?)
--
Buck, K4IA
DXCC Honor Roll
8BDXCC
Author EasyWayHamBooks.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
VGA board and cables
Beautiful condition w/Cady Book
$700
Together $3,600 Plus shipping USA only ($100?)
--
Buck, K4IA
DXCC Honor Roll
8BDXCC
Author EasyWayHamBooks.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
You got a heck of a deal. I've seen those P3/VGAs go for $800 or more.
Buck, K4IA
DXCC Honor Roll
8BDXCC
Author EasyWayHamBooks.com
On 1/16/2023 3:40 PM, Jim Brown wrote:
On 1/16/2023 7:14 AM, Marc via Elecraft wrote:
I rarely do not post a price when selling, but I am not sure what
ce
lowers the impedance.
Buck, K4IA
DXCC Honor Roll
8BDXCC
Author EasyWayHamBooks.com
On 12/20/2021 9:49 PM, David Herring wrote:
Pete,
Yes. You either have to have lots of them, or you need to get bigger ones and
run multiple turns through them. Also get the right “mix” for the freque
Bond the computer case and radio with strap. That provides an alternate
path for RF reducing the amount on the USB cable.
Buck, K4IA
DXCC Honor Roll
8BDXCC
Author EasyWayHamBooks.com
On 12/19/2021 7:24 PM, David F. Reed wrote:
Due to some HOA C, I am confined to attic and gutter antennas
ution" will be proven wrong.
Buck, K4IA
DXCC Honor Roll
8BDXCC
Author EasyWayHamBooks.com
On 10/21/2021 9:35 AM, Julia Tuttle wrote:
But remember, you're required to use the lowest power level feasible...
...so time to try for some really challenging DX, and keep your logs!
Seriously though, di
In the utility, you tell the K3 which filters are installed. They kick
in when you narrow the DSP to within their range. You can select when
they kick in in another setting.
Buck
k4ia K3 #101
Honor Roll 335
8 Band DXCC
On 7/3/2016 10:23 AM, Bill Leonard N0CU wrote:
I am uncertain on how
The CM500 is offered on Amazon for $59. Don't know about shipping to
the Falklands.
Buck
k4ia K3 #101
Honor Roll 334
8 Band DXCC
On 5/26/2016 11:44 AM, Brian Denley wrote:
I use the Koss SB45 headset. Works very well.
Brian Denley
KB1VBF
Sent from my iPad
On May 26, 2016, at 10:14 AM
Those extremely wide ragged looking signals are probably all the hounds
chasing the DX fox. You are seeing multiple signals, not one ragged one.
Buck
k4ia K3 #101
Honor Roll 333
8B DXCC
On 1/14/2016 11:48 AM, Amateur Radio Operator N5GE wrote:
Is there something wrong with my P3, or are all
Does anyone have a serial number for the changeover? I don't see
anything on the Elecraft wab page.
Buck
k4ia K3 #101
Honor Roll 333
8B DXCC
On 10/20/2015 11:58 AM, ok1rp wrote:
Hi Jack,
if your KPA500 has LPF board rev. D or earlier then You will need to make
LPF TR Switch Rework REV5
Just sailed through security at Reagan National, JFK and El AL on my way to
Israel. Had the KX3, a wire antenna and coax in the carry on. Those are some
of the toughest security check points in the world. No one asked a question or
wanted to open the bag.
Listen for 4x/k4ia
the rig back to
RX mode.
Ideas?
--
Buck
k4ia K3 #101
Honor Roll 333
8B DXCC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I have noticed that the RF gain on the Sub RX will often drop way down.
I recall it happens when the SUB RX is first engaged. But twisting the
knob a bit brings it right back up. This happened at FD when I was
using the Sub Rx to SP listening between CQs.
Ideas?
--
Buck, k4ia
DXCC Honor
purchase had so many faults he couldn't find.I feel sorry for him.
Bambershoot is being held on $10,000 bond.Police are still searching for
the elusive Ellie Craft.
--
Buck
k4ia
__
Elecraft mailing list
Home: http://mailman.qth.net
solution in search of a problem. What
was wrong with the good old Molex?
To keep this on an Elecraft related topic, I just hope these things
don't show up on any more wonderful Elecraft equipment.
Buck
k4ia
On 2/17/2015 5:08 PM, Terry Schieler wrote:
Similar to Phil's approach, rather than
. Then put tape around the junction. Cross your fingers.
Buck
k4ia
K3# 101 KX3 #715
On 2/17/2015 9:58 AM, Chris Hallinan wrote:
Hi list,
I've noticed that almost every time I move my K3, it powers down. I
have little doubt it's the power pole connectors. I soldered them,
and I'm pretty good
-tone filtering in the K3 or Icom's twin-peak filter.
It is on slide 3 of the Advanced RTTY Contesting presentation available
in the Files section on the Contest University website.
Buck
k4ia
K3# 101 KX3 #715
On 2/16/2015 12:47 PM, dm...@nexicom.net wrote:
David Moes
VE3DVY
Since I find
for countless reasons. Somewhere along the line, after you
have been lulled in, this will degenerate.
I an in a business where we are targeted every day with increasingly
sophisticated and believable stories. When in doubt, just say no.
Buck
k4ia
K3# 101 KX3 #715
On 12/12/2014 6:26 PM, Nick Kemp
USB or serial port polling? Try a different adapter or one that uses an
optoisolater
Craig Buck
On Oct 5, 2014, at 5:36 PM, Brian F. Wruble bwru...@gmail.com wrote:
Hi All:
The symptom I am describing persists despite changing routers, internet
systems, and cities. In a QSO this
and you want them to be the same you have to
set the Sub AF Gain knob to the middle.
Buck
k4ia
K3# 101 KX3 #715
On 7/19/2014 5:11 PM, Mike via Elecraft wrote:
I know I'm probably stupid and missing something obvious, but when I turn
on the sub receiver it is much louder in my right ear than
including Mechanical Breakdown. The two policies are very
different so review them to decide which is best for you.
If you love your K Line as much as I do, you'll get it insured.
Buck
k4ia
On 7/15/2014 6:58 AM, Bill Blomgren (kk4qdz) via Elecraft wrote:
And another warning: Nearby (like next
Does it draw current when turned off? If so, you have a shorted final
transistor.
Craig Buck
On Jun 14, 2014, at 7:04 PM, Robert 'RC' Conley rc.kc...@gmail.com wrote:
how can a K3 have a Hi Cur display while in the receive mode?
The K3 mutes slightly when Hi Cur is displayed
KC5WA
to even them out with the RF Gain control on the K3 but I will play
around with that some more.
Buck
k4ia
On 4/29/2014 11:43 AM, Buck - k4ia via Elecraft wrote:
Joe - that is what I have set up. If I turn on the Sub Rx and plug a
set of headphones directly into the K3 Line Out jack
Thanks Sam but that isn't it. I get the Sub RX audio just fine in the
headphones.
What I am missing is the Sub Rx on the right channel of the Line Out
jack on the back of the radio.
Buck
k4ia
K3# 101 KX3 #715
On 4/28/2014 10:57 PM, Sam Morgan wrote:
also you might have the sub set to AUX
the K3 that is missing, not an issue with the computer or MKII.
Buck
k4ia
K3# 101 KX3 #715
On 4/29/2014 8:05 AM, Sam Morgan wrote:
hmmm, what is your Line Out set to?
mine is the recommended 010
also is the computer a desktop or laptop?
On 4/29/2014 6:47 AM, K4ia wrote:
Thanks Sam
jack on the front. This is the first
time I have tried to listen to the Sub Rx through the rear Line Out
jack. I was hoping it was a menu setting I was missing. I will check
L2. I guess you are telling me it could be open? Why would that happen?
Buck
k4ia
On 4/29/2014 9:50 AM, Joe Subich
please?
--
Buck
k4ia
K3# 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
in the center of the passband.
Buck
k4ia
On 3/31/2014 10:52 AM, George Danner wrote:
One of the things that Bell Labs found in adding loading coils to phone
lines (to reduce the high frequencies) was that in an audio system if you
reduce the high frequencies then you needed to also reduce the low
+adapter
Buck
k4ia
On 3/25/2014 12:10 PM, Slava Baytalskiy wrote:
What exactly is the function of this device? Does it give you 8 separate serial
ports? Or is it just a hub? Is it somehow different from plugging 8
USB-to-serial cables into a computer?
Thanks!
Slava Baytalskiy
sla
around looking for the action. When working split you can see
where everyone is calling and spot the hole where you can slip in and be
heard.
Get one and you will be amazed.
Buck
k4ia
On 2/28/2014 1:08 PM, Jim Lowman wrote:
I'm basically a SP operator, especially in contests. I've found
.
I am pretty sure RF on the feed line would cause the tuning circuits in
the KAT to act crazy. I'll leave that one for the Elecraft gurus to
answer.
Buck
k4ia
On 1/8/2014 5:57 AM, Ray Coles wrote:
As the original poster under this heading I figured you might be interested
to know what I have
all your connections.
Lesson 2. Stop buying cheap coax connectors
Buck
k4ia
On 12/30/2013 2:13 PM, Ray Coles wrote:
Forgot to mention that I hauled my MFJ wattmeter/dummy load out to the bush and
pushed up 100 watts into it down the feeder with 1:1 SWR, which convinced me
that at least my UR8
That points to a common connector as the problem Check your common connector
- something before the antennas.
Craig Buck
On Dec 30, 2013, at 3:14 PM, Jim Bennett w6...@mac.com wrote:
They are on all of MY various HF antennas: doublet, Inverted L's, and a
ground mounted vertical.
Is it possible that your antenna is tuned already? If it weren't, and
the SWR were too high, you would not get 500 watts out of the amp. You
would get a FAULT message and the whole thing would shut down.
Buck
k4ia
On 11/12/2013 2:40 PM, Jim Bennett wrote:
Folks, sorry if this has been
when I am not around.
Buck
k4ia
On 10/16/2013 3:59 PM, Fred Jensen wrote:
K3 #642 measures just over 4mA when off. FT-847 reads 12mA. However,
with both those loads on the FP-1030A power supply, it appears to be
consuming about 3wH [72 watt-days/26.28 kw-years], apparently just to
light
I use both the W2 and the KAT500. The W2 is closest to the antenna and
tells me what the SWR really is. The KAT500 tells me what the
transmitter is seeing. You really need both.
Buck
k4ia
K3 # 101 KX3 #715
On 9/2/2013 6:44 PM, Don Wilhelm wrote:
Jim,
Under normal operation
I took an Altoids tin and cut a piece of foam to fit the paddles. I
remove the paddles and put them in the tin for transport. Altoids tin
weighs next to nothing and the paddles are safe.
Buck
k4ia
K3 # 101 KX3 #715
On 6/30/2013 1:49 PM, Ron D'Eau Claire wrote:
Is the key paddle rugged
Thanks for the try Tom. No it is not transmitting. In fact, it is even
weirder than that, the finals heat up while the radio is turned off. It
draws 2 amps when off.
Buck
k4ia
K3 # 101 KX3 #715
On 4/27/2013 7:43 PM, Tom H Childers wrote:
Howdy Buck,
The first thing that comes to mind
to cool it down is to unplug the power.
Any ideas?
--
Buck
k4ia
K3 # 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
in and
a little under 4 amps in receive when turned on.
I was biased toward the bias but don't understand why it is drawing 2
amps of current while turned off.
I have not installed the gold connector mod yet. KPA3CONMDKT Any
chance the problem is there?
Buck
k4ia
K3 # 101 KX3 #715
On 4/27/2013
Check the date on the article. He says they made mods to the later models.
Craig Buck
On Feb 10, 2013, at 12:06 PM, Gil G. g...@keskydee.com wrote:
This is what I found:
http://www.frenning.dk/OZ1PIF_HOMEPAGE/SignaLinkUSB-mods.html
k4ia
On 1/17/2013 10:39 AM, Brian Alsop wrote:
Now if we only had some decent labels to stick on those 10 switches
Conventional computer labels seem to last a couple weeks before
peeling off. Tiny writing isn't my strength so they are cryptic and
only marginally readable. M1-M4 require diagonal
- they were terrible (shorted). I have since gotten
the Elecraft cables but not had a chance to try them. What iSDR app are
you using?
Buck
k4ia
K3 # 101 KX3 #715
On 12/29/2012 5:48 PM, GDR wrote:
I am in need of advice. I have the newer iPad 2 and am having no luck getting
it to work
K3/KX3.
Buck
k4ia
On 12/14/2012 1:37 PM, Bill Hammond wrote:
Vibroplex makes several different weights for these bugs. However, I always
just used the large solder wrapped on top of the original weight. The new
weights are on this page:
http://vibroplex.com/accessories.html
73,
Bill
AK5X
I have found that I must be sure to screw in (not just plug in) the
serial connector on the back of the K3. If I don't, I will hear a
pulsed rushing noise from the USB.
Buck
k4ia
On 12/13/2012 12:53 PM, Matthew Zilmer wrote:
USB uses differential signaling. Your problem may
Check your filter locations and make sure they are selected. As I recall you
must instal the filters in slot 1 then 2 then 3. In other words, no skipping
over slots.
Craig Buck
On Nov 28, 2012, at 6:19 PM, Mike Sanders k...@centurytel.net wrote:
Well, I think I have found it. I have not
you want to hear will be just above the silence. Then,
set the AGC controls to the defaults or follow some of the other
suggestions on this list.
Buck
k4ia
K3 # 101 KX3 #715
On 11/23/2012 11:00 PM, Mike Rodgers wrote:
I've been putting up with this hiss on receive for two years. Others have
are on the MicroHam USA website. Photos
on request. Excellent condition.
$250 including shipping in the US.
--
Buck
k4ia
K3 # 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
You just made the mistake of spotting the DX BEFORE you worked it. Now
the pileup begins in earnest.
Buck
k4ia
K3 # 101 KX3 #715
On 10/19/2012 8:53 AM, John Fritze wrote:
So I got a notice today that the ARRL is offering a KPA500 in their on line
auction...how do I get all you guys
and you wouldn't want to use a laptop to do high
resolution gaming, video editing or multiple DVD burning.
So, ask yourself, what do you want to do? Most will say you need both.
Buck
k4ia
On 10/16/2012 4:22 PM, KF9QL wrote:
Hello all, Tom here. I am new to all-things Elecraft and have been
figure out where the DX is listening.
Therefore, I elected no special filters in the sub. If you use the sub
for diversity reception, you probably need to filter it up.
Buck
k4ia
On 9/25/2012 1:20 PM, Stan AE7UT wrote:
I'm asking for a little help with filter choices. I've read all I can
I think NAP3 stands for Not A P3
Buck
k4ia
K3 # 101 KX3 #715
On 9/11/2012 10:46 PM, Ron D'Eau Claire wrote:
It's a great example of why acronyms are absurd if you want to communicate
anything to others outside of an exclusive small group.
It's been a problem as long as I've been writing
I like the clever design of the control head but -
Upconversion
Over 6 pounds
1.2 Amp on standby
No internal antenna tuner mentioned
Mandatory D-$tar
Seems like a combination of the worst of the old and new in what is
likely to be a very expensive package.
Buck
k4ia
K3 # 101 KX3 #715
On 8/26
someone else can cite a dependable source.
Buck
k4ia
K3 # 101 KX3 #715
On 8/20/2012 8:44 AM, Jeff Herr wrote:
This is a radio shack item?
WW6L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
work remaining to be done.
Buck
k4ia
K3 # 101 KX3 #715
On 8/18/2012 6:39 AM, Stephen Prior wrote:
Both of the 3.5 to 2.5mm pigtail adapters I bought from Amazon were not
wired correctly, with no connection at all to the ring (if I remember
correctly). Cheap doesn't always pay in my
.
This is telling me there is something wrong with the cables but I have
switched them out, including the 2.53.5 adapter to no avail. Now, I am
suspecting the I/Q jack on the KX3 but that seem unlikely.
Anyone have an idea for me to try?
--
Buck
k4ia
K3 # 101 KX3 #715
Try reversing the cables.
Craig Buck
On Aug 11, 2012, at 11:13 AM, Ignacy n...@arrl.net wrote:
I connected KX3 to a laptop and ran HDSDR. It appears that sideband are not
distinguished as during tuning some signals move left and some move right.
Also no movement on phase pictures.
I
Very well done indeed. But, I am confused. How is the ranking decided?
Is it subjective or is there a formula?
--
Buck
k4ia
K3 # 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
My thought on the 5 pole was that it would give you some protection but because
the skirts were not as steep you could hear someone calling you off frequency
better. They would be down but not out. The 5's have slightly less insertion
loss and are cheaper. On the other hand they need an offset
Those holes are for the KXPD3 paddles - you can ignore them. Elecraft
always gives you some extra hardware - just in case.
Buck
k4ia
On 8/7/2012 11:36 AM, Kevin Luxford wrote:
When I finished the build of the KX3, there were a couple of small flat
head black screws left over. I found
and connectors.
--
Buck
k4ia
K3 # 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
and PF2, how do I assign macros to other
keys? The K3 had the M1 - M4 keys but they are not on the KX3.
--
Buck
k4ia
K3 # 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
thumbscrews with a screwdriver slot?
--
Buck
k4ia
K3 # 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Good ideas. I hadn't tried to take the paddles apart yet.
Maybe I'll send it off to Pierro Begali and see what he would design.
Probably end up with paddles that cost as much as the rig - but they
would be beautiful!
Buck
k4ia
On 7/16/2012 7:18 PM, Art Nienhouse wrote:
Hi Buck
Lighter
Is there an adjustment for the spring tension? I am spoiled by my
Begali and these feel like I am lifting weights.
--
Buck
k4ia
K3 # 101 KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
. Then you did the impossible and
kitted it out. Amazing.
--
Buck
k4ia
K3 # 101
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
- but that wasn't enough.
Anyone have an idea before I whittle down the speaker plug?
--
Buck
k4ia
K3 # 101
KX3 #715
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
No longer needed so now it needs a new home.
New $89.95 plus shipping. I'll sell for $75 including shipping to US.
PayPal preferred.
--
Buck
k4ia
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
cotton picken hands in sur pockets.
Pencil necken geeken farbs - relaxen, und vatchen das blinken lights.
Buck
k4ia
On 5/11/2012 3:11 PM, dm...@nexicom.net wrote:
I agree that this is risky but Id like to point out thatit will be
used by a core group. who are pretty dedicated and they are all
to pignology.net
I have no connection with the company - just interested in the
possibilities and marveling at the creativity.
--
Buck
k4ia
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Yes but. . .
The Mic pinout used by Elecraft is the Kenwood pinout. So, you would
use a Kenwood adapter with a Heil product. Hence the issue with the
blocking cap - unless Heil has now made available a mic adapter cable
specifically for the Elecraft line.
Buck
k4ia
On 2/24/2012 2:53 PM
http://hamradiomap.qth.com/
You'll have to add the Elecraft logo yourself
Buck
k4ia
On 2/21/2012 3:18 AM, István Szabó wrote:
Let's have it a price! I would buy one.
István Szabó
On 2/21/2012 4:46 AM, Gary K9GS wrote:
An excellent idea!
I can picture a problem though. It's already
Don't tease us like that. ;-) What is the bypass surgery method? I
don't remember seeing it.
Buck
k4ia
On 2/14/2012 2:41 PM, Ralph Parker wrote:
I had this problem after #1823 came back from PJ6A. Luckily, it didn't
happen while we were there, although another K3 did show this error. Tnx
hum.
Buck
k4ia
On 1/23/2012 11:28 AM, Phil Hystad wrote:
Cary,
I battled a hum/buzz problem just two weeks ago. After almost a full day
spent hunting, experimenting, searching, and doing everything under the sun
plus some very helpful dialog from others here on Elecraft forum, the
hum
on
the MFJ. As an added bonus, my amplifier now puts out full power as it
was being under driven before.
--
Buck
k4ia
K3 # 101
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Is it possible that in setting the power level, you accidentally turned
up the compression? (they are on the same knob). If the compression is
too high it will make a rushing, buzzing sound on the audio
Buck
k4ia
On 1/13/2012 2:09 PM, Phil Hystad wrote:
Ron,
OK, now it appears I
How about a Mouser part # for those knobs?
Buck
k4ia
K3 # 101
On 1/8/2012 2:17 PM, David Gilbert wrote:
I certainly agree with your overall sentiment. It beats me why
Elecraft would continue to use a parts vendor that produces knobs with
such horrible quality control. Three years
the transmitter calibration routine in the K3 Utility
program. SWR in all three cases is nominal 1:1
The result is the same to a real antenna although the SWR is not 1:1
What could be causing the external-sensor type wattmeters to read low?
Buck
k4ia
K3 # 101
On 1/2/2012 10:14 PM, Ron D'Eau
I have found in SP that I like the pitch to start high and come down as I tune
closer. It makes it easier to hear the signal coming. Thus, the need to be
on a different side depending on if I am tuning up or down.
Craig Buck
On Dec 11, 2011, at 2:08 PM, Jim McCook w...@cox.net wrote:
On
In the main Config Menu Mic Sel, I plug the mic into the front panel
and use FP-H and no bias. Mic gain 18-20. Unless you have an Icom
cartridge in the Pro-Set. That would require bias.
Buck
k4ia
K3 # 101
On 11/26/2011 4:35 PM, Jack Berry wrote:
I have a Pro-Set mic that came
Having done this several times myself, my advice would be to do it all
at once. There is a certain amount of overhead removing screws,
breaking into the radio and moving stuff around to get to the parts. It
is pain to do that multiple times. Just get it over with.
Buck
k4ia
K3 # 101
On 11
at its best for only $475 plus $10
shipping in US. Includes walwart power supply and BNC to SO239 adapter.
Please reply off list. Thanks for looking.
--
Buck
k4ia
K3 # 101
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Whoever had the W2 for sale, please contact me. Thunderbird ate your
email and I am interested in buying it from you.
-- Buck k4ia
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Interesting but I could sure use some more detailed instructions how to
set it up
Buck
k4ia
K3 # 101
On 10/3/2011 7:31 PM, Michael Downs wrote:
I have two apps in the Apple App Store that allow you to remotely control
your K3 using your iPhone, iPad, or iPod Touch. These apps are free as I
connectors to see if they apply to your rig's serial
number. Do both to solve your problem.
Buck
k4ia
K3 # 101
On 9/23/2011 6:39 AM, DK5EW wrote:
Hi all,
I use at my K3 a HEIL PRO SET ELITE IC, I had this as I use it at my
old ICOM IC-275H as well.
Now I recognised that I have a small noise
Try reducing your compression setting. I get a noise at 25 also.
Buck
k4ia
K3 # 101
On 9/23/2011 7:33 AM, DK5EW wrote:
Dear Buck,
thanks for your tips but I'm not sure if I have to do any mor because my
K3 is brand new !
It came 05.September 2011 and has serial 5776.
73's Erwin/DK5EW
Am
to do that trick but it can be done.
If you use the K3DVK, you have to take your hands off the keyboard to
punch a button on the front panel of the radio and your number of
available messages is much more limited.
And, the N1MM voice keyer is free.
Buck
k4ia
K3 # 101
On 9/3/2011 9:46 PM
I notice high swr when my AL572 is in the antenna circuit - even when turned
off. When I hook the coax directly to the K3, the swr is 1:1. Haven't figured
out why except maybe there is a low pass filter built in the amp that is in
line all the time.
Craig Buck
On Jul 17, 2011, at 11:07 AM,
.
If it is a data clash, one solution could be to hook up the PTT line and
use hardware PTT. What do you think?
Buck
k4ia
On 6/27/2011 6:56 PM, Joe Subich, W4TV wrote:
The setup was a K3, N1MM and a MicroHam MicroKeyer (the CW only
model).
Do you mean the microHAM CW Keyer or some other
That confuses me - how does the Winkey chip send PTT based on data in
the buffer? Is there a setting I am missing?
Buck
k4ia
On 6/28/2011 10:56 AM, Steve London wrote:
On 06/28/2011 08:37 AM, Joe Subich, W4TV wrote:
I'm concerned because you indicated that the CW Keyer PTT LED was
lit
on again.
That would release the PTT and all would go back to normal. It didn't
happen every time but it did happen a lot.
Anyone with any ideas, chime in.
--
Buck
k4ia
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Go back and be double plus certain you put the filter in the right slot
and that you have enabled it in the menu.
Buck
k4ia
K3 # 101
On 6/12/2011 9:34 AM, Iain Haywood wrote:
Well,
My K3 arrived promptly, constructed it in 6 hrs last night, easy peasy..
However I was last active two
Wayne mentioned the possibility of a low power 2 meter module in the KX3.
Stay tuned - there is lots more to come.
Buck
k4ia
On 5/22/2011 6:54 AM, Julian, G4ILO wrote:
Oliver Dröse wrote:
It isn't! At least 2 m is missing. :-((
Yes, I have to agree. Is it too late for provision
Riding the RF gain just changes the floor. An S7 signal will still read
S7. No?
Buck
k4ia
K3 # 101
On 5/17/2011 7:56 PM, VK7JB wrote:
Helpful comments, Jim.
I ride the RF gain control on the K3 to very good effect. The only problem,
as you point out, is that the S-meter won't read signal
RFI with it but I only operate 40M. I
understand Samlex supplies are quiet but, as others have pointed out,
there is bound to be noise somewhere.
Buck
k4ia
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
. That is the way I would do PSK split.
Buck
k4ia
On 5/11/2011 5:49 PM, w...@w5ov.com wrote:
At the risk of beating the same old expired equine, this is because the
radio's SPLIT function is disabled unless you already have the other VFO
and mode set in a way that allows you to go SPLIT. This is a bad
these mods. Info is
available on the Elecraft website under Alerts, Enhancements and
Application Notes. There are two mods - one to the microphone jack and
one to the real panel.
After doing the above, I have had no more problems with RFI.
Buck
k4ia
On 4/12/2011 2:07 PM, Edward R. Cole wrote
There are also two pin 1 mods that solved my problems. Search the
Alerts Enhancements page on the Elecraft website.
Buck
k4ia
On 3/18/2011 6:18 PM, Jim Brown wrote:
On 3/18/2011 2:51 PM, Elecraft K3 wrote:
I am experiencing a confounding problem with Ham Radio Deluxe, Digital
Master 780
is
gone and the mic gain and compression settings are working normally. Night
and day difference.
I offer this as advice to anyone who experiences issues with noise in the
audio or difficulty adjusting the mic gain and compression.
Buck
k4ia
K3 #101
complicated. It has
taken me three years to figure this little bit out.
Comments? Do I understand it right?
Buck
k4ia
K3 #101
In a message dated 12/9/2010 10:11:19 A.M. Eastern Standard Time,
barry.n...@gmail.com writes:
Thanks Don. I just realized that I can do some quick experiments
1 - 100 of 205 matches
Mail list logo
