Hi,
Can anyone point me at some resources to better understand why I want a
K3, as opposed to keeping my Icom 756 Pro III? I am considering the
purchase of a K3/100, I saw a presentation on it at our club meeting,
liked what I saw very much and would like to get more input from people
actually
Hi Dave (K6LL),
Thanks for that thought, but I am pretty sure it is not their rigs...
Here is my reasoning for why I think that:
One rig is a K3, and an AL-1500, about 1/2 mile from me, and line of
sight. One of the the others is a 756 PRO III, and I don't know what
amp, about a half mile from
Bill,
Thank you for your thoughts here! You inadvertently answered a question
I was going to ask, about the K3 vs. the current Flex product. Thank
you again!
I have a request in the Yahoo groups to join as well, so I should be
able to get more data as needed.
In my wanderings across the net
nearby ham
uses a K3/P3/KPA500/KAT500 -- and I've now upgraded to match him :-)
73, Phil
On 4/5/14, 8:58 AM, David Cole wrote:
Hi,
Can anyone point me at some resources to better understand why I want a
K3, as opposed to keeping my Icom 756 Pro III? I am considering the
purchase
is, This is the
last radio I'll ever buy. Perhaps overstated, but the sentiment is real.
People have different likes and dislikes with respect to radio
equipment. If you like the K3 enough to buy it, then pretty sure you'll
never look back.
...robert
On 4/5/2014 15:58, David Cole wrote
?
--
Support better RFI practices, please sign this petition:
at Whitehouse.gov
http://wh.gov/lpz5Y
On Sat, 2014-04-05 at 10:25 -0700, Bill Turner wrote:
ORIGINAL MESSAGE: (may be snipped)
On 4/5/2014 8:58 AM, David Cole wrote:
Hi,
Can anyone point me at some resources to better
mile away whose transmitted phase noise and spurs from an Icom rig
and amp wipe out a substantial portion of any band he's on.
73,
... Joe, W4TV
On 4/5/2014 12:51 PM, David Cole wrote:
Hi Dave (K6LL),
Thanks for that thought, but I am pretty sure it is not their rigs...
Here
sign this petition:
at Whitehouse.gov
http://wh.gov/lpz5Y
On Sat, 2014-04-05 at 13:42 -0400, Joe Subich, W4TV wrote:
One thing I was not clear on in the demo, just how wide can the
panadaptor be made to show?
200 KHz.
73,
... Joe, W4TV
On 4/5/2014 1:36 PM, David Cole
.
That is probably the main reason that i subsequently bought the rig.
Slava, W2RMS
On Apr 5, 2014, at 11:58 AM, David Cole d...@nk7z.net wrote:
Hi,
Can anyone point me at some resources to better understand why I want a
K3, as opposed to keeping my Icom 756 Pro III? I am considering
Hi all,
Nice rig, and thanks to all for answering... I have formulated the
first, (of many-- I am sure), questions.
Can the second RX be phase shifted relative to the main RX in order to
try some RFI cancellation?
It strikes me that a local RFI source will maintain a relatively stable
phase
I just ordered KE7X's book, and will use it to help me understand how to
configure my order for a rig. Based on all the positive reports, here,
and in many private emails, I will be ordering a fully loaded K3
shortly. I am a firm believer in user base support, and my God this
radio has that! It
Thank you gents... :)
I was in contact with this person. I was unaware the post came for out
country. You all probably just saved me a few bucks! I would hope I
might have caught it, my last email was to ask where the radio was, so I
could drive to it to see it, but I might have gotten
Hello,
What rig interface are most of you all using for computer controlled
radios? What model and why please? I currently have a Rigblaster Pro,
and will be selling it along with the Pro III.
--
Support better RFI practices, please sign this petition:
at Whitehouse.gov
http://wh.gov/lpz5Y
As a result of all of you helping me better understand the K3 here is
what I have come up with as a buy list for a K3 purchase.
I wonder if anyone would not mind looking it over, with an eye towards
suggestions to me if you see something I missed.
Also a few questions first:
1. Do I need
.
73, Mike NF4L
On Apr 6, 2014, at 10:57 AM, David Cole d...@nk7z.net wrote:
Hello,
What rig interface are most of you all using for computer controlled
radios? What model and why please? I currently have a Rigblaster Pro,
and will be selling it along with the Pro III
Does the K3 have a CW keyer memory? IE., can I program up a CQ TEST, in
one memory, then the 599 00X in the other?
--
Support better RFI practices, please sign this petition:
at Whitehouse.gov
http://wh.gov/lpz5Y
__
Elecraft
Hi all,
Here is the revised build so far... Again, please feel free to take it
apart and tell me what I missed...
K3/100 Radio
KAR3-F ATU
KBPF3 Gen COverage RX Mod, X2 one for Sub RX, one for main RX
KRX3-F 2nd RX mod
KDVR3 Voice Recorder
KFLA3A-250
Hello all,
Previously there was a K3 for sale here, and a question was brought up
as to the validity of the seller. This was the rig with the son selling
for his father. The son was out of the US when he posted the ad on
Craig's list, which is why it showed as not from the US. The father's
there are many folks committing Internet fraud, and the savvy users
on this reflector are just trying to help prevent a ripoff.
Steve AA6VO
On Monday, April 7, 2014, David Cole [via Elecraft]
ml-node+s365791n7586767...@n2.nabble.com wrote:
Hello all,
Previously there was a K3 for sale
I run a ground buss across the back of the radio desk, connect all rigs
to that, then connect that buss to a star ground which also goes to a
second bus running across the second level of equipment. The star then
goes to ground.
--
Support better RFI practices, please sign this petition:
at
Hello all,
Many thanks to all that answered my many questions, and gave a new
person a hand in understanding a new rig.
I have decided to order a new rig based on what was said here, about a
30 minute conversations with a fellow named Dave at Elecraft, and that
eham gives it a 4.9 rating,
Rig is ordered!
--
Support better RFI practices, please sign this petition:
at Whitehouse.gov
http://wh.gov/lpz5Y
On Mon, 2014-04-07 at 12:44 -0700, David Cole wrote:
Hello all,
Many thanks to all that answered my many questions, and gave a new
person a hand in understanding a new rig
/lpz5Y
On Tue, 2014-04-08 at 09:47 -0700, Jim Brown wrote:
On 4/7/2014 1:56 PM, David Cole wrote:
Rig is ordered!
I see that you are buying factory-built rather than kits. I STRONGLY
recommend buying kits. You save 10-15%, and you see how the radio goes
together. It takes about 8 hours
Hello all,
Now that the K3 is ordered, (6 more days till I get it, and counting), I
am getting things ready for it.
I have an LDG AT-1000 PRO II tuner I used on my Icom Pro 3, post amp.
There was a nice cable for the Icom, so that all I had to do was to hit
the tune button on the Icom, and
My K3 arrives on the 15th. Can't wait!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
Hi Toby,
Could you expand a bit on the choppy CW thing? I am a new K3 person,
and I just bought my K3. All this talk about choppy CW makes me a bit
apprehensive. If I use a normal Vibroplex iambic paddle, and send well
am I going to have a problem, or is this something about using the KBD
/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Sat, 2014-04-12 at 15:35 -0700, Fred Jensen wrote:
On 4/12/2014 1:07 PM, David Cole wrote:
Could you expand a bit on the choppy CW thing? I am a new K3 person,
and I just bought my K3. All
at 30 wpm or more. I have never had any problems with clicks
or anything else. I am often in a QSO with a friend or two who would not
be shy about telling me if my CW keying was clicky, chirpy, or whatever.
73, phil, K7PEH
On Apr 12, 2014, at 4:49 PM, David Cole d...@nk7z.net wrote
Hi,
Thanks for that input, I still have the Pro 3, and will probably sell
it, if the performance is worse than teh K3. I will be able to A/B the
two rigs for about a week prior to station replacement.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW
HI Toby,
Thanks for the thought, I think the issue, at least for me, is more one
of inexperience with the K3 than tech knowledge. I used to be Asst
Chief Engineer for a TV station, for around 20 years, and have been a
ham for well on 40 years now... So tech issues don't worry me too much
I know that if I try full breakin with the Pro3, I get the first
character chopped a bit...
Which brings up my solution to all of this for the Pro3...
I do not run breakin. I set the delay for T/R switching to about .5
seconds. That keeps the transmitter keyed all the time I am sending...
Oh... I have done CW too long... When I saw your _..._, I had to
think about what it was...
As soon as I played it in my head, I knew... I have noticed that of
late if folks ask me what a letter is, I have to think about it to give
them the actual dot/dash code, but if I hear it, it is just
...@mailman.qth.net] On Behalf Of Mike Sanders
Sent: Sunday, April 13, 2014 7:45 AM
To: 'Tom Fitzgerald'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] David Cole...756ProIII vs K3
I agree with Tom. I had a PROIII and then the K3. Both of these radios are
here for the duration. As Tom says my K3
. This is not evident in casual
contesting, but on CW in a crowded band I definitely hear the difference
when switching between the radios. But a good Pro2 or 3 is a very
cost-effective choice.
73, andy ae6y
--
From: David Cole d...@nk7z.net
Sent: Sunday
Brett,
Thanks for that bit of info, I had decided I was going to try just that,
your note indicates it will work, so I am a happy camper now.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
was a converted WWII Arc-V pair,
heavily converted).
You will love it, I predict.
73, Phil w7ox
On 4/13/14, 6:33 PM, David Cole wrote:
That is what I wanted to hear, I bought teh K3 because of the filters...
I am glad to see someone saying something positive them! THANK YOU
-
From: Phil Hystad
Sent: Sunday, April 13, 2014 8:30 PM
To: d...@nk7z.net
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 756ProIII vs K3
And, better than my HQ-170AC and Eico 720 circa '60s.
On Apr 13, 2014, at 7:50 PM, David Cole d...@nk7z.net wrote:
I know it must be better
, 2014, at 7:50 PM, David Cole d...@nk7z.net wrote:
I know it must be better than the old HQ-110, and Eico 720! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
Hi,
Has anyone ordered this book from Lulu before? Any idea what the
delivery time is like? I ordered it before I ordered the radio to
insure it was here when I got the rig, and it is still not here...
Elecraft built the radio faster than Lulu can print the The K3 book...
--
Thanks and
/groups/MM-SSTV/info
On Tue, 2014-04-15 at 07:55 -0700, Phil Hystad wrote:
Complain to LuLu and then ask for a downloadable PDF copy while you wait. I
ordered my copy from LuLu but can't remember how long it took.
PEH's iPad
On Apr 15, 2014, at 7:04 AM, David Cole d...@nk7z.net wrote:
Hi
my copy from LuLu but can't remember how long it took.
PEH's iPad
On Apr 15, 2014, at 7:04 AM, David Cole d...@nk7z.net wrote:
Hi,
Has anyone ordered this book from Lulu before? Any idea what the
delivery time is like? I ordered it before I ordered the radio to
insure it was here
.
73,
Fred KE7X
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Cole
Sent: Tuesday, April 15, 2014 9:19 AM
To: Phil Hystad
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] The Elecraft K3, design
Hi All,
The radio arrived, all is working well! The book by KE7X arrived a day
later...
I have the rig on air, and it appears to be working great. Quite a
learning curve... But I am taking it one step at a time, getting each
function working, then rewiring the shack to accommodate.
I
Hi Don,
Thank you for that info, I have powered everything, (except for the
amp), off a single largish UPS, that way the grounds are the same, and I
get a few minutes to kill power of the commercial power dies...
I will be adding a new ground rod to the house ground system, and
bonding that to
such as punching holes through the house
foundation). All towers and masts are grounded to this system.
Your home safety demands that you tie all grounds together and tie into
the utility ground system.
73,
Don W3FPR
On 4/16/2014 9:13 PM, David Cole wrote:
Hi Don,
Thank you
Hello all,
This is for the person, (sorry I forgot your name), who mentioned he
put a small prescription bottle cap of some sort over his microphone
connector on the front panel of the K3 in order to protect the
microphone pins, and keep dust out.
I just discovered that the little metal caps
Hi all,
I thought I might communicate my initial feelings/impressions regarding
the K3 vs. the Pro 3.
There is no question the K3 is a better receiver than the Pro 3; period!
Overall I can hear things on the K3 I was not able to hear on the Pro 3.
I did a very short, (didn't take too long to
operation? I suppose all your A/B tests are
related to CW mode.
Please enlighten me.
73
Johnny VR2XMC
K-Line
寄件人︰ David Cole d...@nk7z.net
收件人︰ elecraft@mailman.qth.net
傳送日期︰ 2014年04月17日 (週四) 10:28 PM
主題︰ [Elecraft] K3 First Impressions
Hi all,
I thought I might
Hi,
New K3 owner here...
I have looked in the KE7X book, and can not find the answer to two
questions...
1. When in transmit using SSB, I am getting some sort of audio feedback
only when I have the monitor level turned up. The louder I turn up
Monitor, the more feedback I get.
2. I have
Hi Gary,
I think you are right about MON level being too high... I will test
this later today...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
On Saturday, April 19, 2014 6:38 PM, David Cole d...@nk7z.net wrote:
Hi Gary,
I think you are right about MON level being too high... I will test
this later today...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http
Hi Tom,
Thank you for the help here! The NR showing N/A was caused by my having
the AGC off. I was unaware that killed the NR.
The feedback problem is not that simple... I believe it is feeding back
via the sound card... More as I narrow it down. Not a simple matter of
having the audio up...
Don,
I will check, thank you sir!!! I have discovered that it is good to go
slowly on all changes... :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi Scott,
I don't feel the need to have the monitor turned on. I do feel the need
to understand what is happening is all... New radio to me, and
complicated enough I no longer trust my ability to look and use with out
looking at the books... :)
--
Thanks and 73's,
For equipment, and software
Manthe wrote:
We've all been there, David. And my comment was not meant as a
criticism, I was just curious.
73,
Scott, N9AA
On 4/20/14 5:41 PM, David Cole wrote:
Hi Scott,
I don't feel the need to have the monitor turned on. I do feel the need
to understand what is happening is all
Are you in DATA mode when you use JT65. What mode for PSK?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
, David Cole wrote:
Are you in DATA mode when you use JT65. What mode for PSK?
RTFM. :) If you're using a computer to generate the signal, use DATA A
for everything but RTTY. For RTTY from the computer use AFSK.
__
Elecraft mailing
Mine took exactly 3 business days to arrive... I was given tracking info
etc. I ordered 3 day shipping, and got 3 day shipping. Maybe UPS
messed it up?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
I believe that when you see $999 as the shipping cost, you have failed
to select a shipping method.
That particular trigger pointed out to me, an error I made in my
shipping selections... I corrected it, and all was well... I decided
to not take UPS ground, because of the stated possible 7
Hi,
Next time you are on Amazon, look at the prices for the same non-prime
item... They are usually on the order of a few bucks less, but you pay
shipping... You get what you pay for...
With Amazon Prime, you are paying for fast shipments... Even though
they don't make it obvious, by
Yet more reasons to avoid Alaska! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
Oh Dear God Scott...
Please don't say that to loudly... I can see a time when the radio
tweets every successful contact made...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for
Given I JUST bought a K3 I am sort of glad to hear that. :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
Hi all,
I have to say, after a week of using the K3, I am just so damned happy
with it I can't describe the feeling.
This rig does almost anything I can think of... I had a level issue on
Line out... Yes, it has an adjustment for that, (wish it was by band),
I want to set some macros for it,
Hello,
Is there a way using the P3 Utility program to save the captured scan to
disk, as opposed to a screen shot then saving and editing that shot? I
would like to be able to grab a shot from the P3, and save just that
shot to disk.
--
Thanks and 73's,
For equipment, and software setups and
A kind person pointed out that there was a Save As' in the drop down
dialog box under FILE. I just assumed there was not one when I did not
see it in a right click dialog box
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Hi,
I know why I missed it... I tried via a RIGHT CLICK in the image, got a
dialog menu, but it did not have SAVEAS in it, so I just assumed it was
not available...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Hi,
Sorry to jump in on the thread, without an answer, but a question-- why
the need for a low end below 200 HZ? We are not broadcast stations
after all... Maybe I am missing something but I see zero reason for all
of this Extended SSB, all it seems to do is cause splatter...
--
Thanks and
.
The infantile fascination with SSB flat from 50 Hz to 4000 Hz is
nothing more than another childish, bandwidth wasting, QRM generating
temper-tantrum from those who don't know better or don't care.
73,
... Joe, W4TV
On 4/27/2014 10:13 AM, David Cole wrote:
Hi,
Sorry to jump
/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Sun, 2014-04-27 at 12:04 -0700, Phil Kane wrote:
On 4/27/2014 7:13 AM, David Cole wrote:
Sorry to jump in on the thread, without an answer, but a question-- why
the need for a low end below 200
Keith,
Respectfully, I think you missed an important part of Joe's post. The
rules state-- that for the mode used, not the least broad mode, nor the
narrowest mode possible, but for the mode being used...
97.307(a):
No amateur station transmission shall occupy more bandwidth
than necessary for
Larry,
Respectfully, I have to disagree with you here... I built a state of
the art fully digital audio studio for movie studio use three years ago,
so I would fall into the Audio Guys group...
I really do think ESSB sounds cool, and the audio person in me likes to
hear it, but the engineer in
:04 PM, David Cole d...@nk7z.net wrote:
Larry,
Respectfully, I have to disagree with you here... I built a
state of
the art fully digital audio studio for movie studio use three
years ago,
so I would fall into the Audio Guys group
Milverton,
Again, respectfully I submit that you are trying to shift the subject
off of ESSB, to anywhere else now.
Joe is not talking about Contesting, he is talking about ESSB.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Joe,
You have answered a question that myself and another ham in my area have
been wondering about... Why are we starting to see the other sideband
in some signals... THANK YOU!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
to make qso's on 160 using
some type of incredibly slow transmission mode that appears to most as
local qrm. Because you can, doesn't mean you should.
Mike W0MU
On 4/27/2014 10:26 PM, David Cole wrote:
Milverton,
Respectfully, your reply does not answer the question-- is there really
Hi,
All the ESSB talk got me wondering about how accurate the P3 might be
for measuring bandwidth. Could someone review my method for this
outlined below and comment please:
1. Use ATT if needed to avoid very strong signals
2. Set bandwidth to 4 KHz. See note below.
3. Adjust Span on P3 5
Larry,
I have been totally polite to you, and everyone else in this
interchange. I have politely asked you questions, (without adding
prejudice to the question), and I have not gotten a single answer from
you. I did get an answer from W0MU, and for that I am grateful, he and
I disagree on the
://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Mon, 2014-04-28 at 07:25 -0700, David Cole wrote:
Larry,
I have been totally polite to you, and everyone else in this
interchange. I have politely asked you questions, (without adding
Hello,
Between Vic's, and Alan's answer I have what I need, thank you all!!! I
can now measure bandwidth, and tell how many db down a signal is vs.
it's width. Thank you gents!
Peak hold, then measure! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
Jim,
Thank you for the extended explanation, it helps! I want to be sure I
understand the rig, the Panadaptor, and how they interrelate. THank
you again!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Hi Slava,
I have also noticed this, is the robotic sound you are referring to a
low frequency sort of wha wha sound which modulates along with the
normal voice signal.
I have heard this before as well, and had a friend describe it as
typical Icom, which leaves me in the dark about what it is,
Thank you Joe, I have been looking for an explanation of most of what
you covered here for several months. I'll pass it on to my buddy that
mentioned the Icom sound!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Would be nice if ALL Elecraft programs were also available in Linux...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Thu, 2014-05-01 at 19:21 +0200, Martin Kratoska wrote:
+1
I second all asking Elecraft software available for Linux!
73
Martin, OK1RR
Dne 1.5.2014 18:49, David Cole napsal(a):
Would be nice if ALL Elecraft programs were
Just for the record... It would have been a show stopper for me if the
K3 software was only Windows... Now that I have had a chance to play
with the rig a bit more, I still might have bought it, but I really do
thank Elecraft for supporting Debian and the other forms of Linux.
--
Thanks and
/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Thu, 2014-05-01 at 15:56 -0700, Jim Brown wrote:
On 5/1/2014 3:17 PM, David Cole wrote:
It would have been a show stopper for me
Hello Niel,
Not sure if this is appropriate for this group, but I'll post a response
and see. If not, we can take off line... Your response seems right in
step with where I would be. You might consider your first step as
running your radio on batteries, and killing power to your home. If you
I must also concur with Dale, et al. I also have a set of glasses I had
the Optometrist prescribe, and I can not use my bifocals anymore, too
much head movement... That was th best money I have spent in a long
time. One thing you might consider is adding an AR coating to them.
I use ONLY
Hi,
Does anyone have an example Hex command being fired off to a K3 from a
MixW Macro they could send me please?
I used to have a set of macros for MixW and my Pro 3, and want to
recreate them. I can send hex out from MixW, so I want to see if I can
do some control via MixW Macros.
--
Thanks
://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Fri, 2014-05-02 at 09:51 -0500, Tony Estep wrote:
On Fri, May 2, 2014 at 9:17 AM, David Cole d...@nk7z.net wrote
-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Fri, 2014-05-02 at 09:51 -0500, Tony Estep wrote:
On Fri, May 2, 2014 at 9:17 AM, David Cole d...@nk7z.net wrote:
...an example Hex command being fired off to a K3 from a
MixW Macro...
===
Dave,
Here are three
/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Fri, 2014-05-02 at 10:55 -0500, Tony Estep wrote:
On Fri, May 2, 2014 at 10:22 AM, David Cole d...@nk7z.net wrote:
...Where did you get the list of commands...
===
If you have the MixW
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Fri, 2014-05-02 at 10:04 -0700, David Cole wrote:
Again, thank you Tony
Hi,
I noticed the same thing with my order of a few weeks ago... Everyone I
dealt with seemed to actually have a clue! Very refreshing.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for
Phil,
Are you a member of the Yahoo group in my sig below? If not, join, then
look in the files section. There is a fellow there who has totally
rewritten all the help files and keeps them current.
If you do get them, and like them, please thank him... He is a fellow
from the UK, and I can't
I Probably should have suggested this on the first email, post to the
list in my sig. You will get an answer, there are literately several
thousand MixW users there. 4k users signed up to that list.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW
A friend of mine mentioned that the screws used in Icom radios and such
were some special type... He even bought some special screwdriver for
them... Something about the heads being slightly different from normal
Phillips head. Any one know if this is true?
--
Thanks and 73's,
For equipment,
Old Heathkit trick. :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
This humorous advert resulted in sale of Icom Pro III in under a few
hours. I have since pulled the Crag's list ad. It was posted to two of
my local mail lists for Oregon and Washington:
===CUT===
Hi all,
I have drank the Elecraft Kool-Aid and it was good!
My Icom Pro 3 is for sale:
1 - 100 of 378 matches
Mail list logo
