was a
different story, and with the K2, I worked everyone I
called, using the same inverted L. Had about a page (30) 80 meter contacts.
Jim Sheldon, W0EB
K2# 4338
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Robert McGwier
Sent: Monday, June 28, 2004
-12 antenna.
Jim Sheldon, W0EB
K2 #4338
Bob Nielsen wrote:
On Fri, Jul 02, 2004 at 08:30:15PM -0400, Jimmy Lee wrote:
What antenna do you use for portable operation? I have 66 foot doublet
fed with 300 ohm line and a 85 foot wire with a 17 foot counterpoise.
Any other suggestions
Don't forget that the monthly FPQRP Run For The Bacon sprint is
tonight! It runs from 0100 to 0300 UTC, which for the UTC Challenged
among us, is: 6pm Pacific time, 7pm Mountain time, 8pm Central time and
9pm Eastern time. It runs for 2 hours. See the FP website at
www.fpqrp.com and click on
there. It would be nice to have examples of the K2/100, K1 and KX1
there if at all possible.
Jim Sheldon, W0EB
K2 #4338
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
a
little dirty, occasionally the hand key will cause alternating dots/dashes
to be sent. Not sure if this is a diode anomaly or something else.
Cleaning the contacts on the handkey by burnishing with a piece of heavy
paper has always seemed to fix the problem when it occurs.
Jim Sheldon - W0EB
K2
Right now 40 meters is open to Europe from Kansas. Just worked OM3SEM in
the Slovak Republic with my K2 at 5 watts and a dipole.
Jim - W0EB
Wichita, KS
K2 #4338
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.784 / Virus
just
like the book said, and by 7:30 p.m. it was On The Air - First SSB QSO was
Wichita, KS to KC8CPT in Michigan, He gave me excellent audio and a 5-6
signal report. Power was set to 5 watts, the antenna was a B W BWD-90
folded dipole at 25 feet. This rig just gets better and better.
Jim Sheldon
and start sending a string of A's.
Release and hit the key again, and it goes back to being the hand key or
bug. Is this possibly a problem in the autodetect routine, or maybe the two
diodes need to be very closely matched? Any ideas on this.
Jim Sheldon, W0EB
Wichita, KS
K2 #4338
Yeah, but that looks tacky hi hi. The K2 is more elegant than that. Buy
yourself one of those finger dimples. It looks good on the knob, and once
you get used to it, makes speed-tuning a snap.
W0EB
K2 #4338
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Anyone wanting to read the report and see some of the pictures of the
Seminar on QRP operating I put on at Chanute, KS (2 hours East of
Wichita)with a lot of help from several Elecrafters and others, can point
their browsers at http://www.4sqrp.com which is the website of the 4 State
QRP Group.
Hans,
If you like the K1, just wait till you build and use the K2 .. Fantastic
radio. I've used both the K1 and K2, and they are both absolutly the best
in their class. Have only seen the KX1, but have not had a chance to
operate one yet. Having too much fun working DX from Kansas with my K2 @
Don't forget tonight's the April RFTB - starts at 8:00 Central, 0100Z
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
.
Jim - W0EB
-Original Message-
From: Tom Hammond [mailto:[EMAIL PROTECTED]
Sent: Monday, May 09, 2005 8:37 AM
To: Jim Sheldon
Subject: Re: [Elecraft] K2: Erratic action of the Hand Key
Autodetect function
Hi Jim:
Of course, the HARD-WIRED way to fix the problem should
PROTECTED]; 'Jim Sheldon'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K2: Erratic action of the Hand Key
Autodetect function
If Sverre's solution to the problem (Schottky diodes) is the
answer, then
the 1N5711 should work nicely... and they are pretty easy to
find... even
if you
I too, have the K2 as my only rig in the home shack and I plan to keep it
that way. Antenna system at home consists of a B W BWD-90 broadband folded
dipole for 80-40-30 and the rest of the WARC bands. 20-15-10 is a Cushcraft
A3S on a 10' tripod mounted on the roof of my garage which puts it
Ken, KG0WX now has his new K2 #4913 on the air -- worked him on 7.040 just a
few minutes ago for his first K2 to K2 contact. I'm sure he is really
appreciative of all the help the elecrafters gave him in getting it going.
He bought his after seeing mine at a local hamfest, and he commented to me
a
fancy, expensive microphone to sound good on the air. Pick up a $2.00 CB
hand mic at a hamfest, wire it to fit and operate. Quit arguing over which
microphone sounds better, you are losing valuable operating time!
Jim Sheldon, W0EB
-Original Message-
From: [EMAIL PROTECTED]
[mailto
Anyone having an Icom FL-100 (500 Hz) or FL-101 (250 Hz) CW filter for the
IC-706 MKIIG (fits others too), that would like to sell it, please email me
direct with the details. All reasonable prices considered.
Jim - W0EB
[EMAIL PROTECTED]
___
Elecraft
Anyone out there happen to have a Butternut HF2V or HF6V vertical with their
TBR-160-S 160 meter resonator kit on it? If so, would you please email me
off list - I need the values of the 2 doorknob capacitors.
Jim - W0EB
___
Elecraft mailing list
.
Not all APP's are created equal, and some of the plastic material seems to
be harder than others. Probably depends on what plastic mix was used when
they were formed at the factory.
Jim Sheldon, W0EB
___
Elecraft mailing list
Post to: Elecraft
Looking for a vibrating reed type of 60Hz frequency meter for a generator
monitor I'm trying to build for field day. Anyone have one they don't need
and are willing to part with cheap?
Jim, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to:
for ordering and payment info.
Thanks -
Jim Sheldon
W0EB
w...@cox.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
knew I was in the hospital and why, I'm home now and
doing a heck of a lot better. For those who didn't know, I apologize for not
letting you know but there simply wasn't time to get emails out and even less
time for phone calls.
Thanks all,
Jim Sheldon
it definitely states that ham radio equipment will NOT interfere with
it's operation. I do, however have to stay away from arc welders and power
generators. That gets me off the hook for tending the field day generator -
LOL.
Jim Sheldon - W0EB
and payment info. Please don't send
any money until you know for sure I have enough left to fill your order.
Thanks -
Jim Sheldon
W0EB
w...@cox.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
orders only on the rest of these .
Contact me off list please for ordering and payment info. Please don't send
any money until you know for sure I have enough left to fill your order.
Thanks -
Jim Sheldon
W0EB
w...@cox.net
__
Elecraft
The supply of BB105's is now depleted - thanks to all that ordered them.
Jim - W0EB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
the PayPal fee. Shipment will be on the first non-holiday, business day
after the funds arrive. First I'll take it gets it.
Jim Sheldon - W0EB
Wichita, KS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
the PayPal fee. Shipment will be on the first non-holiday, business day
after the funds arrive. First I'll take it gets it.
Jim Sheldon - W0EB
Wichita, KS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Scope is sold, pending funds
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
FS: Dynascan Corp., B K Precision model 3020, solid state sweep/function
generator. Unit is in very good condition with the original instruction
manual. $60.00 shipped anywhere in the US.
Pix available on request. Any interest, please contact me off list to save
bandwidth.
Jim, W0EB
[EMAIL
B K 3020 is Sold!
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
degrees high.
I'm asking $350 shipped anywhere in the US for it. Here's your chance to
get one of the best rework stations available. Pictures on request - email
me off list if you're interested.
I'll take PayPal (add 2.9%), or Money Order - First I'll take it, gets it.
Jim Sheldon - W0EB
[EMAIL
The rework station is sold, pending funds.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
supply worked nicely for running the K2 and keeping
it's internal battery charged by setting the voltage to 14.5 (well within
it's range).
Both supplies have external terminal strips for AC in and DC out.
Anyone interested, contact me off list - [EMAIL PROTECTED]
Jim Sheldon, W0EB
Beware
with my tax refund rebate.
Asking $525 shipped anywhere in the US.
Contact me off list if interested.
Jim Sheldon, W0EB,
Wichita, KS
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
It's already off the market.
Thanks for all the interest.
Jim - W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://ducie2008.dl1mgb.com/ is the official website of the dxpedition.
There you will find the on-line log, all sorts of news about what's
happening, pictures etc. and if you click on Site Map you will see an
aerial photo of Ducie with all the antenna site/information superimposed.
Very
Since I got my IC-7000 with the IF DSP, I no longer need the sharp 250Hz CW
filter for the 706MKIIG.
Asking $75 which includes shipping anywhere in the US.
Anyone interested, contact me off list please - [EMAIL PROTECTED]
JIm - W0EB
___
I'm listening to VP6DX on 21.025 right now, and there doesn't appear to be
any drift at all here. IC706MKIIG with 500Hz filter. They are staying
right solid where I set them in the filter.
W0EB
Beware the man who only has one gun. He probably knows how to use it!
Filter has been sold
JIm - W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Got an LDG AT-7000 auto-tuner to go with my IC-7000 (stopgap radio until I
get a K3) and no longer need the MFJ. It's in like new condition and will
tune just about anything. Covers 160 through 10 meters (actually will go to
6 meters on some antennas). MFJ rates it for 3KW PEP and I've run a KW
For those of you that have believed the one bad review on the K3 by a
nameless (other than his internet username) individual, you might want to
check out what the Ducie Island DXpedition guys are saying about the K3's
they have been using for the better part of 2 weeks without any problems.
None
Yeah, and I even stopped trying to grab them on 10 meters this evening. 10
didn't open to Wichita at all from Ducie. Was watching the DX cluster and
all of a sudden everyone was spotting 6 meter stuff. I jumped on 6 and
worked a gaggle of stations from Ohio to New Jersey and then down the East
TUNER IS SOLD, PENDING FUNDS.
Jim - W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
They may have the K3 beat color wise, but did you look at the prices? Jeez, 12
grand for the 10 watt version! They must be using solid gold PC boards!
W0EB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob
Sent: Wednesday, February 27, 2008
all the K3's performed properly through the entire 2 weeks or so
they were on the island. Great job Elecraft, and also the expedition team
on Ducie. Professional quality ops, all of them and I wish them Godspeed
and a safe journey home.
Jim Sheldon, W0EB
Wichita, KS
A friend of mine found them in the April 2008 Mouser catalog. The
Anderson type connectors are shown on pages 1284 -1285... They now have
a posted type contact so you can attach the connector to a circuit board.
You can also go to www.mouser.com and go to mouser stock number 571-14459571
to
: Tuesday, March 04, 2008 6:47 AM
To: Jim Sheldon
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another source for Anderson
PowerPole type connectors
Beware! This came up early last summer. Read this posting
on the poor quality
incompatibility of the Tyco copies.
http
For Sale, homebrew crystal radio with 1N34A detector (Salt Box coil form)
works really well and will pick up close stations with 20 foot wire antenna.
Needs high impedance headphones, either crystal or magnetic (2K impedance or
higher)
Also have a set of genuine antique Trimm Featherweight high
of that.
The mag mount was an additional $50
Asking $185 plus shipping for all of it. UPS shipping will probably be
around $20 due to the packaging.
Anyone interested contact me off the list please. I'll take USPS money
order or PayPal.
Jim Sheldon, W0EB
[EMAIL PROTECTED
Antenna package has been sold pending funds.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
I have one IC-2100H, 2 meter FM rig for sale. Rig is minus microphone (got
run over by wife's car) and power cord (standard T type connector). Would
make a good dedicated APRS radio for someone, or you could replace the
microphone and use it as is. Rig is working and puts out 58 watts on high,
Radio has been SOLD,
Jim - W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
FS: PIC Programmer that has both a 9 pin serial port and USB port on board.
Will program all the current MicroChip PIC's and is upgradable to add new
PIC's as they are brought out.
Original cost in kit form was $49.95 plus $17.95 for the programmer and 40
pin ZIF (zero insertion force) socket
Programmer is sold pending funds.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
of service manual
are also included).
No mounting bracket or hardware and no separation kit, but control head can
be separated from radio with the proper cable.
Asking $135 plus $9 for USPS priority shipping anywhere in the US.
Money order or PayPal with PayPal preferred.
Interested, contact Jim
IC-207 has been sold. Thanks to all that responded.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Just in case you guys wonder where this stuff came from, it was used to
hold up military camouflage netting. Those paddle base plates really aren't
base plates, they were used at the top of the mast sections to keep it from
tearing through the netting.
This stuff takes a little getting used to
For sale: Vibroplex model Original Deluxe with serial # in the 200,000's
that dates it to 1962. It is in very good condition and a well constructed
homebrew felt lined wooden carrying case is included. Asking $125.00
shipped to anywhere in the US. Outside the US will require extra postage
and
The key has been sold. - Going to KH6 land.
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
$230 shipped anywhere in the US.
Interested parties please contact me off the reflector.
Jim Sheldon - W0EB
[EMAIL PROTECTED]
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults
Unit is Sold
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
The RLC AS-120B has been sold
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Both attenuators have now been sold
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
have for sale 3 Parallax BASIC Stamp-1 modules, 3 carrier boards and 2
serial display boards (1 used, 1 brand new), 1 25 pin serial programming
cable. The documentation can be downloaded from Parallax's website. (Doc's
included in the new BPI-216 serial display package) some application notes
BASIC Stamp modules have been sold.
W0EB
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.
(When catapults are outlawed, only outlaws will have catapults!)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
/mobile radio, and mounting
brackets/power cords can easily be found at hamfests.
Asking $90.00 plus $10 shipping anywhere in the US. Check, Money Order or
Pay Pal, with PayPal preferred.
Anyone interested, email me off the list
Jim Sheldon, W0EB
[EMAIL PROTECTED
IC-3220 is sold, pending funds.
W0EB
-Original Message-
On Behalf Of Jim Sheldon
Sent: Tuesday, April 17, 2007 3:54 PM
To: 'Elecraft Mailing List'
Subject: [Elecraft] OT: FS - Icom IC-3220 Dual Band FM rig
For sale (from an estate) Icom 3220H dual band mobile 2M/70CM
FM rig
watts, 100-250 MHz), 50D(50 watts, 200-500 MHz), 100C (100
watts, 100-250 MHz) and 100E (100 Watts, 400-1000 MHz).
I'll take certified check, money order or Pay Pal
Interested? please reply off the reflector to:
Jim Sheldon, W0EB
[EMAIL PROTECTED
Sorry guys, Wattmeter sold within 5 minutes.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
off the reflector please to minimise bandwidth. I'll take
certified check, money order or Pay Pal. (Pay Pal add 3 percent as that's
what they charge me).
Jim Sheldon - W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft
The MBT-100 has been sold - Thanks to all who inquired.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
. I'll take money order or PayPal.
Inquiries off list please to keep reflector bandwidth to a minimum, thanks.
Jim Sheldon, W0EB
K2 #4338
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Paddles have been sold, thanks to all that enquired.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
audio of the station you are listening to if
there is a reasonably strong signal within 5 to 10 KHz of the signal you are
trying to receive. This occurs with ANY noise blanker, not just the KNB2.
Jim Sheldon, W0EB
K2 #4338
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
.
Interested parties contact me off list please.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
K2 #4338 has been sold - thanks to all that enquired.
Jim - W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
. It can be powered from a 9-12 volt wall wart or an internal 9 volt
battery (included).
Asking $85.00 shipped anywhere in the US Please reply off the reflector to
save bandwidth.
I'll accept check/money order or Pay Pal. If PayPal, will ship same day
funds are received (USPS Priority Mail).
Jim
WM-2 has been spoken for.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
for. Instructions are on the order page for check, money order or
PayPal.
I can also make custom buttons with your club's logo (you supply the logo)
and individual callsigns, membership numbers and other things. Contact me
by email or phone for further information.
Jim Sheldon, W0EB
than the low resolution images shown on the webpage. This is a
shameless plug for my product which will only show up on the reflector
approximately once a month unless Eric or Wayne tell me not to.
www.members.cox.net/w0eb
Jim Sheldon - W0EB
, please contact me off list.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
/adapters.
The input connector is an SO-239 and I'll include an adapter to BNC as well.
I'll accept cash, check, money order or PayPal
Anyone interested please contact me off list.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post
contact me off list. I'll take cash,
check, money order or PayPal.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
VA-1 has been sold and shipped. Thanks to all those who inquired.
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
output header
(user supplied). I'll build it for you for an additional $5.00 The NorCal
dummy load is still available from them. See www.norcalqrp.org for those
details.
Interested parties email me off list please.
I'll take cash, check, money order or PayPal. Actually I prefer PayPal.
Jim Sheldon
The N-Gen dummy load have been spoken for,
Thanks to all that inquired.
73, Happy Holidays
Jim - W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
reply off list to [EMAIL PROTECTED]
Jim Sheldon, W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
(can't export it), but the price
is somewhat negotiable.
Anyone seriously interested please contact me off the reflector.
Jim Sheldon, W0EB
Wichita, KS
[EMAIL PROTECTED]
316-744-3022
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
. This is a bit
cheaper than you can get them from Badge-A-Minit.
Entire system, shipped anywhere in the U.S. $285.00 (I'm going to put the
money toward a new KX-1).
Serious inquiries only, please reply off list.
Jim Sheldon, W0EB
[EMAIL PROTECTED]
K2 #4338
. Button parts go for about $25 per hundred, and buttons can be
sold for anywhere from $2 to $5 depending on what you put on them.
Jim Sheldon - W0EB
Wichita, KS
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Anyone on this list have a manual for a Ten-Tec Centaur 411 amplifier that
they don't need anymore or would be willing to either copy it for me, or let
me borrow it long enough to copy it?
Jim Sheldon, W0EB
[EMAIL PROTECTED]
___
Elecraft mailing list
Standard has been spoken for -
W0EB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
KX1 #1268 arrived yesterday. Completed construction and alingnment 15
minutes ago - #1268 is alive and well.
Thanks Elecraft, for producing such a fine little almost pocket radio.
Jim - W0EB
K2#4338, KX1#1268
___
Elecraft mailing list
Post to:
forgot it in my excitement to get my KX1 on the
air.
Oh yeah, first contact with the KX1 was a DX station (PA600GOES - yeah I
know it's a weird call that's pa six hundred goes) in the Netherlands. Got
a 539 on 20 meters - KX1 and a CushCraft A3S tri bander up 25 feet.
Jim Sheldon, W0EB
Wichita
.
Anyone having further questions, feel free to email me off list.
73,
Jim Sheldon, W0EB
Wichita, KS
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Hello Simon,
I just built my KX1 and like you thought the paddles wouldn't be good for
me. Wayne, N6KR convinced me to try them, and I must admit as he said, they
grow on you, and they are really convenient. When constructed properly
according to the instructions, they actually have a nice feel,
Hi Kevin,
Thanks for the heads-up on Tom and W0O. Managed to catch him on 14.027.5
and he says there is another one on 7.029 or thereabouts as well.
Jim - W0EB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Rock
Sent: Monday, October 31,
Still debating about buying a K1, K2, K2/100 or KX1? For a firsthand look
at them, come join W0EB (Jim), WG5F (Ed), KL7Y (Sam) and N3ARU (Dwight), at
the Enid, Oklahoma hamfest this coming Saturday, November 05, 2005. Ed,
Sam, Dwight and I will be manning a table resplendant with the Elecraft
1 - 100 of 497 matches
Mail list logo
