Sad part is that no one noticed the lack of power.
What's so sad about that? 8-)
The amp should only be used when absolutely needed...
73 es HNY,
Bruce, N1RX
__
Elecraft mailing list
Home:
Dave, I agree with your math, except...
Having a noise level of -27dBm delivered by the transmitter to the antenna
system, does not mean the antenna has 100% radiation efficiency, yes?
So -27dBm is 2 microwatts in transmitted noise to the antenna system, at
this particular spacing, in a 500Hz
I stand by my statement ... if everyone used FLEX SDR rigs (you do know
that noise power is additive, right?) we'd all have a major problem.
Dave AB7E
With that, I agree.
Bruce, N1RX
__
Elecraft mailing list
Home:
Agreed.
HNY,
Bruce, N1RX
_
From: Eric Swartz - WA6HHQ, Elecraft [mailto:e...@elecraft.com]
Sent: Tuesday, December 31, 2013 8:03 PM
To: Bruce Beford; elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 Full SDR
Let's let this thread rest for now in the interest of reducing
I would expect Eric and his wife Lerma to have a booth at the ARRL 100th
anniversary convention in Hartford, CT in July. They have been regulars at
the New England Division Convention (Boxboro, MA) every other year. That
event is being superseded by the ARRL 100th anniversary bash this coming
Fred,
The webpage for the MRP40-SDR software indicates it is looking for a radio
with IQ signal outputs. The KX3 has this. The K3 does not (natively).
However, a K3 equipped with an XV3(or XV3A), plus an LP-Pan, SoftRock, or
other IF to IQ baseband output would seem to be acceptable. (It is also
Fred, perhaps you misunderstood.
To properly use the SDR version of this program, you need to present it with
both I and Q signals (in-phase and quadrature). These would be routed into a
2-channel (stereo) soundcard. So, you need the I/Q output from the K3,
provided by LP-Pan, SoftRock, or
Bill, that's not the official archive. A more up-to-date listing can
generally be found on the mailman.qth list, which actually hosts the
reflector.
http://mailman.qth.net/pipermail/elecraft/
73,
Bruce N1RX
I was referring to the mail-list at:
Verify Roofing filter(s) configured for CW RX?
-Bruce N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Wrong antenna input selected?
-Bruce N1RX
K3 # 7462 works great on all bands except 17.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hmm, Can't think of any other user-selectable setting that could cause
this... Perhaps something amiss with the 15M/17M BPF, I suppose. Suggest you
contact Elecraft Support for further T/S ideas.
GL,
Bruce, N1RX
just double checked, correct ant
Wrong antenna input selected?
-Bruce N1RX
K3 #
I assume you are talking about the KX3 beta firmware. This discussion has
been about the K3 sidetone pitch. Production firmware level for the K3 is
4.67.
Bruce N1RX
I'm using 1.69 beta firmware that stops at 400 Hz.
__
Elecraft
As a good natured poke at our modern life. note the little wink at the
end...
Plenty of comments on this one. Let's end the thread gracefully.
Bruce, N1RX
Wow, I wonder how the poster is supposed to take this comment?
Mike R
__
Recently seen on an Elecraft e-list post:
Tiny iPhone 5 keypad, typos are inevitable
Incorrect. Typos are entirely evitable... It's a telephone. use a real
keyboard. ;-)
73,
Bruce N1RXX
__
Elecraft mailing list
Home:
I still feel transverter is appropriate (transceiver converter)
Bruce, N1RX
of course I meant upconverter not transverter...
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Yes, but it would -still- be a Flex-1500, not a K2 with panadapter...
Bruce, N1RX
To get back to the original question, I am not sure how many people would
want to add a P3 to a K2 ? For the price of the P3 (or even an LP-Pan) you
could pick up a new Flex-1500.
Bryan,
I don't believe you can determine the original serial number without the
original packing slip/invoice. Alternatively, Elecraft -may- be able to look
it up, if you have the original owner's name and/or call sign. If you -can-
determine the serial number, a replacement sticker can be
I'll assume you did not assemble your KX3. The screws that hold the display
bezel on thread into standoffs attached to the control board. IIRC, the 5
screws that hold the bezel (4 around the display, one below the VFO A knob)
are the only screws that hold the control panel in place. Use caution
Paul,
you will get more meaningful replies if you state what power level for TX.
Are you asking about a 10W K3, or 100W version?
73
Bruce
N1RX
I would appreciate knowing the experiences of folks who have run their K3
on battery power for several (4-8?) hrs., with perhaps a 20% TX duty
I know many users are happy with the 700 Hz roofing filter you guys have had
custom-made. However, I am wondering just how helpful it actually is,
compared to other, more standard roofing filter BWs. If a 700 Hz bandwidth
is ideal for scanning, just how is a roofing filter needed when scanning?
By
Peter,
I have heard from some afflicted with this, that the situation can be helped
in a few ways.
#1- reduce the overall system gain. Turn off unneeded preamps, turn on
attenuator.
#2. Often, the interfering signal has been identified as a SW BC station
_below_ the Amateur band in use. In
testing new internet and email account.
73,
Bruce
N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
As always, unless you direct them otherwise. For example, some DX buyers ask
for the full amount to be deducted immediately, if they expect the exchange
rate to move against them.
73,
Bruce
N1RX
Will Elecraft, as in the past, only charge the charge card
when the amp is ready to ship ?
73
Jim- a few thoughts on this.
1. You only stated you have power and IF into the P3. You did not mention
whether or not you have the RS232 cable connected between the K3 and the P3.
This is essential for getting the freq info from the K3.
2. In the P3 menu XCVR SEL: is it set to K3?
3. Make sure
One option for dealing with the different baud rate speeds of the P3 vs. the
KRC2 is a baud rate converter, such as seen here:
http://serialgadget.com/
One could also roll one's own, with the appropriate skills.
Also, if you are going to monitor the remote system via webcam, proper
antenna
Brian-
Your original post said you were working on the KRC2. Your last post stated
you had it configured as the KRC2ACC. The KRC2ACC uses different firmware,
and behaves differently than the basic KRC2. The KRC2ACC accessibility
upgrade and operation instructions indicate how the KRC2ACC firmware
I'm sensing a pattern...
Nov 16 2008, looking for a K3:
http://elecraft.365791.n2.nabble.com/WTB-K3-td1507873.html
Mar 3, 2009, looking for a K3/100:
http://elecraft.365791.n2.nabble.com/WTB-K3-100-td2412961.html
Mar 25, 2009, selling my K3/100-F (sold same day):
Is this more or less accurate, or have I missed something? Thanks.
You missed the fact that you really can't/shouldn't try to discharge the
full capacity of the battery. The life span of SLA batteries for instance,
are greatly reduced if you routinely go to greater than 50% depth of
discharge.
Sounds like it rescued -your- interest in the hobby, not the hobby itself.
Amateur Radio has been alive and well right along, thank you.
Have fun!
Bruce
N1RX
__
Elecraft mailing list
Home:
I don't believe Ten Tec has outsourced anything to China. They made an
agreement with YouKits to offer their products in this county under the Ten
Tec name. They did not design them nor request YouKits design them for Ten
Tec. They were available for quite a while before Ten Tec picked up the
Your answer lies here:
http://www.elecraft.com/K3/mods/dsp_rev_c_information.htm
Bruce
N1RX
From what point (date or serial number) was the K3DSP mod included?
__
Elecraft mailing list
Home:
This is exactly what I did. I used the output of my Trimble Thunderbolt,
through about 60 dB of attenuation, as the signal source for the temp
stability calibration. Worked great.
Bruce
N1RX
You can use the Gpsdo directly as a signal source. It should have a 5th
harmonic that will work well
I don't think the CS2100 fractional-n synthesizer used in the XG3 will allow
operation as low as you are asking. Perhaps Bob (the designer) will chime in
on this. OTOH, you could always build your own divider, and use the XG3 at a
freq that it can produce now. If you are designing transverters for
Umm... I don't know how else to put this but... Eric, -you- started the
rumor. Back on 18-Dec-2011, while we were waiting on our KX3s, you posted to
this list. For brevity's sake, I have not copied out the entire exchange
that was going on at the time. I know you have a lot of irons in the fire
Understood, Wayne. I recognized that full functionality would require
more than just the hardware. I (and others) would still like to see
this developed, as time and resources allow.
Thanks for your response.
Bruce
N1RX
On Tue, 21 May 2013 07:57:20 -0700, Wayne Burdick
Sounds like you have the waterfall set to monochrome in the Menu.
Tnx for all the responses. I may have poorly stated my question. What I
was trying to say is the waterfall traces seem dim both on P3 and on the
monitor I am using (dedicated to P3 SVGA). Even though signals seem
relatively
Evangelizing customers is a very important part of the Elecraft business and
advertising model.
It works. A small company like Elecraft relies upon (and needs) enthusiastic
customers to help spread the word. It's the best advertising money can't
buy.
Bruce
N1RX
I really like Elecraft's
Agreed. I enjoy helping out at the Elecraft booth at every New England ARRL
Convention. I always take time during the weekend to answer any questions I
can for prospective buyers. I try not to exaggerate or sugar-coat. I give my
opinions and relay my experience. I explain why Elecraft products
If you mean Ken Kesey, then no, I don't think that's the relevant reference.
Ken Kesey (and the gang of Merry Pranksters) used LSD laced Kool-Aid to
promote communal tripping.
The Jonestown example was far darker, a case of blindly following a
misguided trust to oblivion. It was after that
Agreed. Nor should they. -Bruce
From your etymology no one could ever state, I drank the Kool Aide.
Kevin.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
...they lose $10 each each sale, but make it up in volume! 8-)
I wonder how it is that they are still able to offer discounts. I guess
it's due to the volume of sales.
__
Elecraft mailing list
Home:
Ron,
I suggest you update your utility to the latest, 1.13.4.15 from the Elecraft
website here:
http://www.elecraft.com/K3/k3_software.htm
You are way behind on your Utility version.
73,
Bruce N1RX
I installed the KXV3A feature and attempted to run the 1 Milliwatt
Transmitter Gain Calibration
Correct. -Bruce, N1RX
Making sure I understand back to back...
One diode is wired in parallel with the other and the cathode
end of one is connected to the anode end of the other. This
connection will limit the passed voltage to +- the diode
insertion drop, about .6 volts.
Cheers -
They were posted on the Elecraft twitter site:
https://twitter.com/elecraft
I'm feeling particularly IQ-zero at the moment, because I've searched and
searched but can't find these doggone pictures of the KXPA100 amp that so
many posts have referred to. Will some kind soul please put me out of
The question was about the KAT100 tuner, not the KPA100 amp.
Bruce, N1RX
The KPA100 needs access to internal K2 signal lines for bandswitching,
T/R states, and other functions, so it is not usable with other rigs.
73,
Don W3FPR
On 4/23/2013 1:29 AM, Eddy wrote:
Can the KAT100 be
What happened to the PR10 (10M preamp)? Could one of these be
daisy-chained with a PR6 on the KXV3A, and be selected based on band on
the K3? (For those who already have the PR6).
Bruce, N1RX
__
Elecraft mailing list
Home:
Rich, AC7MA explained this quite well on the KX3 Yahoo group just last week:
The batteries and external supply are connected at the '+' end. The external
supply '-' is connected to KX3 ground, but not battery '-'.
With an external supply connected that's higher than the battery voltage,
the
Knut, you should have the KXV3 (or KXV3A option in your K3 to use the PR6.
The order page on the Elecraft website reads:
PR6 Low Noise 6m GaAs FET Preamp (0.5 dB typ) for the K3 and most other
rigs (Connects to the RX IN/OUT conn. on the KXV3.)
73,
Bruce, N1RX
Switch to SSB first, then go into the menu to change the MIC BTN parameter?
Bruce, N1RX
There appears to be a setting on the Configuration menu to turn off the
up/down and PTT but this is non functional. When selected on the menu by
VFOB the options on VFO A say n/a.
I also inquired about this mod on the list a couple months ago. No replies
or posting of the relevant info yet.
73,
Bruce N1RX
Last August, Wayne N6KR posted:
The mod I was talking about is newer (2010, I believe). It involves a
pair of very small-valued resistors in series with the AF output
Dave-
The THP amp uses a switching power supply, the KPA500 uses a linear supply.
There's the major difference in weight. You don't need the heavy transformer
in a switcher, but it's harder to make the power supply radio quiet
without detectable birdies in the ham bands.
73,
Bruce, N1RX
Hi Jorge,
Assuming you are asking about the K3, No there is no easy way without
modifying the unit, to make the ATT greater than the fixed amount. Why not
just reduce the RF gain?
-Bruce, N1RX
Hi
Is any way to increase ATT level? How many dB´s ATT is reducing?
Seems not enough this weekend!
Looking for the best out of the worst kind of antenna for my KX3 all band.
I think you just summed it up nicely yourself. These telescopic antennas
with loading coils at the bottom are all going to be many dB down from even
a modest wire antenna on a push up pole, like a Jackite kite pole.
configurations, of course. This one simply
works for me, with minimal hassle, and reliable results.
73,
Bruce, N1RX
-Original Message-
From: Fred Smith [mailto:m...@mo-net.com]
Sent: Monday, January 28, 2013 9:41 AM
To: 'Bruce Beford'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] Best Antenna
With a few messages from folks saying they had trouble loading the latest
beta firmware into the P3/P3SVGA, I just thought I'd add a data point. I had
absolutely no problems loading all of the files into my P3 and P3 SVGA. All
went perfectly, without any need for reboots (beyond what the utility
Fred, It -is- in the manual, on page 4, under POWER SUPPLY:
A power cable with a 2.1-mm plug is supplied. The
wire with the white stripe is positive. Trim the cable
to the desired length. Plug the cable into the 9-15
VDC jack, shown at left in the illustration below.
But, as Don says, when in
No, he actually did not hear wrong. He heard exactly what was said.
However, what was said was factually incorrect.
73,
Bruce, N1RX
Again, you have heard wrong.
__
Elecraft mailing list
Home:
OK, hint then...
Why not just plug the Proset into the back of the K3? Then you don't -need-
an adapter. If you want or need to use the front panel jack, the K3 is wired
the same as Kenwood rigs. Get a Pro set to Kenwood adapter.
GL,
Bruce, N1RX
Not yet. -Bruce, N1RX
Has the schematic of the KX3 been published? Have searched, but cannot
find.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Doug-
If you are referring to the KX3 driving the KPA500 (there are no dashes in
these product models) then- yes, many people do this. I get just almost
exactly 13 dB gain from the KPA500 when driven by the KX3.
73,
Bruce, N1RX
__
My K1 RF board ceramic trimmer capacitors C13 and C20 have an outline
shape that differs from either that described in the K1 assembly
instructions or on the silkscreen outline on the RF board PCB. This is
the same question that Dean asked back on 10/27/12. Don's answer
described trimmer
IMPORTANT ADDENDUM/CORRECTION TO MY PREVIOUS POST ON THIS.
I wrote:
Take your ohmmeter and measure from the center, where the adjustment tool
contacts the capacitor. Measure to each of the two contacts, and find the
one that is shorted to the adjustment slot. That is the side you want to
be
I don't get this. How is the rig runner implicated? The power doesn't go
thru it...DC or RF.
Of course it does- the Rig Runner is a DC power distribution panel.
-Bruce, N1RX
__
Elecraft mailing list
Home:
The K2 has internal jumpers for the mic jack configuration. This allowed for
the use of almost any microphone. I suggest you open yours to see how it is
wired. Refer to the manual for the layout of the configuration header.
73,
Bruce, N1RX
I seem to remember that the K2 mic jack is
configured
This sounds like the issue that has been occasionally seen where one of the
rotary encoder push buttons fails in the on state. Another possibility is
a failure of a button mux/demux circuit. In either case, a front panel board
swap-out may be the next step. Hopefully, you will hear back shortly
From the order page, under KX3 accessories:
XG50 Kit (Simple 49.380 MHz Signal Source)
The Elecraft XG50 is a simple 49.380 MHz signal source specifically designed
for use with the KX3 Extended VFO Temperature Compensation Procedure. See
App Note.
I used the 5th harmonic of my 10 MHz GPSDO for
It's the same thread as an SO-239 connector. There are caps available. See
eBay item # 150780563154 for an example.
73,
Bruce, N1RX
*
*
*If anyone knows of a supplier for a Cover that goes over the Mic Conn. on
the front of a K2 or K3, I would appreciate hearing from you. *
*
*
In the current firmware, the backlight will follow the state set in the
menu. If it's off, it's off during charge. If on, it's on during charge. I
kind of like it being on during charge. It reminds me the rig is actively
doing something. Perhaps a future version of firmware may provide a
The batteries are -already- fully charged, Stan. 10.8v after a charge cycle
on 8 NiMH cells is perfectly normal. The cells only have a rated voltage of
1.2v each. I believe the charge time won't start, because the batteries
don't need charging...
73,
Bruce, N1RX
Am I missing something? I can't
Hi, Drew.
No reply yet... on or off list.
73,
Bruce, N1RX
On Sun, 04 Nov 2012 08:43:21 -0500, drewko drew...@verizon.net wrote:
Hi Bruce,
Did you ever get a response to this question? I have noticed
questions about this but have never seen a response. I would also like
to know about this
Not true. A quick count for the month of November shows 154 posts with an
Elecraft product number or OT in the title. I counted around 20 without any
designation. The vast majority of posters are adhering to this request.
73,
Bruce N1RX
The sad truth is that the request is very seldom honored.
No, it does not mean that. I have interrupted mine several times with no ill
effects.
-Bruce, N1RX
So does this mean you can not interrupt the charge cycle without locking
thinks up?
Tex
__
Elecraft mailing list
Home:
A firm spring was shipped to you in error. Contact parts at electraft dot
com, and they will send you the medium spring. That's what I did. And yes,
the shipped light spring p/n does not match the app note)
73,
Bruce, N1RX
And, in light of your reply, how do I know which spring came with the
Probably doesn't matter much, since sections are only seen/used by those
who read the Nabble list on-line. Messages posted to Nabble are (eventually)
copied directly to the main Elecraft email list-serv without any category or
section. I believe the Elecraft pricipals involved- That is Wayne,
I also received my backordered KXBC3 today and installed it. I did not have
any problems, and the Power Off Pending Mode seems to work fine here. No
problem turning the unit back on/off again. Sorry, Stan. I can't duplicate
your problem here.
GL,
Bruce, N1RX
I installed my KXBC3 this morning
No. You can tune anywhere in the 60M band. It is up to you to be sure you
are transmitting on a valid channel. You can program these into memories
if you wish, but they are not hard-coded.
73,
Bruce, N1RX
Are the 60 meter frequencies hard coded into memory in the kx3?
It is a current balun. -Bruce, N1RX
Question: Is the BL-2 Balun a current or voltage Balun?
Bill, k6mgo
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
ANy chance we can see the application note on this (second) K3 audio output
mod added to the web page soon? I like keeping my K3 up to date, and I have
some other updates to apply.
Thanks,
Bruce, N1RX
K3 #559
Back in August, Wayne posted the following:
Iain,
The mod you referenced
Agreed. -Bruce, N1RX
More interesting will be to implement the send CW from SSB mode
(CW WGHT = SSB +CW) as described in the owner's manual.
73, Matt VK2ACL
__
Elecraft mailing list
Home:
Yes, it's normal, due to the direct conversion architecture of the KX3. Turn
on the KX3's RX isolation preamp to minimize this.
73,
Bruce, N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Only if you provide feedback on what you believe could be clarified. Ron,
AC7AC writes and maintains many of the manuals. He monitors this list, and
is always open to suggestions.
73,
Bruce, N1RX
Some of the instructions in the K2 manual are not precise to the point.
It could easily be
Wayne,
In response to a recent question about the K3's rx sensitivity on 10M, you
mentioned the PR10 preamp. New product? Or the result of sleep deprivation?
73,
Bruce, N1RX
__
Elecraft mailing list
Home:
Happy Birthday, Wayne. Enjoy. 8-)
-Original Message-
From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: Monday, October 01, 2012 6:40 PM
To: Bruce Beford
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 PR10 N6KR???
Apparently, even though we've shipped a couple
I would not assume most users prefer this. I have 2.8/1.8 and it suits me
just fine, thank you. The 1.8 works well under contest conditions, when
needed. Remember there is almost always a silent majority.
73,
Bruce, N1RX
Interesting that most here have gone with the 2.1 vs. the 1.8 KHz
Robert, Keep in mind that it IS a prosign. That is, it should be sent with
NO SPACING between the I and the M So, di-di-dah-dah with NO SPACING.
The K3 internal CW keyer is not very forgiving in this regard. I think many
people who have reported difficulty recording the CW memories from the
paddle
While this is absolutely true, Dick (K3/KX3 Utility author)-
The whole idea of CW to RTTY is to -not- require a computer. 8-)
The K3 CW keyer routines could use some tweaking in the area of spacing
rigidity. (IMHO)
73 and keep up the great work,
Bruce, N1RX
You can put this into a CW memory
Dick,
So you are suggesting loading an RTTY memory with just an IM to end a
CW-RTTY transmission? IOW, send your message via the paddle, the recall a
memory to send the IM?
-Bruce, N1RX
__
Elecraft mailing list
Home:
For those that don't know Robert Heinlein:
TANSTAAFL= There ain't no such thing as a free lunch.
There is wisdom here.
What Mike is saying is that, even though your auto-tuner may find a match to
make the transmitter happy, there may be more efficient ways of coupling
your signal to the ether.
Sadly, Al- I believe quite a few Big Guns that enjoy reading their calls
in the contest reports feel exactly this way. To them it would be
detrimental to clean up their signals. They have no incentive at all to
care.
73,
Bruce, N1RX
I once spoke to a nationally-known, Big Gun contester who felt
What Don was trying to express was that if you simply add a resistor to your
own antenna, you don't need to worry/wonder about whether or not it is
included in a particular transceiver.
It may be good engineering practice to add it to a transceiver one is
designing. However, if you do it
Tom, the data area occupies part of the waterfall area of the screen. Have
you tried increasing the waterfall height?
-Bruce, N1RX
The window sizes on the screen on my P3 SVGA only go from 2-5 on WinR and
from 0-3 on WinT when setting up for RTTY. The manual says the window
sizes should go
engineer (Paul) will chime in when he sees this.
73,
Bruce, N1RX
-Original Message-
From: Thomas Lutz [mailto:tel...@earthlink.net]
Sent: Monday, September 03, 2012 2:23 PM
To: Bruce Beford
Subject: Re: [Elecraft] P3 SVGA Tx/Rx Window Sizes
The water fall is not on.
On 9/3/12 1:11 PM, Bruce
skinny waterfall display.
GL,
Bruce, N1RX
-Original Message-
From: Thomas Lutz [mailto:tel...@earthlink.net]
Sent: Monday, September 03, 2012 3:35 PM
To: Bruce Beford
Subject: Re: [Elecraft] P3 SVGA Tx/Rx Window Sizes
I'll give that a try. But in the menu it only shows 0-4 lines when
From what I could tell from the manual,
Line Out to my PC ought to be a level adjusted by Config: Line Out.
However, each time I turned down the AF control, the signal to FLdigi
went away.
Dick, from the menu parameter section of the manual: (see second paragraph.
Try tapping 1 while in the
Fred,
Others here (none-FT5000) owners may be able to help with your question if
they knew specifically what you were talking about. In the context of your
question regarding the K3, what is DNR specifically control on the FT5000?
Being in the medical field, I associate DNR with do not
someone would not know that.
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bruce Beford
Sent: Sunday, September 02, 2012 6:14 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 DNR
Fred
Well Fred, I don't know who's in charge of the VE sessions you have attended
but... I have been a VE for many years. I head up our local ARRL VEC
sponsored team. The only time I have required multiple forms of ID is when
an appropriate photo ID was not available. Generally, this has been for
young
(speaking from experience)
If past is prologue, then the new prices will simply go into effect without
further announcement or elucidation. I suggest you decide what you want,
what it is worth to you, and whether you can afford it now or risk waiting.
It my experience, it is only worth worrying
I agree with Dick on this one as well. Guy put it well in his reply-
Installing beta firmware should be a very deliberate process, taken on by
the user who knows he is trying something that is perhaps not ready for
prime time. The process for loading beta firmware, including downloading
files,
Have you looked around yourself yet? Though not small, my 17 HP dv6 laptop
has stereo input on-board. I am sure there are several others. Just takes
some research...
GL,
Bruce, N1RX
I gather that no one has found a small laptop with stereo input ( mike
or line in) that will work with no
101 - 200 of 561 matches
Mail list logo