On Tue, Nov 29, 2022 at 12:28 PM Mike Cizek W0VTT wrote:
> Jim AD1C wrote a utility program for importing ADIF files from contest
> loggers into DX4WIN. It works very well with N1MM, so I presume it will
> also work with an ADIF from DXLOG.
>
> https://ad1c.us/dx4win/adif2dxq/
With this
will
> also work with an ADIF from DXLOG.
> https://ad1c.us/dx4win/adif2dxq/
>
>
> 73,
> Mike Cizek W0VTT
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net On
> Behalf Of Luciano de la Rosa
> Sent: Tuesday, 29 November, 2022 12:06
>
-boun...@mailman.qth.net On
Behalf Of Luciano de la Rosa
Sent: Tuesday, 29 November, 2022 12:06
To: DX4WIN Reflector
Subject: [Dx4win] ADIF IMPORT
I have used the DXLOG program for contests.
At the end of the contest and export the ADIF file, at the time of saving
it, the following note appears
I have used the DXLOG program for contests.
At the end of the contest and export the ADIF file, at the time of saving
it, the following note appears: QSO comment. (I add a note)
But once imported, when opening the DX4win, that note appears in "notes for
this call."
Shouldn't he be in "Notes for
here each group is linked to a specific
contest. This is also a good way to separate your DX4WIN log into
different parts.
Scott/K7ZO
Message: 1
Date: Mon, 26 Oct 2020 10:17:49 +0100
From: Paul F6EXV
To: DX4WIN Refelector
Subject: [Dx4win] ADIF IMPORT
Message-ID:
Content-Type: text/plain; cha
Thanks Jim, as efficient as always !
73
Le 26/10/2020 à 16:15, Jim Reisert AD1C a écrit :
Hi Paul,
My recollection is that if you change " wrote:
Hi all
I have used DXLog to log contest QSOs over the weekend.
In order to get these QSOs in to the log, I export DXLog to adif, and
re-import into
Hi Paul,
My recollection is that if you change " wrote:
>
> Hi all
> I have used DXLog to log contest QSOs over the weekend.
> In order to get these QSOs in to the log, I export DXLog to adif, and
> re-import into DX4Win, which I think is the correct procedure.
> The DXLofg adif file has "CQ WW
08:09
To: Mike Cizek W0VTT
Subject: Re: [Dx4win] ADIF IMPORT
Attached is the screen that I get upon completion of the import.
As you can read, it says no errors, so this is probably why we cannot
find it with the word import in the note field (either one)
I wouild expect to be able to find out
, 2020 04:18
To: DX4WIN Refelector
Subject: [Dx4win] ADIF IMPORT
Hi all
I have used DXLog to log contest QSOs over the weekend.
In order to get these QSOs in to the log, I export DXLog to adif, and
re-import into DX4Win, which I think is the correct procedure.
The DXLofg adif file has "CQ W
Hi all
I have used DXLog to log contest QSOs over the weekend.
In order to get these QSOs in to the log, I export DXLog to adif, and
re-import into DX4Win, which I think is the correct procedure.
The DXLofg adif file has "CQ WW SSB" info as a "comment" field, and when
I import it, it re appears
Paul,
Thank you for your email. I just came to the 4U1WB shack and saved the
DX4WIN.iep file that Jim, AD1C, sent me in the SAVE folder. Lee, N7NU, also
suggested the same solution. Everything is fine now.
Lee and Jim,
Many thanks.
73,
Masa, AJ3M
On Mon, May 29, 2017 at 7:43 AM, Paul van der
Hi Masa,
Not sure if you got an answer on your question.
You will need to restore the DX4WIN.IEP file; I can mail that to you.
--Paul, KK4HD
On Fri, May 26, 2017 at 1:43 PM, Masa Miura, AJ3M wrote:
> For quite some time, I used the ADIF import filter to import
For quite some time, I used the ADIF import filter to import ADIF log files
created by DigiPan and JT65-HF by HB9HQX into DX4WIN.
For some reason, the ADIF import filter was deleted recently. How can I
restore the import filter?
Thank you.
73,
Masa
--
Masa Miura, AJ3M
Bethesda, MD
Email:
On Tue, Jan 6, 2015 at 9:26 AM, (K7ZO) Scott Tuthill wrote:
* Sometimes I have an ADIF file from another program I want to import into
DX4WIN but the ADIF tags don't match up and/or the import filter does not
import that field.
Scott, this program will do some of that, at least for contest
Following up from yesterday's post by K5IID is there any way to customize
the ADIF Import/Export filter?
* Sometimes I have an ADIF file from another program I want to import into
DX4WIN but the ADIF tags don't match up and/or the import filter does not
import that field.
* Sometimes I want
Hello,
just downloaded DXCC QSL Card Report from LoTW in ADIF version 3.0.4.
Included are indicators such as APP_LOTW_MODE:5:SPHONE and different from
DX4Win ADIF Import (Version 2). As a result, imported MODE is Defaults for
new QSO from DX4Win Setup Parameters in Preference file. In my
On Tue, Sep 24, 2013 at 5:05 AM, dl1...@web.de wrote:
just downloaded DXCC QSL Card Report from LoTW in ADIF version 3.0.4.
Included are indicators such as APP_LOTW_MODE:5:SPHONE and different from
DX4Win ADIF Import (Version 2). As a result, imported MODE is Defaults
for new QSO from
Try putting EOH as the 1st line of your ADIF import file..
Works for me..
73, Art W6KY
www.w6ky.com
From: NN3V_6 nn3...@san.rr.com
To: dx4win@mailman.qth.net
Sent: Sun, November 4, 2012 4:47:21 AM
Subject: [Dx4win] ADIF Import Oddity?
I've been using
Greetings all,
I've started playing with JT65-HF and wanted to import the ADIF file
that it creates. Apparently, it does not put a header in front of the
data which, according to the ADIF spec that I read, is optional.
However, when I try to import into D4W, it issues an error that the
header
On Sun, Mar 13, 2011 at 6:53 PM, David Kozinn, K2DBK wrote:
I've started playing with JT65-HF and wanted to import the ADIF file
that it creates. Apparently, it does not put a header in front of the
data which, according to the ADIF spec that I read, is optional.
However, when I try to import
The file actually doesn't have a header at all. The first line was a
CALL:6 just like any other data record. The issue seems to be that D4W
expects there to always be a header.
I re-read the spec, and it says:
Optional header information may be included before the actual data in
the file
and
If
On Sun, Mar 13, 2011 at 10:25 PM, David Kozinn, K2DBK k2...@arrl.net wrote:
The file actually doesn't have a header at all. The first line was a
CALL:6 just like any other data record. The issue seems to be that D4W
expects there to always be a header.
You just need an EOH at the top of the
Should be easy Brian;
1) Filter the QSO's in question - F8; select the group name; and maybe
that dates of the QSO's you need to change
2) Select QSO , Multiple QSOs operations, Set Group Number ; then
change Group number !!
I think thhat there was something special about ) by the way;
I'm running version 5.03 on an old computer system (long story). I have an
ADIF file that I transfer into DX4WIN and it when very smoothly, however all
the contacts went into Group 1 and should have been group 0. I do use group 1
from time to time for certain contacts, but not these ones.
When I try to import ADIF with the valid ADIF mode AMTOR D4W 8 rejects it.
When I try to import it with the DX4Win weird mode MTOR D4W 8 rejects
it even though it's a valid mode on the drop-down list.
One thing I was disappointed in ver 8 was that these odd, non-standard
D4W spellings for
One thing I was disappointed in ver 8 was that these odd, non-standard
D4W spellings for modes didn't go away.
Which ones specifically? I tried to get Paul to match the ADIF mode names from:
http://www.adif.org/adif223.htm#Mode%20Enumeration
Maybe there's a mismatch in the translation
: DX4WIN
Onderwerp: Re: [Dx4win] ADIF import confused about AMTOR
One thing I was disappointed in ver 8 was that these odd, non-
standard
D4W spellings for modes didn't go away.
Which ones specifically? I tried to get Paul to match the ADIF mode
names from:
http://www.adif.org
MTOR for AMTOR
PTOR for PTOR
PACK for PKT
Might be some others...
Jim Reisert AD1C wrote:
One thing I was disappointed in ver 8 was that these odd, non-standard
D4W spellings for modes didn't go away.
Which ones specifically? I tried to get Paul to match the ADIF mode names
from:
Hi Paul,
I have just installed the 7.06.02 release.
NOT changes found in the ADIF import anomaly that I have indicated to you
on june!!
So, try yourself
1) - Export a log in ADIF mode.
In the ADIF file produced you find the QSL_VIA field (This is
correct !!)
2) - Import the data from
Hi Paul,
Thanks for the 7.05 release.
But You forgot to fix the ADIF IMPORT routine.
I send again to You my email of Tuesday, June 10, 2008.
So if You want however to import the QSL_VIA MNGR,
(unnecessary for Dx4win), please redirect it to Notes for
this QSO field, and NOT to Notes for this
Hi Paul,
The QSLVIA field was recently included in the Adif export routine.
This is a very helpful add-on!!
Unfortunately, the import routine does NOT work on intelligent way.
In fact it should ignore this field, because dx4win have a separate qsl
manager database!!
Instead it loads the
PROTECTED]
To: dx4win@mailman.qth.net
Sent: Tuesday, June 13, 2006 4:43 AM
Subject: [Dx4win] ADIF Import question
Maybe this has been asked a 100 times before, but I can't find it... my
apologies if this is a dupe...
I am trying to import contest logs into DX4WIN, using the ADIF format. I
want
a task that cant be achieved with a little thought and
observation.
73 John ZL1BYZ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Alan Zack
Sent: Thursday, 15 June 2006 1:20 p.m.
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] ADIF Import question
June 2006 1:20 p.m.
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] ADIF Import question
This is the way I do it also. I use a new Group number for each contest
I import from CT. If you leave the SAME CALL window open all the time
(I do) the contest name you assigned to that Group number
Maybe this has been asked a 100 times before, but I can't find it... my
apologies if this is a dupe...
I am trying to import contest logs into DX4WIN, using the ADIF format. I
want the name of the contest imported, to be displayed as a Notes For This
QSO. The ADIF file has the name of the
FYI, I see just yesterday on this list, one part of my question was
addressed... how to remove the Frequency from being imported into the Notes
field:
Juha,
File | Import/Export
Select ADIF Filter
Filter | Edit
Check: Frequency
--Paul
Still looking for any cleaner ways to get the name of
Hello Jim and the reflector...
--- Scott Neader KA9FOX [EMAIL PROTECTED] wrote:
Still looking for any cleaner ways to get the name of the contest to
import into Notes.
The ADIF filter isn't configurable like the other import/export filters.
You can only do what's on Filter - Edit window.
] On Behalf
Of Scott Neader KA9FOX
Sent: Tuesday, 13 June 2006 4:43 p.m.
To: dx4win@mailman.qth.net
Subject: [Dx4win] ADIF Import question
Maybe this has been asked a 100 times before, but I can't find it... my
apologies if this is a dupe...
I am trying to import contest logs into DX4WIN, using
Can someone explain why I am getting the following error when I import and ADIF
file?
Error:Callsign=X where is the call sign of the imported data.
The call tag in the ADIF file meets the specification as far as I can determine.
It appears to process the line correctly as all the
Is it a good/valid callsign Jeff? Maybe it has an O where it should be
a zero or something.
John.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeff Steinkamp
Sent: Saturday, 21 January 2006 7:16 p.m.
To: DX4WIN Mail List
Subject: [Dx4win] ADIF import
From [EMAIL PROTECTED] Wed Jul 27 17:58:22 2005
From: [EMAIL PROTECTED] ([EMAIL PROTECTED])
Date: Wed Jul 27 17:58:06 2005
Subject: [Dx4win] Adif import
Message-ID: [EMAIL PROTECTED]
After some head scratching i appear to have loaded the new adif in, In
prefrences/qso i had the Upload Conf
N1MM Logger's ADIF export has the Contest_ID field in every QSO record. I
did as Alan suggested, and it does work, for a single COMMENT or a single
NOTES fields per QSO record. I'm now trying to get multiple COMMENT and
NOTES into their respective fields, as Alan says can be done, so that I
I'm trying to import my N1MM log into DX4WIN 6.03, and am having problems
understanding how DX4WIN decides which ADIF fields to import and where to
put them. For example, when I import an unmodified ADIF log, the import
goes fine, but for every contest QSO the frequency to several decimal
not attached to any QSO. I guess I never thought of attaching it.
Dave AA6YQ, what is your interpretation of this field?
73 - Jim AD1C
From [EMAIL PROTECTED] Thu Mar 17 06:02:29 2005
From: [EMAIL PROTECTED] (Marc Wullaert)
Date: Thu Mar 17 06:05:26 2005
Subject: [Dx4win] ADIF import quandary
Hi,
I want to import my contestlog from n1mm in to dx4win.
Some years ago I had a small program in dos to convert CT logs into
dx4win.But lost it
where in the dx4win NOTE FOR THIS QSO wass filled in with wat I want like a
special pfx or contest name .
I imported the adif file ,buth I see in the
Marc, I also use both programs and I do this all the time.
Just open your exported ADIF in WordPad or whatever, and do a search and
replace
(ctrl+H)
Replace EOR with:
comment:xxhere goes your commentEOR
where XX = number of characters (including spaces!) in your comment tag.
Be sure to
I expected that importing the LOTW records would update fields such as
State, County and Grid when they are blank. Did I do something wrong? Is
there a preference?
John, K2CIB
Yes, all the info is in the downloaded ADIF file.
John
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, January 22, 2005 3:32 PM
Subject: Re: [Dx4win] ADIF Import of LOTW
Is the information in your download, i.e. did you download using
I can see this being useful as an option, with settings like:
-Imported data does not replace existing data
-Imported data completely overwrites existing data
-Imported data only overwrites missing data
-User is asked on a per-item/per-QSO basis
You listening
List Server
Subject: Re: [Dx4win] ADIF Import of LOTW
I can see this being useful as an option, with settings like:
-Imported data does not replace existing data
-Imported data completely overwrites existing data
-Imported data only overwrites missing data
-User
Reflector
Subject: [Dx4win] ADIF Import
I'm having a problem importing my CAQP ADIF file. I notice that the first
QSO is marked EOH, and the rest EOR?
EOH
QSO_DATE:820041002 TIME_ON:6160637 FREQ:614.041 BAND:320m STX:11
MODE:2CW
CALL:4NO6X
SRX:19
ML:11
CNTY:3ALA
M:11
EOR
QSO_DATE
Hello. I created an ADIF version of my own log [log.adi] and I used this
ADIF file successfully to upload my log to the LoTW project.
However, when I try to import log.adi file into DX4Win 6.02 I got the
error: No header found;
and no QSO is read into DX4Win.
It's true that I have no header
Just export an ADIF log using DX4WIN and look at it.
- Original Message -
From: Andy [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Tuesday, October 14, 2003 10:41 AM
Subject: [Dx4win] ADIF import: header
Hello. I created an ADIF version of my own log [log.adi] and I used
53 matches
Mail list logo