorie. as for the 13-509

Re: [Repeater-Builder] Re: It is really funny!

My time to chime I had been running spectrums for years.2 meter transmitter died in one machine replaced it with a Maggorie..  nice and clean.. does the job.  I replaced a Hamtronics receiver in another machine with a MastrII receiver. Until  my Maggorie arrived.  After I installed the Maggo

Re: [Repeater-Builder] Powering the Repeater With Marine Batteries/ UPS

My machines all run 12 volts when I loose 120Vac the only thing I loose is the power amp so the machine goes from 180 watts down to 30 watts the UPS backup is for the Computer in the shack. when that dies Ohh well no big loss the backup Generator should be running before that happens...

Re: [Repeater-Builder] Thank you for all the replys about the DB-228.

 Hey Russ its almost like putting 2 of the old Cushcraft 4 dipole arrays together=8 poles..  I think that was rated at 12 db...4 elements was between 6-9 Db...  I still run the Cushcraft 4 pole on the 440 machine. russ wrote: Thank You all that replied, I guess I will stop tomorrow morni

Re: [Repeater-Builder] 220 Mhz. repeater

I have Maggiore machines also  Yes They have power  On and they work great... Neil McKie wrote: Did you apply power to them? Neil Jed Barton wrote: I'll second that, I own 3 maggiore repeaters. One of my sights, ihaven't been to in over 3 years. -Original Message

Re: [Repeater-Builder] Re: QRZ Database

Doug  Run a Virus scanner  like SOPHOS Mcafee and Norton wont find all trojans.. sophos will  free trial at www.sophos.com  sounds like your Router is getting flooded by a trojan  I was getting the same thing had to unplug the router to clear the flooding NEAL-ka2acf Doug W7FDF wrote:

Re: [Repeater-Builder] Re: OT: NC man charged with 'driving a cop car' due to ham antennas

Yeah Right USDHS is the First step to being American Nazis I Vant to see your papers you need to carry your birth certificate or passport upstate NY without Leaving the state. I know it happened to me. First thing Customs needs to do is to get rid of the Mexican looking officers out of NY

Re: [Repeater-Builder] Re: OT: NC man charged with 'driving a cop car' due to ham antennas

 Not For nothing.  I once owned a Crown Vic  Bought it from a police auction  complete with the Bolted Transmission. It was an old PA state Police chase car can you say Fast  YEP.  But the speed limit is Only 65. when I lived in NY  I was involved in law enforcement. also  my local OEM. I ha

Re: [Repeater-Builder] Re:OT: NC man charged with 'driving a cop car' due to ham antennas

Ken That's an Understatement.. If we ever Meet boy have I got a True story to tell you. Its one thing to have border patrol at a border. Its another thing to have border patrol over 100 miles south of the border in the middle of nowhere. and stranding a Taxpayer in the middle of nowhere du

Re: [Repeater-Builder] Re: OT: NC man charged with 'driving acop car' due to ham antennas

Neil McKie wrote:  actually at the Time  the FCC had a list of all Type accepted Radar units for Police use.  and the Radar that was used was not on the list as  Type accepted.. theirfore the ticket had to be dismissed. I also challanged a ticket like that  and won.(  this was over 20+ year

Re: [Repeater-Builder] Still after

Hey Kevin You have any Picsof this Or Diagrams On making the loops and Pass Notch info Caps ect. Ive Been looking for a while for 6 meter cans.. I have 1 5/8 hardline was going to Build a Helix Duplexer. How long are the cavites? why not just Use Stovepipe and Cap both Ends? Neal Y

Re: [Repeater-Builder] Name that Duplexer!

Not sure of the model # But they sure do look like Db Products Duplexers Mike Besemer (WM4B) wrote: >Greetings all, > >My club has a spare set up duplexers that we want to have ready for use in >the event we ever need them. Unfortunately, we don't know what they are and >they have no markings o

Re: [Repeater-Builder] Name that Duplexer!

 I  could not find the old catalog Tom with the Number But said they were Db products   Yes I agree on the 4062's Neal-ka2caf Tom Parker wrote: Mike, Looks like to me you have a DB 4062.  Very good duplexer.  You can find the specs on line... just google for them.  They tune up r

Re: [Repeater-Builder] Name that Duplexer!

we stand corrected thanks Jimmy Jimmy Floyd wrote: >They look like the DB-4060 4 cavity duplexer 2 transmit and 2 receive. >The DB 4062 is the 6 cavity duplexer. >Both are BP/BR. >Tuning instructions can be found at >http://www.repeater-builder.com/db/db-4060-4062-tuning-inst.pdf > > >J

Re: [Repeater-Builder] GLB Preselector Preamp, Re: midland 13-509 220mhz to convert to repeater

 For Years I used the GLB Preamp/Preselector on thefront end of my Midland 509 220Mhz  repeater the preamp stage is  an MRF-901  I think a Gasfet Preamp will create to much noise Bob Dengler wrote: At 8/2/2005 06:55 PM, you wrote: Joe wrote: I had an FM76 conver

Re: [Repeater-Builder] QRZ dot Com...where are they???

QRZ.com is working I just tried it// Neal-ka2caf Doug W7FDF wrote: >I tried earlier this morning [around 830am Thursday]. I tried just >before I left home [this morning] for work [around 1230pm] and I >tried >tonight [just a few minutes ago] at 1030pm PST]. No QRZ. com! > >...where [website]

Re: [Repeater-Builder] 220 Repeater Stuff

HEY Andy what Frequency are you planning On putting this 220 repeater? Andrew wrote: >Guys, > If anyone has any 220 repeater equipment they would like to get rid >of (sell/working) such as amplifiers, RX or TX stuff and things of >that nature please contact me direct off list. I am in need

Re: [Repeater-Builder] 220 Repeater Stuff

 Hi  Andy  That Freq pair used to belong to Jay Gerstel KA2CUS You should see If he still has his old repeater. Was this a metroCor? coordination.. Because they have been screwing up They coordinated a few People on MY pairs but so far No real interference. they did it on my 2 meter a

Re: [Repeater-Builder] 220 Repeater Stuff

 Very Cool  I took over the Oldbridge repeater  I Understand.  Did Jay give/sell you the old machine? thats what I was getting at. Neal Andrew G. wrote: Jay's letting us have the pair. His machine is offline and it is my baby now. I would not even think of being like some AH's and putting

Re: [Repeater-Builder] 220 Repeater Stuff

I did Not know that... wow   deeply sadened   he was a good guy Jay is now a SK sadly.   Andy __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com YAH

Re: [Repeater-Builder] 220 Repeater Stuff

BTW hes still listed in QRZ when did he pass away? Andrew G. wrote: Jay is now a SK sadly.   Andy __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Re: [Repeater-Builder] What is A Repeater??

Doug Fitts W7FDF wrote: Now there is a name from the Past DOUG FITTS... LOL how the Heck are you.. If you didnt Hear Harry WB2KFO passed away just before Christmas... Neal Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Build

Re: [Repeater-Builder] Re: What is A Repeater??

I always thought a repeater was currency with repeater serial numbers like 101010101 or 200200200 Or a Person that repeats the same thing Over and over and over and over and over KK >oes this have to do with the thread I created, "What Is A >Repeater??". > >Doug W7FDF > > > > > > > >

  1   2   >