Re: [Elecraft] K2 purchase considered

ith. - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.

[Elecraft] [K2] Interest in assembled K2?

to make back the cost of the kit; the time spent building the kit would be well worth it to me. Any thoughts on this? Thanks! - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent from: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] W1 Programming???

readout from the W1). I played around with trying to build an Arduino version .. thought it would be fun to display W1 output on an LCD ... I used SoftwareSerial on the Arduino, but never succeeded in getting it to talk to the W1. - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100

Re: [Elecraft] K2+KPA100 hi current and hi output

Hi, Andre - I wonder if it's a problem with blown D16 and D17 in the KPA100. If you follow this forum on-line at nabble.com, you can do a search for "D16" and see many postings on the topic. Good luck. - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 --

Re: [Elecraft] Best Audio Interfaces 2020?

. The UCA202 also has an optical stereo output, which I've used. My experience using either Windows or Mac OS is that it's much easier to interface with an external USB soundcard than it is using the audio in/out jacks on the PC. Nice device for not much money. Regards - Bruce K1FFX

Re: [Elecraft] [K2] Adding amplifier PTT out to K2

a PCB for the K2 fixed audio output mod). I'll be ordering the N0SS board when I get back North next month. Is there an "original" document that went along with the N0SS circuit, which might suggest where/how to mount the board, and where to pick up the K2's 8R signal? Thanks! - Bruce K1FFX

Re: [Elecraft] 10 MHz reference osc. suggestion?

bs: high quality, excellent build instructions, and very economical. If a sine wave is desired for your application, you could add an appropriate (probably 30 meter) LPF kit. Best - Bruce K1FFX ----- Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent from: http://elecraft.3657

Re: [Elecraft] [K2] K2 Speaker audio died

forum, to destroy the part and then easily pull the remaining pins or leads out, followed by the toothpick method for cleaning the holes, got the job done handily. In any case, audio is back ... this was an easy fix and I appreciate your support. Best - Bruce K1FFX - Bruce Rosen K1FFX K2

[Elecraft] [K2] K2 Speaker audio died

/100; haven't tried it with the low-power cover. I'd appreciate any suggestions on where I should start looking. I'm assuming some component has failed (the K2, built in 2010, is 9 years old). Thanks very much. Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent

Re: [Elecraft] My last word on operating

Just a note that W1MX is the MIT amateur radio club station. In the late 60s, hung out there with a close friend who was an MIT student ... luxuriated in the station's 75A4, CE200, and Model 19 Teletype! Best - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent

Re: [Elecraft] Who has the AX1 antenna DX record?

Worked KH6 from the Florida Panhandle on 17 and 15 meters running about 12 watts with my K2 and KAT100. The AX1 was mounted on a very short camera tripod and was out on our 3rd floor balcony as short distance from the Gulf. 73 - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1

Re: [Elecraft] KIO2 RS-232 to USB?

rom what I've read, the FTDI chipset, which the Startech product implements, is the best choice in this application. Best - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent from: http://elecraft.365791.n2.nabble.

Re: [Elecraft] AX-1/K-2/K-1

- Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] [AX1] It works

the radial to the tripod adapter. Happy camper here! Thanks, Elecraft ... nice product. - Bruce K1FFX (FN42ji) - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 KIO2 -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft

Re: [Elecraft] OT - Sources for Vintage Radio parts

Have a look at Antiques Radio Forum <http://antiqueradios.com/forums/viewforum.php?f=5> as well as the classifieds board at the same web site. Cheers - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 -- Sent from: http://elecraft.365791.n2.nabb

Re: [Elecraft] K2 Build: Requesting Tips and Tricks

Hi, Scott ... not sure if my reply is too late (I was away on an extended trip) ... if not, perhaps the blog I kept (text and photos) during my K2 build will be helpful: http://build-k2.blogspot.com/ Best - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 KAF2 -- Sent from

Re: [Elecraft] K2 C22 capacitor photos

You may have already resolved your questions on your K2 build. Just in case, however, perhaps this picture will be helpful: http://1.bp.blogspot.com/_zG6Z4v4VdYo/TKu5hUEt_MI/Afc/QCnzr2BVMik/s1600/rf_board_home_stretch.JPG Best - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2

Re: [Elecraft] KPA100 100% Duty Cycle - Operating Temperature

r e-mail (I saved it somewhere) on bleeding off static charges on the antenna to protect D16 and D17. Thanks! - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- Sent from: http://elecraft.365791.n2.nabble.com/ __ El

[Elecraft] KPA100 100% Duty Cycle - Operating Temperature

to the output transistors running key-down at the 20 watt level? Thanks for any tips or insight. Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing

Re: [Elecraft] Computer Utility Program for K2

Have a look at http://www.elecraft.com/k2_remote.htm, about 1/2 down the page. - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://elecraft.365791.n2.nabble.com/Computer-Utility-Program-for-K2-tp7633514p7633570.html Sent from the Elecraft mailing list

Re: [Elecraft] [K2]K2 filters continue to "drift" out of alignment

ies" moved back to about where they were when I first built the K2 and receiver performance has been restored. Thanks again for the advice. Best - Bruce K1FFX ----- Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-K2-filte

Re: [Elecraft] [K2]K2 filters continue to "drift" out of alignment

nt BFO drift. If I continue to see drift, then I'll go ahead deal with L33 (whose solder joints all looked fine to me yesterday) and reflow the BFO crystals' soldered leads. Thanks again! - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://e

[Elecraft] [K2]K2 filters continue to "drift" out of alignment

eally appreciate any pointers as to where I should be looking to fix the current situation (3 out of 4 filters not alignable) and hopefully finally resolve this. Thanks!! - Bruce - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://elecraft.365791

[Elecraft] [K2] Safely running 100% key-down modes

that normally the KPA100 will be loafing at 20 watts, but I'm not sure the impact of 100% key down on its output stage. I'd appreciate any guidance in keeping the K2/100 safe in these modes. Thanks - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context

Re: [Elecraft] RTTY in days of old

Baudot support to an open-source serial port terminal emulator I found on the web and use it with the HD-3030 and my TS-850's FSK port. Works great ... just confirmed Corsica on 20M RTTY. Cheers - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context

[Elecraft] [K2] N1MM Logger with KPA100

to commands (like SW01; as suggested in the KPA100 manual). I tried both 1 and 2 stop bits. Any suggestions would be much appreciated. - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-N1MM-Logger-with-KPA100

Re: [Elecraft] [K2] N1MM Logger with KPA100

March and it is on-line. Thanks - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-N1MM-Logger-with-KPA100-tp7576690p7576695.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] [K2] N1MM Logger with KPA100

that was current at that time. But not with new PC! I pulled the jumper out and it now works fine with N1MM logger on the new PC. So, KPA100 serial cable builders ... keep an eye out for this one ... that jumper may disable K2 to PC communications. Thanks again, Don. - Bruce K1FFX - Bruce Rosen

Re: [Elecraft] Rework eliminators

K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 KAT100-1 -- View this message in context: http://elecraft.365791.n2.nabble.com/Rework-eliminators-tp7573965p7573978.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] [K2] Power supply for KAT100-1

? Thanks again! Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Power-supply-for-KAT100-1-tp7571004p7571032.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] [K2] Power supply for KAT100-1

for powering the KAT100-1. However, the adaptor is marked for use with information technology equipment. So, I'm not sure what it's warning me about. I'd appreciate any advice as to whether this would be an appropriate power supply for the KAT100-1. Thanks - Bruce K1FFX - Bruce Rosen K1FFX

Re: [Elecraft] KPA 100 L16 and RFC1

OK and I was able to secure the two parts to the board ... neither of them ended up flopping around, and no additional glue material was needed. Cheers - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA-100-L16

Re: [Elecraft] photos K2 options

Perhaps some of the KPA100 photos that I posted while building the KPA100 will be helpful. You can find them at several blog posts starting with http://build-k2.blogspot.com/2010/12/getting-kpa100-underway.html. Best - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 KSB2 -- View

Re: [Elecraft] Getting ready to order a K2 - which options

. But I agree that it probably wouldn't make sense to retrofit the kit into an existing K2. - Bruce - Bruce Rosen K1FFX K2/100 6982 KSB2 -- View this message in context: http://elecraft.365791.n2.nabble.com/Getting-ready-to-order-a-K2-which-options-tp7562628p7562791.html Sent from

[Elecraft] [K2] KAF2 Demo Sound Files?

- Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-KAF2-Demo-Sound-Files-tp7558437.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] My K2/100 keeps resetting at high power

I'm glad that switching to a bigger Astron supply solved your problem. I would note, however, that I've been running my KPA100 with an Astron 20 at the 100 watt level for the past year with no problems. Best regards - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 -- View this message

Re: [Elecraft] KAF2 or KDSP2 for K2?

for more filtering during recent ARRL CW DX and CQWW CW contests. The K2 is already so much quieter than its predecessor (a Kenwood TS850) that I don't really feel the need to add the noise quieting benefits of either the KDSP2 or KAF2. - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message

Re: [Elecraft] Tracking down S9+ noise on 40M

horrific RF noise on 40 meters (and below). A call to the local power company (with the pole number) ... they come and replace the lamp fixture ... has always fixed the problem - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] K2 #7261 Thermistor board question

.blogspot.com/2010/09/lots-of-capacitors.html http://build-k2.blogspot.com/2010/09/middle-of-page-54.html Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-7261-Thermistor-board-question-tp7163381p7163417.html Sent from the Elecraft

Re: [Elecraft] K2 alignment tool XG2 or XG3

I used the N-gen ... worked fine for initial alignment and, together with the free version of Spectrogram, worked very well for filter alignment. Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-alignment-tool-XG2

Re: [Elecraft] Control Board C4 part 474

on the bottom of the control board. Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/Control-Board-C4-part-474-tp7118539p7118941.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] [HAM] 20 meter QRP brick?

meter rig). Any suggestions for other products (preferably in kit form) much appreciated! Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/HAM-20-meter-QRP-brick-tp7106668p7106668.html Sent from the Elecraft mailing list

[Elecraft] [HAM] DXCC Rule 9

for DXCC, Rule 9 comes as a pleasant surprise. Cheers - Bruce K1FFX - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/HAM-DXCC-Rule-9-tp7075154p7075154.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] [HAM] Looking for manual for Ballantine 300E VTVM

hoping someone out there has the manual and would be willing to scan it for me. Please reply off-list. Thanks in advance. - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/HAM-Looking-for-manual-for-Ballantine-300E-VTVM

Re: [Elecraft] used K2 Alignment

the calibration, but I found that I already was within a few hertz using the method described at Don's site (!). - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/used-K2-Alignment-tp6997545p7006107.html Sent from the Elecraft mailing list

Re: [Elecraft] CocoaModem

Input device correctly (it will default to Built-in Microphone and needs to be set to your particular device).Maybe one of these has tripped you up (?). Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/CocoaModem

Re: [Elecraft] CocoaModem

(output) section of the PSK config screen (assuming you've got the output device set correctly). This will again depend on how you've got the soundcard-to-rig cable on the transmit side wired. Sounds like you're close to success ... good luck! - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View

Re: [Elecraft] K2 Crystal Grounding Leads

You might also have a look at my comments/pic at the blog I kept during K2 construction: http://build-k2.blogspot.com/2010/09/grounding-crystals.html Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Crystal-Grounding

Re: [Elecraft] Heathkit Returns!

in the mid-80s, and now back on-line and still going strong after re-peaking the filters. Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/Heathkit-Returns-tp6773873p6774410.html Sent from the Elecraft mailing list archive

Re: [Elecraft] possible cataclysmic blow to amateur radio

Probably worth pointing out that heisse luft is German for hot air. Don't think I'd lose too much sleep over this one. - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/possible-cataclysmic-blow-to-amateur-radio-tp6470472p6470494.html

Re: [Elecraft] U1 on Control Board (K2)

Have a look at the parts list in the K2 manual. In the description column for U1, (SA612) is listed as an alternate part. You're good to go. Enjoy building! 73 - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/U1-on-Control

Re: [Elecraft] Weird K2 tuning thing (hand capacitance)

-over washers, on each of the stand-offs on the bottom-side of the K2 to move the bottom panel further away from L33. While this was not proof that L33 was the problem, it did make the problem go away. Cheers - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View this message in context: http

Re: [Elecraft] [K2] Kit Building Time ?

) sessions from mid-December to mid-January. Estimated construction time somewhere between 30 and 40 hours (and, I'm guessing, closer to 40). Big chunk of time went into constructing the power cable ... I'd buy it pre-assembled next time. Regards - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View

Re: [Elecraft] [K2] Kit Building Time ?

good) and I always compared against the schematic if I thought I might have a solder bridge (never happened). BTW, also wound my own toroids ... I actually found that to be one of the more enjoyable activities of the K2 build. Enjoy the build! - Bruce - Bruce Rosen K1FFX K2/100 6982 -- View

Re: [Elecraft] K2 Kit Questions

it will be handy, but I'd do it mostly for the pleasure of building another mini-module! Cheers - Bruce - Bruce Rosen K1FFX k2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Kit-Questions-tp6002462p6078821.html Sent from the Elecraft mailing list archive

[Elecraft] [K2] Loose screws on KPA100 Q1 and Q2

... all 4 screws were loose and required the suggested 1/8 turn. And, as long as I have the top off, I'm seeing if can route the ribbon cable more optimally, and will tweak the filter alignment. Cheers - Bruce - Bruce Rosen K1FFX k2/100 6982 -- View this message in context: http://elecraft

Re: [Elecraft] [K2] Loose screws on KPA100 Q1 and Q2

the front. I've been fighting with that ribbon cable from day 1 ... thanks for the helpful observation and tip, Don. - Bruce - Bruce Rosen K1FFX k2/100 6982 -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Loose-screws-on-KPA100-Q1-and-Q2-tp6078966p6079168.html Sent from

Re: [Elecraft] KPA100 trimmer caps C1 C27

Perhaps one of these pics on my construction blog will help. Have a look at http://build-k2.blogspot.com/2010/12/lots-of-kpa100-capacitors.html and http://build-k2.blogspot.com/2011/01/kpa100-completed.html Cheers - Bruce - Bruce Rosen K1FFX k2/100 6982 -- View this message in context

Re: [Elecraft] K2/100 birdie at 28.020 MHz

You might find some helpful information in http://elecraft.365791.n2.nabble.com/K2-KPA100-birdie-at-21029-tp5972747p5972747.html this recent post. - Bruce - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-100-birdie-at-28-020-MHz

[Elecraft] [K2] KPA100 birdie at 21029

21029.03 low tone 21029.04 not heard Ideas? Thanks a lot - Bruce - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-KPA100-birdie-at-21029-tp5972747p5972747.html Sent from the [K2] mailing list archive at Nabble.com

Re: [Elecraft] [K2] KPA100 birdie at 21029

Additional info: The birdie also goes away when the power setting is clicked below 11 watts. - Bruce - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-KPA100-birdie-at-21029-tp5972747p5972808.html Sent from the [K2] mailing list archive

[Elecraft] [K2] K2's frequency counter cable with KPA100 installed

experience with this? Do you hear a notice-able increase in spurious signal amplitude? If the answer really is yes, remove the cable, is there any other way, short of disassembling the K2/100 and inserting the cable, to align the K2's filters? Thanks! - Bruce - Bruce Rosen K1FFX -- View

[Elecraft] [K2] Frequency counter cable with KPA100 installed

of disassembling the K2/100 and inserting the cable, to align the K2's filters? Thanks! - Bruce - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Frequency-counter-cable-with-KPA100-installed-tp5964552p5964552.html Sent from the [K2] mailing list

[Elecraft] [K2] K2, KPA100, N-GEN, W1 Construction Blog

- Bruce K1FFX - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-K2-KPA100-N-GEN-W1-Construction-Blog-tp5937734p5937734.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] K2 BFO Drift / Filter Alignment

is apparently fixed; I'm hoping there will be no further drift. Thanks to all for your help. - Bruce - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-BFO-Drift-Filter-Alignment-tp4236424p5909401.html Sent from the [K2] mailing list archive

[Elecraft] KPA100 Page 44 Resistance Measurements

that this behavior is OK. Thanks - Bruce - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA100-Page-44-Resistance-Measurements-tp5905235p5905235.html Sent from the [K2] mailing list archive at Nabble.com

Re: [Elecraft] K2 BFO Drift / Filter Alignment

Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-BFO-Drift-Filter-Alignment-tp4236424p5893450.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http

Re: [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?

- Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-KPA100-How-to-install-chokes-RFC6-7-8-9-near-J8-tp5884505p5893520.html Sent from the [K2] mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] K2 BFO Drift / Filter Alignment

. Check to see if your K2 is sitting on its feet properly. If you have something under the K2 or have it on an uneven surface, it may be deforming the bottom cover slightly when you press on the top. 73, Don W3FPR On 1/5/2011 3:32 PM, K1FFX wrote: I'm wondering if there was any

Re: [Elecraft] K2 BFO Drift / Filter Alignment

to be done about it. Now that I know, I'll just need to avoid pushing on the case, particularly from the bottom. Will realign filters once more and see if they stabilize. Thanks for the help! - Bruce Rosen K1FFX -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-BFO-Drift

Re: [Elecraft] K2 / KPA100: How to install chokes RFC6-7-8-9 near J8 ?

suggest you still check (as mentioned in the manual) with an ohmmeter that there is good DC contact through each of the RFC 6-7-8-9 to be sure that the bending of the leads does not cause for internal breakage ? - Bruce Rosen K1FFX -- View this message in context: http://elecraft