done it before and i'm sure someone on here is a expert on it
cheers
andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
No I wouldn't use drill chucks
On Mon, 15 Apr 2024, 14:25 Billy via Emc-users, <
emc-users@lists.sourceforge.net> wrote:
> This is for a 24k 4HP spindle. Using ER32 ISO 30 tool holders. Probably
> not going to be using any drill chucks in this thing.
>
> > On Apr 14, 2024, at 9:59 PM, gene
Awesome
I'll try it in a few days
On Fri, 12 Apr 2024, 00:06 andy pugh, wrote:
> On Thu, 11 Apr 2024 at 10:00, andrew beck
> wrote:
>
> >
> > Can I get the updated carousel component without updating.
>
>
> Yes, just grab the carousel.comp file from the Github an
is much more resource intensive and
programs run at about half as snappy
I have tried updating to 2.9 about 6 times now and always go back to 2.8
when I get a mesa card network error
Regards
Andrew
On Thu, 11 Apr 2024, 20:49 andy pugh, wrote:
> On Thu, 11 Apr 2024 at 04:57, andrew beck
>
Hey Andy I see your component supports step direction now.
2 questions.
Does it still do shortest path calculations to speed up tool changes?
And 2nd question does it happen to support analog servo drives with a built
in pid in linuxcnc?
Regards
Andrew
Same here every machine I have used (12 years CNC machining). negative z
is always towards the chuck.
Or on a mill brings the tool down to table. Or table up towards tool
On Tue, 6 Feb 2024, 09:23 Sam Sokolik, wrote:
> Even the k with a discrete component 60's control had smaller numbers
>
Busy using linuxcnc and making more machines
On Sun, 4 Feb 2024, 08:33 , wrote:
> On 2024-02-03 16:30, andy pugh wrote:
> > Is this thing on? I have nothing since the 18th of January, and
> > neither does the archive at Sourceforge.
>
> Message received here OK. Nothing else noted during the
Well I have a lot of capto c6 tooling and I would love to be able to make
my own tooling
Not sure on dimensions though
On Wed, 3 Jan 2024, 14:03 Sam Sokolik, wrote:
> and and... If the receiver shape is just scaled along its taper - then the
> work is done with the hal component.. But would
t of new mini PCs Atom N100 or N9095 16/512GB for $100-120 from
aliexpress right now.
I guess Atom N100 wins in terms of performance, also its TDP is as low as
6W.
WBR, Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourcef
Here is a quick video of some of the different parts
This one is not using the tailstock
https://youtu.be/_3mKA7dri60?si=vafE_I3i054bXf8E
On Thu, 19 Oct 2023, 20:42 andrew beck, wrote:
> Hey guys I think I fixed the issue.
>
> The wear remap is perfect.
>
> The issue was I wa
remap
Andy your carousel component is absolutely awesome.
My toolchanges are so fast now.
We have made 800 parts over the last 3 days with about 6 tool changes each
and perfect operation
I'm happy as
Regards
Andrew
On Fri, 13 Oct 2023, 09:09 andrew beck, wrote:
> Yep I'll keep digg
Yep I'll keep digging and reply back here later
On Fri, 13 Oct 2023, 08:38 andy pugh, wrote:
> On Thu, 12 Oct 2023 at 19:19, andrew beck
> wrote:
>
> > And also the fact that Linux CNC was showing t3 when t3 was the one
> loaded.
> >
> > Even though the cod
).
And axis GUI then updated to t4
On Fri, 13 Oct 2023, 03:43 andy pugh, wrote:
> On Thu, 12 Oct 2023 at 10:33, andrew beck
> wrote:
> >
> > No we pushed cycle stop changed a offset by 0.01mm waited 2 minutes then
> > restarted whole program from beginning.
>
No we pushed cycle stop changed a offset by 0.01mm waited 2 minutes then
restarted whole program from beginning.
On Thu, 12 Oct 2023, 21:59 andy pugh, wrote:
> On Thu, 12 Oct 2023 at 02:41, andrew beck
> wrote:
>
> > We stopped it and then changed a wear offset and it ignored t
Hey guys. Got a problem with my CNC lathe
It randomally tried to run a program with the wrong tool number.
I'm using the fanucy wear offset patch to get wear offsets as linuxcnc
doesn't offer that yet as stock standard.
This lathe has done about 4000 toolchanges faultlessly.
We stopped it and
Thanks so much for the replies guys.
That's great.
I just need 80 tools for now so can work with that and keen to try out any
new features as they come up
On Tue, 3 Oct 2023, 02:59 Rene Hopf via Emc-users, <
emc-users@lists.sourceforge.net> wrote:
>
> On 02.10.23 13:21, andy pugh wrote:
> >
just found this to
https://github.com/spacestate1/linuxcnc/commit/9c6a8d82c60fc40b435b1e8e4c42e8c44a0ed907
does anyone have any more details on it?
On Sun, Oct 1, 2023 at 11:41 PM andrew beck
wrote:
> hey guys
>
> i see there is a new tool table in linuxcnc now. looks like it
to go that came with the machine
regards
Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
will make a
overview of my setup i think.
O sub
M6
#4999 = #5400
O endsub
m2
MDI_COMMAND = M61 Q#4999 in ini
and
net machine_enabled halui.mdi-command-00 in Hal
thanks for the reply.
cheers andrew
On Thu, Sep 28, 2023 at 8:28 PM wrote:
> HI
> Had this same issue yesterday on a mach
Just to chime in here
Rod Webster has been doing a bit of work here with fixing error finishing
read signals.
The realtek drivers that come with the buster iso are not very good and we
get a error finishing read error. This is with a good 4us latency
test. The network card is the issue
I would also help pay someone in a heart beat to fix the trajectory planner.
Some sort of jerk control would be awesome.
It doesn't need to be active in any special cases like spindle
synchronization but just if it worked for 4 axis simple motor at least
would be a game changer
On Wed, 5 Jul
I run a CNC machine shop full time.
We always want the step files. Or SOLIDWORKS files etc.
And we make it own gcode from that.
It would be a nightmare to run someone else's gcode lol.
On Tue, 4 Jul 2023, 17:45 Thomas J Powderly, wrote:
> Hi Nicklas
>
> Maybe you look for old style grid
Adapter plate sounds easiest to me
On Sun, 25 Jun 2023, 21:01 andy pugh, wrote:
> On Sun, 25 Jun 2023 at 04:31, John Dammeyer
> wrote:
>
> > Is there any reason I can't clamp the motor in a vice and pop in two
> holes
> > and tap them with a bottom tap at the spacing of the mounting flange?
>
On Tue, 13 Jun 2023, 16:19 Leonardo Marsaglia,
wrote:
> >
> > Wrong atribution Leonardo. It was posted by Andrew Beck, I was just
> > commenting that it appears Andrew was overdriving the motors a bit.
> >
>
> That's ok Gene :)
>
> I just wanted to clarify bec
Leon I use a cheap Chinese vfd costs about 190usd
And buy a encoder for it. About 50usd and I'm controlling two fanuc
spindle motors here fine.
They auto tuned the motor in about 4 secs and run awesome.
I can get 150 percent torque at zero rpm. If I run a pid loop in linuxcnc
almost a servo
Hey guys does anyone know what who is making this CNC.
Looks very very cool
https://youtu.be/Nl16dcKmius
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
> John
>
> -Original Message-
> From: andrew beck [mailto:andrewbeck0...@gmail.com]
> Sent: May 24, 2023 7:36 PM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] CNC lathe show and tell.
>
> Hey guys this might interest people.
>
>
> https://youtu.be/43
Hey guys this might interest people.
https://youtu.be/43dDKU2GlnA
Just a job I did yesterday on my and lathe.
I kinda like it now.
3500 max rpm
I think it's threading at about 900rpm
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
> On Wednesday, April 12, 2023 at 08:46:39 PM CDT, andrew beck <
> andrewbeck0...@gmail.com> wrote:
>
> Hey guys this might help someone with a retrofit somewhere
>
> https://youtu.be/vARlybdtC6Q
>
> ___
> Emc-users mai
Hey guys this might help someone with a retrofit somewhere
https://youtu.be/vARlybdtC6Q
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Sweet well that works great for now
On Sun, 12 Feb 2023, 04:56 Andy Pugh, wrote:
>
>
> > On 11 Feb 2023, at 00:28, andrew beck wrote:
> >
> > it looks like the wear offset is not
> > separated and i don't know to change x and not z
>
> Oh, yes. Thinking
up wear offsets so that next time someone can search for that
regards
Andrew
===
O sub
(debug, Tool requested = #)
# = [1 + FIX[ # / 100]]
# = [# MOD 100]
M6 T#
G43 H#
O100 IF [# GT 1
Andy Pugh, wrote:
>
>
> > On 10 Feb 2023, at 06:42, andrew beck wrote:
> >
> > Does anyone know who wrote the fanucy style wear offset remap?
>
> I did it.
> Note that I have never used a Fanuc machine.
> >
> > It would be good to change it to
just be something I have to live with. But it's
worth asking the question.
Regards
Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
!
And it's really cool the tormach guys are getting involved.
Regards
Andrew
On Fri, 3 Feb 2023, 04:50 Jon Elson, wrote:
> During one of the LinuxCNC group chats, I got myself elected
> to set up a US meeting of LinuxCNC-interested people.
>
> After checking several possibilities, Tor
And I have several CNC machines here for testing.
If you guys need someone to test stuff
One if them is a linear rail machine that really really feels the lack in
the current TP so would be good to see the difference
On Thu, 2 Feb 2023, 06:51 John Dammeyer, wrote:
> I've just been emailed
to loop the g code
On Fri, 27 Jan 2023, 15:12 gene heskett, wrote:
> On 1/26/23 16:42, andrew beck wrote:
> > hey guys
> >
> > just wanted to let people know i just made a tutorial on custom m codes
> and
> > i couldn't find much info on it and wanted to help the next guy
#262959
and also if any of you machinists have good tips for bar pulling on a cnc
lathe i would love the ideas i have never done it before
regards
Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
Ken can pathpilot do 5 axis?
On Thu, 26 Jan 2023, 12:29 , wrote:
> My understanding is that it is open source.
>
> -Original Message-
> From: Murray Lindeblom
> Sent: January 25, 2023 5:48 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Running PathPilot on
most of the time.
I know linuxcnc has them but haven't bothered to set them up yet.
Anyway you guys might be interested in this.
And all the awesome developers might be interested to see what we can do
with all their hard work.
Beck CNC.co.nz
Regards
Andrew
On Wed, 25 Jan 2023, 10:30 Moray
Just a quick note.
I think they run a standard mesa card.
On Tue, 24 Jan 2023, 18:22 John Dammeyer, wrote:
> -Original Message-
> > From: Ron Ginger [mailto:rongin...@roadrunner.com]
> >
> > I would like to try to run PathPilot on my own mill. I now run Mach4,
> > but I would like to
hey guys wants to calibrate a touch screen and is missing this info i
wanted to post it on the user list
i have a older elo touch screen and gave up calibrating it and getting it
to work. it responded to touch but didn't follow the touch points.
then saw this post from kurt (one of the
That's cool can we listen in?
On Thu, 19 Jan 2023, 02:21 , wrote:
> Wednesday, January 18, 2023 at 19:00 UTC, 11:00am Pacific Standard Time
> (California), 2:00pm Eastern Standard Time (New York), 7:00pm London
> time, 8:00pm Central Europe time:
>
>
Hey guys
Looking for a Chinese industrial touch screen that people have checked
works on Linux.
There was some links to AliExpress floating around but I lost them
They don't need to be massive but I'm trying to go touch screen style if I
can
Regards
Andrew
Hahaha yep founds those issues a few weeks ago
With the compare functions
On Wed, 30 Nov 2022, 06:25 Sam Sokolik, wrote:
> also - you can't have spaces.. or it fails with no error. But once you
> know the little nuances - it is pretty cool!
>
> On Tue, Nov 29, 2022 at 11:21 AM Sam Sokolik
Hey guys I made this video last night of my machine running on a part
thought you might like it.
Running linuxcnc and preloading tool for toolchange
Plus 4th axis etc
I'm hoping to start making a lot of these to both advertise for my machine
shop and to show how good Linux CNC is.
And that you
hey guys some of you have probably seen this
if not check it out
I saw mention of a S curve lookahead and jerk control and am getting very
interested at this point
it looks amazing as a control absolutely awesome
Ok guys toolchanger works mint now.
I'm looking for a 4th axis config now.
Anyone got any I need to set up my 4th axis for a job
On Wed, 9 Nov 2022, 09:38 andrew beck, wrote:
> Yeah that's a pain
>
> I currently use the tool prepared pin to make sure it's prepared lol and
> stop
M3
> M66 P0 L2 Q10
> M5
> T__ tool change...
>
> Or have I missed something?
> Thanks
> John
>
> > -Original Message-
> > From: andrew beck [mailto:andrewbeck0...@gmail.com]
> > Sent: November-08-22 2:20 AM
> > To: Enhanced Machine Controller (EM
Yeah that's a pain
I currently use the tool prepared pin to make sure it's prepared lol and
stop a toolchange if the correct tool is not in spindle
On Wed, 9 Nov 2022, 08:55 andy pugh, wrote:
> On Tue, 8 Nov 2022 at 19:10, andrew beck wrote:
>
> > but its not preloading tool
>
to load instead of doing it while the
program is running
when i type t1m6 the IOcontrol tool prepare pin goes high
then once tool is selected the IOcontrol tool prepared pin goes high and
then the tool actually gets changed with the m6 command
anyway do you guys have any ideas
regards
Andrew
tried that and it's orientating fine at the moment.
And very simple compared to m19 stuff.
I'll finish it tomorrow and might make a video to show you guys.
On Tue, 8 Nov 2022, 23:15 andy pugh, wrote:
> On Tue, 8 Nov 2022 at 04:50, andrew beck wrote:
>
> >
> > i am usin
i found this thread and it helped a bit
https://www.forum.linuxcnc.org/24-hal-components/45820-spindle-orient-pid-tuning-re-solved-yay?start=50
regards
Andrew
On Tue, Nov 8, 2022 at 12:19 AM Phill wrote:
>
> Original message From: andy pugh
> Date: 7/11/22 10:02 pm
I got a 10position tool changer and the turret choses the fastest direction
to select new tool.
On Tue, 8 Nov 2022, 11:44 andrew beck, wrote:
> I use classic ladder.
>
> It's pretty easy.
>
> But Andy's component will be better probably
>
> I can send you my classic ladde
I use classic ladder.
It's pretty easy.
But Andy's component will be better probably
I can send you my classic ladder stuff though if you want
On Tue, 8 Nov 2022, 09:05 John Figie, wrote:
> I have made more progress on the Clausing NC. My DC servo dives operate in
> Current Mode and are
That's a good idea
I'll try it
On Fri, 4 Nov 2022, 08:03 andy pugh, wrote:
> On Thu, 3 Nov 2022 at 18:52, andrew beck wrote:
>
> I'm getting some funny behaviour with reading inputs with gcode to.
> >
> > It's like they are not actually waiting for the input to read true.
for at least one full rev
M19 P0 ; carry on.
On Fri, 4 Nov 2022, 01:33 andy pugh, wrote:
> On Thu, 3 Nov 2022 at 09:23, andrew beck wrote:
>
> >
> > looking for a way to set the index pulse high on the mesa card input
> before
> > triggering a m19 for to
hey guys
looking for a way to set the index pulse high on the mesa card input before
triggering a m19 for tool change as a safety check
i have a g code sub that i have remapped for m6 and it moves the spindle to
toolchange position and then activates m19 r0 which spins the spindle to
the correct
And it would be great to output a file you can save and reuse and combine
manually later in needed
On Fri, 28 Oct 2022, 14:19 Chris Albertson,
wrote:
> I was just going to write that what is needed is a good "conversational"
> interfasce for LCNC.
>
> You do NOT need to modify LCNC to do this.
to use any linuxcnc conversational stuff. pretty keen to
try it just couldn't work out how to install it and gave up.
cheers
Andrew
On Sat, Oct 22, 2022 at 11:14 PM andy pugh wrote:
> On Sat, 22 Oct 2022 at 03:02, John Figie wrote:
>
> > CAM is included with Fusion 360 addition
on this non standard high speed motor that
yaskawa and schiender drives both failed on
regards
Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Rob C do you know what is the latest way to install native cam?
it definitely looks cool and would be great to have conversational g code
generators finally when i can't be bothered with the cam
i am running 2.8.3 so i think its still python2 and we are good to go
On Fri, Jan 28, 2022 at 8:13
you guys.
So just thought I would ask.
I know a bunch of you.
Chris
Andy
John
And many others
you guys know lots of electronics
Regards
Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists
ll create one upon startup.
>
> Todd Zuercher
> P. Graham Dunn Inc.
> 630 Henry Street
> Dalton, Ohio 44618
> Phone: (330)828-2105ext. 2031
>
> -----Original Message-
> From: andrew beck
> Sent: Tuesday, August 16, 2022 3:14 AM
> To: j...@pibf.de; Enhan
Hey guys just want to report back!
We got it working.
We had a working 7c80 file that was close and just copied and pasted the
config into a dummy one from pnconf
Worked a treat.
Hey quick question
Does anyone know how to make a desktop Linuxcnc launcher.
I got lost
On Thu, 11 Aug 2022,
I would weld a lathe parting or grooving tool to a round shank at about the
right dia cutter
And away you go.
Easy
On Tue, 16 Aug 2022, 3:23 pm Gregg Eshelman via Emc-users, <
emc-users@lists.sourceforge.net> wrote:
> How thick is it axially? If it's pretty thin it should be sandwiched
>
Awesome
We will have a look
On Thu, 11 Aug 2022, 3:45 am , wrote:
>
> This configuration works for me:
> www.talla83.de/linuxcnc/iHSV57_2_8.zip
>
> From:
> https://www.youtube.com/watch?v=A5QgvOsf7nI
>
> Joachim
>
>
> ___
> Emc-users mailing list
>
That was a good idea martin
https://forum.linuxcnc.org/27-driver-boards/38899-raspberry-pi-4-with-mesa-7c81?start=10
Wayne look at this
On Thu, 11 Aug 2022, 1:43 am Martin Dobbins, wrote:
> Hi Andrew, Wayne,
>
> Try including 7c81 in your searches, you'll get more hits
&
And I'm helping him here in the ground guys.
We want a config to get started.
And gene are you still using these boards?
On Wed, 10 Aug 2022, 1:41 pm wayne dalton, wrote:
>
>
>
> Howdy
> My names Wayne Dalton , I’m in New Zealand .
> I have these 2 units (7c80 and rpi4) and I’m working
Bari
Could we see some photos?
On Wed, 20 Jul 2022, 5:46 am Bari, wrote:
> Todd,
>
> We have used LCNC on everything from DNA synthesizers to hybrid additive
> manufacturing printers to all sorts of custom CNC machines and factory
> automation.
>
> www.onelabs.com
>
>
> -Bari
>
> On 7/19/22
And I got few in new Zealand
On Sat, 25 Jun 2022, 06:52 Peter C. Wallace, wrote:
> On Fri, 24 Jun 2022, Ralph Stirling wrote:
>
> > Date: Fri, 24 Jun 2022 15:28:17 +
> > From: Ralph Stirling
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To:
This is a good one for Phil (feral engineer)
On Wed, 15 Jun 2022, 06:16 Jérémie Tarot, wrote:
> Le mar. 14 juin 2022 à 19:59, andy pugh a écrit :
>
> > On Tue, 14 Jun 2022 at 18:45, Jérémie Tarot wrote:
> >
> > > Maybe the first thing that's unclear is: is there really a difference
> > >
Hey guys
Has any one made a g84 pecking tap cycle yet with a retract value.
It would be great to have for deeper holes.
I tap a lot on my cnc machines now. Thousands of holes.
Really getting into the retrofits.
And doing them for other friends that run machine shops now
a searchable format that can be
referenced later. And especially for the new users it's so great to have.
On Wed, 1 Jun 2022, 16:38 gene heskett, wrote:
> On Tuesday, 31 May 2022 18:44:31 EDT andrew beck wrote:
> > hey guys
> >
> > just dropping a link here for anyone that needs
a better idea please let me know and feel free to post
it up on the forum post Below
Regards
Andrew
https://forum.linuxcnc.org/show-your-stuff/46058-classic-ladder-lube-pump-that-only-runs-while-machine-is-moving#244315
___
Emc-users mailing list
Emc
>
>
> On Tue, 17 May 2022 at 06:21, andrew beck
> wrote:
>
> > Hey guys check this out.
> >
> > Randie machine tools was nice enough to make some videos of how his press
> > break runs on Linux cnc.
> >
> > https://youtube.com/playlist?list=PLhCy
Hey guys check this out.
Randie machine tools was nice enough to make some videos of how his press
break runs on Linux cnc.
https://youtube.com/playlist?list=PLhCy_m8WY5DuOcdPjI-QhJmUv_I5XdZes
Looks not far off a delem controller.
Pretty sweet setup
Hey guys check this out.
Randie machine tools was nice enough to make some videos of how his press
break runs on Linux cnc.
https://youtube.com/playlist?list=PLhCy_m8WY5DuOcdPjI-QhJmUv_I5XdZes
Looks not far off a delem controller.
Pretty sweet
On Thu, 28 Apr 2022, 05:24 John Dammeyer, wrote:
operation.
On Thu, 12 May 2022, 20:58 andy pugh, wrote:
> On Thu, 12 May 2022 at 00:33, andrew beck
> wrote:
>
> > normally the chips are just green and black. they can be colored in
> with a
> > red marker if they are faulty and then we want this sensor to detect
>
thanks Ralph
yeah they are costing about 280usd at the moment from Omron for a sensor
that you can dial up on the fly to only sense for red or something i think
and no other colors
maybe this is just what they cost
ok we may just have to bite the bullet and get them
regards
Andrew
On Wed
be connected with a PLC to have a simple trigger
on or off .
you guys got any ideas?
regards
Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
The China option costs 200 bucks and just works too. Though yaskawa is
great!
Actually for anyone that's interested I get all my servo motors and vfds
from a company in China yuhai. (Yaskawa copy)
I have been dealing with Bill their sales man for 5 years and must have
bought about 30 servo motor
May 8, 2022, 5:54 AM Viesturs Lācis
> wrote:
>
> > Umm but what makes you think that this is LinuxCNC? There is nothing
> > in description and I did not hear any comments in background. Did I
> > miss something?
> >
> > Viesturs
> >
> > trešd., 2022
Gene
Just use a counter with classic ladder.
Easy as
On Fri, 29 Apr 2022, 08:13 gene heskett, wrote:
> On Thursday, 28 April 2022 14:55:24 EDT andy pugh wrote:
> > On Thu, 28 Apr 2022 at 19:50, gene heskett
> wrote:
> > > Ack the switches on the driver, its doing a /16 microstep. its a 1.2
>
Hey guys
Does anyone know who built this?
I'm hoping he will allow us to have a look
https://youtu.be/atD7sn25XTY
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I think it is just in programs.
Mdi still works fine
On Mon, 25 Apr 2022, 11:33 Leonardo Marsaglia,
wrote:
> Seems strange. Does it happen also when you hit M65 in MDI?
>
> I constantly use M64 and M65 from MDI without any GCODE and I always get an
> instant response. I really can't tell if
I think you need to put a g code in there to make it work. I had this
problem
You just put a g0 after every line of mcode
And it works
On Sun, 24 Apr 2022, 04:19 Nicklas SB Karlsson, wrote:
> Made two small g-codes files to manually lock and release chuck. There
> are two signals one is
Hey I won't be much help but I would love to see how you did a break press
gui!
On Sat, 23 Apr 2022, 03:26 Ted, wrote:
> Good morning!
>
> I've been working on converting an old Cordax CMM to more current
> technologies and am wanting to start building out the user interface.
> (The basic items
You can buy cheap cbn inserts from aliexpress to that work fine for
hardened steel
On Thu, 7 Apr 2022, 07:22 Sam Sokolik, wrote:
> The cross slide has around 17 inches of travel... Crazy..
>
> https://photos.app.goo.gl/Z4NKdazgTGVAkPtD8
> https://photos.app.goo.gl/hjk4Wb4kbZAjTnRZ9
>
> sam
>
>
Thanks guys
I will see how this goes.
And sounds like it should be easy as
Does anyone know how to wire sensors to mesa card encoder? Are they pnp or
npn?
Or can I just wire them straight into encoder input?
Regards
Andrew
On Fri, 1 Apr 2022, 07:30 Lawrence Glaister, wrote:
> Hi And
-fun-thread
Regards
Andrew
On Sun, 27 Mar 2022, 22:21 Andy Pugh, wrote:
>
>
> > On 27 Mar 2022, at 08:09, andrew beck wrote:
> >
> > And is bigger dia better for higher resolution?
>
> Probably not, as it will perhaps have more scope to oscillate at 10,000
>
drature and lets say one is being blocked and one is not,
> I
> > think you want the turnaround to take as long for each sensor.
> >
> >
> > On Sun, Mar 27, 2022 at 2:22 AM Andy Pugh wrote:
> >
> >>
> >>
> >> > On 27 Mar 2022, at 08:09, and
I have done that cutter size mistake on a 4k block of material before lol.
Oops
On Mon, 28 Mar 2022, 08:40 gene heskett, wrote:
> On Sunday, 27 March 2022 15:20:22 EDT John Dammeyer wrote:
> > Just don't do what I did which is design the plate for a 3mm cutter and
> > then start the LCNC G-code
are the
> > > same in either direction. The 50% duty cycle in effect doubles the
> > > sensor resolution.
> > >
> > > Why? Think about the signal when the direction changes. You have
> two
> > > sensors in quadrature and lets say
;
> On Sun, Mar 27, 2022 at 2:22 AM Andy Pugh wrote:
>
> >
> >
> > > On 27 Mar 2022, at 08:09, andrew beck
> wrote:
> > >
> > > And is bigger dia better for higher resolution?
> >
> > Probably not, as it will perhaps have more scope to
it doesn't matter
On Sun, 27 Mar 2022, 22:21 Andy Pugh, wrote:
>
>
> > On 27 Mar 2022, at 08:09, andrew beck wrote:
> >
> > And is bigger dia better for higher resolution?
>
> Probably not, as it will perhaps have more scope to oscillate at 10,000
> rpm.
>
> Don
guys have already done this I would appreciate the advice.
Cheers
Andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
пн, 7 бер. 2022 р. о 20:32 jeanfrancois пише:
> Hi,
>
> Are there such lasers with this precision level ?
> What kind of budget is that ?
>
See
https://www.keyence.com/products/measure/laser-1d/lk-g3000/models/lk-g502/
long range
or
пн, 7 бер. 2022 р. о 19:47 Thaddeus Waldner пише:
> Hi,
>
> I’m looking for a laser distance sensor with about 1-3 thousandths
> resolution and about a 5-10” working range.
> I wouldn’t mind buying a used unit.
>
> Does anyone here know of some brands/ models to check out?
>
> Look for Keyence.
Torque servo tuning now I think I can help on and also spindle orientation.
On Fri, 4 Mar 2022, 21:25 andrew beck, wrote:
> I copied and pasted it from the forum someone else did the hard work
> and I heartily thank them
>
> But this should be added to the docs really I think.
1 - 100 of 1068 matches
Mail list logo
