://web.mit.edu/answers/unix/unix_parameters.html
[2]
http://www.voip-info.org/wiki-Asterisk+config+voicemail.confhttp://www.voip-info.org/wiki-Asterisk+config+voicemail.conf
On Fri, Feb 22, 2008 at 6:17 AM, Michael Keuter
mailto:[EMAIL PROTECTED][EMAIL PROTECTED] wrote:
[...]
You have to connect
Hi list,
in Astlinux 0.48 in the web interface for the voicemail the
externnotify script (of the voicemail.conf) is not triggered, when
the message count of a mailbox changes. Maybe this could be built in
the next Astlinux version.
Greetings from Hamburg
Michael
--
Email: mailto:[EMAIL
Hi Lonnie,
still using Astlinux 0.4.8. How can I use your Alternate Interface
and the original together?
If I use this config:
##Secondary HTTP only server
HTTPDIR=/mnt/kd/altweb
HTTPUSER=nobody
HTTPCGI=yes
##HTTPS Variables
HTTPSDIR=/stat/var/www # Define the location to serve HTTPS from
Hi Lonnie,
still using Astlinux 0.4.8. How can I use your Alternate Interface
and the original together?
If I use this config:
##Secondary HTTP only server
HTTPDIR=/mnt/kd/altweb
HTTPUSER=nobody
HTTPCGI=yes
##HTTPS Variables
HTTPSDIR=/stat/var/www # Define the location to serve HTTPS from
Hi Lonnie,
I use for my company number a time controlled voice menu. But I have
some VIP customers, who can reach me all the time. So I use a
whitelist. It is exactly like your blacklist but without the Action.
(the command is: database put whitelist 0+number 1, the leading
zero is from the
Thanks to all the great suggestions, I have another update of my
Alternate Web Interface.
3) I added a new Whitelist tab (hidden by default, but can be enabled
via the Prefs tab). This behaves very similar to the Blacklist tab,
Hi Lonnie,
thanks for adding the whitelist.
The CDR-Log shows
Can anyone tell me why my astmanproxy is not working:
Starting astmanproxy...
Aborting: server spec incomplete: 127.0.0.1,5038,username,password,on
The username and password are all correct in manager.conf.
Regards
Mike
Hello List,
is have the same problem with Astmanproxy as Mike before:
Can anyone tell me why my astmanproxy is not working:
Starting astmanproxy...
Aborting: server spec incomplete: 127.0.0.1,5038,username,password,on
The username and password are all correct in manager.conf.
Regards
Mike
Hello List,
is have the same problem with Astmanproxy as Mike before:
New update.
1) Added a Monitor tab (per Michael Keuter's
suggestion), hidden by default, but can be
shown with a Pref's tab option. Files with the
suffix of .wav or .WAV in the directory
/var/spool/asterisk/monitor/ are shown. Also
.wav files in up to 2 sub-directories will also
be shown.
It appears that MACRO() is not going away, though deprecated.
for the sake of backwards compatibility it will not be removed see
below.
From asterisk /tags/1.6.0-beta9/UPGRADE.txt
88 Macro() is now deprecated. If you need subroutines, you should
use the
The developers
1) Monitor tab now honors non-admin authenticated users, similarly
to the Voicemail tab.
If a user is authenticated as a non-admin user, only recordings saved
with a base directory matching the user's username will be displayed.
For example, user 1000 will only see recordings in the 1000/
Michael Keuter wrote:
Hi list,
on my Astlinux test PC (PIII 1GHz, 256 MB RAM) all geni386 trunk
images hang at boot, when the ntpd demon starts, for about 2-5
minutes. Trunk-1806-image was the latest where it worked. Now I got
1907 on it.
The PC has normal static network settings
I was actually hoping that Philip would have had a chance to respond to
that. It's statically set in target/initrd/initrd.mk, but there's a way
to set it via shell variable (export BLA=foo in bash) but I don't recall
the variable that he used. Right now there's not an easy way to make it
auto
Hi Darrick,
I have a Soekris net5501 (FW 1.33) in the field which runs with a
1808 image as a simple voicemail application. Today I was there again
and wanted to update it with the new 1948 image and new
AltWeb-version, but with the new image the VIA Rhine NICs are not
detected. I went back
Hi Darrick,
I have a Soekris net5501 (FW 1.33) in the field which runs with a
1808 image as a simple voicemail application. Today I was there
again and wanted to update it with the new 1948 image and new
AltWeb-version,
Sorry, I meant the new 0.6-1958 version.
but with the new image the VIA
Question,
Would it make sense for astLinux to offer an LDAP server?
http://www.openldap.org/
I ask since I own many SPA-942's and a new firmware 6.1.3a
incorporates the LDAPv3 Corporate Directory Search
Menu as in other Cisco Phones to enable the retrieval of directory
information based on
Hello Michael,
do you have any problems with the current oslec implementation in
mISDN/Astlinux?
regards,
Ingmar
Michael Keuter wrote:
Hi Devs,
will it be possible (in the future) to use Octasic SoftEcho with mISDN?
http://www.beronet.com/download/SoftEcho/README
I know
Hi Devs,
will it be possible (in the future) to use Octasic SoftEcho with mISDN?
http://www.beronet.com/download/SoftEcho/README
I know that there are license fees to be paid.
I ask, because there are not so many ISDN BRI cards with
echocancellation which fit into a net5501 case (the Sangoma
Well, so much for USB support in the NET4801.
The stick is detected on boot up but not mounted.
If I unplug it and then plug it back in after bootup when the system is
running then it gets detected and mounted as /dev/sda1. However, this
still doesn't allow me to make any writes other than
releases.
Thanks,
Steve
Michael Keuter wrote:
Michael,
I can attempt to compile this for you when I get home tonight.
I looked at both the source code and Makefile, and they look
pretty similar to the app_notify package.
That would be great.
I don't have a Nortel IP phone, however, so I
Hi list,
since upgrading from Astlinux 0.4.8 to 0.6.1 on my Soekris net4801
with 266MHz + 256 MB RAM (connected with an 1-port HFC-ISDN-card to a
legacy PBX) I have the problem, that the Asterisk application crashes
once or twice a week. Mostly when no call or application is active.
Linux is
Michael Keuter wrote:
Hi list,
since upgrading from Astlinux 0.4.8 to 0.6.1 on my Soekris net4801
with 266MHz + 256 MB RAM (connected with an 1-port HFC-ISDN-card to a
legacy PBX) I have the problem, that the Asterisk application crashes
once or twice a week. Mostly when no call
Following the movement to Linux kernel 2.6.25, I've had to change a few
packages to update their versions and/or change their build instructions
because of header file changes, things installing into different places,
and all sorts of other kruft.
Progress is being made. In most cases,
Hello,
I am currently preparing an update for mISDN trunk. Unfortunately we
cannot just 'upgrade' what we have currently in trunk / 0.6 branch for
various reasons.
Therefore, please tell me what you prefer and we'll see what we can do.
I am listing a few options we have:
a.) mISDN 1.1.8
Try to increase maxload into asterisk.conf to 4 .
Regards Andrea
Michael Keuter ha scritto
Hi Andrea,
I set maxload = 4
But Astlinux still crashes :-(. And still no logging messages.
On Nov 2, 2008, at 5:23 PM, Michael Keuter wrote:
Michael Keuter wrote:
Hi list
Hi list,
I have a weird problem with my Astlinux 0.6.1 installation on a
Soekris net4801 and also on my test PC (geni386):
I cannot type the capital letter M in the Astlinux shell. Neither
via the serial console nor via ssh. But in the Asterisk-CLI and in
nano the M is working normally.
I
Michael Keuter wrote:
Can you cut and paste it from elsewhere into ssh?
Hi Philip,
no thats how I found it out: I copied that string from the Astlinux
website wishlist:
awk '/^MemTotal:/ { print int($2 / 1024); }' /proc/meminfo
Michael Keuter wrote:
Hi
Michael Keuter wrote:
Michael Keuter wrote:
Can you cut and paste it from elsewhere into ssh?
Hi Philip,
no thats how I found it out: I copied that string from the Astlinux
website wishlist:
awk '/^MemTotal:/ { print int($2 / 1024); }' /proc
Hi,
because of the problems with my crashing net4801, today I got a new net5501.
I didn't found a running watchdog process in Astlinux 0.6.1.
Are there no drivers for Linux or what is the reason?
Michael
PS: Found about that:
Michael Keuter wrote:
Hi,
because of the problems with my crashing net4801, today I got a new net5501.
I didn't found a running watchdog process in Astlinux 0.6.1.
Are there no drivers for Linux or what is the reason?
Michael
PS: Found about that:
http://lists.soekris.com
Michael Keuter wrote:
Michael Keuter wrote:
Can you cut and paste it from elsewhere into ssh?
Hi Philip,
no thats how I found it out: I copied that string from the Astlinux
website wishlist:
awk '/^MemTotal:/ { print int($2 / 1024); }' /proc
Try to increase maxload into asterisk.conf to 4 .
Regards Andrea
Michael Keuter ha scritto
Hi Andrea,
I set maxload = 4
But Astlinux still crashes :-(. And still no logging messages.
On Nov 2, 2008, at 5:23 PM, Michael Keuter wrote:
Michael Keuter wrote:
Hi list
Since I first started playing with AstLinux a few months ago I have
observed significant improvements in the user interface(s) that are
available for our use.
The new (Lonnie's) Web Interface has made configuration, backup and
viewing status very much easier. I have found it very useful. But
Content-Type: multipart/signed; boundary=Apple-Mail-1-476342321; micalg=sha1;
protocol=application/pkcs7-signature
For AstLinux v0.6.2, I was attempting to setup my box as a
firewall/router. Ran into troubles (worry about that later) then
reconfigured as best I could back to having only
Darrick
thank you for your reply.
My hardware is a TDM400P with 2 * FXO and 1 * FXS daughter boards
It has been working fine for the last year. The problems have only come
about (coincidentally) since going to 0.6.2, and more significantly
since the temperature has dropped. This particular box
Hi list,
is it possible to use an USB2Serial-adapter with an Soekris or Alix board?
I know the Soekris have a 2nd port (I need for MWI to a legacy PBX)
but I then have to drill a hole, and I like to try an Alix 2D3 in the
future.
This is what I get on a net4801 with the adapter (PL-2303)
kernel:
http://www.prolific.com.tw/eng/downloads.asp?ID=31
Would it be possible to include it/activate it in Astlinux?
Michael Keuter wrote:
Hi list,
is it possible to use an USB2Serial-adapter with an Soekris or Alix board?
I know the Soekris have a 2nd port (I need for MWI to a legacy PBX
Michael Keuter wrote:
494ee92e.1030...@redfish-solutions.com
p06240800c57538cf3...@[192.168.2.210]
494fe2f4.4030...@redfish-solutions.com
p06240803c5759b4e4...@[192.168.2.210]
Message-ID: d20e99f5e6efdcea94b210c1f9808...@localhost
X-Sender: dhart...@djhsolutions.com
Received: from
Yes, that's correct. Those two modules would need to be added.
I'm saying
it's worth the size of the modules. We'll put it on the list to do. The
Prolific usb/serial device is one of the more popular ones that's
compatible with Linux and it should only add a few hundred kb to the
Michael Keuter wrote:
Yes, that's correct. Those two modules would need to be added.
I'm saying
it's worth the size of the modules. We'll put it on the list
to do. The
Prolific usb/serial device is one of the more popular ones that's
compatible with Linux and it should
But here goes:
I have Astlinux ( Geni586 ) successfully running on a few HP T55xx
and 57xx thin clients. There is a need to connect through the mostly
unused serial port to a ( Cisco ) router.
Is there any sort of comm facility in the standard distribution that
would allow one through ssh to
Since upgrading to 0.6.2, partitioning my flash disk and running
genunion I am now not only able to make ordinary configuration changes
sticky but the root password too.
The trouble is however that if your mobo only supports a single hard
disk channel, having multiple partitions does not really
Michael Keuter wrote:
Since upgrading to 0.6.2, partitioning my flash disk and running
genunion I am now not only able to make ordinary configuration changes
sticky but the root password too.
The trouble is however that if your mobo only supports a single hard
disk channel, having
Hi,
I tested the experimental pptpd package (with the 0.6 branch 2390),
because a customer of mine like to have that (I know about the
security issues of PPTP :-)).
With a few tweaks in the /etc/pptpd.conf (and manual starting of
pptpd) I got it running, so that I am connected from external
Hello all
Does anyone have any recommendations for a MiniPCI PRI card compatible
with Astlinux, to be fitted in a Soekris net5501 and connected to a UK
BT ISDN30? Cost is an issue.
Thanks
Tom
Hi Tom,
as I know there are only BRI or analogue miniPCI cards on the market
(Beronet, OpenVox).
You
Hi,
I would like to use astLinux to bridge E1/T1 to analog phone. So,
that would mean 3 PCI cars, one for E1/T1 and the other two for 16
ports analog phone.
Does anyone have suggestions for HW that I can use?
Thanks for your recommendation.
Pete
Hi Pete,
you could use eg. Patton
If not perhaps I'll be the first later today?
I'll post the image later today.
Mark
Hi Mark,
yes I tried, but I had problems detecting the NIC and the harddisk,
so I gave up. But I'm not sure, if I tested again with Parallels 4.0.
I would be very interested, if you are successful.
Michael
Hi
I am having trouble changing TZ_TIMEZONE for UK time (Astlinux 0.6.3)
/mnt/kd/rc.conf .
##GMT (UTC) is the default
#TIMEZONE=America/Chicago
TIMEZONE=GB
##uClibc Timezone
##See http://www.opengroup.org/onlinepubs/009695399/basedefs/
xbd_chap08.html
#TZ_TIMEZONE=CST6CDT
Hi list,
because I use Munin on my Debian-server I always wanted to have it to
also monitor my Astlinux boxes.
Now I have created a running munin-node on Astlinux.
I used the files of the OpenWRT .ipkg version, with some fiddling.
http://munin.projects.linpro.no/wiki/OpenWRT-HowTo
But I used
Hi list,
is it possible to permanently connect 2 Astlinux boxes via an
OpenVPN connection.
The way one acts as server is clear to me. But how can I tell the
other Astlinux box, to be the client (via webinterface?) and connect
to the other box?
Michael
1) Extend the current openvpn definition/instance to be either client
or server.
2) Create a new openvpn client definition/instance (openvpnclient)
that acts as a separate openvpn client, using OVPNC_* variables.
It is possible, currently, to define your own /mnt/kd/openvpn/
Look in the Status tab, is OVPN_SERVER defined to anything?
It should be empty or not defined, for your openvpn client case.
If that looks OK, another try, in your Network tab User System
Variables (user.conf) set
INT_IF_TRUST=eth1 tun1
where eth1 is you 1st LAN interface and tun1 is your
Hi list,
has anyone successfully run the sipp traffic generator on Astlinux?
I found the test scenario at:
http://www.voipphreak.ca/2007/04/17/using-sipp-to-stress-test-your-asterisk-14-pbx-system/
When I try from one Astlinux-box to another (it's the same result
with 0.6.4 or trunk 2594):
Hi list,
I have a customer with Astlinux 0.6.4 on a net5501, who was (not
successfully) tested by a SIP-hacker:
Apr 12 14:49:40 asterisk local0.notice asterisk[1832]: NOTICE[1832]:
chan_sip.c:15839 in handle_request_register: Registration from
Hi list,
I have a customer with Astlinux 0.6.4 on a net5501, who was (not
successfully) tested by a SIP-hacker:
Apr 12 14:49:40 asterisk local0.notice asterisk[1832]: NOTICE[1832]:
chan_sip.c:15839 in handle_request_register: Registration from
Dan Ryson wrote:
All,
It appears we're getting pounded by a kiddy script that's trying to
guess passwords. It's generating ~1,350 password guesses and log
entries per minute (see example below). Although I have strong
passwords, I'd like to block this effort by blocking this IP
Michael Keuter wrote:
Dan Ryson wrote:
All,
It appears we're getting pounded by a kiddy script that's trying to
guess passwords. It's generating ~1,350 password guesses and log
entries per minute (see example below). Although I have strong
passwords, I'd like to block
I did the testing with the last 0.65 version and I'm on a 4801 hardware.
again it's working fine with version 0.62
David Kerr wrote:
Yes, maybe. What hardware are you running on?
On my Alix2c3 I found
considerable instability with the System()
command inside dialplans on 0.6.x versions of
Miguel Paolino wrote:
2009/4/29 David Kerr da...@kerr.net mailto:da...@kerr.net
I just came across Fax for Asterisk. It is free for a single
channel. Are you saying that the binaries that digium provide for
download will not work with Astlinux ?
Hi to all,
I've been
mISDN claims to work with the card:
http://www.misdn.org/index.php/MISDN_v2_Hardware
http://www.misdn.org/index.php/MISDN_compatible_Hardware (though this
referes to the PCI, not the miniPCI version - I assume the only
difference is the form factor)
I tried contacting
Interesting...
TC400B - Voice Processing - Data Sheet
http://docs.digium.com/TC400B/tc400b-datasheet.pdf
It would be cool if of a lower than 120 G.729a Transcodes option was
available for a lower cost for embedded applications.
Lonnie
On May 27, 2009, at 10:00 AM, Darrick Hartman wrote:
Quick survey question for web interface users...
One of the most time consuming tasks when generating the Status tab is
the NTP Peer States section.
Currently, I do this...
$ ntpq -p
remote refid st t when poll reach delay
offset jitter
at BeroNet seem also a miniPCI E1 in the works, see:
http://www.beronet.com/content/view/73/91/lang,en/
In case anyone was interested in the release of this product, Beronet
have just told me they are no longer going to produce it. I think that
leaves the Junghanns as the only minPCI PRI
Do you especially need miniPCI?
Yes, because, together with a PCI analogue card, it will all fit in a
standard net5501 case.
Tom
And with the Berofix you could have it as small additional external
box, which has slots for 2 modules.
Michael
mISDN is a bit of an unknown to most of the developers.
I appreciate that, Darrick. I'm also posting on the mISDN and
ISDN4Linux lists to try to get ISDN-specific help, as well as on the
OpenVox forum. The question I was hoping the Astlinux list might be
able to answer could be rephrased as:
Just wanted to update the list on the status of a few items in trunk and
some other development.
Trunk:
**Known issues**
To my knowledge, these are the last remaining issues before we can
branch trunk to 0.7. AstLinux 0.7 will be the last branch with Asterisk
1.4. After we branch trunk, zaptel
I strongly recommend using mISDN-socket branch with LCR and
chan_lcr-driver.
Does anyone know anything about mISDN-socket? How does this relate to mISDNv2?
Tom
Hi Tom,
yes the mISDN-socket branch IS mISDNv2. And chan_lcr ONLY works with mISDNv2.
Hello all
In a previous thread, Michael K mentioned the following:
there are not so many ISDN BRI cards with
echocancellation which fit into a net5501 case (the Sangoma A500
(which has hardware-ec) is too big).
Hi Tom,
the A500 seems to have the same size like the B700 which I have
You can take a closer look at new modular Berofix from Beronet
(http://www.berofix.de) which fits and also has EC AND it's
own ISDN stack. So you don't have problems with mISDN and OSLEC.
Would this be easy enough to install in Astlinux?
Yes, because it will be recognized like a Realtek
OK. Finally got the geni586 image written to a card. 8139too is
uncommented by default, so that seems good. However, with no other
changes, the presence of the Beronet card seems to wipe out the
net5501's on-board NICs. Tried changing the order of the modules in
/etc/rc.modules, putting via-rhine
Hi Michael
I followed this process (though the page's layout is broken in IE8/PC
which makes it somewhat difficult to read without viewing the source).
I don't believe it tells you manually to visit the setup page twice.
The one issue while I was using the setup page was that the HTTP
redirect,
This has taken a bit of work. Trying to install a Berofix card into a
net5501 running Astlinux 0.6.7. This is what I've done:
Nice that it works now.
Notes:
Step 1: Though installed on a net5501, the net5501 0.6.7 Astlinux
build doesn't have the 8139too driver - do I understand it is under
All went well on-site, so it's now in production. For others who might
want to use the Berofix (in a net5501), here is the procedure:
1. Boot the geni586 image without the Berofix installed
2. Use the Astlinux GUI to add the following to user.conf:
BRIDGE0=eth0 eth1
3. Install the Berofix,
Nice! Thanks Philip and Darrick,
I'll try it when I have some time and I'll be back with feedback.
Meanwhile I'm experimenting with voyage: http://linux.voyage.hk/
which has interesting kernel features:
Hi devs,
can someone please update the www.astlinux.org website, mentioning
that 0.6.8 is released, but only available via System Firmware
Upgrade. This could be also noted as news at Sourceforge project
site.
What about making more promotion for Astlinux in general:
E.g. links at the
This would imply that the define CONFIG_PRODUCT_WANPIPE_TDM_VOICE
is not set when wanpipe is build.
This is definitely a Philip question...
Lonnie
Maybe it is even more complicated:
When you look at ftp://ftp.sangoma.com/linux/current_wanpipe/ChangeLog.3.4
you'll see that Dahdi 2.2 support was
Hello all
I've always just bought a Sandisk from Soekris when setting up one of
their boxes, but I guess the exchange rate is hammering us in the UK a
tad these days, so I'm going to buy it separately. So, what size of CF
card is recommended now for Astlinux? I'll get a Sandisk again if I
can, as
Hi Michael
I shall see if anything is mentioned in the release notes which might
relate to this. My build environment never worked (Ubuntu - build
completed, but was non-functional), which is why I've waited for
Darrick's beta images before trialling 0.7.
Thanks
Tom
Maybe you are missing some
We need some input from Sangoma (wanpipe) users.
Namely, we need some input on what steps you use to generate
configuration files and more importantly, which files in
/stat/etc/wanpipe (which may also reside in /mnt/kd/wanpipe) are
required. There are several files that are present in that
Anyone with few good configuration examples to setup callback and
DISA with an Astlinux box?
Tried several times and something is not working right
Thanks.
http://www.zechendorf.com/2006/01/14/21/ (German)
http://blog.gramels.info/blog/archives/64-variable-asterisk-callback.html
How can I run the make menuselect option for asterisk itself ? I
would like to specify which options are compiled.
TIA
Julian
There is a package option Asterisk custom configure in the Astlinux
make menucon.fig
Michael
http://www.mksolutions.info
Hmm, enabled the option.
Now, I get
checking for gcc...
/usr/src/astlinux/trunk/build_i586/staging_dir/bin/i586-linux-uclibc-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run
C compiled programs.
If you meant to
Hello Lonnie,
We have checked 0.7 images and found that a new
build was created (3548). Unfortunately there is
no img file there and maybe it was missed when
the upload was performed.
Could you check it?
Best regards,
Ioan.
You could use that older image and then upgrade
via WebGUI or CLI.
Interesting behavior trying to upgrade.. It tells me Not enough
free space for new firmware on the RUNNIX partition. but If look at
the directory I have nothing else but the previous version and my
filesystem shows 93% full? Of course there will not be any room for
the download. But I
On Dec 29, 2009, at 11:28 PM, James F. Babiak wrote:
Darrick Hartman wrote:
On 12/29/2009 11:01 PM, James F. Babiak wrote:
Hey Darrick,
My build system was under Ubuntu 8.04 x86_64. I did it on a VPS I have.
Another person had this same issue with an Ubuntu build system. What
]
Sent: 31 December 2009 18:59
To: Michael Keuter; Philip Prindeville; Lonnie Abelbeck;
nnpait.servi...@googlemail.com
Subject: AstLinux Documentation Wiki
I'm still waiting for Kristian to get things set with the
domain name, but if you edit your 'hosts' file on your local
computer
Morning all
Can someone tell me what causes the GUI to give the error No version
available when one checks for new firmware? I am on 3417 with firmware
repository http://mirror.astlinux.org/beta-firmware. I've also just
successfully completed this procedure on another 3417 box (with the same
Lonnie,
Out of interest, what should /etc/localtime look like, and is it a
symlink? Same for /etc/TZ?
Thanks
Matt
/etc/localtime is a symlink to /tmp/etc/localtime which is also a
symlink to /usr/share/zoneinfo/Europe/Berlin in my case.
/etc/TZ does not exist (but I still have an /mnt/kd/TZ
On Jan 21, 2010, at 11:34 AM, Michael Keuter wrote:
Lonnie,
Out of interest, what should /etc/localtime look like, and is it a
symlink? Same for /etc/TZ?
Thanks
Matt
/etc/localtime is a symlink to /tmp/etc/localtime which is also a
symlink to /usr/share/zoneinfo/Europe/Berlin
On 02/01/2010 09:37 AM, Chris Abnett wrote:
Are there any plans to integrate SIPSAK into the astlinux system? I
have need for it.. tried to cross compile it and move it over to my
astlinux box but no matter what I do I always get ³/usr/bin/sipsak² no
such file or directory.. even though
I would like to make recording avilable to my
/stat/var/lib/asterisk/sounds/de/sprache folder
how can I make te folder writable and after recording are done make it back
RO
exten = _99XX,1,Wait(1)
exten = _99XX,n,System(mount -o rw,remount)
exten = _99XX,n,Wait(1)
exten =
Content-Type: multipart/alternative;
boundary==_NextPart_000_0013_01CAA962.49C07800
Content-Language: en-us
I notice everytime I reboot my astlinux machine
it always generates new host keys and so when I
got to SSH into it I get key errors in the case
of linux ssh Client I have to
Currently on the Status page (plus a couple of others - Speed Dials
comes to mind) I'm getting the error message The manager.conf
file is not enabled for 127.0.0.1 on port 5038.
A quick check of manager.conf indicates that the manager interface
is enabled for the web interface. The following
Hello all
A major issue with 0.7.1 seems to have transpired. I upgraded six or so
boxes last week, two of which use DAHDI. Asterisk seems to have failed to
run. When I try to start it from the command line, I get:
[Apr 7 09:40:18] ERROR[2705]: asterisk.c:3099 main: Asterisk has detected a
On Apr 7, 2010, at 3:42 AM, Tom Chadwin wrote:
Hello all
A major issue with 0.7.1 seems to have transpired. I upgraded six or so
boxes last week, two of which use DAHDI. Asterisk seems to have failed to
run. When I try to start it from the command line, I get:
[Apr 7 09:40:18]
Hello,
I dont know what else to do, every time I reboot AstLinux (on CF
Soekris) my misdn-init is overwritten with pmtp and my line is ptp.
I open CF write permissions and still it gets overwritten.
Any ideas ?
Joao
Put your misdn-init.conf on /mnt/kd/, then this will be used.
Michael
On Mon, 19 Apr 2010 12:27:29 -0700, John Reynolds reynold...@gmail.com
wrote:
On Tue, Apr 13, 2010 at 5:22 PM, Lonnie Abelbeck
li...@lonnie.abelbeck.com wrote:
On Apr 13, 2010, at 7:06 PM, John Reynolds wrote:
On Sat, Apr 10, 2010 at 1:43 PM, Lonnie Abelbeck
li...@lonnie.abelbeck.com wrote:
I use the same string as you, except hidden, and it works fine for me.
Do you have WIFI_ENABLE=yes, WIFIMODS and the BRIDGE0 in your users.conf?
Does lspci recognize your card?
--
Michael
This is what I have set:
BRIDGE0=eth1 ap0
WIFI_ENABLE=yes
WIFIMODS=ath5k
Correct.. I did read those.. im just curious to know if there is any
work-a-round at this point in time for me to make a build? I saw something
about a tarball and wondered if it could be obtained and if so would I just
untar it to my dl directory? Or would I host it on a local server and point
Slightly OT...
With an uncustomized 0.7.2 (1.4) on a net5501 with a berofix PRI, what is
the easiest way to attach an analogue fax which currently uses one DDI on
the UK PRI? Will an ATA work?
Thanks
Tom
Hi Tom,
what I've heard, is to best use an ISDN Terminal adapter like the TA33
1 - 100 of 744 matches
Mail list logo