Re: [Elecraft] Ham radio as a side dish

2018-05-27 Thread Bill Frantz
dary between communications media and the things you most enjoy talking about? ----- Bill Frantz| The first thing you need when | Periwinkle (408)356-8506 | using a perimeter defense is a | 16345 Englewood Ave www.pwpconsult.com

Re: [Elecraft] Boldly OT: 6 meter Sporadic-E season and the FT-8 microjuggernaut

2018-06-01 Thread Bill Frantz
. But I’d like to figure out how those of us who enjoy the occasional gear-grinding manual-transmission contact can find each other on this brave new highway. Ideas? Wayne N6KR - Bill Frantz| Airline peanut bag

Re: [Elecraft] Any advice, please?

2018-07-01 Thread Bill Frantz
r cleaner mic bias and for TX EQ and compression setup. --- Bill Frantz| There's nothing so clear as | Periwinkle (408)356-8506 | a design you haven't written | 16345 Englewood Ave www.pwpconsult.com | down.- De

Re: [Elecraft] [K3] factory upgrade to K3(s)

2018-06-27 Thread Bill Frantz
. --- Bill Frantz| Re: Computer reliability, performance, and security: 408-356-8506 | The guy who *is* wearing a parachute is *not* the www.pwpconsult.com | first to reach the ground. - Terence Kelly

Re: [Elecraft] Field Day Report

2018-06-25 Thread Bill Frantz
--- Bill Frantz| Re: Computer reliability, performance, and security: 408-356-8506 | The guy who *is* wearing a parachute is *not* the www.pwpconsult.com | first to reach the ground. - Terence Kelly

Re: [Elecraft] Seems That 6 Meters is Some What Open

2018-06-20 Thread Bill Frantz
was from VE2XK, so go figure. I always have a blast working DX on 6M. Maybe I should get an antenna. :-) 73 Bill AE6JV -- Bill Frantz| There are now so many exceptions to the 408-356-8506 | Fourth Amendment

Re: [Elecraft] Filters

2018-06-30 Thread Bill Frantz
not do code. Is there any recommended settings for the shift lo cut and width? It has the KFL3A-400 and the KFL3A-12.8 8 pole filters installed I have read the manual and it does not really help me. Thanks Bill W3WGG --- Bill

Re: [Elecraft] Filters

2018-06-30 Thread Bill Frantz
increments not 0.05 increments is there some CONFIG item I need to change? I looked through the CONFIG menus and Fred Cady’s book however I did not see anything about setting that step. 73, Michael KK6RWK On Jun 30, 2018, at 5:37 PM, Bill Frantz wrote: Congratulations. The K3

Re: [Elecraft] Any advice, please?

2018-07-01 Thread Bill Frantz
the box soon. Before I do, I thought I’d ask you guys if you have any advice for a newbiebefore I open the box, Joe-can’t-wait, MW1MWD - Bill Frantz| When it comes to the world | Periwinkle (408)356-8506

[Elecraft] PX3 computer interface to KX3

2018-04-26 Thread Bill Frantz
'm low on test equipment here, but I do have a DVM.) Thanks - Bill AE6JV --- Bill Frantz| Concurrency is hard. 12 out | Periwinkle (408)356-8506 | 10 programmers get it wrong. | 16345 Englewood Ave www.pwpconsu

Re: [Elecraft] KPA500/K3 AUX bus specification

2018-04-30 Thread Bill Frantz
, it seems unreasonable to NOT put it in the manual ... --- Bill Frantz| Since the IBM Selectric, keyboards have gotten 408-356-8506 | steadily worse. Now we have touchscreen keyboards. www.pwpconsult.com | Can we

Re: [Elecraft] FT8 and KX3

2017-10-22 Thread Bill Frantz
el. Scroll down to the bottom of the left column and click on the link. 73, Don W3FPR On 10/20/2017 4:54 PM, Bob Cutter wrote: New to FT8 and KX3 operation. I cannot seem to get them communicating. Error message hamlib failure. ---

Re: [Elecraft] FT8: "Magic radio"?

2018-07-03 Thread Bill Frantz
and had to forgo RTTY contacts. Do what you enjoy. Ham radio is a very big tent. 73 Bill AE6JV --- Bill Frantz| Re: Computer reliability, performance, and security: 408-356-8506 | The guy who *is* wearing

Re: [Elecraft] FT8: "Magic radio"?

2018-07-03 Thread Bill Frantz
Bill AE6JV On 7/3/18 at 2:17 PM, j...@audiosystemsgroup.com (Jim Brown) wrote: And I suspect FT8 has much better immunityto noise and QRM. -- Bill Frantz| There are now so many exceptions to the 408-356-8506 | Fourth

Re: [Elecraft] Very off topic, but trying to get info...

2018-01-07 Thread Bill Frantz
... --- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and | 16345 Englewood Ave www.pwpconsult.com | vegetables without stickers. | Los Gatos, CA 95032

Re: [Elecraft] Elecraft KIO3B and WSJT-X

2018-01-07 Thread Bill Frantz
. Bill Frantz|"Insofar as the propositions of mathematics refer to 408-356-8506 | reality, they are not certain; and insofar they are www.pwpconsult.com | certain, they do not refer to reality.” -- Ein

Re: [Elecraft] PTT switch for K3

2018-01-08 Thread Bill Frantz
alk for a long time, this option might be attractive and a substitute for a dead pedal. 73 Bill AE6JV --- Bill Frantz| Concurrency is hard. 12 out | Periwinkle (408)356-8506 | 10 programmers get it wrong. |

Re: [Elecraft] Long wire antennas

2018-01-10 Thread Bill Frantz
...@starpower.net wrote: When you raise a long wire antenna more than about 0.05 wavelengths above the ground, horizontal polarized radiation becomes dominant and the radiation pattern always has a deep null off the ends. --- Bill Frantz

Re: [Elecraft] [P3] Another symmetry question

2018-01-08 Thread Bill Frantz
window will go to that frequency on the radio but will put the span edges at odd 20 KHz boundaries [3510-3530, 3530-3550] and sometimes at 3515-3535. -- Bill Frantz| There are now so many exceptions to the 408-356-8506

Re: [Elecraft] K3 Power Drop During Operation

2018-01-25 Thread Bill Frantz
> KPA3 > PA nor'. recommended setting for hard contest use? 73, Jeff PJ2ND / K8ND --- Bill Frantz|Security, like correctness, is| Periwinkle (408)356-8506 |not an add-on feature. - Attr-| 16345 Englewo

Re: [Elecraft] Who would spend 30 hours+ building an Elecraft K2? (plus: special pricing)

2018-01-26 Thread Bill Frantz
I have always thought that real hams build their own equipment and uber hams design and build their own equipment. I guess that makes Wayne a uber ham. 73 Bill AE6JV --- Bill Frantz| If the site is supported

Re: [Elecraft] KPA1500 ATU - ability to handle more than two antennas

2018-01-27 Thread Bill Frantz
.) --- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | internet. I have DSL.| 16345 Englewood Ave www.pwpconsult.com | | Los Gatos, CA 95032 __ Elecraft mailing

Re: [Elecraft] wsjtx-x drops receive signal and stops txing, randomly

2018-02-07 Thread Bill Frantz
computing devices. It's sadly all too common an issue, and no one yet I think has found the definitive answer as to why it happens, or how! --- Bill Frantz| "I wish there was a knob on the TV to turn up t

Re: [Elecraft] Old Posts

2018-02-07 Thread Bill Frantz
ing tons of old messages, so it is not > Ele-specific. Another that > I am familiar with is QRP-L. > > 73, Ron AC7AC ------- Bill Frantz| There's nothing so clear as | Periwinkle (408)356-8506 | a design you

Re: [Elecraft] UHF connectors [was: Array Solutions Lightning Arrestor]

2018-02-11 Thread Bill Frantz
an analysis to determine your system efficiency. I recently did so and discovered that I have a worst-case loss (to the feedpoint up at the antenna) of 1 dB, which is 21% of my power. Gone. Forever. Whoosh! --- Bill Frantz

Re: [Elecraft] QUICK QUESTION

2018-02-07 Thread Bill Frantz
as to which band was installed. 73 Bill AE6JV On 2/6/18 at 12:58 PM, wmgo...@gmail.com (Michael Goins) wrote: Is their an easy way to tell if a KX3 has the 2 meter module in it without opening it up? Mike, k6wmg --- Bill

Re: [Elecraft] MICROHAM USB III INTERFACE WITH K3 UTILITY DOES NOT WORK

2018-02-16 Thread Bill Frantz
A first step might be to get things working using the K3 utility under MacOS. After that works, then fight whatever problems may exist in VMware and Windows. 73 Bill AE6JV --- Bill Frantz| "The only thing we

Re: [Elecraft] Fwd: K3 And WSJT-X FT8 Timing

2018-02-23 Thread Bill Frantz
ting via USB. --- Bill Frantz| If you want total security, go to prison. There you're 408-356-8506 | fed, clothed, given medical care and so on. The only www.pwpconsult.com | thing lacking is freedom. - Dwight D

Re: [Elecraft] K3S and Winkeyer

2018-02-22 Thread Bill Frantz
interested. 73, Brian, K0DTJ On Feb 21, 2018, at 17:52, Bill DeVore <maxr...@gmail.com> wrote: I’d like to start contesting and plan on using N1MM with my K3S. Is there any advantage on adding a Winkeyer to the mix? -----

Re: [Elecraft] OT Power Strip suggestion.

2018-02-21 Thread Bill Frantz
bout 200 KHz at 75 watts fried the tweeters. My failing memory tells me that the filter inductor also fried open, and I rewound it, amazing tech support at Advent. 73 Bill AE6JV ----- Bill Frantz| Govern

[Elecraft] Frequency Memory Editor Software

2018-02-21 Thread Bill Frantz
Is there any possibility of getting a Mac/Linux version of the Frequency Memory Editor Software? It looks like a nice tool. 73 Bill AE6JV --- Bill Frantz|"Web security is like medicine - trying to do good for

Re: [Elecraft] Mac Clock Question

2018-02-20 Thread Bill Frantz
lock setting in my Mac mini (running Sierra, 10.12) good enough for modes like JT65 and FT8? 2. If not, what’s a good reliable time sync app I can download and use? ------- Bill Frantz|"Web security is like me

Re: [Elecraft] Noise cancelling headphones

2018-08-03 Thread Bill Frantz
useful for quieting airplanes, but since I once fell asleep at a Jefferson Airplane concert, I really don't have a problem putting up with noisy environments. 73 Bill AE6JV --- Bill Frantz| If the site is supported

Re: [Elecraft] KPA-1500 Efficiency As A Function of Input Power

2018-08-17 Thread Bill Frantz
For those curious about the reasons for high power draw at low power out, it might be useful to review the handbook discussion of amplifiers, and the characteristics of class A, B, and C designs. 73 Bill AE6JV -- Bill Frantz

Re: [Elecraft] K3 TX Calib Dummy Load Recommendations

2018-08-26 Thread Bill Frantz
outside is then covered with a piece of coax braid. It does well on the antenna analyser test Bob, K4TAX suggests. It lives in a pocket of Rose's case and goes where the radio goes. 73 Bill AE6JV --- Bill Frantz

Re: [Elecraft] Filter Recommendations

2018-08-26 Thread Bill Frantz
will pass audio up to 2.45 KHz, which makes SSB voice quite intelligible. 73 Bill AE6JV On 8/26/18 at 5:45 AM, elecraft@mailman.qth.net (Lee Murrah via Elecraft) wrote: What does the 2.1 KHz filter do for you? - Bill Frantz

Re: [Elecraft] KPA-1500 Efficiency As A Function of Input Power

2018-08-17 Thread Bill Frantz
used four 4-1000A's in parallel and the filament power was 600 watts. Efficiency, including filament power was just over 70%. --- Bill Frantz| Ham radio contesting is a| Periwinkle (408)356-8506 | contact sport

Re: [Elecraft] [KX3] RS232 xcvr control when serial ports are occupied

2018-07-15 Thread Bill Frantz
as something else is. --- Bill Frantz| Can't fix stupid, but duct | Periwinkle (408)356-8506 | tape can muffle the sound... | 16345 Englewood Ave www.pwpconsult.com | - Bill Liebman | Los Gatos, CA

Re: [Elecraft] new owner looking for fuses.

2018-07-15 Thread Bill Frantz
) wrote: Hence the reason for 3AC fuses. They have a ceramic body and don't explode. Of course the only way to tell if they are open is to measure them. --- Bill Frantz| If the site is supported by | Periwinkle (408

Re: [Elecraft] new owner looking for fuses.

2018-07-15 Thread Bill Frantz
the only way to tell if they are open is to measure them. Bob, K4TAX It was a long time ago, but I think we blew up some of those, too. --- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506

Re: [Elecraft] Elecraft SSB Net Question

2018-07-15 Thread Bill Frantz
es I won’t be able to check into the net, but most of the fun with QRP is when the unexpected happens. Just thought I’d ask rather than cause unneeded QRM. tnx de George WD0AKZ dit – dit -- Bill Frantz| There are now so many

Re: [Elecraft] SVGA for P3 - only looking for ten (10) replies (is that possible?)

2018-07-23 Thread Bill Frantz
K9YC --- Bill Frantz| Re: Computer reliability, performance, and security: 408-356-8506 | The guy who *is* wearing a parachute is *not* the www.pwpconsult.com | first to reach the ground. - Terence K

Re: [Elecraft] OT - The HeyPhone

2018-07-13 Thread Bill Frantz
pal/speleonics> Some of the European radios have had problems in the US because they are sensitive to the harmonics of our 60 Hz power. 73 Bill AE6JV --- Bill Frantz| When an old person dies, a | Periwinkle (408)35

[Elecraft] Why Black

2018-08-31 Thread Bill Frantz
black. It would seem that black letters on a light background would be more visible under low light conditions. It would also liven up the shack. 73 Bill AE6JV --- Bill Frantz| Concurrency is hard. 12 out | Periwinkle

Re: [Elecraft] K3S fsk with usb

2018-08-31 Thread Bill Frantz
raditional methods but that wouldn't work using this unsupported method. --- Bill Frantz| When an old person dies, a | Periwinkle (408)356-8506 | library burns. - Joe McGawon | 16345 Englewood Ave www.pwpconsult.c

Re: [Elecraft] searching for post by Wayne n6kr about counterpoise

2018-09-09 Thread Bill Frantz
rockbound 10 m TX, and indeed, I seemed to be able to work everything I heard if I had a 40 m rock close enough.  Window screens are no longer copper so I don't think it would work today. --- Bill Frantz| Securi

Re: [Elecraft] Low Voltage Band Data Output

2018-07-04 Thread Bill Frantz
Will WC2L --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewood Ave www.pwpconsult.com | want to pay for them.| Los Gatos,

Re: [Elecraft] K-Line Climate Control

2018-07-05 Thread Bill Frantz
the changes. 73 Bill AE6JV --- Bill Frantz|"We used to quip that "password" is the most common 408-356-8506 | password. Now it's 'password1.' Who said users haven't www.pwpconsult.com | learned

Re: [Elecraft] [KX3] RS232 xcvr control when serial ports are occupied

2018-07-09 Thread Bill Frantz
aming them "transmit" and "receive."  "DTE2DCE" and vice versa might have been a better choice so many years ago.  "Data Terminal" and "Data Communications" were probably equally poor naming choices, but it seemed so obvious then.

[Elecraft] [OT] Legal Data Bandwidths

2018-07-06 Thread Bill Frantz
o. However, that kind of regulation would solve this problem. 73 Bill AE6JV On 7/6/18 at 2:10 PM, k6...@foothill.net (Fred Jensen) wrote: A data transmission could occupy any BW so long as its symbol rate remains at or below 300. --

Re: [Elecraft] K3S Delta Freq LED and Split Mode in WSJT-X

2018-07-11 Thread Bill Frantz
Freq (triangle f) LED is illuminated and sometimes not. I'll admit I'm not sure what that's about and would appreciate some clarity. Thanks! Bret/N4SRN --- Bill Frantz| Since the IBM Selectric, keyboards have gotten 408-356

Re: [Elecraft] [KX3] RS232 xcvr control when serial ports are occupied

2018-07-09 Thread Bill Frantz
l 103 could send data only in one direction at a time so RTS and CTS were included to control the flow of the data. --- Bill Frantz| Re: Computer reliability, performance, and security: 408-356-8506 | The guy

[Elecraft] The case of the deaf P3

2018-01-19 Thread Bill Frantz
off and on, the loss was much greater, like 15dB or so. I must of pushed the switch when I was adding the lug. 73 Bill AE6JV --- Bill Frantz| When an old person dies, a | Periwinkle (408)356-8506 | library burns

Re: [Elecraft] HF Voyager

2018-03-06 Thread Bill Frantz
how it worked for me anyway). ,,, >> Rusty, W6OAT -------- Bill Frantz|"Insofar as the propositions of mathematics refer to 408-356-8506 | reality, they are not certain; and insofar they are www.pwpconsult.com

Re: [Elecraft] New Sub RX

2018-03-12 Thread Bill Frantz
on. VE7XF --- Bill Frantz| Since the IBM Selectric, keyboards have gotten 408-356-8506 | steadily worse. Now we have touchscreen keyboards. www.pwpconsult.com | Can we make something

Re: [Elecraft] New Sub RX

2018-03-13 Thread Bill Frantz
spend MINUTES by using CW Skimmer. This comes from an OT who has 385 confirmed overall since 1957. 73, Bill W4ZV --- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and |

Re: [Elecraft] Planning the next filters

2018-03-08 Thread Bill Frantz
htm> particularly the last graph. - Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant and a fearful master.

Re: [Elecraft] Planning the next filters

2018-03-09 Thread Bill Frantz
/2018 10:18 PM, Bill Frantz wrote: This problem occurred with a SignaLink. That's not a very good interface. It helps to have an clip light or other digital level indicator on the interface for the received signal. My Tascam US100 has a green signal presence light and a red one for clip, which

Re: [Elecraft] Planning the next filters

2018-03-08 Thread Bill Frantz
from 4K to 2.5K (which automatically switched from the 13 KHz FM filter to the stock 2.7 KHz filter). 73 Bill AE6JV On 3/8/18 at 8:38 PM, j...@audiosystemsgroup.com (Jim Brown) wrote: On 3/8/2018 1:08 PM, Bill Frantz wrote: I got the 250 for eliminating loud PSK signals from wiping out weak

Re: [Elecraft] New Sub RX

2018-03-10 Thread Bill Frantz
one loop. Amazing how the band condx can change. > Nice to have the > reception be instantaneous with my stereo speakers. ------- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506 | ove

Re: [Elecraft] New Sub RX

2018-03-14 Thread Bill Frantz
u happen to be lucky (and strong) they hear you. Otherwise, you can spend hours of wasted time.  A couple of west African DXpeditions currently operating leap to mind. --- Bill Frantz| Truth and love must prevail | Peri

Re: [Elecraft] K3 audio line in/out cables

2018-04-05 Thread Bill Frantz
and allowing it to get into the computer.    Of course a couple of turns through a ferrite donut on the cable will also help. 73 Bob, K4TAX --- Bill Frantz| Ham radio contesting is a| Periwinkle (408)356-8506 | contact

Re: [Elecraft] PSU cable

2018-04-11 Thread Bill Frantz
lite forum. --- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506 | over lies and hate. | 16345 Englewood Ave www.pwpconsult.com | - Vaclav Havel | Los Gatos,

Re: [Elecraft] Art of Electronics

2018-04-08 Thread Bill Frantz
. --- Bill Frantz| Re IOT: "How many access control systems does it take www.pwpconsult.com | to change a light bulb?" - Dean Tribble __ Elecraft mailing list Home: http://mailm

Re: [Elecraft] Art of Electronics

2018-04-08 Thread Bill Frantz
red > at higher frequencies. That's not "art," it's not "black magic," its pure > science. ------- Bill Frantz| "I wish there was a knob on the TV to turn up the 408-356-8506 | i

Re: [Elecraft] 32 bit Elecraft Utility Apps

2018-04-14 Thread Bill Frantz
73 Bill AE6JV --- Bill Frantz| Ham radio contesting is a| Periwinkle (408)356-8506 | contact sport. | 16345 Englewood Ave www.pwpconsult.com | - Ken Widelitz K6LA / VY2TT | Los

Re: [Elecraft] KPA1500 Delivery Data Point

2018-04-22 Thread Bill Frantz
People at the Elecraft booth at the Visalia IDXC were quoting July deliveries for KPA1500s ordered now. Perhaps the end of the wait is in sight. 73 Bill AE6JV --- Bill Frantz| Ham radio contesting is a| Periwinkle

Re: [Elecraft] 32 bit Elecraft Utility Apps

2018-04-16 Thread Bill Frantz
need to run various digimodes all on the same PC, with multiple screens and I/O systems.   But I know of other people already doing all that on 32 bit Linux systems just fine anyway.  (Once they find out how to make it all work and play nice.)

Re: [Elecraft] [KX3] New Product: SPX3 External Speaker

2018-04-16 Thread Bill Frantz
. --- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | internet. I have DSL.| 16345 Englewood Ave www.pwpconsult.com | | Los Gatos, CA 95032

Re: [Elecraft] Longer K-Pod cable?

2018-04-19 Thread Bill Frantz
--- Bill Frantz| Ham radio contesting is a| Periwinkle (408)356-8506 | contact sport. | 16345 Englewood Ave www.pwpconsult.com | - Ken Widelitz K6LA / VY2TT | Los Gatos, CA 95032 __ Elecraft

Re: [Elecraft] Who's On First?

2018-03-31 Thread Bill Frantz
instance). Look at the firmware release notes for the past 3 months. BTW, the firmware release notes should be considered an addition to your K3/K3S manual. Do not overlook them. 73, Don W3FPR On 3/29/2018 6:58 PM, Bill Frantz wrote: On my Mac system, it doesn't seem to matter whether the radio

Re: [Elecraft] Proper grounding for P3.

2018-03-29 Thread Bill Frantz
. :) Bill Frantz|"Insofar as the propositions of mathematics refer to 408-356-8506 | reality, they are not certain; and insofar they are www.pwpconsult.com | certain, they do not refer to reality.” -- Ein

Re: [Elecraft] Who's On First?

2018-03-29 Thread Bill Frantz
s? Cheers. Richard -- W4KBX --- Bill Frantz|"After all, if the conventional wisdom was working, the 408-356-8506 | rate of systems being compromised would be going down, www.pwpconsult.com | wouldn't it?&q

Re: [Elecraft] No Audio

2018-03-26 Thread Bill Frantz
.@pwpconsult.com --- Bill Frantz| Re: Computer reliability, performance, and security: 408-356-8506 | The guy who *is* wearing a parachute is *not* the www.pwpconsult.com | first to reach the ground.

Re: [Elecraft] FT 8

2018-03-03 Thread Bill Frantz
Ham radio is a wonderful hobby, and there are many ways to enjoy it. 73 Bill AE6JV --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewood Ave www.pwpconsult.

Re: [Elecraft] [K3] A momentary BAT LOW warning

2018-03-04 Thread Bill Frantz
supply, causing excess drop. Reattached and now the drop is just a few tenths of a volt. Problem solved. --- Bill Frantz| Concurrency is hard. 12 out | Periwinkle (408)356-8506 | 10 programmers get it wrong. | 16345

Re: [Elecraft] KPA1500 and FT8

2018-03-04 Thread Bill Frantz
want at that time to review advice given in this thread by you and others. - Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant

Re: [Elecraft] Confessions of grounding

2018-10-12 Thread Bill Frantz
er the end and a screw hole drilled through-- basically, homemade flat terminal lugs on the ends of the braid. Very easy to manage now. ------- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506 |is

Re: [Elecraft] NEW Elecraft Webpage now up

2018-10-18 Thread Bill Frantz
@gmail.com (Ian Kahn) wrote: I particularly like the photo, in the home page banner, of the father helping his then-Cub Scout (now Boy Scout) son making Jamboree on the Air contacts. :-) --- Bill Frantz| I don't have high-speed

Re: [Elecraft] Elecraft CW Net Announcement

2018-10-21 Thread Bill Frantz
) wrote: The time changes on Nov 4th. Seems later than last Fall... Bill Frantz|"Insofar as the propositions of mathematics refer to 408-356-8506 | reality, they are not certain; and in

Re: [Elecraft] K3 vs. KX3 with wsjt-x

2018-10-21 Thread Bill Frantz
ll? 73 Robert K7RNA On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote: I have the same behavior: KX3 PX3 SignaLink MacBook Pro CAT interface On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote: I have noticed an significant difference between the way my K3 and KX3 work with wsjt-x. On the K3,

Re: [Elecraft] P3: Span limits move when changing bands

2018-10-26 Thread Bill Frantz
, only when the commands start at the computer and go thru the P3 to the K3.  N1MM+ is the only control software I use. --- Bill Frantz| There's nothing so clear as | Periwinkle (408)356-8506 | a design you haven't

Re: [Elecraft] P3: Span limits move when changing bands

2018-10-26 Thread Bill Frantz
software you’re running on your PC? Grant NQ5T K3 #2091 KX3 #8342 On Oct 26, 2018, at 7:46 PM, Bill Frantz wrote: I have the same problem with wsjt-x running from a Mac. When I change bands, the center frequency changes. Very annoying since it moves part of the display outside of the 17M

[Elecraft] K3 vs. KX3 with wsjt-x

2018-10-20 Thread Bill Frantz
s anyone else experienced this issue? 73 Bill AE6JV ----- Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant and a fearful ma

Re: [Elecraft] Re KX3 booster

2018-11-07 Thread Bill Frantz
suppression components. --- Bill Frantz| When an old person dies, a | Periwinkle (408)356-8506 | library burns. - Joe McGawon | 16345 Englewood Ave www.pwpconsult.com | Irish Ethnographer | Los Gatos, CA

Re: [Elecraft] Subject Re: Just a thought...

2018-11-15 Thread Bill Frantz
I guess. --- Bill Frantz| Re: Computer reliability, performance, and security: 408-356-8506 | The guy who *is* wearing a parachute is *not* the www.pwpconsult.com | first to reach the ground. - Terence Kelly

Re: [Elecraft] CODEC

2018-10-04 Thread Bill Frantz
McGraw K4TAX) wrote: Thank you Don.  Over and over again, I've said "what did you do last, before you broke it?"   Well then, go undo that. ------- Bill Frantz|Security, like correctness, is| Periwinkle (408)356-85

Re: [Elecraft] Data transmission on 30 meters with PX3 problem

2018-09-02 Thread Bill Frantz
d carry > substantial RF current. > 73, > Erik K7TV --- Bill Frantz| There's nothing so clear as | Periwinkle (408)356-8506 | a design you haven't written | 16345 Englewood Ave www.pwpcons

Re: [Elecraft] How to unsubscribe from reflector?

2018-12-29 Thread Bill Frantz
sh. 73 Bob, K4TAX --- Bill Frantz| "I wish there was a knob on the TV to turn up the 408-356-8506 | intelligence. There's a knob called "brightness", but www.pwpconsult.com | it doesn't work. -- Gallagher

Re: [Elecraft] Ideas for an FT8 Radio

2019-01-01 Thread Bill Frantz
: As for the concept of a dedicated FT8 radio, what's going to happen when FT9 becomes the latest craze?  How many people operate Olivia (or even JT-65) now? Bill Frantz|"Insofar as the propositions of mathematics refer t

Re: [Elecraft] Ideas for an FT8 Radio

2019-01-02 Thread Bill Frantz
as a "the new RTTY" and operate according to the accepted operating procedures of that mode.  I view this trend as very unfortunate. --- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | i

[Elecraft] {K3} Loss of audio while changing digital modes

2019-01-06 Thread Bill Frantz
on the K3, I lost all the audio out on both the headphones and the internal K3S upgrade "sound card". The bypass was to change modes with the mode switch and change back. Any ideas? 73 Bill AE6JV --- B

Re: [Elecraft] K3 DVR issue

2019-01-19 Thread Bill Frantz
On 1/19/19 at 5:36 PM, n...@widomaker.com (Nr4c) wrote: Is it possible that you have VOX turned ON or bumped a PTT or FOOTSWITCH? - Bill Frantz| Government is not reason, it is not eloquence, it is force

Re: [Elecraft] Battery Low K3

2019-01-14 Thread Bill Frantz
? :) --- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | internet. I have DSL.| 16345 Englewood Ave www.pwpconsult.com | | Los Gatos, CA 95032 __ Elecraft

Re: [Elecraft] New DSP Idea

2019-01-14 Thread Bill Frantz
arently a long way off. ------- Bill Frantz| Ham radio contesting is a| Periwinkle (408)356-8506 | contact sport. | 16345 Englewood Ave www.pwpconsult.com | - Ken Widelitz K6LA / VY2TT | Los Ga

Re: [Elecraft] Battery Low K3

2019-01-14 Thread Bill Frantz
you scarred me with leaking the cell inside of my K3...:) OK, OK, OK, I will check it tonite... --- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506 | over lies and hate. | 16345

Re: [Elecraft] PX3: Use outside in bright sunlight

2019-01-15 Thread Bill Frantz
e location (not in a darkened vehicle or your home). Typical LCD laptops screens are unusable in bright light so wonder about the PX3. Not interested in the P3 for my K3, just the PX3. --- Bill Frantz|Security, like c

Re: [Elecraft] Elecraft Net log for Jan, 20, 2019

2019-01-20 Thread Bill Frantz
Pro KI6DLDennis ID TS 4401ST TIME CHECK IN KE5SO Joe CO K3 1503 WA0BEU KeithCO KX37048 --- Bill Frantz| Security is like

Re: [Elecraft] Auto-spot, tuning aids, and the arcane history of CW pitch-matching

2019-01-22 Thread Bill Frantz
Bill AE6JV --- Bill Frantz| "I wish there was a knob on the TV to turn up the 408-356-8506 | intelligence. There's a knob called "brightness", but www.pwpconsult.com | it d

Re: [Elecraft] K2 100 Tuner question

2018-12-23 Thread Bill Frantz
used with the amp (majority had the KX3-2M). --- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | internet. I have DSL.| 16345 Englewood Ave www.pwpconsult.com

<    3   4   5   6   7   8   9   10   11   12   >