How does it hook up to the electrical supply? Just alligator clips? How do you
match the wires if it's the latter? Just click them together and hope for the
best?
[Non-text portions of this message have been removed]
What do I need to know to install a garbage disposal? Obviously the size of the
drain and stuff like that, but anything else more specific? Thanks.
[Non-text portions of this message have been removed]
I've got a long round metal rod that came with my knife set. Are you supposed
to hold the blade perpendicular to the steel, that is, the ends of hte knife
and rod are at right angles to each other? Clarify your message a bit mire, in
other words, if ye wouldn't mind.
- Original Message
Oh yeah, I get things like that all the time. Try this.
This spring we went to our local hardware store. I was looking to buy some
nails and wire cutters. The sales clerk insisted on talking to my partner
rather than to me. Like What sort of nails is he looking for? I was like, I'm
standing
I have a full length leather duster here. It's starting to feel kind of dry
and not as supple as it used to be. What oils should I use on it, if any? It's
not suede, it feels kind of pebbly.
[Non-text portions of this message have been removed]
it still might not absorb real evenly.
Ron
- Original Message -
From: Robert Riddle
To: blindhandyman@yahoogroups.com
Sent: Saturday, October 04, 2008 1:16 AM
Subject: [BlindHandyMan] oiling a leather jacket
I have a full length leather duster here. It's starting to feel kind
That must get some interesting looks in the DMV office. BLind guy wanting to
register a car.
- Original Message -
From: Bob Kennedy
To: blindhandyman@yahoogroups.com
Sent: Saturday, August 23, 2008 8:01 PM
Subject: Re: [BlindHandyMan] Building a car
You can Google about
Well, I think we're going to have to end up buying a portable ramp. We rent, so
modifications to the property on such a scale may not be approved. This would
be a nice project to do, however, and as such it might add value to the
property after we move on.
- Original Message -
There's a nice thought. I'll keep you guys updated with what happens. I think
this project is one I can do, it just requires some planning and tedium. I'll
get hold hte landlord next week and see what he says.
- Original Message -
From: Betsy Whitney
To:
Our driveway is so old and pitted, I think we'd have to tear the whole thing
up and start over again. This thing has thigh high weeds coming out of it, 1 or
even 2 foot gaps between the paving blocks, six to 12 inch levels between the
blocks. I look at it and it seems almost hopeless to fix
I need to build a small ramp from the ground up on to the porch. How do I
figure out the gradiant? Like the porch is 39 inches off the ground, how long
should the boards be? Ideally the ramp should be cement but I don't know how to
do that and it's frankly beyond our budget to have a pro do it.
I got a dehumidifier last week. I turned it on and, within about 4 hours, the
tank, a 65 pint model, was full. I've been running it in 12 hour cycles for a
few days now. The difference down here is amazing.
- Original Message -
From: RJ
To: blindhandyman@yahoogroups.com
Sent:
. For awhile,
they would empty the container that caught the water. then, they got
smart and just placed the unit over the floor drain.
earlier, Robert Riddle, wrote:
I got a dehumidifier last week. I turned it on and, within about 4
hours, the tank, a 65 pint model, was full. I've been
Do they make talking hydrometers? I got a dehumidifier for our basement and I'd
like to keep a watch on the humidity down there.
[Non-text portions of this message have been removed]
it direct
you to the starting point.
Lenny
- Original Message -
From: Robert Riddle [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Friday, July 25, 2008 4:52 PM
Subject: Re: [BlindHandyMan] tractors
Doubt it, we're talking a couple of acres. I'll look into it though
want
is mowing, this might be something to look into.
Good luck.
Bill Stephan
Kansas Citty MO
Email: [EMAIL PROTECTED]
Phone: (816)803-2469
- Original Message -
From: Robert Riddle [EMAIL PROTECTED]
Date: Thursday, July 24, 2008 7:26 pm
Subject: [BlindHandyMan
Do any of you drive tractors? This place is just too much to mowe with a
standard lawn mower. So we're looking at tractors and I'm wondering if there's
any feasible way a blind person can use it.
[Non-text portions of this message have been removed]
Well, as this freezer is toast, whom should I call to dispose of it?
[Non-text portions of this message have been removed]
Ok, there's not much to a freezer, a pump compressor and thermostat, correct?
Our freezer, the one I wrote here about earlier, is broken, and I think it's
the compressor because the light stays on but the motor doesn't, and of course
everything thawed out. So, this being a Kenmore freezer, how
pre -charged from the manufacturer.
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of Robert Riddle
Sent: Tuesday, July 15, 2008 5:36 PM
To: blindhandyman@yahoogroups.com
Subject: [BlindHandyMan] refrigerant
Our freezer died. I
: [BlindHandyMan] refrigerant
I believe you are in for a sticker shock.
smile,
RJ
- Original Message -
From: Robert Riddle
To: blindhandyman@yahoogroups.com
Sent: Tuesday, July 15, 2008 7:57 PM
Subject: Re: [BlindHandyMan] refrigerant
Damn. I was afraid of that. Well I got
What does it mean when there is condensation between the panes of a double
paned window?
[Non-text portions of this message have been removed]
I've got a broken chair here. Made of metal. One of the bolts holding the back
of the chair to the frame broke off, leaving a small portion of the end of the
bolt in the hole. It doesn't stick out, so I can't get a grip on it. Any
suggestions on getting this little piece out so I can fit a new
Take all the furniture out. The carpet is held on by little pieces of wood
called tack strips laid around the edge of the floor. These are essentially
half inch wide strips of wood with a series of tacks jutting up, be careful as
they are extremely sharp. So, get all the furniture out and then
I always just rigged up wool blankets over the windows. The gf, however, won't
have that. Lol.
- Original Message -
From: Scott Howell
To: blindhandyman@yahoogroups.com
Sent: Thursday, May 29, 2008 6:01 PM
Subject: Re: [BlindHandyMan] Cellular blinds
Thanks Bob, I went
bought my sets from Leevalley.com.
I doubt you will find a spade bit big enough but you could get a
large auger bit for a hand brace bit.
Hope this helps.
- Original Message -
From: Robert Riddle
To:
mailto:blindhandyman
you will find a spade bit big enough but you could get a
large auger bit for a hand brace bit.
Hope this helps.
- Original Message -
From: Robert Riddle
To: mailto:blindhandyman%40yahoogroups.comblindhandyman@
mailto:blindhandyman%40yahoogroups.com
high speed drill bits that like any wood/metal cutting
bit will do this job quickly. Go through in larger and larger bits, and
the resistance will guide you from straying too far from the pilot through
hole.
On Fri, 23 May 2008, Robert Riddle wrote:
I'll be cutting a hole in a 2 by 6
I need to cut a circular hole in one of the boards comprising my picnic table
for the umbrella. Everything I've read says to use a circle cutter in a drill
press, which I don't have. Are there any other options?
[Non-text portions of this message have been removed]
I'll need to check the pole. I'll take a look in the archives too just in case.
- Original Message -
From: Tom Fowle
To: blindhandyman@yahoogroups.com
Sent: Friday, May 23, 2008 11:28 AM
Subject: Re: [BlindHandyMan] cutting a circular hole
robert,
Depends on the
plug. It
usually splits out easy then you can drill some more with the hole saw. Doing
this a couple of times will get you through the piece.
Ron
- Original Message -
From: Robert Riddle
To: blindhandyman@yahoogroups.com
Sent: Friday, May 23, 2008 1:19 PM
Subject
this helps.
- Original Message -
From: Robert Riddle
To: blindhandyman@yahoogroups.com
Sent: Friday, May 23, 2008 2:19 PM
Subject: [BlindHandyMan] cutting a circular hole
I need to cut a circular hole in one of the boards comprising my picnic table
for the umbrella. Everything
On a similar note, I want to put a railing on my garage steps. Remind me,
again, how to calculate slope to get the lengths of the ballisters right? Sixth
grade was a while ago.
- Original Message -
From: Victor Gouveia
To: blindhandyman@yahoogroups.com
Sent: Thursday, May 22,
Yah, I am gonna use screws, but I had a box of nails in front of me so that's
what I typed. Was hanging stuff up lol.
- Original Message -
From: Tom Fowle
To: blindhandyman@yahoogroups.com
Sent: Tuesday, May 20, 2008 12:10 PM
Subject: Re: [BlindHandyMan] studs
I can
Of the wooden kind, sheesh. Lol.
Seriously, I'm thinking of putting in a cabinet. How can one tell how far down
the studs are beneath the drywall? I don't want to buy a box of nails and find
out they're all too short.
[Non-text portions of this message have been removed]
Well I have a couple of projects coming up. A deck railing and a picnic table.
Our deck is funny. We've got two doors on it, with steps going off each door
and their own rail. I want to put a rail across the middle section of the deck
parallel to the house and attach it to the existing rail
fastened down with
two nails to hold it in place and then the carriage bolts making
assembly easy as pie.. I got my angle for the legs from a neighbors
table by just making a nail marking on my first `2 by 6. Lee
On Sat,
May 17,
2008 at 03:32:28PM -0600, Robert Riddle wrote:
Well I
they are on is very flat. Just something to consider. A bench with a back is
that much wider and if well constructed gives another couple of inches of depth
of base and that bit more stability.
What ever the case do have fun.
- Original Message -
From: Robert Riddle
To: blindhandyman
Now therre's an idea. I've never seen a table like that, though. I'll need to
go hunting.
- Original Message -
From: chiliblindman
To: blindhandyman@yahoogroups.com
Sent: Sunday, May 18, 2008 1:37 PM
Subject: Re: [BlindHandyMan] projects upcoming
Robert, one thing you
How do you mow the lawn being blind without you having to walk every inch to
make sure there's no rocks in your way? Getting someone to mow our lawn is very
expensive, and my girlfriend has degenerative spine disease and can't walk very
well. And can somebody tell me some good fuel mixes to use
be a change announced. That is the biggest complaint I have. But in most cases
1/16 is pretty close and for me a lot more accurate then using a finger nail to
read the other tape that is marked in eighths of an inch.
- Original Message -
From: Robert Riddle
To: blindhandyman
How do you calculate the number of square feet of several rooms? Is it just a
matter of adding the area of the individual rooms together?
For example, if one room is 30 square feet and another room is 20 square feet,
would that then be 50 square feet?
[Non-text portions of this message have
Our deck railing is a little wobbly. I suspect it's due to the expanding and
contracting of the wood around the bolts, due to the winter freeze and spring
thaw. Would fixing the bolts that connects the ballisters to the deck framework
fix this?
[Non-text portions of this message have been
Has anyone used this talking tape measure before? I'd like to get some feedback
before I buy anything.
http://www.lssproducts.com/product/4120/tape-measures
Thanks.
[Non-text portions of this message have been removed]
How does a blind person use a carpenter level? Isn't it a tool with a bubble of
water in it and when the bubble is even you know your piece is straight? How
can you tell if it's level when you can't see? Also, how good is this talking
tape measure I keep hearing about? How about electrical
Cool where do you find these audible levels?
- Original Message -
From: Victor Gouveia
To: blindhandyman@yahoogroups.com
Sent: Monday, May 12, 2008 4:20 AM
Subject: Re: [BlindHandyMan] tools and electricity
Hi Robert,
There are audible levels that will beep or sound if
to see where that circuit goes.
- Original Message -
From: Robert Riddle
To: blindhandyman@yahoogroups.com
Sent: Monday, May 12, 2008 3:23 AM
Subject: [BlindHandyMan] tools and electricity
How does a blind person use a carpenter level? Isn't it a tool with a bubble
of water
Probably needs a new electron gun, not sure how costly such things are.
- Original Message -
From: Jennifer Jackson
To: blindhandyman@yahoogroups.com
Sent: Monday, May 12, 2008 11:30 AM
Subject: [BlindHandyMan] microwave fixable?
I have one of these expensive Hamilton
- Original Message -
From: Dale Leavens
To: blindhandyman@yahoogroups.com
Sent: Saturday, May 10, 2008 6:39 PM
Subject: Re: [BlindHandyMan] condensate pump
Hi Ron,
Well I had a little look about and found some interesting reading here.
Well it has been a while since I was on list. Just got a new house and it's now
time to start sprucing it up.
My first question involves installing a garage door opener. We've got a metal
door with creases in it, I think they call that a sectional door? Anyway,
what's usually involved in
Can anybody tell me about these units? From what I hear it's a lot cheaper and
produces good heat. Where might I find these units?
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
Recently, my stepson broke the floater in the toilet tank. That big plastic
ball on the articulated arm that stops the water flow when it reaches a certain
level. So now, to flush it, we turn on the water from the wall valve. When we
do this, the pipes make a very loud rattling sound as if
stop some of the
rattling. Obviously, inside the walls would be an extremely expensive
proposition!
- Original Message -
From: Robert Riddle
To: blindhandyman@yahoogroups.com
Sent: Thursday, October 05, 2006 11:45 AM
Subject: [BlindHandyMan] rattling pipes
Recently, my
What can yall recommend for a good all purpose hand saw? I'm not really
interested in major woodworking, just the occasional board cutting. Thanks.
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
filling in the space on
each
side of the unit, preferably with material that is insulating. A lot of
heat can escape in winter, if these side spaces are not attended to
properly.
Yours Truly,
Clifford Wilson
- Original Message -
From: Robert Riddle
What's wrong with unplugging the freezer? lol.
- Original Message -
From: Jewel Blanch [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Tuesday, July 25, 2006 6:09 PM
Subject: Re: [BlindHandyMan] Defrosting a chest freezer
Once you have the ice off your freezer, wipe the
56 matches
Mail list logo
