Re: [spectrum] [Spectrum]

[Rajashekar Reddy]

Also, once you loaded the SSDB from prod to your test environment, follow
the below steps in test servers.

move to $SPECROOT/SS-Tools/ and execute the below command to remove the
landscape handle and the precedence of your prod spectrum.

./MapUpdate -remove  -precedence 

Replace   with the landscape handle value of the spectrum
to remove from the map.
And replace  with the precedence value of the landscape to
remove.

Example:  ./MapUpdate -remove 0x40 -precedence 20

On Tue, May 8, 2018 at 7:32 PM, Christian Schneider <
christian.schnei...@4-tune.ch> wrote:

> You may load it with -r #LH to replace the Landscape and you should
> protect it from the production by limiting it via firewall or by setting
> the .hostrc accordingly..
>
> Regards
>
> Christian Schneider
> Enterprise Service Specialist
>
> 4-tune GmbH
> Sägereistrasse 33
> CH-8152 Glattbrugg
>
> Tel   +41 71 930 07 00
> Fax  +41 71 930 07 01
> Mob +41 79 418 45 42
> Mail christian.schnei...@4-tune.ch
>
> > Am 09.05.2018 um 00:33 schrieb pmurtey <pmur...@cox.net>:
> >
> > It shouldn’t be doing this if you have your .hostrc file, and your hosts
> file locked down.
> >
> > -Original Message-
> > From: Jon Magnus Dullerud [mailto:dulle...@gmail.com]
> > Sent: Tuesday, May 08, 2018 12:06 PM
> > To: spectrum
> > Subject: [spectrum] [Spectrum]
> >
> > Hi.
> > I need to load a save from a fault tolerant env on a test server in the
> same network.
> > Is it possible to create a save that doesn’t contain a landscape map, my
> test server keeps «failing over» to my production backup server.
> >
> > If I could create a save without the landscape map it would solve the
> issue. Ca support tells me to solve it in the .hostrc file, by limiting
> which servers that can access the backupservers, thats a way to do it… I
> think its better to remove any trace / reference to the backup servers.
> > Can it be done and how?
> >
> > Our setup is as lets say:
> > Prod
> > 2 oneclicks
> > 2 spectruservers (one of them is of course the mls) 0x30 and
> 0x80
> > 2 backupservers0x30and0x80
> >
> > Test
> > 1 oneclick
> > 2 spectroserver 0x30and 0x80
> >
> > So I wish to load the db from prod on the test servers without fault
> tolerant, because it will try to use the same backup servers as prod.
> >
> >
> >
> >
> > Best Regards
> > Jon Magnus Dullerud
> > Norwegian Defence.
> > ---
> > To unsubscribe from spectrum, send email to lists...@unc.edu with the
> body: unsubscribe spectrum pmur...@cox.net
> >
> >
> > ---
> > To unsubscribe from spectrum, send email to lists...@unc.edu with the
> body: unsubscribe spectrum christian.schnei...@4-tune.ch
>
>
> ---
> To unsubscribe from spectrum, send email to lists...@unc.edu with the
> body: unsubscribe spectrum rajashekarma...@gmail.com
>



-- 
Cheers...
Rajashekar. A

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] [Spectrum]

[pmurtey]

It shouldn’t be doing this if you have your .hostrc file, and your hosts file 
locked down.

-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] 
Sent: Tuesday, May 08, 2018 12:06 PM
To: spectrum
Subject: [spectrum] [Spectrum]

Hi.
I need to load a save from a fault tolerant env on a test server in the same 
network.
Is it possible to create a save that doesn’t contain a landscape map, my test 
server keeps «failing over» to my production backup server.

If I could create a save without the landscape map it would solve the issue. Ca 
support tells me to solve it in the .hostrc file, by limiting which servers 
that can access the backupservers, thats a way to do it… I think its better to 
remove any trace / reference to the backup servers.
Can it be done and how?

Our setup is as lets say:
Prod
2 oneclicks
2 spectruservers (one of them is of course the mls) 0x30 and0x80
2 backupservers 0x30and 0x80

Test
1 oneclick
2 spectroserver 0x30and 0x80

So I wish to load the db from prod on the test servers without fault tolerant, 
because it will try to use the same backup servers as prod.




Best Regards
Jon Magnus Dullerud
Norwegian Defence.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum pmur...@cox.net


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] [Spectrum]

[Jon Magnus Dullerud]

Hi.
I need to load a save from a fault tolerant env on a test server in the same 
network.
Is it possible to create a save that doesn’t contain a landscape map, my test 
server keeps «failing over» to my production backup server.

If I could create a save without the landscape map it would solve the issue. Ca 
support tells me to solve it in the .hostrc file, by limiting which servers 
that can access the backupservers, thats a way to do it… 
I think its better to remove any trace / reference to the backup servers.
Can it be done and how?

Our setup is as lets say:
Prod
2 oneclicks
2 spectruservers (one of them is of course the mls) 0x30 and0x80
2 backupservers 0x30and 0x80

Test
1 oneclick
2 spectroserver 0x30and 0x80

So I wish to load the db from prod on the test servers without fault tolerant, 
because it will try to use the same backup servers as prod.




Best Regards
Jon Magnus Dullerud
Norwegian Defence.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum Upgrade - GEN01091046M.tar

[Tabarzadi, Shahla]

Have you checked the pre-req patches for your OS?

From: Stephen Boshoff [mailto:stephen.bosh...@t-systems.co.za]
Sent: Wednesday, May 3, 2017 3:38 AM
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] Spectrum Upgrade - GEN01091046M.tar

Hi all
I am busy testing Spectrum 10.2 installation and getting the following error.
[root@SPECTRUM01 spec10.2]# ./installer
Warning: Missing charsets in String to FontSet conversion
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
JRE libraries are missing or not compatible
Exiting
Has anyone else seen this?

Kind regards

Stephen Boshoff
[T-Systems South Africa]<http://www.t-systems.co.za>

Delivery

Team Leader: ESM

1 The Crescent, Westway Office Park, Westville, Durban, 3629

+27(64)739-5877 (Phone)

+27(60)981-5942 (Mobile)

+27(86)642-3243 (Fax)

Email: stephen.bosh...@t-systems.co.za<mailto:stephen.bosh...@t-systems.co.za>

Registration Number: 1989/007547/07

[#UNOUTSOURCE]<http://un-outsource.co.za>





Disclaimer: This message and/or attachment(s) may contain privileged, 
confidential and/or personal information. If you are not the intended recipient 
you may not disclose or distribute any of the information contained within this 
message. In such case you must destroy this message and inform the sender of 
the error. T-Systems does not accept liability for any errors, omissions, 
information and viruses contained in the transmission of this message. Any 
opinions, conclusions and other information contained within this message not 
related to T-Systems' official business is deemed to be that of the individual 
only and is not endorsed by T-Systems.

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
shahla.tabarz...@mail.house.gov<mailto:shahla.tabarz...@mail.house.gov>

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Antwort: Re: [spectrum] SPECTRUM 10.2 2M model count scale

[Christian Fieres]

Robert,

thanks for pointing me in the right direction. I understand that (a) 
compatibility is given, more than this, a necessity unless you create a 
fresh database and (b) I made a mistake by talking about a "5-byte 
counter" which in fact is merely a "5-nybble counter" or, what I actually 
thought of, a "5 hex-char counter" ;-)

Gee, I wish I had had this doc three months ago! I came from 9.2.2 and 
went through different scenarios until I came up with a 9.2.2 -> 9.4 -> 
10.1 -> 10.1.1 migration plan. Dealing with at least five different 
"Install" documents by CA for the respective interim versions was HELL and 
I doubted that everything came up running again until shortly before 
starting the upgraded SS for the first time. But having a step-by-step 
migration plan beforehand and testing all crucial features before touching 
production proved once again as the best way to do something like this and 
took quite a bit of my time. (This is what management ignores with great 
effort: For them, it is just "click here to install, next, next, finish" 
and, come again, you need ten days for an upgrade? We grant you four, make 
that five in case you need to call support ... :-(

Thanks again!

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Robert Hermann <robert.herm...@gmail.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  30.12.2016 13:29
Betreff:Re: [spectrum] SPECTRUM 10.2 2M model count scale



I stumbled upon the same today.

CA has introduced "Huge Landscape Handels" to support more than 1 million 
models on 1 landscape. The "old" landscape handels are now called "Legacy 
Landscape Handle".
more information: 

https://docops.ca.com/ca-spectrum/10-2/en/administrating/distributed-spectroserver-administration/setting-up-a-distributed-spectroserver-environment#SettingUpaDistributedSpectroSERVEREnvironment-LHLandscapeHandles

Also, Jason Meader had posted 10.2 Upgrade Scenarios document to the 
community board: https://communities.ca.com/docs/DOC-231172056

Upgrades are not getting easier ;)


On Fri, Dec 30, 2016 at 9:57 AM, Christian Fieres <c.fie...@mainova.de> 
wrote:
Hi all,

I am wondering as to how CA deals with the current handle limitation when 
managing up to 2 million models per landscape in SPECTRUM 10.2 - in my 
world, the landscape handle followed by a 5-byte counter provides for 
1048575 unique models in addition to the VNM model at 0x0. Has 
anyone tested 10.2 yet and might enlighten me whether I should pay 
attention to possible changes in handle value sizes when planning a 10.2 
deployment? I don' t think I'm the only geek with quite a bunch of CLI 
scripts that may need a change here and there in case we get another digit 
in between.

Regards,

Christian
Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
7173 - USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum robert.herm...@gmail.com 

--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum c.fie...@mainova.de 



Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] SPECTRUM 10.2 2M model count scale

[Robert Hermann]

I stumbled upon the same today.

CA has introduced "Huge Landscape Handels" to support more than 1 million
models on 1 landscape. The "old" landscape handels are now called "Legacy
Landscape Handle".
more information:

https://docops.ca.com/ca-spectrum/10-2/en/administrating/distributed-spectroserver-administration/setting-up-a-distributed-spectroserver-environment#SettingUpaDistributedSpectroSERVEREnvironment-LHLandscapeHandles

Also, Jason Meader had posted 10.2 Upgrade Scenarios document to the
community board: https://communities.ca.com/docs/DOC-231172056

Upgrades are not getting easier ;)


On Fri, Dec 30, 2016 at 9:57 AM, Christian Fieres 
wrote:

> Hi all,
>
> I am wondering as to how CA deals with the current handle limitation when
> managing up to 2 million models per landscape in SPECTRUM 10.2 - in my
> world, the landscape handle followed by a 5-byte counter provides for
> 1048575 unique models in addition to the VNM model at 0x0. Has
> anyone tested 10.2 yet and might enlighten me whether I should pay
> attention to possible changes in handle value sizes when planning a 10.2
> deployment? I don' t think I'm the only geek with quite a bunch of CLI
> scripts that may need a change here and there in case we get another digit
> in between.
>
> Regards,
>
> Christian
> Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
> Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
> Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach,
> Lothar Herbst
> Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB
> 7173 - USt-IdNr. DE 114184034
>
>
> Mainova steht für besten Service, faire Verträge und top Preise für Ihre
> Energie - mit Auszeichnung!
> Mehr Infos unter: http://www.mainova.de/auszeichnung
>
>- --To unsubscribe from spectrum, send email to lists...@unc.edu with
>the body: unsubscribe spectrum robert.herm...@gmail.com
>
>

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: Antwort: RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi Christian
Yes, it's great that the attrr is available. As you say it needs to be 
selectable during a discovery.
Just a thought, policy manager could be used to ensure this attr is always set 
to 'no' so that no one subsequently changes the value.
Regards
Stephen.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 11 August 2016 08:14
To: Stephen Warne <stephenwa...@karelia-ns.com>
Cc: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] 
SPECTRUM without Ping?

Hi Stephen,

I wouldn't want to implement such a huge change in behaviour myself too ;-) As 
we have learned, there is this "support_ICMP" attribute that prevents, if set 
to false, Pings to the device. IMHO, all that's left to do is make this 
attribute available to the new model by ip/name dialog boxes. Shouldn't be too 
hard for CA!

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:08.08.2016 15:28
Betreff:    RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM 
without Ping?




Hi Christian

1.   Your security people don't want icmp on the network - box ticked.
2.   You can't stipulate SNMP only on Spectrum so the functionality of 
receiving 'management agent lost' wouldn't be available to you anyway. So the 
fact that Spectrum doesn't get a response to ping when SNMP polling fails will 
mean that a contact lost will be generated as the attempt to ping will not get 
a response- which if you think about it correct.

The only issue I can think off is if this would drive Spectrum nuts if it uses 
ping at any other another time other than in an SNMP lost contact situation. 
Obviously Ping only models would be a no-no ;-) as would having any SPM ICMP 
tests, but I'm not sure if ICMP would be used at any other time during normal 
operation or at startup (haven't sniffed it to find out).

I should add that this point that if you do choose to implement this workaround 
it is entirely at your own risk and like any customisation should be thoroughly 
tested in your lab environment first. I personally would not implement this to 
be honest, it's just an idea in case you are stuck between the proverbial rock 
and a hard place :)

I will go and vote up your idea as having the functionality built in and 
supported is the way to go.

Regards
Stephen.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 08 August 2016 12:26
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?

Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from leaving 
the server will do it, because in that case SPECTRUM won't get replies either 
and will alarm the device. Or am I getting something wrong here? ;-)

I have created an idea document in the Infrastructure Management community on 
ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them in 
the first place - we are still talking rumours here! -, I understand that I am 
not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:    "spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Kopie:spectrum 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:05.08.2016 18:14
Betreff:Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?





Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the next 
level by stopping the icmp packets even getting off the server by utilising the 
server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 'dumb 
down' Spectrum by being able to choose to use SNMP only would be a good 
enhanceme

Antwort: RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Hi Stephen,

I wouldn't want to implement such a huge change in behaviour myself too 
;-) As we have learned, there is this "support_ICMP" attribute that 
prevents, if set to false, Pings to the device. IMHO, all that's left to 
do is make this attribute available to the new model by ip/name dialog 
boxes. Shouldn't be too hard for CA!

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  08.08.2016 15:28
Betreff:RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] 
SPECTRUM without Ping?



Hi Christian 
 
1.   Your security people don?t want icmp on the network ? box ticked.
2.   You can?t stipulate SNMP only on Spectrum so the functionality of 
receiving ?management agent lost? wouldn?t be available to you anyway. So 
the fact that Spectrum doesn?t get a response to ping when SNMP polling 
fails will mean that a contact lost will be generated as the attempt to 
ping will not get a response? which if you think about it correct.
 
The only issue I can think off is if this would drive Spectrum nuts if it 
uses ping at any other another time other than in an SNMP lost contact 
situation. Obviously Ping only models would be a no-no ;-) as would having 
any SPM ICMP tests, but I?m not sure if ICMP would be used at any other 
time during normal operation or at startup (haven?t sniffed it to find 
out).
 
I should add that this point that if you do choose to implement this 
workaround it is entirely at your own risk and like any customisation 
should be thoroughly tested in your lab environment first. I personally 
would not implement this to be honest, it?s just an idea in case you are 
stuck between the proverbial rock and a hard place J
 
I will go and vote up your idea as having the functionality built in and 
supported is the way to go. 
 
Regards
Stephen.
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 08 August 2016 12:26
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM 
without Ping?
 
Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from 
leaving the server will do it, because in that case SPECTRUM won't get 
replies either and will alarm the device. Or am I getting something wrong 
here? ;-)

I have created an idea document in the Infrastructure Management community 
on ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them 
in the first place - we are still talking rumours here! -, I understand 
that I am not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An:"spectrum" <spectrum@listserv.unc.edu>
Kopie:spectrum <spectrum@listserv.unc.edu>
Datum:    05.08.2016 18:14
Betreff:Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?




Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the 
next level by stopping the icmp packets even getting off the server by 
utilising the server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 
'dumb down' Spectrum by being able to choose to use SNMP only would be a 
good enhancement request which I for one would vote up on the community. 
In fact thinking about this it would be preferable to have that option per 
LAN container / subnet / IP address so that a hybrid approach could be 
used so that for devices where ping is ok you wouldn't lose functionality. 


CA need to be aware that other vendors could use this issue to beat them 
up when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.
 


Sent from my iPhone 

On 5 Aug 2016, at 12:13, Christian Fieres <c.fie...@mainova.de> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it 
just like I understood, that is put a firewall between the servers and 
SPECTRUM that blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SN

RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi Christian


1.   Your security people don't want icmp on the network - box ticked.

2.   You can't stipulate SNMP only on Spectrum so the functionality of 
receiving 'management agent lost' wouldn't be available to you anyway. So the 
fact that Spectrum doesn't get a response to ping when SNMP polling fails will 
mean that a contact lost will be generated as the attempt to ping will not get 
a response- which if you think about it correct.


The only issue I can think off is if this would drive Spectrum nuts if it uses 
ping at any other another time other than in an SNMP lost contact situation. 
Obviously Ping only models would be a no-no ;-) as would having any SPM ICMP 
tests, but I'm not sure if ICMP would be used at any other time during normal 
operation or at startup (haven't sniffed it to find out).

I should add that this point that if you do choose to implement this workaround 
it is entirely at your own risk and like any customisation should be thoroughly 
tested in your lab environment first. I personally would not implement this to 
be honest, it's just an idea in case you are stuck between the proverbial rock 
and a hard place :)

I will go and vote up your idea as having the functionality built in and 
supported is the way to go.

Regards
Stephen.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 08 August 2016 12:26
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?

Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from leaving 
the server will do it, because in that case SPECTRUM won't get replies either 
and will alarm the device. Or am I getting something wrong here? ;-)

I have created an idea document in the Infrastructure Management community on 
ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them in 
the first place - we are still talking rumours here! -, I understand that I am 
not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Kopie:spectrum 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:05.08.2016 18:14
Betreff:Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?




Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the next 
level by stopping the icmp packets even getting off the server by utilising the 
server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 'dumb 
down' Spectrum by being able to choose to use SNMP only would be a good 
enhancement request which I for one would vote up on the community. In fact 
thinking about this it would be preferable to have that option per LAN 
container / subnet / IP address so that a hybrid approach could be used so that 
for devices where ping is ok you wouldn't lose functionality.

CA need to be aware that other vendors could use this issue to beat them up 
when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.



Sent from my iPhone

On 5 Aug 2016, at 12:13, Christian Fieres 
<c.fie...@mainova.de<mailto:c.fie...@mainova.de>> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it just 
like I understood, that is put a firewall between the servers and SPECTRUM that 
blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - EXCEPT 
in cases you just cannot use one of them. Let's be honest, you have your 
Pingable devices, so why not have your SNMP only devices - as a CHOICE? I am 
absolutely no friend of  global restrictions, and I don't want to be 
misunderstood in that matter: My intention would be to just disable Ping 
necessity on certain devices. In fact , we do have a use case right now; we 
have a server (rather an appliance when it comes to limited administration) 
which simply cannot be configured to reply to ICMP packets. What we did is 
build a Correlation domain that fi

Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from 
leaving the server will do it, because in that case SPECTRUM won't get 
replies either and will alarm the device. Or am I getting something wrong 
here? ;-)

I have created an idea document in the Infrastructure Management community 
on ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them 
in the first place - we are still talking rumours here! -, I understand 
that I am not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Kopie:  spectrum <spectrum@listserv.unc.edu>
Datum:  05.08.2016 18:14
Betreff:Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?



Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the 
next level by stopping the icmp packets even getting off the server by 
utilising the server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 
'dumb down' Spectrum by being able to choose to use SNMP only would be a 
good enhancement request which I for one would vote up on the community. 
In fact thinking about this it would be preferable to have that option per 
LAN container / subnet / IP address so that a hybrid approach could be 
used so that for devices where ping is ok you wouldn't lose functionality. 


CA need to be aware that other vendors could use this issue to beat them 
up when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.
 


Sent from my iPhone 

On 5 Aug 2016, at 12:13, Christian Fieres <c.fie...@mainova.de> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it 
just like I understood, that is put a firewall between the servers and 
SPECTRUM that blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - 
EXCEPT in cases you just cannot use one of them. Let's be honest, you have 
your Pingable devices, so why not have your SNMP only devices - as a 
CHOICE? I am absolutely no friend of  global restrictions, and I don't 
want to be misunderstood in that matter: My intention would be to just 
disable Ping necessity on certain devices. In fact , we do have a use case 
right now; we have a server (rather an appliance when it comes to limited 
administration) which simply cannot be configured to reply to ICMP 
packets. What we did is build a Correlation domain that fires an alarm as 
soon as two TCP tests on port 443 from two different IP-SLA test routers 
time out. This not  only says the server is not reachable but merely 
points to an actual problem with its HTTPS server. What we cannot do is 
manage the process that serves port 443 although the box answers to SNMP 
packets. *sigh* It could all be so easy.

Frankly, I am a little afraid that eventually this might be escalating and 
someone (with a higher income than mine) comes up with the idea that an 
Icinga or something might be an alternative to SPECTRUM and forces me to 
do a quick and dirty migration that destroys all the good work we have 
done over the years. Guess I'll have to double check the policies around 
here and proactively place an enhancement request with CA...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An:"spectrum" <spectrum@listserv.unc.edu>
Datum:    05.08.2016 12:53
Betreff:RE: Antwort: Re: [spectrum] SPECTRUM without Ping?



Tsking up Vilius?s workaround suggestion if you implemented a firewall 
rule actually on your spectrum server and block outbound ICMP traffic that 
will stop it ever reaching the network.
 
The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way 
they are. If you rely on using SNMP only then a non responding SNMP agent, 
or the accidential misconfiguration of it, will result 

Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the next 
level by stopping the icmp packets even getting off the server by utilising the 
server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 'dumb 
down' Spectrum by being able to choose to use SNMP only would be a good 
enhancement request which I for one would vote up on the community. In fact 
thinking about this it would be preferable to have that option per LAN 
container / subnet / IP address so that a hybrid approach could be used so that 
for devices where ping is ok you wouldn't lose functionality.

CA need to be aware that other vendors could use this issue to beat them up 
when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.



Sent from my iPhone

On 5 Aug 2016, at 12:13, Christian Fieres 
<c.fie...@mainova.de<mailto:c.fie...@mainova.de>> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it just 
like I understood, that is put a firewall between the servers and SPECTRUM that 
blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - EXCEPT 
in cases you just cannot use one of them. Let's be honest, you have your 
Pingable devices, so why not have your SNMP only devices - as a CHOICE? I am 
absolutely no friend of  global restrictions, and I don't want to be 
misunderstood in that matter: My intention would be to just disable Ping 
necessity on certain devices. In fact , we do have a use case right now; we 
have a server (rather an appliance when it comes to limited administration) 
which simply cannot be configured to reply to ICMP packets. What we did is 
build a Correlation domain that fires an alarm as soon as two TCP tests on port 
443 from two different IP-SLA test routers time out. This not  only says the 
server is not reachable but merely points to an actual problem with its HTTPS 
server. What we cannot do is manage the process that serves port 443 although 
the box answers to SNMP packets. *sigh* It could all be so easy.

Frankly, I am a little afraid that eventually this might be escalating and 
someone (with a higher income than mine) comes up with the idea that an Icinga 
or something might be an alternative to SPECTRUM and forces me to do a quick 
and dirty migration that destroys all the good work we have done over the 
years. Guess I'll have to double check the policies around here and proactively 
place an enhancement request with CA...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:    05.08.2016 12:53
Betreff:RE: Antwort: Re: [spectrum] SPECTRUM without Ping?




Tsking up Vilius’s workaround suggestion if you implemented a firewall rule 
actually on your spectrum server and block outbound ICMP traffic that will stop 
it ever reaching the network.

The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way they 
are. If you rely on using SNMP only then a non responding SNMP agent, or the 
accidential misconfiguration of it, will result in a lost contact alarm which 
isn’t necessarily correct. Thiscan mess up availability reports big time.
Over the years I have monitored a number of switch models which stop responding 
to SNMP from time to time and need to be rebooted to rectify this fault. #As 
you would expect getting a change control to reboot a device isn’t always easy 
and until that happens you are stuck with putting the device into maintenance 
mode and accruing down time / unmanaged time in your availability reports. If 
you are using Spectrum Service Manager would be a real.
So in short, the fact that Spectrum uses both ICMP and Ping is usually a good 
thing and gives it an advantage over systems where you are forced to use one or 
the other.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 10:38
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: Antwort: Re: [spectrum] SPECTRUM without

Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it 
just like I understood, that is put a firewall between the servers and 
SPECTRUM that blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - 
EXCEPT in cases you just cannot use one of them. Let's be honest, you have 
your Pingable devices, so why not have your SNMP only devices - as a 
CHOICE? I am absolutely no friend of  global restrictions, and I don't 
want to be misunderstood in that matter: My intention would be to just 
disable Ping necessity on certain devices. In fact , we do have a use case 
right now; we have a server (rather an appliance when it comes to limited 
administration) which simply cannot be configured to reply to ICMP 
packets. What we did is build a Correlation domain that fires an alarm as 
soon as two TCP tests on port 443 from two different IP-SLA test routers 
time out. This not  only says the server is not reachable but merely 
points to an actual problem with its HTTPS server. What we cannot do is 
manage the process that serves port 443 although the box answers to SNMP 
packets. *sigh* It could all be so easy.

Frankly, I am a little afraid that eventually this might be escalating and 
someone (with a higher income than mine) comes up with the idea that an 
Icinga or something might be an alternative to SPECTRUM and forces me to 
do a quick and dirty migration that destroys all the good work we have 
done over the years. Guess I'll have to double check the policies around 
here and proactively place an enhancement request with CA...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  05.08.2016 12:53
Betreff:RE: Antwort: Re: [spectrum] SPECTRUM without Ping?



Tsking up Vilius?s workaround suggestion if you implemented a firewall 
rule actually on your spectrum server and block outbound ICMP traffic that 
will stop it ever reaching the network.
 
The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way 
they are. If you rely on using SNMP only then a non responding SNMP agent, 
or the accidential misconfiguration of it, will result in a lost contact 
alarm which isn?t necessarily correct. Thiscan mess up availability 
reports big time.
Over the years I have monitored a number of switch models which stop 
responding to SNMP from time to time and need to be rebooted to rectify 
this fault. #As you would expect getting a change control to reboot a 
device isn?t always easy and until that happens you are stuck with putting 
the device into maintenance mode and accruing down time / unmanaged time 
in your availability reports. If you are using Spectrum Service Manager 
would be a real.
So in short, the fact that Spectrum uses both ICMP and Ping is usually a 
good thing and gives it an advantage over systems where you are forced to 
use one or the other.
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 05 August 2016 10:38
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: [spectrum] SPECTRUM without Ping?
 
Vilius, Stephen (and David :-),

I'm afraid in terms of server hardening - and this is the point this whole 
mess started -, just those servers that *cannot* be hardened will thus be 
put behind a sophisticated application layer firewall and might be allowed 
to be reachable by ICMP (by means of a firewall rule). The devices that 
*can* be hardened and thus *not* be put behind this firewall are the ones 
I am talking about as there (supposedly) has been a decision by management 
that ICMP will be blocked as a part of the whole security package.

I guess it will, as David wrote, be a question of opening the local 
firewalls to certain ICMP type packets from the SpectroSERVERs or deciding 
to use a system other than SPECTRUM to do management. Which, of course, 
means migration needs that no one might be willing to pay for.

Nonetheless, I am with Stephen here, it is a very interesting question 
since for SPECTRUM, Ping and SNMP have always been in a marriage, which 
might not be very state of the art nowadays. Wonder what CA would say 
about this...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 962361

RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Tsking up Vilius's workaround suggestion if you implemented a firewall rule 
actually on your spectrum server and block outbound ICMP traffic that will stop 
it ever reaching the network.

The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way they 
are. If you rely on using SNMP only then a non responding SNMP agent, or the 
accidential misconfiguration of it, will result in a lost contact alarm which 
isn't necessarily correct. Thiscan mess up availability reports big time.
Over the years I have monitored a number of switch models which stop responding 
to SNMP from time to time and need to be rebooted to rectify this fault. #As 
you would expect getting a change control to reboot a device isn't always easy 
and until that happens you are stuck with putting the device into maintenance 
mode and accruing down time / unmanaged time in your availability reports. If 
you are using Spectrum Service Manager would be a real.
So in short, the fact that Spectrum uses both ICMP and Ping is usually a good 
thing and gives it an advantage over systems where you are forced to use one or 
the other.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 10:38
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: [spectrum] SPECTRUM without Ping?

Vilius, Stephen (and David :-),

I'm afraid in terms of server hardening - and this is the point this whole mess 
started -, just those servers that *cannot* be hardened will thus be put behind 
a sophisticated application layer firewall and might be allowed to be reachable 
by ICMP (by means of a firewall rule). The devices that *can* be hardened and 
thus *not* be put behind this firewall are the ones I am talking about as there 
(supposedly) has been a decision by management that ICMP will be blocked as a 
part of the whole security package.

I guess it will, as David wrote, be a question of opening the local firewalls 
to certain ICMP type packets from the SpectroSERVERs or deciding to use a 
system other than SPECTRUM to do management. Which, of course, means migration 
needs that no one might be willing to pay for.

Nonetheless, I am with Stephen here, it is a very interesting question since 
for SPECTRUM, Ping and SNMP have always been in a marriage, which might not be 
very state of the art nowadays. Wonder what CA would say about this...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Vilius Benetis 
<vilius.bene...@gmail.com<mailto:vilius.bene...@gmail.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Kopie:spectrum 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:05.08.2016 11:26
Betreff:Re: [spectrum] SPECTRUM without Ping?




What about to put a firewall to block icmp from spectrum to restricted devices?

-vilius

On 05 Aug 2016, at 12:14, Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>> wrote:

Hi David and Christian
I think that Christian's requirement might be that Spectrum never pings devices 
to keep the security team off his back?
I am not aware of any way to prevent spectrum attempting to ping after snmp 
contact failures but would be very interested if you or others know a way of 
changing this default behaviour.
Regards
Stephen.

From: David Game [mailto:david.g...@uk.logicalis.com]
Sent: 05 August 2016 09:58
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: RE: [spectrum] SPECTRUM without Ping?

There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>

Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Vilius, Stephen (and David :-),

I'm afraid in terms of server hardening - and this is the point this whole 
mess started -, just those servers that *cannot* be hardened will thus be 
put behind a sophisticated application layer firewall and might be allowed 
to be reachable by ICMP (by means of a firewall rule). The devices that 
*can* be hardened and thus *not* be put behind this firewall are the ones 
I am talking about as there (supposedly) has been a decision by management 
that ICMP will be blocked as a part of the whole security package.

I guess it will, as David wrote, be a question of opening the local 
firewalls to certain ICMP type packets from the SpectroSERVERs or deciding 
to use a system other than SPECTRUM to do management. Which, of course, 
means migration needs that no one might be willing to pay for.

Nonetheless, I am with Stephen here, it is a very interesting question 
since for SPECTRUM, Ping and SNMP have always been in a marriage, which 
might not be very state of the art nowadays. Wonder what CA would say 
about this...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Vilius Benetis <vilius.bene...@gmail.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Kopie:  spectrum <spectrum@listserv.unc.edu>
Datum:  05.08.2016 11:26
Betreff:    Re: [spectrum] SPECTRUM without Ping?



What about to put a firewall to block icmp from spectrum to restricted 
devices?

-vilius

On 05 Aug 2016, at 12:14, Stephen Warne <stephenwa...@karelia-ns.com> 
wrote:

Hi David and Christian 
I think that Christian?s requirement might be that Spectrum never pings 
devices to keep the security team off his back?
I am not aware of any way to prevent spectrum attempting to ping after 
snmp contact failures but would be very interested if you or others know a 
way of changing this default behaviour.
Regards
Stephen.
 
From: David Game [mailto:david.g...@uk.logicalis.com] 
Sent: 05 August 2016 09:58
To: spectrum <spectrum@listserv.unc.edu>
Subject: RE: [spectrum] SPECTRUM without Ping?
 
There?s an option in discovery to not ping before trying SNMP poll ? works 
OK. We have this policy on a couple of high-security customers and around 
some of our own environment.
 
With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn?t be affected.  The only thing is on a 
?CONTACT LOST TO DEVICE? alarm, the ?are you there yet?? pings every 60 
seconds or so obviously won?t work, so it could be up to one or two poll 
cycles before the alarm clears.
 
Dave
 
*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE 
***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd
 
110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out more
_ 
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] SPECTRUM without Ping?
 
Hi all,

rumour has it our security policy leads to all our servers being prevented 
from answering ICMP echo requests soon. As it so happens, we as network 
management specialists have never been asked about implications of such a 
decision. ;-) Hopefully it stays a rumour, but you never know - so I'd 
like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried 
to come up with a (simple) solution to obsolete ICMP in regards to 
SPECTRUM management? I am not talking about SPM tests to those servers as 
a replacement, it is mandatory to continue using SNMPv3 for RFC2790 stuff 
et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
7173 - USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum david.g...@uk.logicalis.com 

Please be aware that Logicalis UK Ltd may monitor email traffic data

Re: [spectrum] SPECTRUM without Ping?

[Vilius Benetis]

What about to put a firewall to block icmp from spectrum to restricted devices?

-vilius

> On 05 Aug 2016, at 12:14, Stephen Warne <stephenwa...@karelia-ns.com> wrote:
> 
> Hi David and Christian
> I think that Christian’s requirement might be that Spectrum never pings 
> devices to keep the security team off his back?
> I am not aware of any way to prevent spectrum attempting to ping after snmp 
> contact failures but would be very interested if you or others know a way of 
> changing this default behaviour.
> Regards
> Stephen.
>  
> From: David Game [mailto:david.g...@uk.logicalis.com] 
> Sent: 05 August 2016 09:58
> To: spectrum <spectrum@listserv.unc.edu>
> Subject: RE: [spectrum] SPECTRUM without Ping?
>  
> There’s an option in discovery to not ping before trying SNMP poll – works 
> OK. We have this policy on a couple of high-security customers and around 
> some of our own environment.
>  
> With regards to devices already discovered, SNMP polling is always first 
> anyway, so normal operation shouldn’t be affected.  The only thing is on a 
> “CONTACT LOST TO DEVICE” alarm, the “are you there yet?” pings every 60 
> seconds or so obviously won’t work, so it could be up to one or two poll 
> cycles before the alarm clears.
>  
> Dave
>  
> *** ADVANCE NOTICE ***
> *** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
> David K. Game
> Infrastructure Management Systems Consultant
> Logicalis UK Ltd
>  
> 110 Buckingham Avenue, Slough, Berkshire, SL1 4PF
> 
> Logicalis Optimal Network Insight
> How future-ready is your network? Find out more
> _____
>  
> From: Christian Fieres [mailto:c.fie...@mainova.de] 
> Sent: 05 August 2016 09:31
> To: spectrum <spectrum@listserv.unc.edu>
> Subject: [spectrum] SPECTRUM without Ping?
>  
> Hi all,
> 
> rumour has it our security policy leads to all our servers being prevented 
> from answering ICMP echo requests soon. As it so happens, we as network 
> management specialists have never been asked about implications of such a  
> decision. ;-) Hopefully it stays a rumour, but you never know - so I'd like 
> to be prepared.
> 
> Easy question, although I assume I know the answer: Has anybody ever tried to 
> come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
> management? I am not talking about SPM tests to those servers as a 
> replacement, it is mandatory to continue using SNMPv3 for RFC2790 stuff et 
> cetera.
> 
> Best regards,
> Christian Fieres
> 
> Mainova AG
> Sachgebiet Netz- und Infrastruktur (M3-ST4)
> Teamleiter Service Operation Center
> Solmsstraße 38
> 60623 Frankfurt am Main
> 
> Telefon 069 213 23617
> Mobil 0170 5601563
> Telefax 069 213 9623617
> E-Mail c.fie...@mainova.de
> Internet http://www.mainova.de
> 
> Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
> Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
> Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
> Lothar Herbst
> Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
> 7173 - USt-IdNr. DE 114184034
> 
> 
> Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
> Energie - mit Auszeichnung!
> Mehr Infos unter: http://www.mainova.de/auszeichnung
> --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
> unsubscribe spectrum david.g...@uk.logicalis.com
> 
> Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
> email content for security purposes.
> __
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please visit http://www.symanteccloud.com
> __
> 
> This email communication does not create or vary any contractual relationship 
> between Logicalis and you. Internet communications are not secure and 
> accordingly Logicalis does not accept any legal liability for the contents of 
> this message. The contents of this email are confidential to the intended 
> recipient at the email address to which it has been addressed. It may not be 
> disclosed to or used by anyone other than this addressee, nor may it be 
> copied in any way. If received in error, please contact Logicalis on the 
> above switchboard number quoting the name of the sender and the addressee and 
> then delete it from your system. Please note that neither Logicalis nor the 
> sender accepts any responsibility for viruses and it

RE: Antwort: RE: [spectrum] SPECTRUM without Ping?

[David Game]

For ping-only devices, you're screwed!  Basically :)

This is a case of security being a bit over-zealous.  You could always request 
that ping be allowed solely from Spectrum and nowhere else. If they refuse, 
then you just have to go back to the business and state "I can't monitor the 
status of these devices at all.  What are you going to do about it.  
Alternatively, if you are allowed SDC through firewalls, you can manage ping 
only across security zones that way.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 10:15
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: RE: [spectrum] SPECTRUM without Ping?

That's a surprise! Is that a per-model parameter? If not, what about Pingable 
Devices?

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:David Game 
<david.g...@uk.logicalis.com<mailto:david.g...@uk.logicalis.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:    05.08.2016 10:58
Betreff:RE: [spectrum] SPECTRUM without Ping?




There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: [spectrum] SPECTRUM without Ping?

Hi all,

rumour has it our security policy leads to all our servers being prevented from 
answering ICMP echo requests soon. As it so happens, we as network management 
specialists have never been asked about implications of such a  decision. ;-) 
Hopefully it stays a rumour, but you never know - so I'd like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried to 
come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
management? I am not talking about SPM tests to those servers as a replacement, 
it is mandatory to continue using SNMPv3 for RFC2790 stuff et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu>with the body: unsubscribe spectrum 
david.g...@uk.logicalis.com<mailto:david.g...@uk.logicalis.com>

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email h

RE: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi David and Christian
I think that Christian's requirement might be that Spectrum never pings devices 
to keep the security team off his back?
I am not aware of any way to prevent spectrum attempting to ping after snmp 
contact failures but would be very interested if you or others know a way of 
changing this default behaviour.
Regards
Stephen.

From: David Game [mailto:david.g...@uk.logicalis.com]
Sent: 05 August 2016 09:58
To: spectrum <spectrum@listserv.unc.edu>
Subject: RE: [spectrum] SPECTRUM without Ping?

There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: [spectrum] SPECTRUM without Ping?

Hi all,

rumour has it our security policy leads to all our servers being prevented from 
answering ICMP echo requests soon. As it so happens, we as network management 
specialists have never been asked about implications of such a  decision. ;-) 
Hopefully it stays a rumour, but you never know - so I'd like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried to 
come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
management? I am not talking about SPM tests to those servers as a replacement, 
it is mandatory to continue using SNMPv3 for RFC2790 stuff et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
david.g...@uk.logicalis.com<mailto:david.g...@uk.logicalis.com>

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd, Registered in England and Wales No: 3732397, Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF

__
This email has been scanned by the Symantec 

Antwort: RE: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

That's a surprise! Is that a per-model parameter? If not, what about 
Pingable Devices?

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:David Game <david.g...@uk.logicalis.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  05.08.2016 10:58
Betreff:    RE: [spectrum] SPECTRUM without Ping?



There?s an option in discovery to not ping before trying SNMP poll ? works 
OK. We have this policy on a couple of high-security customers and around 
some of our own environment.
 
With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn?t be affected.  The only thing is on a 
?CONTACT LOST TO DEVICE? alarm, the ?are you there yet?? pings every 60 
seconds or so obviously won?t work, so it could be up to one or two poll 
cycles before the alarm clears.
 
Dave
 
*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE 
***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd
 
110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out more
_ 
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] SPECTRUM without Ping?
 
Hi all,

rumour has it our security policy leads to all our servers being prevented 
from answering ICMP echo requests soon. As it so happens, we as network 
management specialists have never been asked about implications of such a 
decision. ;-) Hopefully it stays a rumour, but you never know - so I'd 
like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried 
to come up with a (simple) solution to obsolete ICMP in regards to 
SPECTRUM management? I am not talking about SPM tests to those servers as 
a replacement, it is mandatory to continue using SNMPv3 for RFC2790 stuff 
et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
7173 - USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum david.g...@uk.logicalis.com 

Please be aware that Logicalis UK Ltd may monitor email traffic data and 
also email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

This email communication does not create or vary any contractual 
relationship between Logicalis and you. Internet communications are not 
secure and accordingly Logicalis does not accept any legal liability for 
the contents of this message. The contents of this email are confidential 
to the intended recipient at the email address to which it has been 
addressed. It may not be disclosed to or used by anyone other than this 
addressee, nor may it be copied in any way. If received in error, please 
contact Logicalis on the above switchboard number quoting the name of the 
sender and the addressee and then delete it from your system. Please note 
that neither Logicalis nor the sender accepts any responsibility for 
viruses and it is your responsibility to scan the email and attachments 
(if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and 
also email content for security purposes.

Logicalis UK Ltd, Registered in England and Wales No: 3732397, Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__
--To unsubscribe from spectrum, send email to lists...@unc.edu with the

RE: [spectrum] SPECTRUM without Ping?

[David Game]

There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] SPECTRUM without Ping?

Hi all,

rumour has it our security policy leads to all our servers being prevented from 
answering ICMP echo requests soon. As it so happens, we as network management 
specialists have never been asked about implications of such a  decision. ;-) 
Hopefully it stays a rumour, but you never know - so I'd like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried to 
come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
management? I am not talking about SPM tests to those servers as a replacement, 
it is mandatory to continue using SNMPv3 for RFC2790 stuff et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
david.g...@uk.logicalis.com<mailto:david.g...@uk.logicalis.com>

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] SPECTRUM without Ping?

[Christian Fieres]

Hi all,

rumour has it our security policy leads to all our servers being prevented 
from answering ICMP echo requests soon. As it so happens, we as network 
management specialists have never been asked about implications of such a 
decision. ;-) Hopefully it stays a rumour, but you never know - so I'd 
like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried 
to come up with a (simple) solution to obsolete ICMP in regards to 
SPECTRUM management? I am not talking about SPM tests to those servers as 
a replacement, it is mandatory to continue using SNMPv3 for RFC2790 stuff 
et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de


Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] spectrum digest: July 26, 2016

[Markus Speer]

Ich bin bis So 14.08.2016 nicht im Büro.

Ihre Mail wird in dieser Zeit nicht bearbeitet und auch nicht
weitergeleitet.
In dringenden Fällen wenden Sie sich in dieser Zeit bitte an einen meiner
Kollegen oder unser NOC (n...@uni-muenster.de, Tel 0251/83-31500).


smime.p7s
Description: S/MIME cryptographic signature

[spectrum] Spectrum loading a new IOS to a router

[Stephen Boshoff]

Hi

Does anyone know where / how you upload an ios to a router in Spectrum version 
v9.3?
I have done it in the past many version ago , but something must have changed 
in the last few version and I cannot working?


Kind regards

Stephen Boshoff

T-Systems SA (Pty) Ltd
Delivery
Stephen Boshoff
Team Leader: ESM
International Business Gateway, New Road, Midrand, 1685
P O BOX 2496, Midrand, 1685
Phone: +27(31)254-6002
Mobile: +27(60)981-5942
Email: stephen.bosh...@t-systems.co.za
http://www.t-systems.co.za
Registration Number: 1989/007547/07

-Original Message-
From: David Game [mailto:david.g...@uk.logicalis.com]
Sent: 17 April 2016 12:40 AM
To: spectrum <spectrum@listserv.unc.edu>
Subject: RE: [spectrum] Rediscover new model types.

Have you tried hacking NewMM.pl in $SPECROOT/Install-Tools/PostInstall?

Dave

David K. Game
Infrastructure Management Systems Consultant Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out more 
_


-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com]
Sent: 16 April 2016 17:59
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] Rediscover new model types.

Hi All.
Do anyone know how to get spectrum to change modeltype on a newly modeled model 
type?
We created a custom model with "model type editor", I can’t get spectrum to 
change the model type unless we delete it and discovers it again.
It´s a lot of work to delete all these devices and discover them again, so it 
would be nice if someone had a solution for me :-)


/jon magnus
Norwegian Defence





---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum david.g...@uk.logicalis.com

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com 
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com 
__

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum stephen.bosh...@t-systems.co.za


Disclaimer: This message and/or attachment(s) may contain privileged, 
confidential and/or personal information. If you are not the intended recipient 
you may not disclose or distribute any of the information contained within this 
message. In such case you must destroy this message and inform the sender of 
the error. T-Systems does not accept liability for any errors, omissions, 
information and viruses contained in the transmission of this message. Any 
opinions, conclusions and other information contained within this message not 
related to T-Systems' official business is deemed to be that of the individual 
only and is not endorsed by T-Systems.

This message and/or attachment(s) may contain privileged or confidential
 
information. If you are not the intended recipient you may not disclose or  
  
distribute any of the information contained within this message. In such
case you must destroy this message and inform the sender of the error.
T-Systems does not accept liability for any errors, omissions, information
and viruses contained in the transmission of this message. Any opinions, 
conclusions and other information contained within this message not related 
to T-Systems' official business is deemed to be that 

RE:[spectrum] Spectrum 10.1.1 release ?

[Stephen Warne]

Last I heard it had been delayed and no new date announced.

From: Murtey, Patrick [mailto:pmur...@mgmresorts.com]
Sent: 16 March 2016 22:02
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] Spectrum 10.1.1 release ?

Hi All,
Anybody know when Spectrum 10.1.1 will be released?

Thanks
Patrick


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 10.1.1 release ?

[Murtey, Patrick]

Hi All,
Anybody know when Spectrum 10.1.1 will be released?

Thanks
Patrick


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 10.0 / 10.1

[Jon Magnus Dullerud]

Hi all.
I am wondering if anyone have any experience with spectrum ver 10.0 or 10.1 
regarding stability, any other issues issues?

I am not sure if its stabile enough to run any of them in a production 
environment?

Best Regards
Jon Magnus Dullerud
Norwegian Defence.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum 10.0 / 10.1

[David Game]

We're running 10.0 in a production environment with no major issues so far. 
We're using 2012 R2 servers hardened to CIS guidelines as well.  Only thing I 
had to do to make the install work was to manually disable UAC in the Local 
Security Policy. It can be re-enabled after installation.

Dave

David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out more
_ 

-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] 
Sent: 18 January 2016 17:14
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] Spectrum 10.0 / 10.1

Hi all.
I am wondering if anyone have any experience with spectrum ver 10.0 or 10.1 
regarding stability, any other issues issues?

I am not sure if its stabile enough to run any of them in a production 
environment?

Best Regards
Jon Magnus Dullerud
Norwegian Defence.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum david.g...@uk.logicalis.com

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com 
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum License count

[Barnes, William]

Amitay,
Spectrum doesn’t enforce the expiration date, but many people have licenses 
that track the number of devices that they have modeled.  The license tracking 
goes by the number of accountable models.  There is no way to tell how many you 
have left.  What you have to do is to look at the number of accountable models, 
which is an attribute on your VNM and subtract that from your negotiated 
license.
Bill

From: Amitay Ben-ishay 
<amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>>
Reply-To: Amitay Ben-ishay 
<amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>>
Date: Monday, January 11, 2016 at 7:52 AM
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: RE: [spectrum] Spectrum License count

As I know from the latest versions, spectrum no longer force the licvense.

Best Regards, Amitay.
__

From: ro...@petrobras.com.br<mailto:ro...@petrobras.com.br> 
[mailto:ro...@petrobras.com.br]
Sent: Wednesday, January 06, 2016 5:50 PM
To: spectrum
Cc: spectrum
Subject: Re: [spectrum] Spectrum License count


 Kavi,

Good question. I think the Spectrum does not keeps a remaining licence count, 
at least for my installation.

Roger


[Inactive hide details for "kavi arasu" ---06/01/2016 12:42:57---Hi All, How 
can i get the total license count in Spectrum. I go]"kavi arasu" ---06/01/2016 
12:42:57---Hi All, How can i get the total license count in Spectrum. I got 
only total accountable device. How

De: "kavi arasu" <kaviaras...@gmail.com<mailto:kaviaras...@gmail.com>>
Para: "spectrum" <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Data: 06/01/2016 12:42
Assunto: [spectrum] Spectrum License count





Hi All,

How can i get the total license count in Spectrum. I got only total accountable 
device. How should i view the remaining license count.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
ro...@petrobras.com.br<mailto:ro...@petrobras.com.br>




"O emitente desta mensagem ? respons?vel por seu conte?do e endere?amento. Cabe 
ao destinat?rio cuidar quanto ao tratamento adequado. Sem a devida autoriza??o, 
a divulga??o, a reprodu??o, a distribui??o ou qualquer outra a??o em 
desconformidade com as normas internas do Sistema Petrobras s?o proibidas e 
pass?veis de san??o disciplinar, c?vel e criminal."



"The sender of this message is responsible for its content and addressing. The 
receiver shall take proper care of it. Without due authorization, the 
publication, reproduction, distribution or the performance of any other action 
not conforming to Petrobras System internal policies and procedures is 
forbidden and liable to disciplinary, civil or criminal sanctions."



"El emisor de este mensaje es responsable por su contenido y direccionamiento. 
Cabe al destinatario darle el tratamiento adecuado. Sin la debida autorizaci?n, 
su divulgaci?n, reproducci?n, distribuci?n o cualquier otra acci?n no conforme 
a las normas internas del Sistema Petrobras est?n prohibidas y ser?n pasibles 
de sanci?n disciplinaria, civil y penal."

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>


This message contains information that may be confidential or privileged.
If you are not the intended recipient, you may not use, copy or disclose
to anyone any of the information in this message. If you have received
this message and are not the intended recipient, kindly notify the sender
and delete this message from your computer.

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
william_bar...@cable.comcast.com<mailto:william_bar...@cable.comcast.com>

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum License count

[Amitay Ben-ishay]

As I know from the latest versions, spectrum no longer force the licvense.

Best Regards, Amitay.
__

From: ro...@petrobras.com.br [mailto:ro...@petrobras.com.br]
Sent: Wednesday, January 06, 2016 5:50 PM
To: spectrum
Cc: spectrum
Subject: Re: [spectrum] Spectrum License count


 Kavi,

Good question. I think the Spectrum does not keeps a remaining licence count, 
at least for my installation.

Roger


[Inactive hide details for "kavi arasu" ---06/01/2016 12:42:57---Hi All, How 
can i get the total license count in Spectrum. I go]"kavi arasu" ---06/01/2016 
12:42:57---Hi All, How can i get the total license count in Spectrum. I got 
only total accountable device. How

De: "kavi arasu" <kaviaras...@gmail.com<mailto:kaviaras...@gmail.com>>
Para: "spectrum" <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Data: 06/01/2016 12:42
Assunto: [spectrum] Spectrum License count





Hi All,

How can i get the total license count in Spectrum. I got only total accountable 
device. How should i view the remaining license count.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
ro...@petrobras.com.br<mailto:ro...@petrobras.com.br>




"O emitente desta mensagem ? respons?vel por seu conte?do e endere?amento. Cabe 
ao destinat?rio cuidar quanto ao tratamento adequado. Sem a devida autoriza??o, 
a divulga??o, a reprodu??o, a distribui??o ou qualquer outra a??o em 
desconformidade com as normas internas do Sistema Petrobras s?o proibidas e 
pass?veis de san??o disciplinar, c?vel e criminal."



"The sender of this message is responsible for its content and addressing. The 
receiver shall take proper care of it. Without due authorization, the 
publication, reproduction, distribution or the performance of any other action 
not conforming to Petrobras System internal policies and procedures is 
forbidden and liable to disciplinary, civil or criminal sanctions."



"El emisor de este mensaje es responsable por su contenido y direccionamiento. 
Cabe al destinatario darle el tratamiento adecuado. Sin la debida autorizaci?n, 
su divulgaci?n, reproducci?n, distribuci?n o cualquier otra acci?n no conforme 
a las normas internas del Sistema Petrobras est?n prohibidas y ser?n pasibles 
de sanci?n disciplinaria, civil y penal."

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>

This message contains information that may be confidential or privileged.
If you are not the intended recipient, you may not use, copy or disclose
to anyone any of the information in this message. If you have received
this message and are not the intended recipient, kindly notify the sender
and delete this message from your computer.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum License count

[kavi arasu]

Hi All,

How can i get the total license count in Spectrum. I got only total accountable 
device. How should i view the remaining license count. 

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum License count

[roger]

 Kavi,

Good question. I think the Spectrum does not keeps a remaining licence
count, at least for my installation.

Roger




De: "kavi arasu" <kaviaras...@gmail.com>
Para:   "spectrum" <spectrum@listserv.unc.edu>
Data:   06/01/2016 12:42
Assunto:[spectrum] Spectrum License count



Hi All,

How can i get the total license count in Spectrum. I got only total
accountable device. How should i view the remaining license count.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body:
unsubscribe spectrum ro...@petrobras.com.br
 
"O emitente desta mensagem é responsável por seu conteúdo e endereçamento. Cabe 
ao destinatário cuidar quanto ao tratamento adequado. Sem a devida autorização, 
a divulgação, a reprodução, a distribuição ou qualquer outra ação em 
desconformidade com as normas internas do Sistema Petrobras são proibidas e 
passíveis de sanção disciplinar, cível e criminal."
 
"The sender of this message is responsible for its content and addressing. The 
receiver shall take proper care of it. Without due authorization, the 
publication, reproduction, distribution or the performance of  any other action 
not conforming to Petrobras System internal policies and procedures is 
forbidden and liable to disciplinary, civil or criminal sanctions."
 
"El emisor de este mensaje es responsable por su contenido y direccionamiento. 
Cabe al destinatario darle el tratamiento adecuado. Sin la debida autorización, 
su divulgación, reproducción, distribución o cualquier otra acción no conforme 
a las normas internas del Sistema Petrobras están prohibidas y serán pasibles 
de sanción disciplinaria, civil y penal."

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 10 and eHealth 6.2.3.9 - Live Health alarm issues

[David Game]

Has anyone seen issues with Spectrum 10 and it's handling of LiveHealth alarms 
from eHealth?

We've got a bunch of servers being monitored by Spectrum & eHealth and we're 
using LiveHealth for baseline breaching of time-over-threshold conditions for 
disk/cpu/memory etc. as Spectrum's own handling isn't as flexible as we'd like.

We're seeing alarms assert from LiveHealth correctly, however if a clear alarm 
trap is sent (either via manually clearing in LiveHealth or the condition is no 
longer breaching and LiveHealth send it itself) we get a Critical alarm every 
time stating "UNKNOWN LIVE HEALTH ALARM" - and we get a couple of events one of 
which has no varbinds in it, the other giving the Critical alarm.

Unfortunatley due to the sensitivity of the network (and the fact I can only 
access it via a restricted Citrix session) getting screenshots is near-on 
impossible, but suffice it to say I have looked at WireShark traces of the 
traps coming in from LiveHealth and we're only receiveing one SNMP trap per 
clear, but for some reason we're getting multiple events.

If I get no joy here, next port of call is a ticket with CA support!

Thanks & regards

Dave

David K. Game
Consultant - Infrastructure Management Systems
Logicalis UK Ltd

[http://www.fatherdyer.org/admin/skins/Ascribe/icons/16x16/email.png]
  
[http://files.softicons.com/download/system-icons/cats-icons-2-by-mcdo-design/png/16x16/Web%20Site.png]
    
[http://www.ithound.com/images/twitter_icon.gif?1254826736] 
   
[http://www.cah.ucf.edu/common/images/icons/facebook.png] 
   
[http://www.metametrix.com/media/21236/icon_linkedin.png] 
   
[cid:image009.png@01CF1C50.C107D0B0] 
110 Buckingham Avenue, Slough, Berkshire, SL1 4PF
_
[http://www.reed.co.uk/resources/cms/images/logos/Banner_18028.png] 
[CA_Cert_Pro_Spectrum_r9x_sml]



This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 9.4.3 has been released

[Nason, Roger W]

Spectrum 9.4.3 has been released. It is available for download from the 
Spectrum Solutions  Patches Index at 
http://www.ca.com/us/support/ca-support-online/product-content/recommended-reading/technical-document-index/ca-spectrum-infrastructure-manager-r9-4-solutions-patches.aspx

It can also be downloaded from the ftp site: 
ftp://ftp.ca.com/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.04.03.00/


Roger Nason
Support Delivery Manager
CA Capacity Management  CA Spectrum

[https://km.ca.com/technicalsupport/Email%20Signature/Gray.png]
CA Technologies | 273 Corporate Dr Suite 200 | Portsmouth, NH 03801
Office: +1 603 334 2491 | Mobile: +1 603 833 6660 | roger.na...@ca.com




---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: AW: [spectrum] Spectrum Polling Information

[wiedel]

Kavi,
From our experience here, the vendors tend to sent SNMP TRAPs when fans 
or
power supplies fail.  They will also send ok TRAPs when things are working ok.

   There are usually MIB variables you can poll, sometimes directly
from OneClick such as for cisco routers ( Component detail screen, Information 
tab,
Cisco Environment Monitor Information menu).  Older Enterasys gear shows similar
information and it is available on the new gear from the Environment MIB.  I 
don't know
why Spectrum didn't pick up on that.

All that being said, you will still want the ability to poll the gear.
Case in point:  Switch running with redundant power supplies each fed from a 
separate UPS.
The building looses power and the UPSs go onto battery.
Eventually one UPS will drain its battery so shuts down.
You will get a power supply failure TRAP from the switch causing an alarm.
The second UPS drains its battery and it shuts down.
Spectrum will generate a red contact lost alarm.
Power is restored and both UPSs and power supplies come online; the switch 
reboots.
The contact lost alarm is cleared.
The power supply failed alarm REMAINs but it is now not true.

You will need to manually clear that alarm preferably after asking the switch 
if everything is OK.

Hope that helps!
James


Torsten Syring wrote:

Hi Kavi,


in SPECROOT/SS-Tools/ there is a utility named LogPollAnalyser

If you execute it, it gives you a list of the number of models and the 
attributes beeing polled on a model type basis.



regards



Torsten Syring

DICOS GmbH Kommunikationssysteme
Alsfelder Strasse 11
64289 Darmstadt

Tel.:+49 6151 82787 30
Mobil: +49 1761 82787 30
Fax:+49 6151 82787 59

DICOS GmbH Kommunikationssysteme, Alsfelder Strasse 11, 64289 Darmstadt
Sitz der Gesellschaft: Darmstadt, Amtsgericht Darmstadt HRB 7024,
Geschäftsführer: Dr. Winfried Geyer, Stephan Hesse, Waldemar Wiesner

-Ursprüngliche Nachricht-
*Von:* kavi arasu kaviaras...@gmail.com
*Gesendet:* Die 11 August 2015 19:33
*An:* spectrum spectrum@listserv.unc.edu
*Betreff:* [spectrum] Spectrum Polling Information

Hi All,

Does spectrum identifies Power supply and Fan status faults during normal 
polling cycle or we need to create a watcher for this.

Is it possible to get the list of parameters monitored by spectrum during 
polling.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum t.syr...@dicos.de

* --To unsubscribe from spectrum, send email to lists...@unc.edu
  mailto:lists...@unc.edu with the body: unsubscribe spectrum
  wie...@usc.edu 



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

AW: [spectrum] Spectrum Polling Information

[Torsten Syring]

Hi Kavi,



in SPECROOT/SS-Tools/ there is a utility named LogPollAnalyser

If you execute it, it gives you a list of the number of models and the 
attributes beeing polled on a model type basis.



regards





Torsten Syring
 
 DICOS GmbH Kommunikationssysteme
 Alsfelder Strasse 11
 64289 Darmstadt
 
 Tel.:    +49 6151 82787 30
 Mobil: +49 1761 82787 30 
 Fax:    +49 6151 82787 59
 
 DICOS GmbH Kommunikationssysteme, Alsfelder Strasse 11, 64289 Darmstadt
 Sitz der Gesellschaft: Darmstadt, Amtsgericht Darmstadt HRB 7024,
 Geschäftsführer: Dr. Winfried Geyer, Stephan Hesse, Waldemar Wiesner

-Ursprüngliche Nachricht-
Von: kavi arasu kaviaras...@gmail.com
Gesendet: Die 11 August 2015 19:33
An: spectrum spectrum@listserv.unc.edu
Betreff: [spectrum] Spectrum Polling Information


Hi All,

Does spectrum identifies Power supply and Fan status faults during normal 
polling cycle or we need to create a watcher for this.

Is it possible to get the list of parameters monitored by spectrum during 
polling.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum t.syr...@dicos.de


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Polling Information

[kavi arasu]

Hi All,

Does spectrum identifies Power supply and Fan status faults during normal 
polling cycle or we need to create a watcher for this.

Is it possible to get the list of parameters monitored by spectrum during 
polling.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum topology applet in Smart tv

[Stephen Warne]

Hi Kavi
I'm not totally up to date on Smart TVs but it is my understanding that the 
majority or even all of them have cut down browsers which don't support Java.
Regards
Stephen.

-Original Message-
From: kavi arasu [mailto:kaviaras...@gmail.com] 
Sent: 04 June 2015 16:12
To: spectrum
Subject: [spectrum] Spectrum topology applet in Smart tv

Hi All,

Had any one tried launching topology on the smart tv via topology applet web 
link.

I tried, but getting blank page due to JRE. Is there a way to display topology 
on smart tv.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum stephenwa...@karelia-ns.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum topology applet in Smart tv

[Jon Magnus Dullerud]

Hi.
I got it working, I you need java, and you have to authenticate.
Do you get it working in Ie or another browser, it is very slow, takes a long 
time to bring up a view.

Best Regards
Jon Magnus Dullerud
Nor CyDef, Cyber Services and Operations (Norwegian CyberDefence) 


 4. jun. 2015 kl. 17.11 skrev kavi arasu kaviaras...@gmail.com:
 
 Hi All,
 
 Had any one tried launching topology on the smart tv via topology applet web 
 link.
 
 I tried, but getting blank page due to JRE. Is there a way to display 
 topology on smart tv.
 
 Thanks,
 Kavi
 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum dulle...@gmail.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum topology applet in Smart tv

[kavi arasu]

Hi All,

Had any one tried launching topology on the smart tv via topology applet web 
link.

I tried, but getting blank page due to JRE. Is there a way to display topology 
on smart tv.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 9.2.3.PTF_H0301 is released and available for download

[Cantwell, Rene D]

Apologizes in my delay in getting this notification out.

Spectrum PTF patch 9.2.3.PTF_H0301 is released and available for download.

The download is available from the Spectrum Solutions  Patches Index at CA 
Spectrum Infrastructure Manager r9.2 Solutions  Patches - CA 
Technologieshttp://www.ca.com/us/support/ca-support-online/product-content/recommended-reading/technical-document-index/ca-spectrum-infrastructure-manager-r92-solutions-patches.aspx
 or this ftp link  
ftp://ftp.ca.com/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.03.PTF_H1301 .

Details of what is included in 9.2.3.PTF_H0301 are documented in the 
ReleaseNote.PTF_H1301.txt file located at the ftp link above, as well as in the 
knowledgebase doc TEC1651784 
http://www.ca.com/us/support/ca-support-online/product-content/knowledgebase-articles/TEC1651784.aspx
 Which CA Spectrum 9.2.3.H12 PTF patches are included in 9.2.3.H13?


--
Rene'

Rene' Cantwell
CA Technologies
Support Delivery Manager
603-334-2497
rene.cantw...@ca.commailto:rene.cantw...@ca.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum 9.2.3.PTF_H0301 is released and available for download

[Cantwell, Rene D]

Correction - PTF_H1301 not H0301.


From: Cantwell, Rene D
Sent: Tuesday, March 10, 2015 2:06 PM
To: 'spectrum'
Subject: Spectrum 9.2.3.PTF_H0301 is released and available for download

Apologizes in my delay in getting this notification out.

Spectrum PTF patch 9.2.3.PTF_H0301 is released and available for download.

The download is available from the Spectrum Solutions  Patches Index at CA 
Spectrum Infrastructure Manager r9.2 Solutions  Patches - CA 
Technologieshttp://www.ca.com/us/support/ca-support-online/product-content/recommended-reading/technical-document-index/ca-spectrum-infrastructure-manager-r92-solutions-patches.aspx
 or this ftp link  
ftp://ftp.ca.com/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.03.PTF_H1301 .

Details of what is included in 9.2.3.PTF_H0301 are documented in the 
ReleaseNote.PTF_H1301.txt file located at the ftp link above, as well as in the 
knowledgebase doc TEC1651784 
http://www.ca.com/us/support/ca-support-online/product-content/knowledgebase-articles/TEC1651784.aspx
 Which CA Spectrum 9.2.3.H12 PTF patches are included in 9.2.3.H13?


--
Rene'

Rene' Cantwell
CA Technologies
Support Delivery Manager
603-334-2497
rene.cantw...@ca.commailto:rene.cantw...@ca.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Mobile Application

[Bohra, Saurabh]

Has anyone used the Spectrum Mobile Application. I am evaluating this and the 
alarms seems to be not consistent... initially only mls alarms were visible and 
after several refreshes to the app had some more alarms form different DSS, 
however they would disappear quickly. Per doc there should to latest 100 
alarms, however that does not seems to be the case also.


https://wiki.ca.com/display/CASP941/Spectrum+Mobile+Application




Saurabh Bohra
Sr. Network Mgmt Systems Analyst
ESPN Inc.
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Config Comparison

[Jon Magnus Dullerud]

Hi.
In the $SPECROOT/tomcat/webapps/spectrum/ there is a diff.applet file.
Take a look at that, dont know how it works, but i suspect it has something 
with configs to do.

/jon magnus

 
 27. jan. 2015 kl. 14.07 skrev kavi arasu kaviaras...@gmail.com:
 
 Hi All,
 
 Does any one know how spectrum compares the configuration and highlights the 
 differences like added lines removed lines and changed lines.
 
 Is that done by any perl file?. If so, please provide me the file responsible 
 for it.
 
 Thanks,
 Kavi
 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum dulle...@gmail.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Config Comparison

[kavi arasu]

Hi All,

Does any one know how spectrum compares the configuration and highlights the 
differences like added lines removed lines and changed lines.

Is that done by any perl file?. If so, please provide me the file responsible 
for it.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum 9.3 Installation Problem

[Tugrul Gurkaynak | SUPERCOM]

Hello,

I've encountered same problem and find out it was due to windows installation 
locale. Can't remember what was the exact reason, but it was something about 
either decimal separator dot/comma difference or some bug due to Turkish 
uppercase i difference.

Please try reinstalling windows with leaving both Language to install and 
Time and currency format as the default English (United States)

you can select any Keyboard or input method as you wish, though.

that worked for me


have a nice day
Tuğrul Gürkaynak


From: spectrum@listserv.unc.edu [spectrum@listserv.unc.edu] on behalf of Mehmet 
HAZIROL [mehmet.hazi...@arkas.com.tr]
Sent: Friday, September 19, 2014 12:10 AM
To: spectrum
Subject: [spectrum] Spectrum 9.3 Installation Problem

Dear all,
I downloaded Spectrum 9.3 and OneClick from support. I want to try install them 
to seperate servers. Spectrum installation finished succesfully, log out and 
login after installation. When I want to start Spectroserver on Spectrum 
Control panel, I get an error message like below while . I check server specs 
for requiremets and there is no problem about them.
How can I pass this error?

[cid:image003.jpg@01CFD39E.284619D0]

Also, which steps of installation I will insert license information? There is 
no screen that ask me license information.

Regards

Mehmet Uğur HAZIROL
Arkas Holding S.A.
Network Support Specialist
Phone: 0090 (0232) 477 
Fax : 0090 (0232) 411 
E-Mail: mehmet.hazi...@arkas.com.trmailto:mehmet.hazi...@arkas.com.tr
www.arkas.com.trhttp://www.arkas.com.tr/


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
tugrul.gurkay...@supercom.com.tr
YASAL UYARI / DISCLAIMER
Bu mesajda, Yalnızca muhatabını ilgilendiren, kişiye veya kuruma özel bilgiler 
yer alıyor olabilir. Mesajin muhatabı değilseniz,içeriğini ve varsa ekindeki 
dosyaları kimseye aktarmayınız ya da kopyalamayınız. Böyle bir durumda lütfen 
göndereni uyarıp, mesaji imha ediniz. Şirketimiz bu mesajın içerdiği bilgilerin 
doğruluğu veya eksiksiz olduğu konusunda herhangi bir garanti vermemektedir. Bu 
nedenle bu bilgilerin ne şekilde olursa olsun içeriğinden, 
iletilmesinden,alınmasından ve saklanmasından sorumlu değildir. Bu mesajdaki 
görüşler yalnızca gönderen kişiye aittir ve şirketimizin görüşlerini 
yansıtmayabilir. Göstermiş olduğunuz hassasiyetten ötürü teşekkür ederiz.

The information contained in this e-mail, including any attachments, is 
confidential and intended solely for the individual(s) stated in this message. 
If you are not the intended recipient, please notify the sender and destroy 
this message. The company shall have no liability for content, accuracy, 
transmission,reception, storage, loss of integrity and confidentiality of this 
message,contained viruses and any damages caused in any way to your computer 
system or use of such in any way whatsoever. Any opinions expressed in this 
message and its attachments are those of the author and may not necessarily 
reflect the opinions of the company.
[http://www.supercom.com.tr/img/uploads/kagit_basma.jpg]

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 9.3 Installation Problem

[Mehmet HAZIROL]

Dear all,
I downloaded Spectrum 9.3 and OneClick from support. I want to try install them 
to seperate servers. Spectrum installation finished succesfully, log out and 
login after installation. When I want to start Spectroserver on Spectrum 
Control panel, I get an error message like below while . I check server specs 
for requiremets and there is no problem about them.
How can I pass this error?

[cid:image003.jpg@01CFD39E.284619D0]

Also, which steps of installation I will insert license information? There is 
no screen that ask me license information.

Regards

Mehmet Uğur HAZIROL
Arkas Holding S.A.
Network Support Specialist
Phone: 0090 (0232) 477 
Fax : 0090 (0232) 411 
E-Mail: mehmet.hazi...@arkas.com.trmailto:mehmet.hazi...@arkas.com.tr
www.arkas.com.trhttp://www.arkas.com.tr/


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum 9.3 Installation Problem

[Christian Schneider]

Hi,

As of 9.3 you will no longer need to provide a license key. This part is ok. I 
would try to install again over it.

Regards

Christian Schneider
Enterprise Service Specialist

4-tune GmbH
Sägereistrasse 33
CH-8152 Glattbrugg

Tel   +41 71 930 07 00
Fax  +41 71 930 07 01
Mob +41 79 418 45 42
Mail christian.schnei...@4-tune.ch

 Am 18.09.2014 um 23:10 schrieb Mehmet HAZIROL mehmet.hazi...@arkas.com.tr:
 
 Dear all,
 I downloaded Spectrum 9.3 and OneClick from support. I want to try install 
 them to seperate servers. Spectrum installation finished succesfully, log out 
 and login after installation. When I want to start Spectroserver on Spectrum 
 Control panel, I get an error message like below while . I check server specs 
 for requiremets and there is no problem about them.
 How can I pass this error?
  
 image003.jpg
  
 Also, which steps of installation I will insert license information? There is 
 no screen that ask me license information.
  
 Regards
  
 Mehmet Uğur HAZIROL
 Arkas Holding S.A.
 Network Support Specialist
 Phone: 0090 (0232) 477 
 Fax : 0090 (0232) 411 
 E-Mail: mehmet.hazi...@arkas.com.tr
 www.arkas.com.tr
  
 --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum christian.schnei...@4-tune.ch

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Integration with HP Operations Manager for UNIX (OMU)

[kavi arasu]

Hi All, 

Please let us know whether its possible to integrate Spectrum with HP 
Operations Manager for UNIX (OMU), if yes, Please provide us the reference 
document for integrating the same. 

Also, let us know whether we can get the MIB's for the same. 

Regards, 
Kavi 
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Integration with HP Operations Manager for UNIX (OMU)

[Stephen Boshoff]

Hi There
If you get an answer to this please share it with me as well


Kind regards

Stephen Boshoff

T-Systems South Africa (Pty) Ltd
Delivery
Stephen Boshoff
Team Leader: ESM
International Business Gateway, New Road, Midrand, 1685
P O BOX 2496,Midrand,1685
+27(10)221-6353 (Phone)
+27(86)642-3243 (Fax)
+27(83)390-7700 (Mobile)
E-mail: stephen.bosh...@t-systems.co.za
http://www.t-systems.co.za
Registration Number:  1989/007547/07


-Original Message-
From: spectrum@listserv.unc.edu [mailto:spectrum@listserv.unc.edu] On Behalf Of 
kavi arasu
Sent: 16 September 2014 11:19 AM
To: spectrum
Subject: [spectrum] Spectrum Integration with HP Operations Manager for UNIX 
(OMU)

Hi All,

Please let us know whether its possible to integrate Spectrum with HP 
Operations Manager for UNIX (OMU), if yes, Please provide us the reference 
document for integrating the same.

Also, let us know whether we can get the MIB's for the same.

Regards,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum stephen.bosh...@t-systems.co.za


Disclaimer: This message and/or attachment(s) may contain privileged, 
confidential and/or personal information. If you are not the intended recipient 
you may not disclose or distribute any of the information contained within this 
message. In such case you must destroy this message and inform the sender of 
the error. T-Systems does not accept liability for any errors, omissions, 
information and viruses contained in the transmission of this message. Any 
opinions, conclusions and other information contained within this message not 
related to T-Systems' official business is deemed to be that of the individual 
only and is not endorsed by T-Systems.

This message and/or attachment(s) may contain privileged or confidential
 
information. If you are not the intended recipient you may not disclose or  
  
distribute any of the information contained within this message. In such
case you must destroy this message and inform the sender of the error.
T-Systems does not accept liability for any errors, omissions, information
and viruses contained in the transmission of this message. Any opinions, 
conclusions and other information contained within this message not related 
to T-Systems' official business is deemed to be that of the individual only 
and is not endorsed by T-Systems.

  
T-Systems - Business Flexibility

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Admin Position

[Robert]

We have a Spectrum Admin position open in our shop in Austin, Texas. We 
have much of the CA Service Assurance tools and leverage SystemEDGE and 
VAIM as components to enhance Spectrum's content. We have a modern 
network infrastructure, and ticket to the Network Staff from Spectrum 
with good success.


The position is a annually renewing contractor position that could be 
remote for the right candidate.


Please ping me if interested.

Thanks

-Robert Borowicz
Austin, Texas

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum dismantle distributed Fault Tolerance two server concept. request advice

[De Munter, Erwin]

Hi  All,


In my long carrier of Spectrum administration we have set up several fault 
tolerance and distributed  environments,  based on  manuals on the fly

Today I have to, for special reason,  dismantle a full functional  two server 
environment, consisting  of a primary and secondary SS server into two 
independent Primary servers, with the goal to use the old secondary for testing 
upgrade to 9.3, and start virtualization migration.

So my thought of dismantle fault tolerance was the opposite flow then setting 
up fault tolerance.   But something is missing, resulting in issue with naming 
service when starting location server

Replaced host names to something readable,  and only displayed relevant 
information



check cronjobs specuser/root  secundary server

ok


[specuser@secondaryserver SS-Tools]$ ./MapUpdate -remove 0x400 -precedence 
20

ok



Connecting to Location Server running at: secondaryserver port 0xdaff
Connecting to SpectroSERVER running at: primaryserver port 0xbeef
Successfully switched connection.
Found model: primaryserver, of type:  LocalLscpe
  loaded on VNM  primaryserver  (primaryserver) port 0xbeef precedence 10
Not updating the Loaded Landscape List.
These landscapes are being unloaded:

Landscape   Service Type Name  Hostname   Port   Precedence
-   -- -- -- --
0x400   Landscape Default  secondaryserver0xbeef 20
0x400   Landscape  secondaryserver0xbeef 20
Map update verified.


[specuser@primaryserver SS]$ /spectrum/SS-Tools/StartOnlineBackup -lh 0x400

ok


[specuser@primaryserver SS]$ scp /data/SS-DB-Backup/db_20140214_0928.SSdb.gz 
secondaryserver:/data/SS-DB-Backup/db_20140214_0928.SSdb.gz

ok


[specuser@secondaryserver SS]$ gunzip 
/data/SS-DB-Backup/db_20140214_0928.SSdb.gz

ok


[specuser@secondaryserver bin]$ ./stopSS.pl

ok


/spectrum/SS-Tools/SSdbload -il -new_primary secondaryserver -replace 10 
/data/SS-DB-Backup/db_20140214_0928.SSdb

ok


[specuser@ secondaryserver SS]$ /spectrum/SS-Tools/SSdbload -il -new_primary 
secondaryserver -replace 10 /data/SS-DB-Backup/db_20140214_0928.SSdb
The specified save file: /data/SS-DB-Backup/db_20140214_0928.SSdb,
was created with the following options:
-c (catalog)
-m (models)and indicates these landscapes loaded on these servers:

Landscape   Hostname  PortPrecedence
--    --  --
0x400   secondaryserver0xbeef  10

 Do you really want to initialize the database? (Y or N): Y

Initializing database...
Reading new catalog from /data/SS-DB-Backup/db_20140214_0928.SSdb...
Number of model types read  : 4799
Number of relations read  : 189
Validating new catalog...
Writing new catalog to the database.
Please be patient...
Loading new models into the database.
Number of models loaded  : 250860
The database now indicates these landscapes loaded on these servers:
Landscape   Hostname  PortPrecedence
--    --  --
0x400   secondaryserver0xbeef  10
Database landscape handle is 256 (0x400)
Note -  warning/informational messages written to SSdbload.log.
SSdbload completed successfully.


ISSUE;Above seem to be ok.   Primary (prod) server seems to ok, updated 
correct map, and no impact.The new primary, separated SS on  
secondaryserver  starts fine, as intended with locale location server, and 
dbload new primary and precedence.   But connection via vnmsh connect or OC is 
not working.  Seems issue with the Naming service that the location server 
needs..


[specuser@secondaryserver LS]$ cat LOCSERV.OUT



**
The following output is intended to facilitate debugging, please forward
to CA technical support.  The files listed are not part of the customer
installation of SPECTRUM.
**

Feb 14 13:07:03 ERROR at CsCorbaMgr.cc(1120): Failed to connect to CORBA Naming 
Service on corbaloc:: secondaryserver:14006/NameService, will retry in 5 
seconds.

/spectrum/LS/LocServer is now ready on port 0xdaff...

Anyone any idea what I have could have being missed, or did wrong?

Best regards,


Met vriendelijke groeten, | Best regards, | Bien à vous,

De Munter Erwin
Business technologist  Network   Operations Mngnt
Tel:+32 2 431 30 93
Mobile:   +32 473974699

[antenna] on4cgd - jo21if
erwin.de_mun...@atos.netmailto:erwin.de_mun...@atos.net
Atealaan 34
B-2200 Herentals
http://www.atos.nethttp://www.atos.net/
[Atos_Olympic_Games_Logo_signature]





---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.gifinline: 

RE:[spectrum] Spectrum 9.3.H01 - were is it?

[Joseph POUTRE]

Roberth,

On the CA Support site go to the Support By Product page for the information, 
under Latest Knowledge Base Updates.

Joe

-
[cid:image001.gif@01CDF96F.379E9C00]
Joseph Poutre
AVP
ITIP - Production Tools
525 Washington
Jersey City
Tel : (201) 850-4179
Mobile: (917) 361-3211
joseph.pou...@us.bnpparibas.com



From: roberth.edb...@seb.se [mailto:roberth.edb...@seb.se]
Sent: Thursday, February 13, 2014 7:36 AM
To: spectrum@listserv.unc.edu
Subject: [spectrum] Spectrum 9.3.H01 - were is it?

I think I read about H01 for 9.3 was released recently, but I can't find it.
/Roberth

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
joseph.pou...@us.bnpparibas.commailto:joseph.pou...@us.bnpparibas.com


This message and any attachments (the message) is intended solely for 
the addressees and is confidential. If you receive this message in error, 
please delete it and immediately notify the sender. Any use not in accord 
with its purpose, any dissemination or disclosure, either whole or partial, 
is prohibited except formal approval. The internet can not guarantee the 
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) 
not therefore be liable for the message if modified. Please note that certain 
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.png

[spectrum] Spectrum Vcenter Modeling - access datacenter info in attribute

[Dan Ellsweig/RYE/US]

Greetings

We are running Spectrum 9.3 and managing multiple Vcenters using the Sysedge 
VMware AIM.

My Vcenter team has done considerable work in defining data centers and 
environments within the Vcenter. The environments can be as simple as 
production, qa, or dev.

I have a need to create Global collections in Spectrum that contain just prod 
Vm's for a given datacenter.  I cannot find an attribute that has the names of 
the datacenter or environement. There are other examples of topography strings 
- LocationModelNameString, TopologyModelNameString and 
collectionsModelNameSrtring are good examples of this.

Does anyone have an idea on how to accomplish this??


[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.com

Please consider the environment before printing



  *

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum Vcenter Modeling - access datacenter info in attribute

[Chandler, Bradford]

I've used the Asset Information under the Component Details, such as Tag 
(USER_AssetTag 0x12bfb) and ID (USER_AssetID) to fill in environment and owner. 
 You could also use Office (USER_AssetOffice 0x12bff) or Organization 
(USER_AssetOrganization 0x12bfe) for the data center name.

We don't use VAIM, but I'm assuming it could be used in the same way:  when a 
new server gets built, we use the web services to automatically populate these 
fields above from the information that the customer fills out including the 
data center and environment.

Brad

From: Dan Ellsweig/RYE/US [mailto:dan.ellsw...@avon.com]
Sent: Wednesday, February 12, 2014 7:22 AM
To: spectrum
Subject: [spectrum] Spectrum Vcenter Modeling - access datacenter info in 
attribute

Greetings

We are running Spectrum 9.3 and managing multiple Vcenters using the Sysedge 
VMware AIM.

My Vcenter team has done considerable work in defining data centers and 
environments within the Vcenter. The environments can be as simple as 
production, qa, or dev.

I have a need to create Global collections in Spectrum that contain just prod 
Vm's for a given datacenter.  I cannot find an attribute that has the names of 
the datacenter or environement. There are other examples of topography strings 
- LocationModelNameString, TopologyModelNameString and 
collectionsModelNameSrtring are good examples of this.

Does anyone have an idea on how to accomplish this??


[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

Please consider the environment before printing


*
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum Vcenter Modeling - access datacenter info in attribute

[Dan Ellsweig/RYE/US]

The problem with this approach is it requires manual intervention for thousands 
of virtual devices - updating the asset info.

Using an attribute such as one of the namestrings defined in my OP would allow 
this information to come automatically from the Vcenter via the VAIM plugin to 
Sysedge.



[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.com

Please consider the environment before printing



From: Chandler, Bradford [mailto:brad.chand...@libertymutual.com]
Sent: Wednesday, February 12, 2014 8:51 AM
To: Dan Ellsweig/RYE/US; spectrum
Subject: RE: Spectrum Vcenter Modeling - access datacenter info in attribute

I've used the Asset Information under the Component Details, such as Tag 
(USER_AssetTag 0x12bfb) and ID (USER_AssetID) to fill in environment and owner. 
 You could also use Office (USER_AssetOffice 0x12bff) or Organization 
(USER_AssetOrganization 0x12bfe) for the data center name.

We don't use VAIM, but I'm assuming it could be used in the same way:  when a 
new server gets built, we use the web services to automatically populate these 
fields above from the information that the customer fills out including the 
data center and environment.

Brad

From: Dan Ellsweig/RYE/US [mailto:dan.ellsw...@avon.com]
Sent: Wednesday, February 12, 2014 7:22 AM
To: spectrum
Subject: [spectrum] Spectrum Vcenter Modeling - access datacenter info in 
attribute

Greetings

We are running Spectrum 9.3 and managing multiple Vcenters using the Sysedge 
VMware AIM.

My Vcenter team has done considerable work in defining data centers and 
environments within the Vcenter. The environments can be as simple as 
production, qa, or dev.

I have a need to create Global collections in Spectrum that contain just prod 
Vm's for a given datacenter.  I cannot find an attribute that has the names of 
the datacenter or environement. There are other examples of topography strings 
- LocationModelNameString, TopologyModelNameString and 
collectionsModelNameSrtring are good examples of this.

Does anyone have an idea on how to accomplish this??


[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

Please consider the environment before printing


*
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum Vcenter Modeling - access datacenter info in attribute

[Dan Ellsweig/RYE/US]

Thanks for the response..

I did something similar - did a search and added to GC - BUT what I am looking 
for is a way to use the datacenter data in a GC rule - so this GC becomes real 
time - no manual intervention. Our VM environment is dynamic enough I need to 
automate this



[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.com

Please consider the environment before printing



From: Franck, Raphael [mailto:raphael.fra...@computacenter.com]
Sent: Wednesday, February 12, 2014 9:36 AM
To: spectrum
Subject: [spectrum] AW: Spectrum Vcenter Modeling - access datacenter info in 
attribute

Hi Dan,

basically it comes down to relational searches within OneClick, which still 
can't be defined by ourselves unfortunately.
However, there a few of them predefined, like Devices - Supports Application 
or Virtual Host Management - VMware - Virtual Machines - By Datacenter 
Name.
You might use the function to create GlobalCollections based on Locater 
searches.
Please see the attached picture as a starting point.
Beware, there is a little bug when using a list of values (e.g. a list  of 
VMware Datacenter names): once the search/Global Collection I saved and shall 
be re-edited, it will not show the previously entered list of values. But these 
values are still stored within the system, so it's mainly an issue with 
remembering what you previously entered.


Mit freundlichen Gruessen - Yours sincerely

Raphael Franck
Consultant
Group Operations Service Factory

Computacenter AG  Co oHG
Services  Solutions

Europaring 34-40, 50170 Kerpen, Germany
E-Mail: 
raphael.fra...@computacenter.commailto:raphael.fra...@computacenter.com
WWW: www.computacenter.dehttp://www.computacenter.de/

Von: Dan Ellsweig/RYE/US [mailto:dan.ellsw...@avon.com]
Gesendet: Mittwoch, 12. Februar 2014 13:22
An: spectrum
Betreff: [spectrum] Spectrum Vcenter Modeling - access datacenter info in 
attribute

Greetings

We are running Spectrum 9.3 and managing multiple Vcenters using the Sysedge 
VMware AIM.

My Vcenter team has done considerable work in defining data centers and 
environments within the Vcenter. The environments can be as simple as 
production, qa, or dev.

I have a need to create Global collections in Spectrum that contain just prod 
Vm's for a given datacenter.  I cannot find an attribute that has the names of 
the datacenter or environement. There are other examples of topography strings 
- LocationModelNameString, TopologyModelNameString and 
collectionsModelNameSrtring are good examples of this.

Does anyone have an idea on how to accomplish this??


[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

Please consider the environment before printing



  *

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
raphael.fra...@computacenter.commailto:raphael.fra...@computacenter.com

---
Computacenter AG  Co. oHG, mit Sitz in Kerpen (Amtsgericht Köln HRA 18096)
Vertretungsberechtigte Gesellschafter:
Computacenter Aktiengesellschaft, mit Sitz in Köln (Amtsgericht Köln HRB 28384)
Vorstand: Tony Conophy
Aufsichtsrat: Michael Norris (Vorsitzender)
Computacenter Management GmbH, mit Sitz in Köln (Amtsgericht Köln HRB 28284)
Geschäftsführer: Dr. Karsten Freihube, Dr. Christine Haupt, Reiner Louis, 
Thomas Jescheck, Nils Scheller
Visit us on the Internet: http://www.computacenter.de
Visit our Online-Shop: https://shop.computacenter.de

This email is confidential. If you are not the intended recipient, you must not 
disclose or use the information contained in it. If you have received this mail 
in error, please tell us immediately by return email and delete the document.
---



  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

[spectrum] Spectrum Hotfix patch H01 for 9.3 - fixes and enhancements

[Cantwell, Rene D]

Newly published knowledgebase doc TEC605904 Spectrum Hotfix patch H01 for 9.3 - 
fixes and enhancements is now available.

Due to the number of fixes and enhancements included in the release note, the 
knowledgebase doc is published in 2 parts.  Please be sure to review both parts 
as a preview of what will be coming with H01.



TEC605904

Title:  Spectrum Hotfix patch H01 for 9.3 - fixes and enhancements - part 
1https://support.ca.com/irj/portal/kbtech?docid=605903searchID=TEC605903

Title:  Spectrum Hotfix patch H01 for 9.3 - fixes and enhancements - part 
2https://support.ca.com/irj/portal/anonymous/kbtech?searchID=TEC605904docid=605904bypass=yesfromscreen=kbresults


--
Rene'


Rene' Cantwell
CA Technologies
Support Delivery Manager
603-334-2497
rene.cantw...@ca.com



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum log management

[Fereydoon Mallahi Karai]

Hi,

I want to know what specific activities are logged in Spectrum and where
those log files are stored and if there is any solution for having a daily
backup of those log files for having a long time history.

Thank you,

Regards,

Ferey

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum log management

[Chandler, Bradford]

There's an entry that you can add to the the ~SPECROOT/SS/.vnmrc file that you 
can set to true:

log_user_events=true

which will give you user events against devices.  E.g. user a changed the 
community string, updated an attribute, etc.

This can add quite a few events to your database so keep that in mind, but you 
could then run event reports for the specific events that you are looking for 
if you have Spectrum Report Manager.

The other place that logins/logouts can be tracked is on the OneClick server 
under ~specroot/OCLogs/client.log.  These are specific to the OneClick logins 
and logouts.

Brad

From: Fereydoon Mallahi Karai [mailto:fmall...@gmail.com]
Sent: Thursday, January 09, 2014 12:23 PM
To: spectrum
Subject: [spectrum] Spectrum log management

Hi,

I want to know what specific activities are logged in Spectrum and where those 
log files are stored and if there is any solution for having a daily backup of 
those log files for having a long time history.

Thank you,

Regards,

Ferey
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Directory watcher

[Ami R Patel]

Does anyone know what the correct syntax is to add a Directory watcher to
self monitor table to watch for file count in the given directory?

Thanks,
Ami

This is a PRIVATE message. If you are not the intended recipient, please
delete without copying and kindly advise us by e-mail of the mistake in
delivery.
NOTE: Regardless of content, this e-mail shall not operate to bind CSC to
any order or other contract unless pursuant to explicit written agreement
or government initiative expressly permitting the use of e-mail for such
purpose.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re:[spectrum] Spectrum DB save file will not decompress

[Dwight Antonio Spence]

There was a corrupted .idb file that caused the issue with the reload.  Thank 
you for all for your assistance.


On Dec 16, 2013, at 12:39 PM, Dwight Antonio Spence 
dwight.spe...@xassurance.com wrote:

 Good Afternoon,
 
 Anyone experience a Spectrum db save file that will not decompress for a db 
 restore, before?
 
 solutions??
 
 
 D. Spence


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum DB save file will not decompress

[Dwight Antonio Spence]

Good Afternoon,

Anyone experience a Spectrum db save file that will not decompress for a db 
restore, before?

solutions??


D. Spence
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

AW: [spectrum] Spectrum DB save file will not decompress

[Nolz Andreas]

Hello,

do you run save and load with the same user?

Andreas

-Ursprüngliche Nachricht-
Von: Dwight Antonio Spence [mailto:dwight.spe...@xassurance.com] 
Gesendet: Montag, 16. Dezember 2013 18:40
An: spectrum
Betreff: [spectrum] Spectrum DB save file will not decompress

Good Afternoon,

Anyone experience a Spectrum db save file that will not decompress for a db 
restore, before?

solutions??


D. Spence
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum andreas.n...@kapsch.net



The information contained in this e-mail message is privileged and confidential 
and is for the exclusive use of the addressee. The person who receives this 
message and who is not the addressee, one of his employees or an agent entitled 
to hand it over to the addressee, is informed that he may not use, disclose or 
reproduce the contents thereof, and is kindly asked to notify the sender and 
delete the e-mail immediately.


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 9.2.3 H12 is now officially released

[Cantwell, Rene D]

Spectrum 9.2.3 H12 is now officially released.

Please read the GA announcement from our product home page:

https://support.ca.com/phpdocs/7/7832/7832_r923H12_Announcement.pdf

Links to the H12 downloads are under the Spectrum r9.2 Solutions  Patches 
table at:

https://support.ca.com/irj/portal/anonymous/phpsupcontent?contentID={E8B81E0D-884E-4DA7-82D3-63ECE2EF1D61}https://support.ca.com/irj/portal/anonymous/phpsupcontent?contentID=%7bE8B81E0D-884E-4DA7-82D3-63ECE2EF1D61%7d

In addition, these are the MD5 checksum values for each of the H12 files:

9.2.3.H12 MD5 Checksums:

cb58b1b5fc08245e87e2d85e01e4c4bc *Spectrum_09.02.03.H12.87.dist.tgz

0b318fdbfcc0ba3d020b05175e78a212 *Spectrum_09.02.03.H12.87.Linux.txe

583db82264c4ee0e3ea338c4ec7e49ff *Spectrum_09.02.03.H12.87.Solaris.txe

8d8430963b3098c83dc3e84d59dbe078 *Spectrum_09.02.03.H12.87.Windows.exe




---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum 9.2.3 H12 released

[Keßler , Christoph]

Hi list,

CA release Spectrum 9.2.3 HotFix 12 last night. The files can be found on the 
CA FTP.

Regards,
  Christoph 

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Boxi integration issue

[J Dhiwakar]

Hi All,

Recently I have done a failover in spectrum. Switching back to secondary after 
10 days , I am unable see outages for the 10 days.

I am unable to generate BOXI reports for those 10 days. Can anyone please help 
me?

Regards,

Dhiwakar J
Assistant Manager - Data Centre Operations
National Payments Corporation of India |Chennai.
Tel. No: 044 - 6696 6006|Mobile:+91 9840 509 440
[Description: Description: Description: Description: Description: Description: 
Description: Description: Description: Description: 
cid:image001.png@01CC2439.222CF810][Description: Description: Description: 
Description: Description: Description: Description: Description: 
cid:image004.jpg@01CD10F0.54191DA0]
[Description: Description: Description: Description: Description: Description: 
Description: Description: Description: Description: Description: Description: 
Description: cid:_1_07CE93FC07CE8CF00022009565257457][Description: Description: 
Description: Description: Description: Description: Description: Description: 
Description: Description: Description: cid:image002.jpg@01CB4533.55852970]
Save the Environment. Save Paper. Avoid printing of this mail unless 
necessary ü







 IMPORTANT NOTICE: Information contained and transmitted by this EMAIL 
including any attachment is proprietary to NPCI and is intended solely for the 
addressee/s, and may contain information that is privileged, confidential or 
exempt from disclosure under applicable law. Access to this email and/or to the 
attachment by anyone else is unauthorized. If this is a forwarded message, the 
content and the views expressed in this EMAIL may not reflect those of the 
NPCI. If you are not the intended recipient, an agent of the intended recipient 
or a person responsible for delivering the information to the named recipient, 
you are notified that any use, distribution, transmission, printing, copying or 
dissemination of this information in any way or in any manner is strictly 
prohibited.

If you are not the intended recipient of kindly delete this email from your 
system and inform the sender. There is no guarantee that the integrity of this 
communication has been maintained and nor is this communication free of 
viruses, interceptions or interference.



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.pnginline: image002.jpginline: image003.gifinline: image004.jpg

RE:[spectrum] Spectrum replacing WA_Links with Provider_Cloud models

[David Game]

Have a look at the Enterprise VPN Manager on each landscape and check:

1) Discover On Activation = No
2) Create on Trap = No
3) Enable Background Discovery = No

However if you're running BGP across the links, Provider Cloud is the method 
Spectrum uses to model a BGP link.  For our purposes it works quite well 
provided you get the ASN mapping set up correctly so you don't end up with 20+ 
Cloud models for the same provider just because they're using more than one ASN.

Also look into using proxy models to model your links instead of one armed 
bandit connections.  Model both end routers on each Spectroserver, but set the 
A end of one of them to be a Proxy Model on the first Spectroserver and the B 
end as a proxy model on the other Spectroserver. That way you'll get full 
connectivity modelled across your multiple landscapes when you use WA_Links or 
direct links.

David K. Game
Consultant - Managed Services
Logicalis UK Ltd

110 Buckingham Avenue
Slough, Berkshire, SL1 4PF
www.uk.logicalis.com
_
Business and technology working as one


-Original Message-
From: Funk, Bruce D CIV (US) [mailto:bruce.d.funk@mail.mil] 
Sent: 19 July 2013 17:17
To: spectrum
Subject: [spectrum] Spectrum replacing WA_Links with Provider_Cloud models

We are running 9.2.3.10.
We have two Spectro servers, each polling half the network.   As the network is 
richly connected, we have many  circuits that cross spectroserver polling 
boundaries, so our technique is to model each half of such a circuit on each 
spectroserver (so that you have a bunch of one-armed bandit wa_links, and 
then model them together on a global collection.  All of these links are 
tunnels.

Recently, Spectrum has started automatically replacing the wa_link models with 
provider_cloud models (we are doing bgp across these links as they connect the 
various regions of our network).

Today, I went in and destroyed all the provider_cloud models, did discover 
connections on all the  relevant devices, and the WA_Links were created just 
fine.  Then this evening, poof! All the single ended wa_links are converted 
into provider_clouds.  Does not appear to happen on Wa_links on physical ports, 
just tunnels.  The event log says it was created by a unser initiated 
discovery.

We really need to see the wa_link for each tunnel.
How can I get Spectrum to stop this behavioiur?

Thanks in advance.
-B_


Bruce D. Funk
Technical Director
European Theater NOSC, G3, 5th Signal Command (Theater)
DSN: (314) 380-4035   Commercial +49 621 730 4035
Cell:  +49 162 296 0186
VoSIP:  (304) 380-4035  (not always online)



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum david.g...@uk.logicalis.com

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com 
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum/Ciscoworks (Prime) Position Open

[Sobrinho, John]

Hello List..

I am looking for Intermediate level Spectrum and or CiscoWorks (Prime) 
Application Specialist Engineer to help continue drive efficiencies through our 
investments made on our CA Tools, and Cisco platforms.
There is some flexibility with in the team to specialize in one of the 
applications and be a functional back up for the other application.

Looking to hire first week of June.. Relocation costs will not be provided.
Essential:
- good knowledge of SNMP
- scripter guru for ehealth, spectrum or scripter guru for network change 
management- perl, shell, Soap, XML, CLI, RegX, TCL etc..
- unix window admin
- some sql, hhtp
- must have some cisco creds, ccna - if not they will have to get it with in 6 
month on their time and dime
- univ grad perferred but not required.

 Official external link  to position description,
https://performancemanager4.successfactors.com/sfcareer/jobreqcareer?jobId=29285company=RBCusername=
Thanks...



John Sobrinho | Manager | Distributed Network Configuration Management | RBC 
Royal Bank of Canada | T: 416.348.4391 | F: 416.348.5934


___

This email may be privileged and/or confidential, and the
sender does not waive any related rights and obligations.
Any distribution, use or copying of this email or the
information it contains by other than an intended recipient
is unauthorized. If you received this email in error,
please advise the sender (by return email or otherwise)
immediately. You have consented to receive the attached
electronically at the above-noted email address; please retain a
copy of this confirmation for future reference.

Ce courriel est confidentiel et protégé. L'expéditeur ne renonce
pas aux droits et obligations qui s'y rapportent. Toute diffusion,
utilisation ou copie de ce courriel ou des renseignements qu'il
contient par une personne autre que le (les) destinataire(s)
désigné(s) est interdite. Si vous recevez ce courriel par erreur,
veuillez en aviser l'expéditeur immédiatement, par retour de courriel
ou par un autre moyen. Vous avez accepté de recevoir le(s) document(s)
ci-joint(s) par voie électronique à l'adresse courriel indiquée ci-dessus;
veuillez conserver une copie de cette confirmation pour les fins de reference 
future.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Monitor any filesystem?

[Jonas Henrique]

Hi,
how to enable the monitoring of all disks at once?
I do not want to manually add a hard disk.

Att,
Jonas Gomes

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Sysedge and SPM Test on HTTP--HTTPS Redirects

[nikhil mehra]

Hello,

Has anyone ever created a SPM test using sysedge and SPM (v 5.7 or later)
where in the test is to check on HTTP URL availability but the URL itself
redirects to HTTPS ?

Does SPM supports redirection logic?

Any help/suggestion would be appreciated.


Thanks,
-- 
Nikhil Mehra

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Sysedge and SPM Test on HTTP--HTTPS Redirects

[Hilmar Preuße]

Hi,

Yes, SPM supports redirection in general. I'm pretty sure a redirection from
HTTP to HTTPS works too.

H.

On 18.03.2013 07:32, nikhil mehra wrote:
 Hello,

 Has anyone ever created a SPM test using sysedge and SPM (v 5.7 or later) 
 where 
 in the test is to check on HTTP URL availability but the URL itself redirects 
 to 
 HTTPS ?

 Does SPM supports redirection logic?

 Any help/suggestion would be appreciated.


 Thanks,
 -- 
 Nikhil Mehra


   * --To unsubscribe from spectrum, send email to lists...@unc.edu
 mailto:lists...@unc.edu with the body: unsubscribe spectrum 
 preu...@amasol.de 

-- 

Hilmar Preuße
amasol AG
Senior Consultant
Campus Neue Balan
Tel   +49 89 1894743-18
Claudius-Keller-Straße 3b
Fax   +49 89 1894743-99
D-81669 München
eMail preu...@amasol.de
http://www.amasol.de/


amasol Aktiengesellschaft für Informations- und Kommunikationstechnologie
Aufsichtsrat: Prof. Dr. Stephan Kaiser (Vorsitzender)
Vorstand: Wolfgang Bachmann, Stefan Deml, Thomas Dirsch, Frank Jahn
  Johann Maurer
Amtsgericht München HRB 128327, Sitz der Gesellschaft München

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Monitoring Date and Time?

[Jonas Henrique]

Hi,
I can monitor the date and time or just time using Spectrum?
how to make

Tks

Jonas Gomes

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Monitoring Date and Time?

[Jonas Henrique]

Hi,
I would like to monitor the time a servidorX this CASystemEDGE.
If the time is different from my Spectrum Server generate an alarm

2013/2/20 Jason Hebron jason.heb...@gmail.com

 Not sure exactly what you mean, can you expand your request further?

 On 21 February 2013 09:28, Jonas Henrique jonas...@gmail.com wrote:

 Hi,
 I can monitor the date and time or just time using Spectrum?
 how to make

 Tks

 Jonas Gomes

- --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum jason.heb...@gmail.com




---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Sizing

[Michael Votaw - ASI]

I would be interested in hearing some of the larger sites out there and how 
many devices and models you have on any one SpectroServer.  We are starting to 
experience stability issues and was wondering if we are perhaps sized 
improperly.

We are running CentOS with 4G Ram on a pretty nice ESXi server.  The ESXi 
server is at about half capacity.  We have around 200,000 models total with 
about 2000 devices.  We will be moving to Red Hat soon.

Can anybody comment on this?


Michael S. Votaw
5th Signal Command - ETNOSC
Senior Spectrum Analyst
michael.s.votaw@mail.mil

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum Sizing

[Chandler, Bradford]

We moved from Solaris to Linux (Redhat, HP DL380 G7 64bit, 48G RAM).

Our 'biggest' server has 7807 devices on it which equates to 152581 models.

We did a Spectrum sizing beforehand to confirm the size and whether it would 
handle the load.

CPU and memory hover around 15-20% and 7-10% respectively.

Brad

From: Michael Votaw - ASI [mailto:mich...@arcadiasecureit.com]
Sent: Tuesday, February 19, 2013 9:50 AM
To: spectrum
Subject: [spectrum] Spectrum Sizing

I would be interested in hearing some of the larger sites out there and how 
many devices and models you have on any one SpectroServer.  We are starting to 
experience stability issues and was wondering if we are perhaps sized 
improperly.

We are running CentOS with 4G Ram on a pretty nice ESXi server.  The ESXi 
server is at about half capacity.  We have around 200,000 models total with 
about 2000 devices.  We will be moving to Red Hat soon.

Can anybody comment on this?


Michael S. Votaw
5th Signal Command - ETNOSC
Senior Spectrum Analyst
michael.s.votaw@mail.milmailto:michael.s.votaw@mail.mil
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Antwort: [spectrum] Spectrum on SPARC T4 servers

[Christian Fieres]

Christoph,

I am running both my fault tolerant SpectroSERVERs and my two One Click 
servers along with 10+ other servers as Logical Domains (Oracle VM 2) on 
two T4's with 64 gig RAM each. From a CPU performance point of view, it is 
really a blessing compared to my old V240 and 440 boxes. I have assigned 
12 virtual CPUs and 12 GB memory to my primary SS and it is virtually 
doing *nothing* while running a lot more smooth than with the old 
hardware.

The only bottleneck is my local storage. We are running ZFS on four 600 
gig HDDs with RAID10 for the LDOM storage pool. In this case, make sure 
you assign enough memory and CPU power to your I/O domain or you will 
encounter huge performance problems with your drives. In my case, a whole 
CPU core and 8 to 12 GB memory seemed to do the job.

One problem though I do still have: My ArchMgr keeps dying when I do huge 
SQL accesses directly to the MySQL database. This didn't happen when I was 
on V440, but there is no explanation whatsoever why this should only 
appear on my new hardware; CA is still investigating.

Freundliche Grüße / Best regards

Christian Fieres

Mainova AG
Planung und Betrieb Infrastruktur (M3-ON2)
Service Operation Center
Solmsstraße 38
60623 Frankfurt

Telefon / Phone (069) 2 13-2 36 17
Mobil / Mobile (0170) 5 60 15 63
Telefax / Facsimile (069) 2 13-9 62 36 17
E-Mail c.fie...@mainova.de




Von:Keßler, Christoph kess...@amasol.de
An: spectrum spectrum@listserv.unc.edu
Datum:  07.02.2013 08:42
Betreff:[spectrum] Spectrum on SPARC T4 servers



Hi list,
 
anybody here using the Oracle T4 ? series as hardware platform for 
Spectrum?
One of my customers has to renew his hardware. At the moment he uses the 
M3000 servers from oracle, which is the official recommendation from CA.
My support request for the new T4 series was answered with ?CA doesn?t 
have any experience on this hardware and so the recommendation is still 
the M-series?.
 
I also asked a Oracle technician, who told me that the T4 series is a lot 
of better in single-threading than the old T2 series and should be a good 
choice for Spectrum.
Anybody here has some experience with the T4 series and Spectrum?
 
Regards
--
Christoph Keßler  amasol AG 
Senior Consultant Campus Neue Balan
Tel.  +49 89 1894743-24   Claudius-Keller-Straße 3 B
Fax   +49 89 1894743-99   D-81669 München
E-Mail kess...@amasol.de   http://www.amasol.de
 
amasol Aktiengesellschaft für Informations- und Kommunikationstechnologie
Aufsichtsrat: Prof. Dr. Stephan Kaiser (Vorsitzender)
Vorstand: Wolfgang Bachmann, Stefan Deml, Thomas Dirsch, Frank Jahn, 
Johann Maurer Amtsgericht München HRB 128327, Sitz der Gesellschaft 
München
 
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum c.fie...@mainova.de 


Mainova Aktiengesellschaft Solmsstraße 38 D-60623 Frankfurt am Main
Vorsitzende des Aufsichtsrates: Dr. h. c. Petra Roth, Oberbürgermeisterin 
a. D.
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Dr. Peter Birkner, 
Lothar Herbst, Dr. Marie-Luise Wolff-Hertwig
Sitz der Aktiengesellschaft: Frankfurt am Main Amtsgericht Frankfurt HRB 
7173 USt-ID-Nr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum on SPARC T4 servers

[Keßler , Christoph]

Hi list,

anybody here using the Oracle T4 - series as hardware platform for Spectrum?
One of my customers has to renew his hardware. At the moment he uses the M3000 
servers from oracle, which is the official recommendation from CA.
My support request for the new T4 series was answered with CA doesn't have any 
experience on this hardware and so the recommendation is still the M-series.

I also asked a Oracle technician, who told me that the T4 series is a lot of 
better in single-threading than the old T2 series and should be a good choice 
for Spectrum.
Anybody here has some experience with the T4 series and Spectrum?

Regards
--
Christoph Keßler  amasol AG
Senior Consultant Campus Neue Balan
Tel.  +49 89 1894743-24   Claudius-Keller-Straße 3 B
Fax   +49 89 1894743-99   D-81669 München
E-Mail kess...@amasol.demailto:kess...@amasol.de   
http://www.amasol.dehttp://www.amasol.de/

amasol Aktiengesellschaft für Informations- und Kommunikationstechnologie
Aufsichtsrat: Prof. Dr. Stephan Kaiser (Vorsitzender)
Vorstand: Wolfgang Bachmann, Stefan Deml, Thomas Dirsch, Frank Jahn, Johann 
Maurer Amtsgericht München HRB 128327, Sitz der Gesellschaft München


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum eHealth integration not fully discover devices

[Alexander R]

Hi list,
I've:
Spectrum 9.2.2.8.201
eHealth 6.3.0
RHEL 5.8 x86_64 (XEN VM)
Approximately 35 cisco (7600,6500,7200,3750,3600 and other common
devices) and juniper (ex4200,j4350,mx80) devices

I follow CA eHealth Performance Manager and CA Spectrum
Infrastructure Manager Integration and User Guide integration steps.
But after that, I've only one cisco device (7604 router) discovered in
eHealth and 700 ports (from other not discovered devices) discovered.

I've tried disabling integration and setup once again, but it not
solve this issue.

How to solve this?

Thanks

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] SPECTRUM and ZFS

[Christian Fieres]

Hi all,

I was wondering if anyone is running SPECTRUM in an ZFS environment on 
Solaris. I have migrated from dedicated Sun Fire V240 and V440 machines 
onto LDOMs on Oracle T4-1 servers recently and exprerience huge 
performance issues, mostly on my console (when SPECTRUM is running, Telnet 

sessions tend to be nasty in regards to response times), with CLI scripts 
and Locater searches. Everything else is running as fast as always.

I have granted my primary SS 12 GB of memory and 12 virtual CPUs. It 
cannot be a question of too little CPU power as my 12 CPUs virtually do 
nothing. I know, SS is a single thread application, but not even the CPU 
it uses grows more than 2 percent in usage. I haven't seen two-digit usage 

values so far.

What I have seen is that my memory is consumed up to 95 percent, due to my 

uncustomized ZFS cache settings. ZFS grabs nearly all memory and uses it 
as cache. My file system itself is a LDOM owned pool in a flat file that 
resided on a RAID-10-Pool on my T4 box.

Does my ZFS caching and huge DDM activities struggle for hard drive 
superiority? Does my server need to swap because ZFS cannot free memory as 

fast as a SPECTRUM process needs it? I think ZFS is a problem since a 
Perfomance View Health Report (which by the way says my server is 
helplessly busy) states 58 percent disk usage polls are over critical 
value and I have a current average disk utilization of 71 percent. My 
utilization graph on the Disk tab looks like a cardio graph with 
amplitudes at 100 percent on a more than regular basis.

I am aware there are ways to optimize ZFS caching. I have found actual 
best practice documents from Oracle (for an Oracle database environment, 
that is), so I guess there *are* applications that might need some 
optimization work on ZFS side.

Can anyone confirm this?

Freundliche Grüße / Best regards

Christian Fieres

Mainova AG
Planung und Betrieb Infrastruktur (M3-ON2)
Service Operation Center
Solmsstraße 38
60623 Frankfurt

Telefon / Phone (069) 2 13-2 36 17
Mobil / Mobile (0170) 5 60 15 63
Telefax / Facsimile (069) 2 13-9 62 36 17
E-Mail c.fie...@mainova.de


Mainova Aktiengesellschaft Solmsstraße 38 D-60623 Frankfurt am Main
Vorsitzende des Aufsichtsrates: Dr. h. c. Petra Roth, Oberbürgermeisterin 
a. D.
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Dr. Peter Birkner, 
Lothar Herbst, Dr. Marie-Luise Wolff-Hertwig
Sitz der Aktiengesellschaft: Frankfurt am Main Amtsgericht Frankfurt HRB 
7173 USt-ID-Nr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum. How do I check if my secondary spectroserver is being updated?

[Jon Magnus Dullerud]

Hi
I recently had to stop my Primary Spectroserver, when i started it again I got 
an alarm: CONTACT LOST TO SECONDARY SPECTROSERVER.
One of the reasons for this may be that the secondary spectroserver is being 
updated, wich is allright.
Now I want to check if this really is happening, how do I do that?

Best Regards
JOn Magnus
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum. How do I check if my secondary spectroserver is being updated?

[Cantwell, Rene D]

Hi Jon,

There will be events logged against the VNM model type for all of the database 
synch activity.

More information about the entire process can be found in the Database 
Management Guide, chapter 2.

--
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com


-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] 
Sent: Tuesday, December 11, 2012 5:32 AM
To: spectrum
Subject: [spectrum] Spectrum. How do I check if my secondary spectroserver is 
being updated?

Hi
I recently had to stop my Primary Spectroserver, when i started it again I got 
an alarm: CONTACT LOST TO SECONDARY SPECTROSERVER.
One of the reasons for this may be that the secondary spectroserver is being 
updated, wich is allright.
Now I want to check if this really is happening, how do I do that?

Best Regards
JOn Magnus
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum cantw...@aprisma.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum Alam about eHealth Manager

[Bohra, Saurabh]

Magno,

Which version of Spectrum are you running? There was a bug in Heartbeat.xml in 
9.2 SP1 release which was fixed in 9.2.2, that has been one of the cause of the 
problem. I was integrating another application and used heartbeat event rule 
and found out about this. Support provided me with the  new xml file which 
resolved the issue.

There was also another issue with the way ehealth integration happened and 
another patch was supplied to me - Spectrum_09.02.01.D306, check out the readme.

Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

From: Magno de Souza Lima [mailto:magno.l...@cassi.com.br]
Sent: Wednesday, November 21, 2012 2:32 PM
To: spectrum
Subject: [spectrum] Spectrum Alam about eHealth Manager

Hello,

In the console Spectrum I have received for the eHealth Manager alarms, the 
alarm follows:

Originating Event
--
Heartbeat from eHealth integration server has ceased, an alarm will be 
generated.

Probable Cause
--
EHEALTH INTEGRATION SERVER CONTACT LOST

SYMPTOMS:

eHealth discoveries are no longer being requested.
Web service based eHealth Live Alarms are not being generated in SPECTRUM.
eHealth element mappings are not being executed.

PROBABLE CAUSES:

1) The OneClick Integration server process has been disabled or has shut down.

RECOMMENDED ACTIONS:

1) Ensure that OneClick Integration server process is running.

2) Ensure that the OneClick server is configured in the Active role on the 
eHealth configuration Administration page.


I have reviewed the entire configuration, the connectors and communication, but 
found nothing wrong, someone can help me?

Regards,

Magno Lima
GTI – Suporte Técnico
• Tel :(61) 3212-5029
• magno.l...@cassi.com.brmailto:magno.l...@cassi.com.br



O conteúdo desta mensagem é de domínio da CASSI e seu sigilo protegido por lei.
Caso tenha sido enviada por equívoco, favor apagá-la e notificar o remetente.



 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com



Spectrum Software Release Notice

for

 CA Spectrum® Infrastructure Manager (CA Spectrum)

  05/14/2012

 Revision 1.0

 09.02.01.D306



#  #
#   IMPORTANT: #
#   This software release is provided as an interim#
#   solution to the problems associated with the   #
#   anomalies listed below.  This software may not #
#   be compatible with subsequent software releases.   #
#  #




REQUIREMENTS

SPECTRUM 09.02.00 and 09.02.01 are prerequisites for installation of
this patch.

OVERVIEW 

This is a debug patch for the following issue: Stale Ehealth Server 
Alarms
(87477,20882687-01)

BILL OF MATERIALS

ReleaseNote.D306.txt
clientjehealth.jar
jehealth.jar

runme.exe (Windows)
uninstall_D306.exe (Windows)

runme (Solaris/Linux)
uninstall_D306.pl (Solaris/Linux)

INSTALLATION INSTRUCTIONS

   NOTE: Please set all file permissions and ownership to the permissions
 and ownership of the existing libraries and files that you are
 replacing.

   NOTE: As `root` or an Administrator user:

   1. Delete all stale Alarms.

   2. Shutdown the OneClick clients and tomcat.

   3. Copy the SPECTRUM release files into a clean directory and start the
  installation as follows:

  -For Solaris:

- Save Spectrum_09.02.01.D306.Solaris.txe in a directory
  of your choice.

- Type: chmod 755 Spectrum_09.02.01.D306.Solaris.txe to
  change the permissions of the file.

- ./Spectrum_09.02.01.D306.Solaris.txe

  -For Windows:

- Save Spectrum_09.02.01.D306.Windows.exe in a directory
  of your choice.

- In a bash shell run: ./Spectrum_09.02.01.D306.Windows.exe

- Click on OK in the pop-up, once the installation is complete.

  -For Linux:

- Save Spectrum_09.02.01.D306.Linux.txe in a directory
  of your choice.

- Type: chmod 755

[spectrum] Spectrum default watches - where to see formulas

[Ivana Kvaka]

Hi all from list,

Do you know where to see how default Spectrum watches, for instance 
Load_IN look like? In the old 8.1 this could be seen in SpectroGraph, in 
SpectroWatch.
But in 9.2., it seems to me they are somewhere hidden. And there is no 
even documentation about this watches and their formulas.

Thanks!

Ivana


Srdacan pozdrav / Kind regards,
_
Ivana Kvaka
Sedam IT d.o.o.
HR - 10 000 Zagreb
Koledovcina 2
Tel:+385   1 2353 736
Fax:   +385   1 2353 707
Mob: +385 91 2353 736
www.sedamIT.hr
_

_
Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene
osobama oznacenima kao primateljima te se pristup od strane bilo koje
druge osobe smatra neovlastenim. Ukoliko niste oznaceni primatelj, svaka
distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim
osobama je strogo zabranjeno i smatra se protuzakonitim. Ukoliko ste
dobili ovu poruku, a niste oznaceni primatelj, molimo Vas da sto prije
obavijestite posiljatelja poruke i unistite sve postojece kopije. Ova
napomena takodjer potvrdjuje da je ova elektronicka poruka testirana na
postojanje racunalnih virusa.

Disclaimer: 
The information in this email is confidential and it is intended solely
for the addressee. Access to this email by anyone else is unauthorized. If
you are not the intended recipient, any distribution, copying, duplication
or disclosure is prohibited and may be unlawful. If you have received this
email in error, please notify the sender immediately and destroy it, and
all copies of it. This footnote also confirms that this email message has
been swept for the presence of computer viruses.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum default watches - where to see formulas

[Stephen Warne]

Hi Ivana
Go to the Oneclick WEB page  administration  watch reports
Hope this helps.
Regards
Stephen.

From: Ivana Kvaka [mailto:ivana.kv...@sedamit.hr]
Sent: 20 November 2012 15:15
To: spectrum
Subject: [spectrum] Spectrum default watches - where to see formulas

Hi all from list,

Do you know where to see how default Spectrum watches, for instance Load_IN 
look like? In the old 8.1 this could be seen in SpectroGraph, in SpectroWatch.
But in 9.2., it seems to me they are somewhere hidden. And there is no even 
documentation about this watches and their formulas.

Thanks!

Ivana


Srdacan pozdrav / Kind regards,
_
Ivana Kvaka
Sedam IT d.o.o.
HR - 10 000 Zagreb
Koledovcina 2
Tel:+385   1 2353 736
Fax:   +385   1 2353 707
Mob: +385 91 2353 736
www.sedamIT.hr
_

Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene 
osobama oznacenima kao primateljima te se pristup od strane bilo koje druge 
osobe smatra neovlastenim. Ukoliko niste oznaceni primatelj, svaka 
distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim osobama je 
strogo zabranjeno i smatra se protuzakonitim. Ukoliko ste dobili ovu poruku, a 
niste oznaceni primatelj, molimo Vas da sto prije obavijestite posiljatelja 
poruke i unistite sve postojece kopije. Ova napomena takodjer potvrdjuje da je 
ova elektronicka poruka testirana na postojanje racunalnih virusa.

Disclaimer: The information in this email is confidential and it is intended 
solely for the addressee. Access to this email by anyone else is unauthorized. 
If you are not the intended recipient, any distribution, copying, duplication 
or disclosure is prohibited and may be unlawful. If you have received this 
email in error, please notify the sender immediately and destroy it, and all 
copies of it. This footnote also confirms that this email message has been 
swept for the presence of computer viruses.


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
stephenwa...@networksfirst.commailto:stephenwa...@networksfirst.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum + ITPAM with BMC Remedy for open tickets

[Jesús A. Chávez Bastías]

 Hi to all:

 I need integrate Spectrum with BMC Remedy from ITPAM for open tickets when a 
critical alarm appear.

  I have integrated SOI with Remedy but the Global Collection is not appear in 
the ticket information.

 Any suggestons?

 Very thanks.
 
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

AW: [spectrum] Spectrum Event Configuration

[Nolz Andreas]

Hello,

You can create two Event Rules using Event Configuration Editor.
An Event Pair Rule for Event A and B.
An Event Series Rule for the new event and event 0x00010042 (device has stopped 
responding to polls).

Regards
Andreas

-Ursprüngliche Nachricht-
Von: kavi arasu [mailto:kaviaras...@gmail.com] 
Gesendet: Dienstag, 30. Oktober 2012 19:08
An: spectrum
Betreff: [spectrum] Spectrum Event Configuration

Hi,

Is there any way by which we can generate a custom event under event rules by 
considering these three conditions. 

1. Event A was received
2. Event B was not received with in certain time interval 3. The ping to the 
device fails.

Regards,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum andreas.n...@kapsch.net
The information contained in this e-mail message is privileged and
confidential and is for the exclusive use of the addressee. The person
who receives this message and who is not the addressee, one of his
employees or an agent entitled to hand it over to the addressee, is
informed that he may not use, disclose or reproduce the contents
thereof, and is kindly asked to notify the sender and delete the e-mail
immediately.



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Event Configuration

[kavi arasu]

Hi,

Is there any way by which we can generate a custom event under event rules by 
considering these three conditions. 

1. Event A was received 
2. Event B was not received with in certain time interval
3. The ping to the device fails.

Regards,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum in Solaris zones

[Jeff Wieland]

Sometime back, there was some discussion of installing Spectrum
in Solaris 10 zones - for anyone who has done this, do they need
to be whole root zones, or will sparse zones work OK?

--
 Jeff Wieland| Purdue University
  Network Systems Administrator  |ITSO UNIX Platforms
  Voice: (765)496-8234   |401 S. Grant Street
   FAX: (765)496-1380|  West Lafayette, IN 47907


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum in Solaris zones

[Craig Cook]

Sparse zones are fine.

Craig

-Original Message-
From: Jeff Wieland [mailto:wiel...@purdue.edu] 
Sent: Wednesday, September 12, 2012 11:54 AM
To: spectrum
Subject: [spectrum] Spectrum in Solaris zones

Sometime back, there was some discussion of installing Spectrum in Solaris 10 
zones - for anyone who has done this, do they need to be whole root zones, or 
will sparse zones work OK?

-- 
  Jeff Wieland| Purdue University
   Network Systems Administrator  |ITSO UNIX Platforms
   Voice: (765)496-8234   |401 S. Grant Street
FAX: (765)496-1380|  West Lafayette, IN 47907


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum craig.c...@carquest.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Antwort: RE: [spectrum] Spectrum in Solaris zones

[Christian Fieres]

Jeff,

you should however consider switching to a 3rd party TFTP server for NCM 
as Sun's (Oracle's) out of the box server can only run in the Global Zone, 
AFAIR. Apart from that I can tell you that I am running an SS and two 
OneClick Servers in Sparse Root Zones on a rather old Solaris 10 
patchlevel (mid-2008) and haven't had any problems so far.

Freundliche Grüße / Best regards

Christian Fieres

Mainova AG
Planung und Betrieb Infrastruktur (M3-ON2)
Service Operation Center
Solmsstraße 38
60623 Frankfurt

Telefon / Phone (069) 2 13-2 36 17
Mobil / Mobile (0170) 5 60 15 63
Telefax / Facsimile (069) 2 13-9 62 36 17
E-Mail c.fie...@mainova.de




Von:Craig Cook craig.c...@carquest.com
An: spectrum spectrum@listserv.unc.edu, 
Datum:  12.09.2012 18:35
Betreff:RE: [spectrum] Spectrum in Solaris zones



Sparse zones are fine.

Craig

-Original Message-
From: Jeff Wieland [mailto:wiel...@purdue.edu] 
Sent: Wednesday, September 12, 2012 11:54 AM
To: spectrum
Subject: [spectrum] Spectrum in Solaris zones

Sometime back, there was some discussion of installing Spectrum in Solaris 
10 zones - for anyone who has done this, do they need to be whole root 
zones, or will sparse zones work OK?

-- 
  Jeff Wieland| Purdue University
   Network Systems Administrator  |ITSO UNIX Platforms
   Voice: (765)496-8234   |401 S. Grant Street
FAX: (765)496-1380|  West Lafayette, IN 47907


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum craig.c...@carquest.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum c.fie...@mainova.de




Mainova Aktiengesellschaft Solmsstraße 38 D-60623 Frankfurt am Main
Vorsitzende des Aufsichtsrates: Dr. h. c. Petra Roth, Oberbürgermeisterin 
a. D.
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Dr. Peter Birkner, 
Lothar Herbst, Dr. Marie-Luise Wolff
Sitz der Aktiengesellschaft: Frankfurt am Main Amtsgericht Frankfurt HRB 
7173 USt-ID-Nr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum Job Description

[Scott Adler]

Group,

I need to rewrite my job description at work and was wondering if
anyone on the list would care to share your Spectrum related job
descriptions with me?
You may send them directly to me if you like.

Thank you
Scott Adler

-- 
For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled.
Richard Feynman 1918-1988

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] Spectrum and SysEdge Aggregate State Change alarms

[joseph . poutre]

Bonjour fellow Spectroservians,

We have a requirement here to route SysEdge-monitored object alarm emails 
to different groups based on the resource.
As an example, for our Unix systems, if the /var parition fills up, we 
need to email the Unix sysadmins.
However, if it were /opt/oracle, or /home/sybase, we would need to email 
the DBA team.
We had tried setting up additional Events, using Event Rules off the 
primary Aggregate State Change event - 0x1169462.
There are two issues doing this:

1. If we leave the Alarm setting on for the original event, then there are 
two alarm emails and two alarms posted to the OneClick console. Spectrum 
will email the 0x1169462 alarm every time. We prefer that if a custom 
event is called, the original event should not alarm, but Spectrum does 
not do this.
2. If we turn off the Alarm on 0x1169462, we need to create one extra 
custom Event, the none-of-these-other-custom-events Event, which will 
generate an Alarm if none of the other custom Events matches the 
parameters. The problem then becomes ensuring that the extra custom Event 
always is triggered, and only is triggered, if none of the other custom 
Events is triggered. This is simple if we have a single digit worth of 
such Events, but we expect to have dozens.

I do hope my explanation of our issue is clear, and that other groups 
using Spectrum with SysEdge have ideas that can guide us to an efficient 
and effective solution.

Merci d'avance,
Joseph Poutre
BNP Paribas


This message and any attachments (the message) is intended solely for 
the addressees and is confidential. If you receive this message in error, 
please delete it and immediately notify the sender. Any use not in accord 
with its purpose, any dissemination or disclosure, either whole or partial, 
is prohibited except formal approval. The internet can not guarantee the 
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) 
not therefore be liable for the message if modified. Please note that certain 
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Utilizing Splunk

[david t. klein]

 

Create a policy and a SetScript/ClearScript that assemble the message from
the attributes/VarBinds and write it to a FIFO in the filesystem of the VNM
server. Then install the Splunk Light Forwarder Agent, and have it read the
FIFO as though it were plain text-file. 

 

 

-DTK

 

--
david t. klein

Cisco Certified Network Associate (CSCO11281885)
Linux Professional Institute Certification (LPI000165615)
Redhat Certified Engineer (805009745938860)

Quis custodiet ipsos custodes?




 

From: Jeremy Montoya [mailto:jeremy.mont...@mesaaz.gov] 
Sent: Thursday, August 16, 2012 12:36 PM
To: spectrum
Subject: [spectrum] Spectrum Utilizing Splunk

 

Just curious if anyone has tried using Splunk to backend Spectrum for
reporting?

*   --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum r...@nachtmaus.us 

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5203 - Release Date: 08/15/12


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Utilizing Splunk

[Rick Jury]

I have a test app I've been working on that does this.

Happy to share the app with anyone who wants to try it out just email me direct.



[cid:image001.jpg@01CD7C5F.25524B60]








Rick Jury
Senior Support Specialist Tools
Technology  Shared Services
Phone: +64 4 8029643
Mobile: +64 27 278 5992


Level 12 Telecom Central - Boulcott
42-52 Willis Street, Wellington
www.telecom.co.nzhttp://www.telecom.co.nz




This communication, including any attachments, is confidential. If you are not 
the intended recipient, you should not read it - please contact me immediately, 
destroy it, and do not copy or use any part of this communication or disclose 
anything about it. Thank you. Please note that this communication does not 
designate an information system for the purposes of the Electronic Transactions 
Act 2002.





From: david t. klein [mailto:r...@nachtmaus.us]
Sent: Friday, 17 August 2012 8:06 a.m.
To: spectrum
Subject: RE: [spectrum] Spectrum Utilizing Splunk


Create a policy and a SetScript/ClearScript that assemble the message from the 
attributes/VarBinds and write it to a FIFO in the filesystem of the VNM server. 
Then install the Splunk Light Forwarder Agent, and have it read the FIFO as 
though it were plain text-file.


-DTK

--
david t. klein

Cisco Certified Network Associate (CSCO11281885)
Linux Professional Institute Certification (LPI000165615)
Redhat Certified Engineer (805009745938860)

Quis custodiet ipsos custodes?


From: Jeremy Montoya [mailto:jeremy.mont...@mesaaz.gov]
Sent: Thursday, August 16, 2012 12:36 PM
To: spectrum
Subject: [spectrum] Spectrum Utilizing Splunk

Just curious if anyone has tried using Splunk to backend Spectrum for reporting?

 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
r...@nachtmaus.usmailto:r...@nachtmaus.us


No virus found in this message.
Checked by AVG - www.avg.comhttp://www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5203 - Release Date: 08/15/12

 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
rick.j...@telecom.co.nz

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Cantwell, Rene D]

Hello Fritz,

It looks like a bug in our install checker functionality. At the very least the 
pop up error message should tell you which applications it wants you to 
shutdown.

The applications it should be checking for on Linux/Solaris are: 
processd,SCP,LocServer, ArchMgr, nameserv, telnetd spectrum, ncmservice, mysqld 
spectrum, SpectroSERVER, VnmShd, java OneClick.

If all of these instances (not just the Spectrum version of them) are shutdown 
and install will still not work, please open a support issue so we can get 
engineering involved to help resolve.

--
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)

From: fritz.buetiko...@id.unibe.ch [mailto:fritz.buetiko...@id.unibe.ch]
Sent: Monday, August 06, 2012 7:24 AM
To: spectrum
Cc: spectrum@listserv.unc.edu
Subject: Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Rene

I downloaded SP2 for Solaris 9 last week and tried to update our
test server to 9.2-SP2 ... and failed ;-((

I tried to install with the Spectrum environment UP (SS down, but LocServer and
other apps running) and also without the Spectrum environment. In both scenarios
the error message was the same:



... there is no process mentioned in the pop-ip mesage that should be up; so I 
assume
the new process-checker on Solaris has something broken !

The other bad thing is, that after the install of SP2 has failed, I am not able 
anymore
to startup the SCP gui to restart the old 9.2-H07 version. The error message in 
the
SCP.OUT file is:

streicher cat SCP.OUT
Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

.. which means, that I am blocked out twice !!!

###

Is there any way to start the installer on Solaris without the new 
process-check ?

Thank you and best regards,

--Fritz.
___
University of Bern
Computer Services Department

Fritz Buetikofer
Senior IT Manager

Gesellschaftsstrasse 6
CH-3012 Bern
Switzerland
Tel.+41 (0)31 631 3843
Fax.   +41 (0)31 631 3865
Web. http://www.id.unibe.ch



On 02.08.2012, at 15:23, Cantwell, Rene D 
rene.cantw...@ca.commailto:rene.cantw...@ca.com wrote:



Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comareaftp://ftp.ca.comarea as 
9.2.2 itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;

1.Original DVD iso image was corrupt.
a.What is available today is good.
2.Solaris crash, found in late QA tests.
a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.
3.RedHat 5.8 crash after installing 9.2.2.
a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.
4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.
5.Install stopping running non-Spectrum mysql process.
a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly to me.

Regards,
Rene'



René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603

RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Nason, Roger W]

Fritz,

To get the Spectrum Control Panel to Launch you will need to remove the 
$SPECROOT/Install-Tools/IDX/CD directory and relaunch and SCP will launch.

Regards,

- Roger

From: Cantwell, Rene D
Sent: Monday, August 06, 2012 10:00 AM
To: fritz.buetiko...@id.unibe.ch; spectrum
Cc: Nason, Roger W
Subject: RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Fritz,

It looks like a bug in our install checker functionality. At the very least the 
pop up error message should tell you which applications it wants you to 
shutdown.

The applications it should be checking for on Linux/Solaris are: 
processd,SCP,LocServer, ArchMgr, nameserv, telnetd spectrum, ncmservice, mysqld 
spectrum, SpectroSERVER, VnmShd, java OneClick.

If all of these instances (not just the Spectrum version of them) are shutdown 
and install will still not work, please open a support issue so we can get 
engineering involved to help resolve.

--
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)

From: fritz.buetiko...@id.unibe.ch [mailto:fritz.buetiko...@id.unibe.ch]
Sent: Monday, August 06, 2012 7:24 AM
To: spectrum
Cc: spectrum@listserv.unc.edu
Subject: Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Rene

I downloaded SP2 for Solaris 9 last week and tried to update our
test server to 9.2-SP2 ... and failed ;-((

I tried to install with the Spectrum environment UP (SS down, but LocServer and
other apps running) and also without the Spectrum environment. In both scenarios
the error message was the same:



... there is no process mentioned in the pop-ip mesage that should be up; so I 
assume
the new process-checker on Solaris has something broken !

The other bad thing is, that after the install of SP2 has failed, I am not able 
anymore
to startup the SCP gui to restart the old 9.2-H07 version. The error message in 
the
SCP.OUT file is:

streicher cat SCP.OUT
Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

.. which means, that I am blocked out twice !!!

###

Is there any way to start the installer on Solaris without the new 
process-check ?

Thank you and best regards,

--Fritz.
___
University of Bern
Computer Services Department

Fritz Buetikofer
Senior IT Manager

Gesellschaftsstrasse 6
CH-3012 Bern
Switzerland
Tel.+41 (0)31 631 3843
Fax.   +41 (0)31 631 3865
Web. http://www.id.unibe.ch


On 02.08.2012, at 15:23, Cantwell, Rene D 
rene.cantw...@ca.commailto:rene.cantw...@ca.com wrote:


Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comareaftp://ftp.ca.comarea as 
9.2.2 itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;

1.Original DVD iso image was corrupt.
a.What is available today is good.
2.Solaris crash, found in late QA tests.
a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.
3.RedHat 5.8 crash after installing 9.2.2.
a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.
4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.
5.Install stopping running non-Spectrum mysql process.
a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201

RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Lip Jen Chew]

I'm unable to continue with this error as well, on Solaris. Did you find a 
solution?

I haven't try to start my Spectrum yet...

Lip Jen


From: Cantwell, Rene D [rene.cantw...@ca.com]
Sent: Monday, August 06, 2012 10:00 AM
To: spectrum
Cc: Nason, Roger W
Subject: RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Fritz,

It looks like a bug in our install checker functionality. At the very least the 
pop up error message should tell you which applications it wants you to 
shutdown.

The applications it should be checking for on Linux/Solaris are: 
processd,SCP,LocServer, ArchMgr, nameserv, telnetd spectrum, ncmservice, mysqld 
spectrum, SpectroSERVER, VnmShd, java OneClick.

If all of these instances (not just the Spectrum version of them) are shutdown 
and install will still not work, please open a support issue so we can get 
engineering involved to help resolve.

--
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[cid:image001.jpg@01CD73B9.7D08B8C0]https://exch.mail.umd.edu/owa/UrlBlockedError.aspx

From: fritz.buetiko...@id.unibe.ch [mailto:fritz.buetiko...@id.unibe.ch]
Sent: Monday, August 06, 2012 7:24 AM
To: spectrum
Cc: spectrum@listserv.unc.edu
Subject: Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Rene

I downloaded SP2 for Solaris 9 last week and tried to update our
test server to 9.2-SP2 … and failed ;-((

I tried to install with the Spectrum environment UP (SS down, but LocServer and
other apps running) and also without the Spectrum environment. In both scenarios
the error message was the same:



… there is no process mentioned in the pop-ip mesage that should be up; so I 
assume
the new process-checker on Solaris has something broken !

The other bad thing is, that after the install of SP2 has failed, I am not able 
anymore
to startup the SCP gui to restart the old 9.2-H07 version. The error message in 
the
SCP.OUT file is:

streicher cat SCP.OUT
Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

.. which means, that I am blocked out twice !!!

###

Is there any way to start the installer on Solaris without the new 
process-check ?

Thank you and best regards,

--Fritz.
___
University of Bern
Computer Services Department

Fritz Buetikofer
Senior IT Manager

Gesellschaftsstrasse 6
CH-3012 Bern
Switzerland
Tel.+41 (0)31 631 3843
Fax.   +41 (0)31 631 3865
Web. http://www.id.unibe.ch



On 02.08.2012, at 15:23, Cantwell, Rene D 
rene.cantw...@ca.commailto:rene.cantw...@ca.com wrote:



Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com/ - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comareaftp://ftp.ca.comarea/ as 
9.2.2 itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;

1.Original DVD iso image was corrupt.
a.What is available today is good.
2.Solaris crash, found in late QA tests.
a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com/ site 
mentioned above.
3.RedHat 5.8 crash after installing 9.2.2.
a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.
4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.
5.Install stopping running non-Spectrum mysql process.
a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe

Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Rob]

Nice to see an very familiar name still working with Spectrum

I have installed 9.2.2 twice now with no issues at all. (RHEL)  I 
abandoned the X based installer about 7 months ago for  SRAdmin which I 
love. All is done from the sdic subdir and two control files: hostargs 
and (what I call it) srapass.  Read up on it in the Install Guide and 
you'll see it's pretty simple, but does require the SRAadmin daemon to 
be set up prior. (trivial)

  Even in my highly silo'd environment, I am given the flexibility of 
the Linux admins to have root for the 20 mins it takes me to upgrade 
with SRAdmin. Have used it for H04, 5, 6, 7 and will now in Prod for H08.

The docs say to shut ALL processes down if I'm not mistaken, including 
processd and all the components in the partslists...

 From the Release Notes:


  PRE-INSTALLATION INSTRUCTIONS for Spectrum 9.2.2.8.201
  (SpectroSERVER, OneClick, and other related components)

1. If you have customized any files that were provided with prior
Spectrum installations, then you should refer to the Preserving
Database Customizations section of the Installation Guide (Document
Spectrum_Install_ENU.pdf) for instructions on preserving your
customizations.

2. Shut down OneClick, SpectroSERVER, Archive Manager, Control
Panel, processd, and any other Spectrum applications that are
running including bash shells.



-Rob Borowicz



On 8/6/2012 6:24 AM, fritz.buetiko...@id.unibe.ch wrote:
 Hello Rene

 I downloaded SP2 for Solaris 9 last week and tried to update our
 test server to 9.2-SP2 … and failed ;-((

 I tried to install with the Spectrum environment UP (SS down, but 
 LocServer and
 other apps running) and also without the Spectrum environment. In both 
 scenarios
 the error message was the same:


 … there is no process mentioned in the pop-ip mesage that should be 
 up; so I assume
 the new process-checker on Solaris has something broken !

 The other bad thing is, that after the install of SP2 has failed, I am 
 not able anymore
 to startup the SCP gui to restart the old 9.2-H07 version. The error 
 message in the
 SCP.OUT file is:

 streicher cat SCP.OUT
 Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
 Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

 .. which means, that I am blocked out twice !!!

 ###

 Is there any way to start the installer on Solaris without the new 
 process-check ?

 Thank you and best regards,

 --Fritz.
 ___
 University of Bern
 Computer Services Department

 Fritz Buetikofer
 Senior IT Manager

 Gesellschaftsstrasse 6
 CH-3012 Bern
 Switzerland
 Tel.+41 (0)31 631 3843
 Fax.   +41 (0)31 631 3865
 Web. http://www.id.unibe.ch



 On 02.08.2012, at 15:23, Cantwell, Rene D rene.cantw...@ca.com 
 mailto:rene.cantw...@ca.com wrote:


 Hello Everyone,

 Spectrum 9.2 Service Pack SP02 (aka H08) is now available for 
 customer download.

 A news item announcement with highlights of what is included in 9.2.2 
 can be found on our product home page at 
 https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

 Customers can download from two sources;
 From support.ca.com - 
 https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
 From ftp.ca.com - /pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

 Since cutting the DVD iso image the Release Notice (SRN) has been 
 updated with two additional special consideration items #21 and #22. 
  The Solaris PTF patch for #22 is available from the 
 same ftp.ca.comarea as 9.2.2 itself 
 (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

 In addition to these two special considerations, the support team is 
 working on the following issues with our sustaining engineering team;

 1.Original DVD iso image was corrupt.
 a.What is available today is good.
 2.Solaris crash, found in late QA tests.
 a.PTF_9.2.201 is available from ftp.ca.com site mentioned above.
 3.RedHat 5.8 crash after installing 9.2.2.
 a.Temp workaround: replacing the default MTS version of the 
 SpectroSERVER executable with the non-MTS version (shipped) resolves 
 the problem. Please contact the support team if help is needed.
 4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
 a.Support actively working with SE on workaround, root cause and 
 solution. Please contact the support team if you are experiencing 
 this issue.
 5.Install stopping running non-Spectrum mysql process.
 a.Support actively working with SE on solution for next hotfix, 
 temp workaround is to shutdown what install is requesting in order to 
 start the 9.2.2 install.


 Here are the checksums for each of the ftp executables:

 76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
 cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
 4b395435d9577a9d0b77d3968693751a  *Spectrum_09.02.02.00.201.Windows.exe
 

[spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Cantwell, Rene D]

Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832%20 
.

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comftp://ftp.ca.com area as 9.2.2 
itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;


1.Original DVD iso image was corrupt.

a.What is available today is good.

2.Solaris crash, found in late QA tests.

a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.

3.RedHat 5.8 crash after installing 9.2.2.

a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.

4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.

a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.

5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.



Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly to me.

Regards,
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Bohra, Saurabh]

Rene,

I have concern about the following statement.  Do we have to stop this on 
SpectroSERVER machine or OneClick machine with SRM. If it is latter SRM will 
not get upgraded, if we shutdown mysql process in *NIX.


5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Thursday, August 02, 2012 9:23 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available 
for customer download.


Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832%20 
.

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comftp://ftp.ca.com area as 9.2.2 
itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;


1.Original DVD iso image was corrupt.

a.What is available today is good.

2.Solaris crash, found in late QA tests.

a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.

3.RedHat 5.8 crash after installing 9.2.2.

a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.

4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.

a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.

5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.



Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly to me.

Regards,
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[cid:image001.jpg@01CD709B.E7E4DD70]javascript:ClickThumbnail(76)


 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Cantwell, Rene D]

Good question Saurabh.  I'm going to ask Roger Nason to answer you.  Roger is 
working with SE on this issue and is in the process of developing a knowledge 
doc for it.

--
Rene'

René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)

From: Bohra, Saurabh [mailto:saurabh.bo...@espn.com]
Sent: Thursday, August 02, 2012 10:58 AM
To: Cantwell, Rene D; spectrum
Subject: RE: Spectrum 9.2 Service Pack SP02 (aka H08) is now available for 
customer download.

Rene,

I have concern about the following statement.  Do we have to stop this on 
SpectroSERVER machine or OneClick machine with SRM. If it is latter SRM will 
not get upgraded, if we shutdown mysql process in *NIX.


5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

From: Cantwell, Rene D 
[mailto:rene.cantw...@ca.com]mailto:[mailto:rene.cantw...@ca.com]
Sent: Thursday, August 02, 2012 9:23 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available 
for customer download.


Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832%20 
.

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comftp://ftp.ca.com area as 9.2.2 
itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;


1.Original DVD iso image was corrupt.

a.What is available today is good.

2.Solaris crash, found in late QA tests.

a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.

3.RedHat 5.8 crash after installing 9.2.2.

a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.

4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.

a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.

5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.



Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly to me.

Regards,
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg